Trouble Y50-70 with drivers intel

Similar Questions

• help with drivers intel wifi 4965AGN causing BSOD on Windows 8 because Intel released an update & also KMODE_NOT_HANDLED BSOD

  Hello.

  Someone at - it solutions to this problem? It keeps causing an irql_not_less_or_equal BSOD associated with the file netwlv64.sys.

  I've upgraded from Vista to Windows 8 and Intel drivers are version 13.4.0.139. I contacted Intel and they tell me that they release an update for Windows 8.

  I don't want downgrade to Vista but will if there is no solution.

  I have also experienced the BSOD KMODE_NOT_HANDLED which, from what I've read is due to pilots not working is not on properly on devices. I have disabled these features because they have too no update for Windows 8, and they are only for a memory card reader that I cannot live without, but is it normal for a fix of the problem KMODE BSOD?

  Thanks for any help.

  Zeon

  Your Avast is originally netwlv64.sys.  I remove and replace it with the built-in Defender

  Older drivers who need update
  SmSerl64.sys 2008-09-26 04:45:56
  ITECIR.sys 2010-07-13 05:50:47
  netwlv64.sys 07/10/2010 08:11:47

  Avast can be a cause of BSOD.

  Please delete and replace by Microsoft Security Essentials at LEAST FOR TESTER

  http://files.avast.com/files/eng/aswclear5.exe
  http://www.Microsoft.com/security_essentials/

  How to find drivers:
  -Google search for the name of the driver
  -compare Google results with what is installed on your system to determine on what device/program, it belongs to
  -Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
  s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right program

  The most common drivers are listed on this page: driver reference

  http://www.carrona.org/dvrref.php

  http://SysNative.com/drivers/

  -Driver manufacturer links are on this page: http://www.carrona.org

• problem with drivers Intel 945 GM

  I have Dell Inspiron 6400, OS - Vista Home Basic
  Sometimes the image display disappears and reappears, only after some time and the operating system displays a video message that driver is not responding and then was restored.
  Update the driver from the Dell Web site has not changed anything, and when I tried to install the driver from the Intel website, a message says that it was the wrong driver.

  
  

• I have a Pavilion 15 t b1000 with a intel 13chipset downgrade to windows 7

  I have a Pavillion b1000 15 t with a intel 13chipset and the need for this downgrade from Windows 8 to 7 is a set of guidelines for this computer to downgrade

  WARNING *.

  HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP cannot provide the drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto', if this option is available.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  Download f6flpy-x 64.zip, extract the files/folders and place it on a USB Flash drive.

  (1) turn on the computer and immediately start typing the key "ESC".

  (2) when the MENU is displayed, press "F10".

  3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  5) press "F10" and click "YES" to "Exit Saving Changes".

  (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (8) to turn on the computer and immediately start typing the key "ESC".

  (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

  11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (12) you may need to provide Intel SATA/RAID drivers at the moment...  Insert the USB Flash drive with drivers Intel SATA\RAID previously extracted.

  (13) follow all instructions and meet the need. Enter the Windows 7 key when asked.

  Many 64-bit drivers for Windows 7 from the HP ENVY 15 t-j100 CTO Notebook PC drivers of Quad Edition page should work on your computer (DO NOT use any BIOS or FIRMWARE downloads). Please post (text only) Windows Device Manager "Hardware ID" all missing and/or unknown devices as shown in the example below, and we can direct you to the correct drivers.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Problem with the latest graphics drivers Intel 82830 M graphics Satellite 1100

  I have a 1100 Satellite with the Intel 82830 M graphics card. The latest driver is version 14.7 which I just installed - icon of graph in the right lower corner of a multicolored square changes a blue screen when you install this, and the mouseover text says "Intel(r) Extreme Graphics.

  However, since installing it, my screen freezes everytime I start a game, or if I go into display properties & change anything. A hard reboot is required. Also, the startup process takes 2 - 3 times as long since this upgrade.

  Everyone knows about this problem? Does anyone know of a solution? I've seen a few posts on other forums about this, including some say that this problem came from XP Service Pack 2. Can anyone confirm this?

  Hello

  I assume that you have installed the driver for graphics card on the Intel site and you do NOT use a graphic driver Toshiba, which has been designed especially for the use of the laptop.
  Well, Toshiba recommend that you use the drivers from Toshiba. In this case, you should try to use the recommended graphic driver that you can download from the Toshiba driver page.

• Satellite L300: Update the graphics drivers Intel Vista

  Hello, a few days before had been developed new drivers for GMA X 3100.
  I downloaded on the Intel site, but I can't install it.

  I found a driver for this card graph on the Toshiba site, but the drivers were too old (September 2008).

  Why not the Toshiba L series are updated?

  Hello

  The graphics card drivers on the Toshiba driver page are the latest Toshiba drivers that are available for this graphics card.
  Don t mix drivers Intel of origin with the drivers from Toshiba!
  There is a difference!

  Intel driver don t support the overheating protection, but make the Toshiba drivers!

  Of course, you can install Intel drivers using another method. You can install the drivers from Device Manager and could point to the place where the Intel driver was stored on the HARD drive.

  But note; This Intel driver is not certified by Toshiba and you can ONLY use it at your OWN risk.

• Fluctuating speed - drivers Intel 2200 v8?

  I had problems with my Tecra XP radio - speed fluctuates between 1 MB/s and 24 Mbps even with excellent signal. After doing some research, it seems that the problem is with the Intel card and occurs with most brands of laptop, with variable problems - mine being the least of them!

