The objective data are good, but the model is gibberish...

Similar Questions

• My computer has a problem so that the dates are wrong, but he created a large number of captures instant wrong date

  Because now when I create AWR report, the dates of these snapshots are all wrong.  How can I remove those?

  You can use snapshot of packages specified with the id of component snap-in:

  BEGIN
  DBMS_WORKLOAD_REPOSITORY. DROP_SNAPSHOT_RANGE (low_snap_id-online 12, high_snap_id-online 40);
  END;

  Which will remove the clichés with ID between 12 and 40.

  K

• Cellular data are on, but does not?

  This problem has been who is rampant in me for these days. So I come home from a study of the year abroad to the Japan, and put a new SIM card in my iPhone 6 when I got home. I saw the bars, and LTE. Data cell was lit, I never turned it off. But every time I want to try to use internet or anything requiring internet, my phone there is no link, and I had to activate cellular data or connect to the Wifi. I went to Verizon, they said, they didn't know what to do. I went to Apple, and they did not either.

  The strange thing is my phone doesn't work if I restore it. If I connect to my computer, ti go iTunes and hit "Restore iPhone" and start over, the internet works. So I backed up my phone before I do, only to find out that if I restore the backup and then my internet stops working again. Now I don't bother me restore my phone. It is updated to 9.3.4, and most of my stuff comes back via iCloud in any case, I'm pretty sure. (Notes, contacts, etc.) Honestly I don't know if it's iCloud because I don't really know what's on my iCloud or how to check, either, but if I restore my phone these things all still return.) The only problem with that is, if I do I lose all my photos. I have about 10,000 photos and videos on my iPhone I need to upload them to Facebook, some I want to keep my phone without worrying. I saved in a file with Capture of Image; I couldn't use iPhoto because she kept finding problems with my photos and refusing to back them up, so it turned out to be useless. I backed up, wiped my phone and put the photos that all back, except that now they are in an album subtitled "on my Mac" and NOT in my Camera Roll. They also not be deleted, and I can't put them all on Facebook; Facebook goes back only to my last 5,000 for a reason, not completely backward through the 10,000. If they are all on my Camera Roll, however, then it will come back completely without problem.

  With respect to the data cell phones/Internet, I tried everything with Verizon and walk in Apple Store. Reset Factory Reset network settings, and restart your phone, put in another new SIM, I don't know what the * happens. I'm not even good with phones or anything Apple related so I was hoping someone here could help me.

  I just need to get 2 things: my photos and my Internet connection. It seems that I can't have one without the other lose. I'm at the end of my absolute roll, and this isn't what I want to spend my time doing when I came right home. I had no such problems at all when I was abroad, they began as soon as I put the new SIM card in, but Verizon and Apple have both claimed that the SIM card is not the problem. I really hope that someone can help me here. I'm looking for a way, if possible, to restore internet on my phone backed up, or a way to restore my film on my phone restored photos, basically. Thank you for reading!

  More than likely, it is possible that the use of the foreign SIM card installed a profile on your device. When you restore the unit to the factory, you delete the profile, but restore your backup restores the profile. Many foreign SIMs for this.

  Go to settings > general and see if there are all the profiles listed. It may also have to with a carrier day missing on the device. With the full backup, you can check in settings > general > about and see what is listed under the carrier. If it is not Verizon, then there is a problem.

• My impressions are good, but have a bluish cast

  all my prints on epson printer are goodim using rechargeable ink colors is strong but they all have this bluish tone

  Ask for help with maintenance and calibration of your Epson printer. Windows has no capacity to do so and doesn't cause your problems with impressions.

• How to save data in simple, but old, corrupted worksheet

  I can't SAVE a spreadsheet used by many people, in many applications, more than 10 years.  The data looks good, but it is corrupted. Life will not end, but the hours will be lost. Is it possible to force a copy of data to put in a clean spreadsheet?  This info has been used to bring back a group of genealogy of aging in the 21st century we can stop dragging boxes and boxes of text around one President to another.

  Many thanks for your suggestions, and as you can imagine, I could use some of the steps in the process.

  KINDERGARTEN HEALTH AND INFANT

  Hi Mary,

  More information can lead to solutions more.

  If the worksheet is opened you can try to copy the tables from the old to a new. If this does not copy the cells of an old table in a new doc.

  Quinn

• OsCustomizationSpec and OSCustomizationNicMapping they are a good way to set up the new virtual machine for the model

  I build a script to generate auto magicly VM when I have import information from a csv file. I have the latest PowerCli, I am trying to build servers r2 Sever 2012 model.  I tried several OsCustomizationSpec (OCS) of in the hope of getting something to work, but I had no luck so far.  In VCenter, it shows that it applies the OCS, but is not apear to have an impact on the server.  I have disabled UAC since the last time that I tried it so maybe that will make a difference.  I am under ESXi 5.1 update 2, just to try to give all the necessary information.  Ideally, I'd like Sysprep, the value of intellectual property, change the computer name and join the server to the domain.  That's all! lol I have the book "VMware vSphere PowerCLI Reffernece, automating vSphere Administration, I walked through step by step.  The new version of PowerCli seems not have the x 86 limitation as earlier versions of PowerCli.  I tried so many different things, I'm not sure what to put in place as a starting point.

