the numeric keypad keys do not work
A little different problem here:
Just bought my dv7-1030eb. On this keyboard is QWERTY Belgium (well, i live in Belgium, so it's OK)
Unfortunately, the numeric keypad keys work except for the top 4 (home, end, pgup and pgdn).
Result: I can not activate Numlock.
Trying to connect an external keyboard and activate Numlock.
On the external keyboard, everything works as expected.
On the keyboard internal, still no light locking num (below altec lansing logo), and yet only four albums keys (home, end, pgup and pgdn) operational.
It is also a diagnostic message?
A reply to a message on the page, message 4 @BernsBelgium
It is a problem, that I was just trying to solve on a dv7-1002.
I found that the solution has been updated of the bios.
I was on a version very early and found that I had to do incremental updates. From the one after the current bios, if you try to jump the updates, it fails to the version checks and gives an error "is not any ROM file in this directory"".»
Keys num started working after about five updates and continued to work for the rest. I had to do about 10 updates to get the current bios. The keys are now working very well.
Hope this helps someone else.
Tags: Notebooks
Similar Questions
-
Satellite S50 - B12 - the numeric keypad keys do not work
Problems with the keypad.
My computer is a B12 S50.
The problem is the following:
Keys '.» "3 6 9 *-+ ' keypad do not work.
Only problem I have with these keys, I have no problem with any other key.
The keys above the letters are working properly, but I need the pad on the right to work.My operating system is Windows 8.1. 64-bit, it's the operating system factory. (I don't have not upgraded to Windows 10)
Someone knows the solution?
Thank you all very much.
Satellite S50 - B12
-
The new tab key does not work.
The new tab key does not work when I click it. I reinstalled FF but with no luck - any suggestions would be appreciated.
What can a problem with the Ask.com toolbar (Tools > Modules > Extensions)
See:
-
SpeedGrade will not meet the numeric keypad keys / partially cut 2nd monitor image
Very strange... I just opened a project in Speedgrade. When I started working, I noticed that the keys of the numeric keypad do not work. In addition, the changes made with the mouse are delayed. Apart from that, I use a second monitor and about a quarter of the picture from the left edge is cut. First works very well, it is quite another thing, it's a brand new computer. I tried all the usual stuff like reboot I even uninstalled and re-installed, but to no avail. I use the latest version of speedgrade on a system 4790 Windows 8.1 Intel i7 with 32 GB of RAM and a card GTX 780. Does anyone have ideas, what could happen?
Hello
You did that the display in the window of parameters setting are set correctly? You can manually adjust the resolution of your screen in the second.
For the delay, have you created a mask in your project?
Thank you
Fran
-
Satellite Pro M30 - Win XP - for the brightness of the display FN keys do not work
I just do a fresh install of win xp on a satellite pro M30 laptop.
I installed the drivers bt the fn keys (brightness, etc.) will not work if the screen is very dark!I tried to update the bios, but it won't let me.
Also tried to install the common modules but get an error saying that it didn't is not supported on this hardware!Can someone please help.
I think you need to install the drivers in a specific order.
Is this true? Or y at - it way round this?Any help would be appreciated.
> I tried to update the bios, but it won't let me.
> Also tried to install the common modules but get an error saying that it didn't is not supported on this hardware!To me, it seems that you tried to install applications that are not compatible with this laptop.
Where did you get the drivers?On the European driver of Toshiba in archive page, you can find the drivers for Satellite Pro M30
-
Keyboard layout has changed. Symbol and the number of keys do not work properly.
my friend borrowed my computer and then I came home and tried to send someone. When I type I can't get the shift to capitalize the letters or the numeric keys to make an exclamtion, or the sign or dollar etc... can you help me.
Hello
The friend may have changed keyboard and other parameters which they should not do
without telling you. Try a system restore before that happened - reboot first to see if this
It clears.Reboot and then if necessary use this method to return to until the problem occurred.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
I hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right. -
Spider Solitaire, the ctrl z key does not work
In Spider Solitaire, the ctrl z no longer works, I have to go to the game tab and then select Cancel to undo a move, please help, running Vista
Original title: Spider Solitaire
Hello
CTRL-z works in other programs, like a word processor/text - Wordpad, Word etc. ? Do a shot and see if ctrl-z performs a "Cancel".
If other programs are affected in the same way it may be a hardware problem, you can cross test with another keyboard?
