The 'My Computer' is slow to/or/not will not respond.

Similar Questions

• Computer is slow and sometimes not responding

  Original title: I search for viruses and spyware in my cp and very slow and sometimes irresponsible steel

  My pc is slow and sometimes unresponsive, I search for viruses and spyware and is clean.

  Hello

  1. what operating system is installed on your computer?

  2 have you made changes on the computer before this problem?

  You can follow the steps mentioned in the link.

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=OaiGOY3pEJF

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  Warning of CHKDSK
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  Note: make sure that you back up the data before proceeding with the disk check.

  Please provide us with more information to help you further.

• Error: "a copy of the game Manager is already running & may not respond. Please end-game manager & reboot computer. "when tried to open the game Manager, big fish games or applications

  Original title: http://www.bigfishgames.com/usher/index.php?siteID=1&langid=1__application not found

  When I try to open game from big fish games or the game Manager application, I get this error.  only, this started about 1 month ago.  before that, I had no problem with the application at all.  I also got the message: "a copy of the game Manager is already running & may not respond.  Please end-game manager & reboot. "even if there is nothing running.

  Hi nanawanda,

  According to the error message, try the following steps and check the result.
  Step 1: End game Manager and restart the computer.
  Step 2: Start the game Manager and check if the problem persists.

  See What is the Manager of games?
  http://bigfishgames.custhelp.com/app/answers/detail/A_ID/157/related/1/c/2805/page/2/r_id/109674

  If the problem persists, post your query to the Big Fish Games Forums:
  http://forums.bigfishgames.com/forums/list.page

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The remote session was disconnected because the local computer client access license could not be upgraded or renewed on Windows xp

  Hello

  I have Windows server 2003 I have the server license terminal server, but one of my XP machine, which I'm calling his error remote desktop by giving as below
  The remote session was disconnected because the local computer client access license could not be upgraded or renewed on Windows xp.

  Thank you
  Deepak Labonté.

  Hello annelabonnote

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2003 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding)

  Hello

  My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding).  All the other computers in my house are connected without difficulty.  Any suggestions?

  Thank you

  I solved the problem.  When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router.  When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.

  Thanks for your help!

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

  Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

  Hi TG24.

  Acrobat Reader 16.09.21 is now available in the App Store.

  It should solve the performance problem that you are experiencing.

  We apologize for the inconvenience.

• I have a problem with the computer is slow and does not file.

  1 of my pc and 1 another laptop, both with same OS - win 7 starter, atom and same ram and Ghz processor.

  The the Task Manager on the two of them performing at about 50%
  I use wifi and same place,
  always pages on my pc are load too late, manyatimes same gmail takes more than an hour to load or load never at all.
  Live TV on my pc crashes a lot and the clarity of the video is too bad, although the same graphics card, wifi, etc. are used.
  Any recommendation to get rid of these problems?
  2. some viruses had infected my pc,
  I tried to scan my pc and the USB with 2 antivirus free and pay different and even contacted the companies and sent them files. But I got no solution.
  On my pc, the files opens, show that a few errors before you open it then on my cell it do not open at all. Only shortcuts are displayed, while the USB is to have 4 GB of data.
  The companies had scanned all files that are intended for them and had recommended some solutions, but none of them worked and I was faced with the same problems.
  It was queries that I had sent to the antivirus company-
  10-20-bitdefender files that are
  > infected. They were initially on my USB, then I connected to another
  > pc. After that, when I connected to my pc, I scanned and that she was
  > no virus. Then the ameliiecouturiaux and the files whatever i seclect opened in a
  > new window and took that wasannoying time. So I copied all the files to my
  > pc, yet once scanned, formatted my USB and then comes the againNow copiedit the
  > problem - all the icons or folders remain the same with the name of the folders but
  > the files inside this foldergot automatically changed and I lost all my
  > data. Now, I can't find any of my files on my pc or my USB. PL send me
  > an email so that I canattach the files and send them to bitdefender. Dungeon of pl
  > secure these files. Some files have an another new error that I had
  > downloaded. More files will be downloaded once I have bitdefender recieveemail to
  
  > that I can answer. PL copy this message in its entirety and add this to your answer.
  According to my knowledge, 2 of my PC are infected and the virus are not getting detected by bitdefender on my PC1 but 4 threats have been detected on the laptop...

  The same files are include the other way on my other pc.

  Whenever I open the files, save option opens and a new file is saved with the file tha but they never get to open in word or powerpoint, only the backup option is displayed.

  The original files are protected by copyright and are lost. PL help me if possible to retrieve and delete all the files once the inspection is completed. You can forward this message to any authorized person.

  Attached files have changed to 1 or 2 k, but there was initially datas in a few MBs.