  # Save the object credentials with permission to join the domain.
  $DomainCredentials = get-Credential "domain\testername."
  # Clone our Spec by adding the domain information.
  $Spec = get-OSCustomizationSpec "Windows Server 2012 R2"
  $Spec += get-OSCustomizationNicMapping - Spec $Spec
  #$Spec | Select *.

  # Get our VM
  # Change network settings
  Get - VM BigServername | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName nic - 172.16.25 - VLAN225 - connected: $true '
  -Confirm: $false | out-null
  # Close the comments to make change.
  Stop-VMGuest - VM $VM - confirm: $false | out-null
  # Wait while feedback stops
  While ($vm. ExtensionData.Runtime.PowerState - not "poweredOff")
  {
  Start-Sleep - seconds 1
  $vm. ExtensionData.UpdateViewData ('Runtime.PowerState')
  }
  # Apply Spec customization to apply the new network settings
  Get - VM "BigServername" |
  Set-VM - OSCustomizationSpec "R2 Windows Server 2012" - confirm: $false |
  Start-VM

  I can rebuild the model, or something else, we must do this work.

  OR - is simply not the best way to configure the VM?  If not, what Sysprep?

  Good news, but first, I would really like to know where the log files are on which server to the OsCustomization process.

  I decided to reverse engineer and create a CSOS within vCeneter and once I got to work, I kept creating new CSO via PowerCli until I could get that to work, create a new virtual machine.  Once I got this to work, I have tryied to apply on a cloned vm, with no parameters. I got it works too.  I tried to go back to my original image, but I couldn't get this to work.  Something's wrong with this picture.  He wrath that the problem was related to the permissions on the local client.

  New OSCustomizationSpec - OrgName company OSType - Windows - ChangeSid-Server "vcenter.dom.com" - name PowerCliOnly4 - persistent administrator-Type FullName - AdminPassword! password123 - zone "Eastern (USA and Canada)" AutoLogonCount - 3 - domain dom dadmin - DomainUsername - DomainPassword! password123 NamingScheme - vm-Description "PowerCli Use only" - confirm: $false

  Get-OSCustomizationNicMapping - OSCustomizationSpec PowerCliOnly4 | Game-OSCustomizationNicMapping - Position 1 - IpMode UseStaticIP - IpAddress 10.10.10.98 - 255.255.255.0 - DefaultGateway 10.10.10.1 Dns subnet - mask "10.10.10.10","10.10.10.11" "-confirm: $false

  This seems to be very picky.  Because the area is one of the parameters, you cannot put it in the DomainUsername, no dom\dadmin. The part that I really want to know how to get more, is what happens if your vm has a different local administrator as the administrator account.  It turns out that FullName - is not the account that it to connect locally with tires. When I created the vCenter Medtronic Chondroitin, I put 'me' in the name and information of the Organization and that's what was settled in the FullName property:

  Name: PowerCliOnlyM
  Type: persistent
  ServerId: /VIServer = dom\[email protected]: 443.
  Server: vcenter.dom.com
  LastUpdate: 24/09/2014 13:33:19
  DomainAdminUsername: dadmin NO dom/dadmin here!
  DomainUsername: dadmin
  Description: PowerCli use only, done manually in vCenter.
  AutoLogonCount: 3
  ChangeSid: true
  DeleteAccounts: false
  DnsServer:
  DnsSuffix:
  Domain: vsi
  Full name: me
  GuiRunOnce:
  NamingPrefix:
  NamingScheme: Vm
  OrgName: CompanyTU
  OSType: Windows
  ProductKey:
  Time zone: (USA and Canada)
  Working Group:
  LicenseMode: NotSpecified
  LicenseMaxConnections:
  EncryptionKey: {-126, 3, 48, 108...}
  ExtensionData: VMware.Vim.CustomizationSpecItem
  ID: PowerCliOnlyM
  UID: /VIServer = vsi\[email protected]: 443/OSCustomizationSpec = PowerCliOnlyM /.
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  AdminPassword: w
  DomainAdminPassword: N
  DomainPassword: N

  DNS: {10.10.10.10, 10.10.10.11}
  Wins                  :
  SpecId: PowerCliOnlyM
  Spec: PowerCliOnlyM
  SpecType: persistent
  NetworkAdapterMac:
  Position: 1
  IPMode: UseStaticIP
  IP address: 10.10.10.98
  Subnet mask: 255.255.255.0
  DefaultGateway: 10.10.10.1
  AlternateGateway:
  VCApplicationArgument:
  ID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  UID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  ExtensionData: VMware.Vim.CustomizationAdapterMapping
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  Version: 1

  I think that it is good to know that the virtual machine reboot 4 or 5 times as it goes through this process.  It breaks is you try and do something for the virtual machine that interrupt the process.  I don't know that I'll think more questions in a second.

