The Oracle has EM package for monitoring Data guard

Similar Questions

• Where can I get help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly d

  Where Iget can help with this message? «Adobe Acrobat Reader DC could not open (my file.xls) because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).» I don't know where to go or how to solve this problem. It started to happen after I went to the office 356 and uses Windows 10.

  Hi brionp43071032,

  Please see the troubleshooting provided in this KB doc steps: fix damaged document error when opening PDF files

  Let us know if you still experience the problem.

  Kind regards

  Meenakshi

• I get this error when I try to open a file with Acrobat Reader, it is said: Adobe Reader could not open "heels 2014 001.bmp" because it is not a type of file supported or because the file has been damaged (for example: it is sent as an email to)

  I get an error msg when I try to open a file using adobe reader software.  Error States: Adobe Reader could not open ' heels 2014 001.exe bmp because it is not a supported type, file or because the file has been damaged (for example: he was sent as an attachment to e-mail and has not been decoded correctly.).

  
  

  I tried to send an email with attachments 44 and would not send the email. Ever since I tried to send this e-mail, I have been doing the error msg.

  
  

  Anyone know how I can get this to work for me again?

  
  

  Thank you, any help is greatly appreciated.

  
  

  JoJo

  The file you are trying to open is (you can see from the name) a BMP, PDF files no file. Adobe Reader can only open PDF files, just so stop trying to open it with Adobe Reader. The app, users of Windows for BMP files is painting.

• After typing password password protected document (ABSA) I get the following message: "Adobe Reader could not open 'index.html' because it is not a type of file supported or because the file has been corrupted (for example, he was sent as an email.

  After typing password password protected document (ABSA) I get the following message: "Adobe Reader could not open 'index.html' because it is not a supported file type or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded)" when I send the attachment to my husband that he can open it.  P

  Hi idwa,.

  As I mentioned this file must be opened with the correct application. You will get the best understanding of your problem on this forum link: what is required to read the files .emc of ABSA bank

  Kind regards

  Ajlan Huda

• When I tried to open the bought one of the files with Adobe Reader purchase ebook, he said Adobe Reader could not open ' URLlink (2) .acsm ' because it is not a type of file supported or because the file has been corrupted (for example, it was sent

  When I tried to open the bought one of the files with Adobe Reader purchase ebook, he said

  Adobe Reader could not open ' URLlink (2) .acsm ' because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).

  Adobe Reader can open PDF files; for the .acsm file, you need Adobe Digital Editions.

• Mac does not open some files MasterPlan.pdf' because it is not a supported type, file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).

  I had this problem of not being able to open some files in a couple of years ago and was finally able to fix it but I don't remember how. Any help would be grateful.

  The following should help: error: Adobe Reader could not open ' * .pdf "because it is not a supported file type or because the file has been damaged (for example, it was sent as an e-mail attachment and was not properly decoded.) "

  Please update this thread if your problem is solved.

  Thank you

  Shashi

• How can I increase the space put into service for a data store in vSphere

  Using vSphere client 4.0.0 (208111) and vCenter Server 4.0.0 (162856)

  I have a 850 GB data store set up that shows only 525 GB configured.  My users are bumping into the ceiling and I need to give them more space.  I can't find a setting that allows me to do this.  What are my options here?

  Thank you

  How many Virtual Machines on your ESXi host? What is the size of the virtual disk to a virtual machine that has the problem? You can change the size of the disk in editing parameters for the virtual machine with problems?

• Photoshop opens not because of the "licensing has stopped working for this product."

  I bought Photoshop CS3 years there, like a box, not a download (probably about 6 years).  He had worked like a charm, but the other day it does not open and gives me a message that "licensing has stopped working for this product. Anyone has any ideas on how to get this working again?

  Please refer to: error: "License has stopped working". Windows

  Error "Licensing has stopped working". Mac OS

  Concerning

  Stéphane

• The Oracle database is free for individuals?

  Is the Oracle database free for private developers, just test the database, or what I personally contact them in order to pay them? Only, I went to the page of download of Oracle and downloaded 2 pcs. Installation of 1 GB, installed files database on my Windows 7 computer and then started using it.

  Have you paid attention to the license agreement you agreed before downloading software? Restrictions on use are clearly stated.

  Oracle Technology Network Developer for Oracle Database 11g Express Edition license terms

  The limits for 11g XE are also documented-

  Oracle & reg; Database Express Edition

  Oracle & reg; Database Express Edition

  HTH
  Srini

• Display Null when the column has a value of specific date

  Experts,
  
  I write the query in the Date column, below
  
  CASE WHEN Table.Column ='Bad has '
  THEN cast (Null as "Table". "Date") "
  WHEN Table.Column = 'Bad b'
  THEN cast (Null as "Table". "Date") "
  ANOTHER 'table '. «END date «»
  
  "but I'm * ' Format invalid Alias: Table_name. Column_name required. "
  
  Please let me know where I have error.
  
  Thanks in advance.
  
  Thank you
  Oldia...

  Hello

  Use the below a

  CASE WHEN Table.Column ='Bad has '
  THEN CAST (Null as DATE)
  WHEN Table.Column = 'Bad b'
  THEN CAST (Null as DATE)
  ELSE table.date END

  Thank you
  Saichand.v

• Please help with the oracle text and select for each word in the sentence

  Hello
  
  I have a problem with a query which NEEDS to be done in SQL (not pl/sql in the stored procedure):
  
  Suppose that a phrase such as "Church of snowboarding."
  
  Can I divide this by using:
  Select regexp_substr ('church snowboard', ' [^] +', 1, level) word
  of the double
  connect regexp_substr ('church snowboard', ' [^] +', 1, level) is not NULL)
  
  now I have words 'showboard' and 'Church '.
  