  201310131003535. I mentioned that somewhere I had formatted the USB key. Just before that, I had copied all files by selecting CTRL A and cut all the files in a directory on my PC. Then I opened the USB and no files were there. But always around 4 GB has been shown as being busy on the USB stick before formatting.
  My pc takes too long to restart, I tried a few 3 - 4 times and no updates have been installed or waiting to install after the 2nd time but when even he took more time than usual to restart and is compared to the other pc taking 2 X the time to restart, but two of them have installed bitdefender. Problem in my laptop toshiba, not pc lenovo, space time with more than 50 percent on the disk processor and Atom c.
  The files on my USB key are automatically replaced by shortcuts and so files open in a new tab and new cases opened are not those of origin who have been saved by me in this matter. Yet once I formatted and scanned, files, pc and USB but still facing the same USB key.
  Problems-

  1. all files are automatically displayed as shortcuts, even if I had pasted the original file

  2. once I click on open, I get an error and then after clicking on ok, some files get opened

  Before sending the email, I had formatted the USB scanned files on my HARD drive and then copied on the USB. The same problem persists. I think that when the files are displayed or open, the virus does something and change his behavior wrongly.

  1 bitdefender watch as new bitdefender is available, I click ok and repair wire starts and then it tells the system to restart.this cycle continues on the race

  2. 2 files are missing (attachment)

  3. could you send me the file by e-mail?  You can also download the link below.

  http://labs.BitDefender.com/

  because the webste or browsers (chrome, firefox) are not respongding.

  4. I could get these 2 points. Browse your computer to locate the removable storage device and right click

  its icon.
  3. in the shortcut menu, point to Bitdefender and select immunize it
  
  drive.
  I am able to open my pendrive ffrom on 1 pc but on my laptop, all the files don't appear as shortcuts 1-2 KB and can not access.
  zwhwenever, I click the icon, the window save under opens for all files.
  on this pci usingbitdefender antivirus am more 2013 16.34.0.1913 downloaded from download.com and the antivirus from bitdefender 60 seconds. 1.0.3.59
  my pc shows the USB key as safe, but laptop with 2 antivirus mentioned above are showing 2 virus - worm.vbs.ch (bitdefender 2013)
  using bitdefendr 2013 more on laptop, I tried to immunize the file but an error was encountered.
  the error is in German-
  Der process nicht auf die Datei zugreifen kann, da sie von einem other process verwendet wird. I closed all the files and tried to immunize the USB of the my computer without having to open the USB by clicking on it.
  Itried to remoe and atach the pendriveagain and even restarted the laptop, but the same error message appeared.
  Properties - 5.10 GB ref 7.89 GB, but when the USB wasopened, all files were only 2 or 3 KB of size.
  1 more problem-i tried to delete the files in quarantine but bitdefender stopped working and went off automatically.
  I copied all the files from USB to pc, they were 2.22 GB, then again, I copied them back after scannig and formatting of topendrive and it was only 1.44 GB
  BitDefender Antivirus 2013 never works and always displays the message to restart the laptop so that it can start working, but it neverstarts. But bitdefendeer 60 seconds work.

  LOL - install software Registry Cleaner to fix damaged or broken registry entries.

  More likely to worsen the situation.

• Help start the old computer system32/hal.dll error not installed bugs not working-

  I want to transfer files from your old computer to new computer with Vista Easy Transfer.  In an attempt to start former computer, received the system32\hal.dll error.  I followed the instructions to fix proglem reboot, press / hold down f8, etc., but that has not worked.  I could reinstall the operating system Microsoft Windows XP Professional, including Service Pack 1. But if I do then I lose all files, documents, photos, everything from the old computer... at least, I think it's going to happen.  Can you tell me what are my options to ensure that I don't lose any of my data.

  This behavior can occur if one or some of the following conditions are true:

  By default in the [Boot Loader] section of the Boot.ini file is missing or invalid.

  Windows XP is not installed in the location specified in the Boot.ini file.

  The Ntoskrnl.exe file is missing or damaged.

  The path of partition in the Boot.ini file is not set correctly.

  General failure.

  The article below should help you solve this problem.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  You must have a Windows XP installation disk to perform the steps listed in the article above.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I transferred CS5 to a new computer using the PC transfer program. CS5 starts on the new computer, OK, but now does not recognize raw files. Should I uninstall and reinstall again?

  CS5 I transferred to a new computer using ultimate PC mover. CS5 seems to start normally, I had to insert the serial number of my original CD. However, now, the program does not recognize files CR and Adobe bridge is not working properly.  I get messages that CS5 needs to be updated, but updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer by using the original CD, and then reinstall CS5 using the CD on the new computer?

