The ODI 10 g upgrade to ODI 11 g

Similar Questions

• UPGRADE THE ODI

  I'm new on ODI and I do an upgrade to 10G and 11G, but I came through a few questions

  (1) documents say that clone the repositories of masters and working (I left this backup databases used by these repositories. Fix this how can I tell which diagram is connected to the master repository and work. If im wrong what is the exact meaning of it)

  (2) here for user ID DBA, password what should I give and what I need to create a new schema for this?

  )

  Take a look at this blog, ODI upgrade to 11 g.

  # 1 the diagram is connected to the master repository and knit - check the ODI 10 g login screen (you should obtain details of the scheme)

  # 2 no need to create a new schema - uses the schema of the cloned / backup

  Kind regards

  Deker P.

• The ODI 10 g upgrade to ODI 11 g: upgrade of the auxiliary java error

  Hi gurus,
  
  
  I am currently upgrading an installation from 10g to the 11.1.1.6 version.
  
  I cloned the deposits, then installed the autonomous agent of 11g.
  When I am trying to run the Update Wizard, I get the following error message:
  
  C:\oracle\product\11.1.1\Oracle_ODI_1\bin > ua.bat
  C:\oracle\product\11.1.1\Oracle_ODI_1\upgrade\temp\jdk_version.log
  Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version in .class file number
  at java.lang.ClassLoader.defineClass1 (Native Method)
  at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
  at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
  in java.net.URLClassLoader.access$ 100 (URLClassLoader.java:56)
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:195)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:268)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
  at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
  Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version in .class file number
  at java.lang.ClassLoader.defineClass1 (Native Method)
  at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
  at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
  in java.net.URLClassLoader.access$ 100 (URLClassLoader.java:56)
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:195)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:268)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
  at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
  
  
  Would it be because of the JDK or JRE version? Mine is 1.5.0_18_b02 of Java.
  The operating system is Windows Server 2003.
  
  
  
  Thanks in advance for your help.
  
  
  
  Concerning

  According to the ODI 11 g Certification Matrix (link given below)--> Certification tab for the ODI system

  http://www.Oracle.com/technetwork/middleware/data-integrator/ODI-11gr1certmatrix-163773.xls

  You should use Oracle JDK 1.6.0_29 or higher.

• UPGAST-00155] [update. Framework] unable to connect to the account of the ODI supervisor: SUPERVISOR.

  We get this error when running upgrade wizard at level for ODI 11.1.1.1.6.

  UPGAST-00155] [update. Framework] [tid: 11] [ecid: 0000K8ft44ECcpGLIy9Dif1IUS8Z000002, 0] unable to connect to the account of the ODI supervisor: SUPERVISOR.

  A given SUPERVISOR/SUNOPSIS for credentials in the user interface

  Is there a file where the password is cross checked and need a change. Please advice

  You can follow the steps below to update the supervisor password

  use file encode.bat available in the location of oracledi\agent\bin

  Encode

  then run the following update query.

  UPDATE SNP_USER SET PASS ='' WHERE WUSER_NAME = "CONTROLLER";

  Chantal

  http://dwteam.in

• Excerpt from the ODI Essbase MetaData

  Hi all
  I use ODI to extract my QA planning essbase cube metadata. This works fine, but for the column of data storage, it is only in draft S (or store). It's the size of accounts, that I work with, so there are several dynamic Calc members in that dimension. Anyone know why I do not see these other options out to my snippet of data storage?
  
  Version 9.3.1
  
  Thank you!
  Tommy

  Hello

  It's a bug with older versions of the ODI, I recommend upgrading to a newer version.

  7186129: LKM Hyperion Essbase METADATA SQL does not extract the Member property for the storage of the data correctly.

  Fixed in version 10.1.3.4.5

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Change the SUPERVISOR password in configuration of the ODI

  Hello

  I configured an agent in ODI 12 c with the help of a guide in the link below:

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/ODI/odi_12c/odi12c_agent/odi12c_agent.html#overview

  Now when J'execute./agent.sh-name = OracleDIAgent1-PORT = 20910 I get an error "ODI-10199: ODI Incorrect username or password" error details is given below:

  [oracle@ODIGettingStarted bin] $./agent.sh-NAME = OracleDIAgent1-PORT = 20910

  New data source 2016-02-10 06:27:51.461 NOTIFICATION: [OGG_ODI_REPO/***@jdbc:oracle:thin:@//localhost:1521/ORCL]

  2016-02-10 06:27:54.030 ODI-1128 NOTIFICATION Agent OracleDIAgent1 begins. Container: AUTONOMOUS. Agent version: 12.1.3 - 17/06/2014. Port: 20910. JMX port: 21910.

  What helps: 127.0.0.1,127.0.0.1,127.0.0.1

  2016-02-10 06:27:57.975 ERROR ODI - 1131 OracleDIAgent1 Agent encountered an error: ODI-1404: Agent OracleDIAgent1 start failure: an authentication error occurred when connecting to the master repository. Caused by: ODI-10199: ODI Incorrect username or password.

