The music stops playing when you use Instagram

Similar Questions

• I have pod 'freezes' on the last song played when you use find in my car

  I have a 2013 ford edge. When I use the research of a characteristic of the song from the radio of my car, the Ipod will play this song it but no other song will play until I re - download my music from my music section Apple. Curiously, the music shows as always on the ipod, but for some reason, the search function on my stereo causes the ipod to 'freeze' on this song.

  How can I use my car search function without causing the ipod to 'freeze' on this song

  Done this job before, with the car audio system and your iPod and does not now for some reason any?  Or you try to use your iPod in your car for the first time?

  the Ipod will play this song it but no other song will play

  NOTE: On a recent car audio systems with a USB port to connect devices, car audio system makes playing the song.  The iPod is just there to act as a storage for the files of the song.

  So the problem is likely to be the car audio system, problems to access the songs stored in the iPod.  This could be due to a problem of equipment, such as a failed hard drive in the iPod, or maybe it's the corruption of data.  You can restore the iPod using iTunes.  This erases the iPod, reinstall its software and sets it to the default settings

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  After the restoration, re - sync your songs.  If the problem is only data corruption (and the iPod worked properly in your car), the restoration (and re-synchronization) should solve the problem.

• You met the C00D10D1 error message when you use Windows Media Player

  Hello

  I have no sound through Windows Media Player and also a player from Youtube and BBCi.  I have the following error message, please notify :-)

  You met the C00D10D1 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Codec is missing

  Windows Media Player cannot play the file (or can't play the part of the file either audio or video) because theMP3 - codec MPEG Layer III (55) is not installed on your computer.

  The missing codec may be available for download on the Internet. For more information about codecs, seeCodecs: frequently asked questions.

  Hello
   
   
  1. What is the file type or extension that you try to play?
  
  If you get a message stating that your computer is missing a codec, you are probably trying to play, burn, or sync a file that was compressed by using a codec that does not include Windows or the default player. You will need to download codecs.
  Player Windows Media for Windows XP supported Codecs
  http://support.Microsoft.com/kb/291948
   
  Package of Installation of codec
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en
   
  See also:
  Windows Media Player C00D10D1 error: MP3 - MPEG Layer III (55)
  http://Windows.Microsoft.com/en-us/Windows7/C00D10D1-55
   
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
  Note: The above are published in the Windows 7 category, but they apply to Windows XP too.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to choose the display by default when you use two screens on my Mac Pro?

  How to choose the display by default when you use two screens on my Mac Pro?

  The default view when you have several is made that you drag the little icon in the menu bar in this pane:

  

  .

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Is it normal in the 6s overheating iphone when you use a wi - fi connection

  is it normal in the 6s overheating iphone when you use a wi - fi connection

  Overheating is an over-used and misunderstood term.

  An iPhone will turn off if it reaches dangerous temperatures.  Leave in the Sun on the beach and you see him give a warning of the temperature and turns off.

  And Yes, all that the phone will give a little heat.  It's basically a fan less computer that uses the metal case as a heat sink to the warmth of the wick away from the card.

• How can I prevent the access denied message when you use the shutdown command?

  I use shutdown /m \\computername/s

  I have "Access denied (5)" as an answer.
  I am admin on all my computers. Same username and password on each of them.
  How can I get this shutdown command to work remotely, so I can't access every computer command prompt via Remote Desktop?
  How can I prevent the access denied message when you use the shutdown command?

  Hello

  I suggest you to report this issue in TechNet Forums for Windows 7 networks: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/threads

  Thank you.

• Move the point of origin when you use the scale tool

  Hello

  Can someone tell me if it is possible to move the point of origin when you use the scale tool? By default, when I change by dragging an anchor of the corner, the opposite corner is used as the origin. Ideally, I would like to to scale using an origin that is biased, I can specify sort. I know that you can do during the rotation, but I was not able to determine if this goal is achievable during the measurement. I use Illustrator CC 2015.3.1 and Mac.

  Any help would be appreciated.

  Thanks in advance

  Jason

  Click where you want the origin to be. Or move the reticle. Exactly the same as with the rotation tool.

• CC of Dreamweaver generates one of the 3 error messages when you use find and replace on 8.1 Win 64 bit.

  CC of Dreamweaver generates one of the 3 error messages when you use find and replace is used more than twice in a row. "While executing onLoad in bc_afterSave.htm, the following JavaScript error occurred: at line 188 of file C:\Program Files (x 86) \Adobe|. Adobe DreamweaverCC | Configuration | Shared | ' BC\JS\bc_sites.js': out of memory.

  or

  When executing RunCommand in File_Save.htm, a JavaScript erroroccurred.

  or

  While exciting getDynamicContent inAdressURL.htm, an erroroccirred of Javascript.