Tricky
-
updated connections 5 access and now the quick access keys do not work...
anyone else having this problem? anyone with a fix? I uninstalled the screen enlarger and reinstalled with system update, but no dice... I think that they stoped working after I upgraded to the version of dial-up connections 5, if I uninstall to reinstall Access, is - connections this going to lose my settings?
Thank you
Doug
You can try to install the drivers HotKey, should do the trick
-
that comes with the laptop activation key is not applicable to the type of windows installed
Hello. I try to activate my windows with the product key that I saw at the back of my laptop but a habit of working because it says that its not applicable to the ultimate windows that is installed on my laptop... his view are rather than I run windows 7 all upward rather than windows 7 ultimate... I don't know how to do this. Help, please. Thanks :)
Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture or
contact PC manufacturing (see support links below) and order the recovery media.Note: Activation is not required when you use the recovery partition or recovery media, but you will need to reinstall all your applications.
Also to save your documents on external support (if possible) before starting the recovery process.
Once completed, your PC will be actually in the State when you first purchased it and turned on for the 1st time.
To access the recovery Partition, start your computer, and then by pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the list below or your user manual for your brand and model.
If your hard drive has failed, do not have a recovery partition or the recovery partition is not accessible,
Then, you must contact the manufacturer support team and ask for a "recovery disc" which allows to reinstall Windows 7.How access/start the process of recovery of the manufactures listed below.
Acer: Press and hold ALT + F10, as soon as you see the logo
http://Acer.custhelp.com/app/answers/detail/A_ID/2631
Acer support: http://www.acer.com/worldwide/support/
Acer recovery support: http://store.acer.com/store/aceramer/en_US/eRecoveryAdvent: restart your computer, then the immediate start by pressing the [F8] key or the F10 key.
The fastest way to restore your computer is to use the hard disk recovery tools. You can access them by restarting your computer and then pressing the [F8] key or the F10 key until the Advanced Boot Menu appears. Use the arrows to select "Repair your computer", then press [Enter]. Read all of the instructions on the website of advent and made your choice as to the action you want to perform: http://www.adventcomputers.co.uk/restore-or-reinstall-windows-your-computer
Support: http://www.adventcomputers.co.uk/product-support/support-servicesASUS: Press or press the F9 key as soon as you see the Asus logo.
http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&m=X53E&OS=&no=1775
ASUS support: http://support.asus.com/contactus.aspx?SLanguage=enDell: Press F8 directly after switching on / to start the computer
Recovering detail instructions:
http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
Dell support: http://www.dell.com/support/home/us/en/19?c=&l=&s=
Or: http://www.dell.com/EMachines: hold the Alt key and hold press and release the key F10
http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html
Support: http://www.emachines.com/ec/en/US/content/supportFujitsu: Press F8 several times directly after switching on
https://answers.Yahoo.com/question/index?QID=20110406074143AAcx1Zw
Support: http://www.fujitsu.com/global/support/Gateway:
http://www.ehow.com/how_6297937_restore-gateway-laptop-factory-settings.html
https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml
Support: http://www.gateway.com/worldwide/support/HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
HP Mini: Press F11 directly after switching on / to start the computer
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418
Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.htmlLenovo uses the F11 key to launch the restore process:
http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4UFUYK
Directions for Lenovo OneKey Recovery, hidden partition and recovery DVDs:
https://support.Lenovo.com/us/en/documents/ht077384
and: http://support.lenovo.com/en_US/detail.page?DocID=HT077144
Support: http://support.lenovo.com/en/supportphonelistHow to run Lenovo Onekey Recovery
http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211You can also find parts of this article from Lenovo worth reading:
http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4VFUDULG: Press F11 directly after switching on / to start the computer
Support: http://www.lg.com/Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
After the system recovery program has loaded follow the instructions to reinstall the operating system.
Support: http://www.packardbell.com/index.htmlSamsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.
Support: http://www.samsung.com/Sony VAIO Windows 7: restart and press "F10".
https://CA.en.KB.Sony.com/app/answers/detail/A_ID/35585/p/48903, 49902,71663,71664/c/65,67/kw/recovery%20using%20f10
Sony VAIO Vista: Restart and press "F8" repeatedly until the screen "Advanced Boot Options".
https://us.en.kb.sony.com/app/answers/detail/a_id/41931/~/how-to-perform-a-system-recovery-using-the-vaio-recovery-center.
https://us.en.KB.Sony.com/app/answers/detail/A_ID/41949/session/L2F2LzEvdGltZS8xNDA4MjI2NTAzL3NpZC8qWVBPbCpfbA%3D%3D
Support: http://www.sony.net/SonyInfo/Support/Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
and at the same time, press the button power once to turn on your laptop.