  I finally got to work. I had to load the files CR of adobe several times but it finally worked. Thanks for your help.

• HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake

  Hi all

  Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.

  But... When I try to do something after the machine is in "standby mode" everything goes wrong.

  1 - printing takes longer path to front.

  2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.

  3 - wireless devices sometimes have trouble with the connection to the device.

  4 - access to the machine via the web interface content (yet) is slower, if not impossible.

  When I manually reboot the printer (using the power button) the machine works fine again.

  But I can't immagine what how HP intends to use the machine.

  Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?

  Also is it possible to disable the sleep mode at all?

  Thanks in advance.

  Kind regards

  By Duringshoff

  The program installation/Specs:

  The printer that is connected to a switch. Connected to the router (wireless).

  Printer is not directly connected to any computer over the network.

  On the printer, I put 'Sleep delay' to '1 hour '.

  On the printer, I set 'Auto Power' down on '' never. ''

  MacBook Pro 13 "under OS X 10.9.1"

  Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)

  IPad IOS 2 7

  IPhone 4 running IOS 6

  router: Cisco EPC3925

  switch: Netgear GS108

  Thanks for letting me know Per_Duringshoff.

  I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.

  10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Let me know when had time to try the steps listed and if it helped.

  Have a nice weekend!
  Thank you.

• How can I update the UI without encountering a ' Application is not responding do not; completed process '?

  I'm trying to populate a table on the screen, and when the user clicks a Labelfield (20 lines are populated by click).

  When the user clicks the labelfield, following takes place:

  (1) a data segment is read from the SQLite database in a background thread.

  (2) data are then filled in the existing table on the screen (by adding more fields to the Table Layout Manager) in the invokeLater() method.

  I am currently facing a problem of ' Application is not responding do not; process is completed ' when I continue to load more items to say about 3 to 4 times (i.e. After about 60 to 80 lines are met).

  I fear that this could be caused by the user interface thread get resisted for a long time, while the population takes place. Is there another way to update the user interface, so that the application runs smoothly?

  I'd appreciate any help that I had with this problem for some time.

  You must use another thread to query the database and then creating and filling in the fields. After the creation of fields use the Manager.addAll () method to add an array of fields (in invokeLater() body of course).

• I am fully connected to the Internet, but my DNS server is not responding. How can I connect otherwise?

  I am fully connected to the Internet, but when I click on my home page and even several other pages, including Windows Live Mail, I get an error message that my DNS server is not responding. How can I work around this problem and to connect to the Internet anyway?

  You want to be sure that you use the right setting for your DNS server.  You can move this in your browser using the digital URL for the what you want to access web sites.  You will find them by using the PING command at the command prompt.  Hold the Windows key and press R.  Then type CMD and press ENTER.  Then enter for example to get the address of the web site of MS PING WWW.MICROSOFT.COM.

  Unless otherwise directed by your Internet service provider, you want TCP/IP settings to "obtain an IP address automatically" and "Obtain DNS server address automatically".  To do this click Start-> Control Panel-> Network Center and sharing-> view status.

  Then click on properties.

  From there, click on Internet Version 6 Protocol and properties.

  Click on the two radio buttons to "obtain an IP address automatically" and "Obtain DNS server address automatically".  Click OK.

  Then click Internet Version 4 Protocol and make the same changes in what concerns the version 6.

  I hope this helps.  Good luck.

  Good luck.

• I need to transfer the Creative Suite 6 from an old computer to a new one. I have a disc. Do I just disable the program on the old computer and install it on the new computer, then turn on? Adobe will recognize that I have only 1 copy in use?

  I need to transfer the Creative Suite 6 from an old computer to a new one. I have a disc. Just disable the program on the old computer and install on the new and then save Will Adobe recognizes that I have only used a copy?  I need to also install the program on a laptop.

  You can use the serial number twice, Learn how to enable or disable Adobe applications

  Concerning

  Stéphane

• The computer crashes; slow to start; Not relevant

  It's all thanks to IT.

  Hello

  You will have to provide much more information to help. Some questions are:

  (1) what you were doing when the computer crashed? What programs have been opened? Running?

  (2) you online were at the time? Had recently downloaded anything? You have applications antivirus and anti-malware on your computer? Have you run analyses with these programs? If so, what was done and what show?

  (3) what do you mean exactly by "inadmissible"? You can do something, or is it just sit there doing nothing? When you say 'slow start', which is just an impression or you timed? If you have timed the start, what are the gaps of time?

  (4) depth OS and little do you have? How much RAM do you have? What and how many programs you load at startup?

  This is the starting point to determine what might happen. There may be more questions that need to ask, but until you have answered these questions, there is little I can do to help you.