  2016-02-10 06:27:57.976 WARNING ODI-1404: Agent OracleDIAgent1 start failure: an authentication error occurred when connecting to the master repository.

  Caused by: oracle.odi.core.security.BadCredentialsException: ODI-10199: ODI Incorrect username or password.

  2016-02-10 06:27:57.978 unavailable WARNING

  2016-02-10 06:27:57.999 ODI-1443 ERROR error when starting agent: ODI-1404: Agent OracleDIAgent1 start failure: an authentication error occurred when connecting to the master repository.

  Caused by: oracle.odi.core.security.BadCredentialsException: ODI-10199: ODI Incorrect username or password.

  I want to know how I can change the password and solve this problem? Note that I did not password coded for the SUPERVISOR in the ODI server configuration step.

  WAQ28 wrote:

  Do we need to use the repository work over here password to encode and then put this password in the xml file?

  No, it should be the password of the account supervisor created when running the RCU (repository creation utility).

  You can change ODI Studio tab if necessary.

• Overtemperature "PIVOT" is missing from the ODI 12.1.2

  Hello

  I use ODI 12.1.2 under 64 bit Linux.

  In my component palette "PIVOT" is missing, so I made a request Patch 17053768 with success.

  Am I supposed to remove the ' ~ /.odi/system12.1.2.0.0 ' file according to the section after the installation of the file Readme in the patch, but I might not be able to get the path because of which I wouldn't be able to delete the "system12.1.2.0.0" resulting "PIVOT" in Linux(64bit) component file still missing.

  Help, please...

  Thank you

  Sébastien.

  Note .odi is a hidden directory

  • On Unix /Linux:

  $HOME/.odi/system11.xxx

  Then search for the hidden by the name .odi directory and delete the appropriate.

  How to restore the default layout / Initial of Windows ODI (Doc ID 1439606.1)

  Kind regards

  Deker P.

• Location of the Agent of the ODI

  I hope it's a simple question.

  I have Essbase and planning on a Unix machine.  ODI Studio is on a windows machine.  If I install the ODI Agent on the windows box, I should be able to load to the correct planning and Essbase?  Are there other necessary elements in the box of Windows ODI to connect with planning?

  Thanks in advance.

  Well are you talking about using the standalone ODI or one that comes with the FDMEE?

  FDMEE install an ODI in the machine were you install the FDMEE.

  If you install ODI agent in the Windows box, it should be able to talk to the planning & Essbase on Linux (you can also use the agent to stand alone).

  End of the day, that the ODI studio connects to the database/schema & work-repository master to run the interface.

  Make sure that apply you all necessary patches (in 11.1.2.3, it is mandatory to apply a patch ODI if planning is a target)

  Kind regards

  Deker P.

• How to configure details WorkRepository to them in the console of the ODI. ?

  Hello world

  I freshly created some interfaces in ODI studio in two repositories named: WorkRep_1 and WorkRep_test and interface test_1 in WorkRep_1 and test_2 in WorkRep_test.
  Yet after configured WorkRepositories in the Console of the ODI.

  WorkRep_1:

  Connection aliases	WORKREP_1
  URL JNDI Master	JDBC/odiMasterRepository
  Key to supervisor	SUPERVISOR
  JNDI URL to work	JDBC/odiWorkRepository

  WorkRep_test:

  Connection aliases	WORKREP_Test
  URL JNDI Master	JDBC/odiMasterRepository
  Key to supervisor	SUPERVISOR
  JNDI URL to work	JDBC/odiWorkRepository

  I am getting same interface in two repositories when opened in console with different repositories, please help me.

  Thank you

  Shakur.

  Hello

  As you can see in both cases, you specified jdbc/odiWorkRepository as URL JNDI to work while you get connected to a deposit in both cases. If the steps you must follow to create Console ODI connections for two repositories:

  1. create a new JNDI with the details of the schema of data base for WORKREP_Test, targeting for your managed server where you have deployed your odiconsole.

  2. then, you configure a connection of repository odiconsole to WORKREP_Test mentioning the JNDI newly created for your WORKREP_Test.

  Steps to create the new JNDI:

  To create a JNDI, connect to the Weblogic administration Console > go to Services (on the left panel) > Data Sources

  You will see the list of configured JNDI names already. You must add one more favorite JNDI for your schema repository work connection. You can reference existing repository work connection JNDI (odiWorkRepository) for the sample of the parameters values.

  Thank you

  Parag

• How to change the name of the ODI agent and port number

  I installed ODI standalone agent (11g) on a linux server.  We now realize that we need to change the name and port number of the agent.  Is it possible to change these or do we need to re - install odi agent?

  I know that I can change the name in the ODI, but I can't change the port number.  I would like everything to be consistent in all of our environments.  That's why we need to change the name of the agent and the port number.

  How do you start the agent? Which command you use to start?

  There are two ways, either by directly calling agent.bat and passing name agent and port don't start or you can run the sh/bat file created during installation (present in oracledi\agent\bin). The file name that is created should look like this (agent_localagent11g) where localagent11g is the name given during installation time and 'agent' is the prefix that was added by ODI.