  In addition, it cost he had some problems with the put between quotation marks, single or double around the password, but I did not check this again, I just know that once I took them, he began to work.  I ran on other issues while testing as I was using a single IP address, so if I do not disable the test VM, the following would not work because of the conflct network, maybe I shouldn't admit that... lol

• The data are stored in the DB for the Jdeveloper test, but not in the dev environment

  The data are stored in the DB for the Jdeveloper test, but not in the dev environment

  Hi all,

  IM new with OFA and Im working with Jdeveloper, I create a form to store information using a VO and EO and add information to the current line using the attribute set of function, I noticed that when I lunch the update in the jdevelopher data is OK in the comic book, but when I install the development in the DEV environment the data stored using java code does not the table, only data that are related by the object as text fields and others.

  This is the code that I use for SAP data, it works in jd, but not in the dev environment

  {} public void saveData (String responsabilidadID)
  int respId = Integer.parseInt (responsabilidadID);
  OAViewObject vo = (OAViewObject) getQuiebresComercialesVO1 ();

  vo.getCurrentRow () .setAttribute ("ResponsabilidadId", respId);

  getTransaction () .commit ();
  }

  Any there who encounter this type of problem, something I can check?

  Thank you all.

  Just check if you bounced the server after you deploy the code. Objects Java would not reflect the changes, unless the instance is bounced.

• When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  Disable the iMessage?

• Update fail, have 3 updates that load, but then the icon appears again advise that even the dates are ready for loading.

  I have Windows XP Home Edition Version 2002 Service Pack 3.  I have 3 updates that load, but then the icon appears again advise that even the dates are ready for loading.  Is it possible that updates sent me are for the 2003 Version?  Whenever I update these 3 updates, a window shows updated loading successfully, but they still remain as an icon in my taskbar?

  CrystalBall © SEZ...

  See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

• Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Techincal Suport...  (INVALID_QUERY: XMLList object)?

  After a number of years of service, my Adobe Premiere CS4 gives me the following error message:

  Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Technical Support...  (INVALID_QUERY: XMLList object).

  I use this software on an old Dell desktop computer to two year with many members and drive.  It is a stand-alone application, not connected to a server.

  Anyone have any ideas on how to solve this problem?

  I think it has to do with the central resource is no longer supported.  Everything works OK if you ignore the message?

• Hi guys, I had a problem with the monthly payment, it is written that my credit card data are no longer available, but my credit card is still valid until the 04.16 I olny a few days to fix this, is there another way to make a payment?... and h

  Hi guys, I had a problem with the monthly payment, it is written that my credit card data are no longer available, but my credit card is still valid until the 04.16 I olny a few days to fix this, is there another way to make a payment?... and how I can do?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Font size set to auto but sounds different when the data are populated compared to typed manually

  I have a form where all the size of the font of fields is set to auto. When data are filled in the form in a custom program the font size appears different to the name and first name fields. When the same names are typed manually in the form (not filled in the custom program) the font size remains uniform. There is no coding in the personalized program to manipulate the fonts or the font settings. What could be the cause of the change in the appearance of the font size. Another interesting is that after the program fills in the data, I can click in the areas affected by this problem and the police will change to what it should be but set in the right size once I have quit the field. I also see that some fields when filled will not be characters fat even if the police is set to a bold font.

  When a font of a field is set to Auto, Acrobat/Reader dynamically adjust the font size to match what is entered. When not using Acrobat/Reader to populate a field, it belongs to the program to properly set the font size based on the value of the field. Adobe does not publish any algorithm they use to determine the exact size (depending on the font used and the coordinates of field), so that a third party should use a better estimate (or not even trying at all), that looks like what is happening in your case. When you click within a field by using Acrobat/Reader, the font size is adjusted dynamically, but because the value of the field does not change, it is not defined when the field loses focus.

  A possible solution would be to use JavaScript to record all the field values, reset the form and then fill in the form using the saved values, this would cause Acrobat correctly define the appearances of field.

• The system on my mac and all recovery data are erased. I have my serial number, but how do I reinstall my adobe creative suite design &amp; web premium?

  The system on my mac and all recovery data are erased. I have my serial number, but how do I reinstall my adobe creative suite design & web premium?

  Hello

  Please visit the link below to download the version of Creative suite design and web premium:

  Other downloads

  Quickly find your serial number

  Let us know if that helps.

  Kind regards

  Bani

• I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global KMs are no

  I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global not supposed to KMs the listed here?

  Hello

  You have imported the whole CKM in modules of knowledge?

  If not, import ckm and do it.

  Kind regards

  Gangareddy.k

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/