  Someone recommended to try the version 8 drivers instead - someone has them?
  No pressure on Intel Toshiba you know too ;)

  I recommend you to install the latest driver on Toshiba WLAN support page - http://aps2.toshiba-tro.de/wlan/. 9.0.4.37 version there.

• Drivers Intel blocks most of the time, and every time I try to solve this question message says: the solution to this problem can not be downloaded.

  I use OS Windows7, drivers intel blocks most of the time, and whenever I try to solve this question message says: the solution to this problem can not be downloaded. What should I do?

  Original title: problem with drivers

  Hi Pragati,

  1. What is the accurate and complete error message you get?
  2. when exactly you get this error message?
  3. don't you make changes to the computer before the show?
  4. What is the brand and model of the computer?

  This problem can occur if the drivers for this particular material is not updated.

  Method 1: I suggest you run the hardware and devices Troubleshooter and see if that helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I suggest you to update the drivers for the Intel hardware by selecting the model number from the following link:

  https://Downloadcenter.Intel.com/default.aspx

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• When do we get Y50 Windows 10 drivers?

  When do we get Y50 Windows 10 drivers?

  Nice day.

  Please remember that GA Win10 is still more than three weeks.

  I saw that it was recently reported that MS is close to certify the RTM version which should facilitate the construction and the release of the pilots more. Keep an eye on this forum and your support Y50 pages.

  Y50: http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-y-series-laptops/y50-70-noteboo...

  Y50 Touch: http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-y-series-laptops/y50-70-touch-n...

  Kind regards.

• HP Envy H8-1423: HP Envy H8-1423 with ssd Intel 730

  
  

  Thanks for your reply.

  I tried another port but without success.

  I want to load Windows on it as the main drive for general use. The real HD Seagate is slow...

  One thing I have done is to partition the disk with window and that works, so I can see it with the file Explorer. The next step is to do with the Intel data migration tool, which is not the case at the moment...

  Gilbert

• How to create Multi boot Operating System CD/DVD with drivers, application as default installation and Recovery Console alongwith with operating system encryption?

  I need an application for creating operating system in multiboot with drivers, application as default installation with the Recovery Console and operating system encryption. Help, please...

  Thanks in advance...

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• Is a Windows XP pro 32-bit is supported by the motherboard ASUS P8Z68 - V LX with an Intel i3-2000?

  Hello

  A friend will be material to an Asus P5B and E6400 Intel to an Asus ASUS P8Z68-V LX with an Intel i3-2000. The trunk will be ok? If using the same system will not work, a new install work fine with the new motherboard / processor?

  Thanks for your replies! : o).

  Hello

  What exactly is the problem that you are facing?

  Looks like ASUS P8Z68 is compatible with Windows XP; However I suggest you to contact the manufacturer of devices for compatibility.

  http://www.ASUS.com/motherboards/Intel_Socket_1155/P8Z68V_LX/#download

  http://www.Intel.com/products/processor/previousgenerationcorei3/index.htm

• After installing windows XP sp3 do not work my motherboard drivers intel

  After installing windows XP sp3 my motherboard drivers intel do not work. My mother board D845 GLAD. What could be the problim?

  Try reinstalling the drivers for your motherboard chipset, you can check this link to download the chipset driver:http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%c2%ae+845+Chipset+Family+Boards&ProductProduct=Intel%c2%ae+Desktop+Board+D845GLAD

  Also, try to download the drivers from your computer manufacturer site... Their number is 800-936-5700, and they are open Monday - Friday, 05:00-21:00 Pacific, Saturday & Sunday, 06:00 - 15:00 PST. XD

• Problems with drivers for laptop HP650

  Hello

  I have a problem with drivers for this model.
  I have installed windows 7 32 bit, then removed all the drivers from the official website of HP, but a problem with the two drivers, PCI SIMPLE COMMUNICATIONS CONTROLLER and CONTROLLER ASSISTED, now I can't connect to Internet, LAN or wireless internet.

  Is there a solution?

  

  Hello:

  This is the driver you need for the PCI SCC.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5225011&prodNameId=5225013&swEnvOID=4062&swLang=13&mode=2&taskId=135&swItem=ob-104656-1

  In order to find the right driver for the wireless card (since there may be one of several different model wireless cards in your notebook), go to Device Manager and click on the network controller needing drivers and display the material for her ID.

  If you don't know how to find the hardware ID, please read the info on the link below:

  http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device

• Vista starts is no longer with my Intel core 2 duo processor.

  I am unable to start my Vista Home premium PC using my Intel core 2 duo processor. Initially, my PC came with an Intel P4 - 641, which I've upgraded to a processor E4700 Intel core 2 duo. I had no problem with the upgrade for four years until recently where it would not start.  I get the message to repair windows. I tried to repair and restore the windows are done everything to nothing. I even bought a new hard drive and a different processor - core 2 duo Intel E6600. Only when I re inserted the P4 would normally start from the PC to the top. I tried to install the firmware for vista reliability update: KB936357 to solve problems of stability with Intel core 2 duo processor. But the installer tells me that the update is not applicable, because I am running a P4. Please help as I really want to turn the core 2 duo on my system. I already installed the latest version of the bios available for my system.

  Read the section of files of dump for more information on what these files are made up of: http://support.microsoft.com/kb/315263