  There is no configuration file to configure the port number and agent. Make sure that the port number and name you pass to agent.sh must match what is configured in odistudio.

  Agent.bat '-PORT = 20910 ""-NAME = localagent11g.

• Cannot start the agent of the ODI JAVA EE on Linux

  Hello

  I have installed/configured EMP 11.1.2.4 on exalogic (VM linux 5.8). When I start my services I get everything right except agent ODI; It does not start and when I try to start from console FUSION EM I get this error

  [Deployer: 149034] An exception has occurred for task [Deployer: 149026] start application oraclediagent on ErpIntegrator0. : [HTTP:101216] Servlet: 'AgentServlet' failed by preloading at startup in a Web application: "oraclediagent."

  I checked on the oracle support and they say that we must change the binding order. I changed the binding order by twisting in files located in /etc./sys-config/network-scripts. But I still get the same error.

  My questions are,

  1 - is the right way to change the binding order?

  2 - How can I see which NIC is chosen by the agent of the ODI; is there a way I can change the NIC ODI agent chooses?

  
  Concerning

  Note: Please see the bulletin first response to show my ifconfig file.

  Thanks for the help guys.

  I am able to start the ODI agent with the help of oracle support.

  Enter these lines in

  Start WLS_Admin_Console-> domain_name-> Servers-> ErpIntegrator0-> configuration-> Server-> Arguments:

  '- Doracle.odi.coherence.wka1 =server_ip - 9088 = Doracle.odi.coherence.wka1.port - Dtangosol.coherence.localhost =server_ip - Dtangosol.coherence.localport = 9088.

  without the quotes. Restart the server of the ERPI.

  

  Concerning

• How do I inject inside the ODI 11 G PL/SQL (not function procedure)

  Hello Expert,

  would be like double until OWB and ODI OWB 11 G I wich 'The user function' run PL/SQL and it remove some data in the table and the reel journal, is possible that I can do the same thing in ODI, in my case, I can't call function, or a procedure stored outside the ODI. See below the part of the PL/SQL based on user OWB.

  coil MyFile... Journal

  command prompt

  create table MyTable as

  Select a.*

  Of...

  commit;

  command prompt

  spool off;

  "exit";

  Thank you!

  You can run a PL within a procedure, you simply copy paste your PL and place in a procedure inside the ODI.

  I hope this can help you!

• the ODI version

  How to know the exact version odi, we use in my machine?

  The ODI Studio displays the General version number (11g vs 12 c). Once your in Studio ODI, help-> will display the full version number and construction of information.

• Download DataServer User/Pass/host with ODI Variable to use in the ODI tools

  Hi guys.

  
  

  I was thinking about a way to dynamically modify the ODI tool based on the parameters of a root.

  
  

  So I created a dummy DataServer with host that the IP address of the server I want to reach and define the user/pass I will use to authenticate.

  
  

  

  Then I coded a variable with odiRef.getInfo to obtain this information, but the two results return nothing because this API based on the execution of an interface works. I've not found an API to get these values from a package.

  

  Is there a way to get this base only in a logical schema, such as: odiRef.getDataServerInfo ("LS_OF_THE_DATASERVER", "DSERV_NAME") so that I can use it like this:

  

  Thanks for the help, Giampaoli.

  I've made a few changes based on the post you sent.

  Basically, I used only the tip of the game from the source as the topology I wanted settings and coded the target with this:

  Command on the target

  

  Command on the Source

  

• The export of a variable value of Jython in a Variable of the ODI

  Hello everyone,

  I use ODI for the first time and I have a few simple questions.

  I wrote a Java program 'P' to perform three operations: 'X', 'Y', 'Z '. The program returns a string with the result encoded in JSON format (and never raise an exception).

  Now I have the pot of P.

  In ODI 12 c demo I created with success a procedure with 3 tasks (1 running X, Y of 2nd, 3rd Z). I run P every time a Jython script that loads the jar with some ODI environment options and pass as arguments to the main method.

  At the moment there is executed even if X fails and the Z are executed even if fails. What I need is to check the result of the operation: If the result of X is equal to a certain channel then run Y. If the result of Y is equal to a certain String then run Z.

  That's why I created 3 different procedures, each with a single (jython) task (we run X, a Y, and a Z).

  I created a new package and put in the three procedures.

  My problem is how to connect the three procedures: I need to store the result of an operation and check it before performing the next step.

  I saw that it "Assess the Variables", but how can I store the value in a variable of Jython (string JSON) in a Global Variable ODI?

  It seems that the Options of ODI are unalterable (How to set the value of the variable of Jython Script ODI). Any suggestion?

  I can't use the ODI OS calls. Jython is not strictly necessary.

  Thanks for reading.

  Gianvito

  Oh! Now your example clearly what you want to do then it is much easier. No need to do anything special... just use Jython throughout the whole, since the variables are "persistent session." Like this:

  First proc:

  

  Second proc:

  

  The result of the execution:

  

  Is that what you want?