When the Toshiba screen appears; release the 0 key.
References: http://www.mytoshiba.com.au/support/items/faq/71
http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643
Support: http://www.toshiba.co.jp/worldwide/Windows 7 - location of the Partition Recovery and information.
"Configurations of drive partitions using the BIOS has recommended.
Note: Check the diagrams of this article
http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspxJ W Stuart: http://www.pagestart.com
-
How can I configure "Numlock" as a default setting for the numeric keypad on Pavilion DV7?
Sometimes trying to enter numbers using the numeric keypad, numbers will not enter, or navigation keys are activated.
To set the numlock WE as value by default when you log in, you will need to edit the Windows registry.
HKEY_USERS\. Default\Control Panel\Keyboard
Change the InitialKeyboardIndicators value in 2
-
Portege 3500: FN key does not work
the FN key is not working and when you start get the recovery of the thotkey failed
What function of the FN key doesn't work?
If the switch show FN + F5 n t work buttons you need to install utility for display devices access keys. If the wireless shortcut key does not work, you need to install Wireless hotkey.
As you can see, different applications and drivers are required to use different Fn keys.But common modules must be installed always, because this driver is important for every application from Toshiba. Also, be sure to reinstall the utilities.
Visit the Toshiba for the necessary drivers. -
Re: Satellite C650 - some keys do not work normally
Toshiba Satellite C650 series, reinstalled Windows 7, problem with the keyboard, some keys do not work normally, some keys are intchanged... for example. the sign @ is located above the right shift key but now the types of the '2' i.e. the SHIFT key functions of these keys are reversed... the same with other keys 2-3... What is the problem? How to solve it?
Thank you & best regards
You have preinstalled Windows using original recovery image, you got with your laptop (Win7 preinstalled Toshiba)?
I ask this question because I want to know if the keyboard is compatible with the language of the OS.Have you tried to change the keyboard input language?
-
Satellite Pro U200 - FN keys do not work
Hello
I have a Toshiba Satellite Pro U200 with Windows Xp Prof
My problem is that the Fn shortcut keys do not work.
Help, please.Hello
The FN keys should work after install Toshiba common Modules.
Depending on your other threads you have not installed the common Modules on this laptop and I assume that this is the reason why don t FN keys work properly.The solution is simply.
-Go to the page of the European driver Toshiba
-Choose your laptop computer and downloaded and install the common modulesWelcome them
-
Re: FN brightness key does not work on my Satellite L350
Hello, I have a Toshiba Satellite L350 - 20 portable computer G, I went down to windows XP
Screen, sound, WIFI all work great, but the Fn brightness key does not work, anyone know the solution to my problem
Thank you
You have installed the clean version of Windows XP Home edition?
Have you installed all the drivers available, tools and utilities? -
F4 function key does not work does not in Excel 2010
I have a HP Pavilion series g - Windows 7-64 bit
The F4 function key does not work in (2010 excel 64-bit).
Any suggestions?
ch1616
Hello
It may be useful to change the setting of the fn key in the bios as described in the link below to see if this has an effect on the f4 key in Excel.
http://support.HP.com/us-en/document/c02035108
Kind regards
DP - K
Maybe you are looking for
-
How to sort or search for the source of the camera
I use the Photos for OS X. I sometimes used multiple cameras on a trip and then I want to merge them into a single stream. It would be very useful if I could sort or search on the source of the camera in the Photos. I've found that displaying informa
-
face of Mickey mouse on my watch is in black and white how to get color
I only have black and white mickey mouse on the face of my watch. How can I make color?
-
Pavilion 15b119sl: RAM Sleekbook Pavilion 15b119sl
I wish upgrades RAM of my laptop but I'm scared to break! I need a guide to open it and find out where is the RAM memory. It would be very nice to have a how-to video. Location of RAM to the Pavilion Sleekbook 15 b 119sl? How can I access? Best regar
-
programming of nodal attribute based on a condition
Hello I created a subvi, which displays a nodal configuration window function of the State (display or initialize) I don't want the front to display each time is it possible to insert a program inside the condition below ti determine during which the
-
In my list of scheduled tasks, there are 25 entries starting with AT0 and ending with AT24. They try to run c:\windows\system32\ BDX65VSD.exe an hour out there every day of the week. When I run it from the command prompt, I get a list of attempts AT