  Any thought - I find myself CBWMS of closing and reopening. Will work for the other two find and replace once again before the popup of messaged\s error.

  Cough, cough, cough - 38 500 pages? !  Really?  It's a big site!

  I'm not surprised, that you are short of memory.  Try to limit your F & R records or select files rather than the entire Site.

  Nancy O.

• If the data is empty when you use to_date(?,'yyyy/mm/dd') insert a file into db

  online form insert the? is user input, if the user entered the following works find, but if the input file is empty insert get an error, how to handle
  If the data is empty when you use to_date(?,'yyyy/mm/dd')
  Thank you

  Be more specific.

  You try to insert this in a column that is defined as not null?

  If so, you can choose a default value for the value that you want to use if the user leaves the field to the white screen.

  Or, better yet, use the validation of the front to prevent them from going into an empty space (or perhaps failed it there).

  However, if you still want to do it in the DB:

  Insert into table1 (non_null_date_col)
  values (to_date (nvl (?, '' 2199/12/31), "dd/mm/yyyy"));

• How to make the menu letters more when you use Lightroom 4?

  How to make the menu letters more when you use Lightroom 4?

  Hey Lenovo W510,.

  The police of interface only option in Lightroom of sizing is in the preferences > Interface > panels > Font Size (Small/Large)

  The configuration in grand and then restarting Lightroom will increase the fonts you see in the signs that describe the functions of LR.

  If you're on Mac or Windows you might also decrease your screen/display resolution that will make everything look bigger on your screen.

  Hope this helps,

  Kind regards

  Pete

• AS3: How an instance of flvplayback stop playing when you leave its frame in the timeline?

  I created a small theatre program and it is working very well, but I cannot for the life of me understand why it works without additional code.

  I have a timeline with frames 5 and last 4 executives have a different instance of an animation flash (flvplayback) in them: all of them charge a different movie as its source and I don't give instance names to one of them.

  To get to one of these frameworks, there are 4 buttons and the eventlistener to click a button calls a function that specifies which image to go to and stop at the.  Since each flvplayback has autoplay set to 'true', the movie starts to play when you enter its framework.  If I click a different button to get a different picture, this first film stops play and the video in the 2nd starts frame.  I have not any actionscript in saying the first movie to stop and I can't find anything in the AS3 reference that suggests that the flvplayback component could work this way.  Why didn't I tell an flvplayback instance programmatically to stop when I'm out of its frame in the timeline?

  Thank you

  Sean

  If you leave its framework there are more.  But from other postings I've seen, people most often ask why he always plays because they can hear the continuous sound even if they left the frame.  I think in your case what could have to do with you based on components in the adjacent blocks, such that you essentially load a new source in the player.  There is an anomaly MNI Flash where if you place instances of the same object in adjacent frames, the latter inherits the properties of the former, essentially becoming it.  Then you fall into this scenario where essentially the same player is told to change what he is playing.  You could try to stagger the instances with empty frames between and see whether you get similar results.

• Problem with the pop-up windows when you use Safari

  Since Friday, February 12, 2016, when you use Safari, I get pop-ups on various internet sites.  Then I get a pop-up message for Massachusetts users to contact Apple Support @ 1 866 405 - 2214.  (http://www.ris4.com':).

  Use the EtreCheck to www.etrecheck.com and see what is running on your Mac.

  Perhaps you have Adware/Malware.

  But DO NOT contact this fake/Scam Apple support.

• Need to reset the button by default when you use the structure of the event?

  When you use the buttons with a mechanical action "releasing lock" to only trigger the same structure with the same 'value has changed', the button does not jump upwards as you would expect.  I can get to behave as I want by adding a "default reset" invoke the node, but this seems somewhat exaggerated.  Is there an easier way to get the button to jump to the top after pressing on?

  The button will reset once it is read by the code. This means that the terminal is inside the structure of the event. If you move outside the terminal, it would read only the beginning of the race and then never and it will not be reset.

  If the terminal is learn the structure of the event, it is read by the code (even if it is not connected to anything) and it reset as soon as the event has a chance to run.

• Port on which I check and apply in the window properties (XP) when you use a hp photosmart C4280

  Hello, help?

  Can someone please tell me what port should I check and apply in the properties when you use a Deskstop PC running Windows XP on a HP photosmart C4280 printer?

  When I checked the ports in the properties, none have been checked

  Thank you

  Poacherpete wrote: Hello, help? Can someone please tell me what port should I check and apply in the properties when you use a Deskstop PC running Windows XP on a HP photosmart C4280 printer? When I checked the ports in the properties, none have been checked. Thank you

  Hello Poacherpete, I would download the latest version of the software for your printer for Windows XP that's found its

  It is a link that contains information on how to set up your printer in Windows XP. It is a USB cable to the printer connection