  So far so good.
  
  Now I need for each of these words, to create a list of unique IDS collected using text oracle contains the query as follows: (pseudocode)
  for SPLIT.word in "snowboarding", "Church".
  SELECT SCORE (1) NIVEAU_RECHERCHE,
  NO_MATRC,
  NO_NOM_
  OF GR_OT_NOM_ASSJT
  WHERE CONTAINS (name, SPLIT.word, 1) > 0
  UNION
  SELECT SCORE (1) NIVEAU_RECHERCHE,
  NO_MATRC,
  NO_NOM_
  OF GR_OT_NOM_ASSJT
  WHERE CONTAINS (name, ' SYN('||)) SPLIT.word: ', GR_THESAURUS)', 1) > 0
  UNION
  SELECT 100 AS NIVEAU_RECHERCHE,
  NO_MATRC,
  NO_NOM_
  OF GR_OT_NOM_ASSJT
  WHERE NAME LIKE '% "| SPLIT.word | '%'
  
  so of course I have to untangle this UNION to remove duplicates
  
  Anyone here sees a way out of my situation? A way to make the loop in a select (use with and such) then
  Just add a select distinct NO_MATRC, NO_NOM_ from)
  
  I tried, but I'm out of ideas so I thought that some guru here might have the answer ;)
  
  Thanks in advance for any advice
  
  See you soon

  You might end up with something like the XML below, ideally as binding in the query.

  SELECT SCORE (1) NIVEAU_RECHERCHE,
  NO_MATRC,
  NO_NOM_
  OF GR_OT_NOM_ASSJT
  WHERE CONTAINS (name, e
  Church of snowboard
  
  transform ((JETONS, "{", "}", "AND"))
  transform ((JETONS, "{", "}", "OR"))
  turn ((JETONS, «SYN (",", GR_THESAURUS) ', 'AND'))
  turn ((JETONS, «SYN (",", GR_THESAURUS) ', 'GOLD'))
  transform ((JETONS, «?)) {","} "," AND"))/seq >
  transform ((JETONS, «?)) {","} "," GOLD"))/seq >
  
  
  
  (1) > 0

• Grid d? infrastructure is needed for Active Data Guard fast failover?

  Hello

  I'm currently deploying an Active Data Guard of 11 GR 2 configuration with a captain and two slaves physical standby and failover accelerated for a Java JDBC application. Each instance has a read-only service that is always active and a service of reading / writing that is activated only on the master:

  srvctl add service -d smsgsig1 -s smsgro -l PRIMARY,PHYSICAL_STANDBY -e NONE -m NONE
  srvctl add service -d smsgsig1 -s smsgrw -l PRIMARY -e SELECT -m BASIC -w 10 -z 150
  

  Initially, I had planned to use the Service of Notification of Oracle (ONS) to notify the application in case of change of master, that works, however, after a few tests, it seems that simply leave the retry request enough times in the case of a connection failure is sufficient to re-connect to the new master afterwards, in order to complete any pending transaction.

  So my question is: since I plan not to use ADD-ONS, do I have the grid infrastructure and Oracle Restart at all to deploy Active Data Guard? The documentation does not explicitly require it, and all the necessary tools, including srvctl, exist in the plain 11 GR 2 home. However the mechanism of activation/deactivation of the service will work without restart? To be honest, I don't think it would be, but that this would simplify the deployment, a little, I thought it would be good to ask :-)

  Thank you for your understanding,

  Chris

  Hello;

  The simple answer is no, I could consider changing my order srvctl.

  EI SESSION (type switching must be set to both)

  m BASIC (set on both)

  l PHYSICAL_STANDBY (isn't one of yours in this service role?)
  z - 15 (150 retrys seems too high)

  q (the value TRUE or FALSE)

  w (set on both)

  srvctl add service d smsgsig1 s smsgro-l PRIMARY - SESSION - q TRUE m BASE w 10 EZ 15

  srvctl add service d smsgsig1 s smsgrw-l PHYSICAL_STANDBY - q REAL - m BASE w 10 EZ 15 SESSION

  Best regards

  mseberg

• Failover monitoring - Data Guard Broker

  Hello
  
  I'm working on a database of Oracle 10.2.0.4 on Solaris 10. This is a database of CARS 2 physical node that is configured in the standby mode.
  
  I want to monitor (send an e-mail) to myself failover (which will be triggered by the Data Guard Broker), so I think I can control failover using alert log (that normally connects the command when initiate us a failover) but I'm not sure if DataGuard Broker also did the same thing (written out the appropriate orders when a failover is triggered)
  
  Is there another way, we happen to know that a failover occurs (we can interrogate v database_role $ dataguard State) but I'm looking for some trigger that will be triggered instantly when a failover is initiated?
  
  It is also possible to monitor the observer, either upward or not?

  Hello
  you have several possibilities to do so. Easier is to use the control grid preset for her events. Or you can put a trigger on the event "after DB_ROLE_CHANGE on the database.

  The observer monitoring can be done with dgmgrl as

  connect sys/@;
  show configuration verbose;
  

  Showing you the presence and location of the observer.

  I'll give an example for the use of the trigger that starts a service according to the role of the database. You can customize to send you an email.

  begin
    dbms_service.create_service('safe','safe');
  end;
  /
  
  create trigger rollenwechsel after DB_ROLE_CHANGE on database
  declare
    vrole varchar(30);
  begin
    select database_role into vrole from v$database;
    if vrole = 'PRIMARY' then
      DBMS_SERVICE.START_SERVICE('safe');
    else
      DBMS_SERVICE.STOP_SERVICE('safe');
    end if;
  end;
  /
  

• TAF TNS entry for active data guard

  Hello world

  Need your advice on the configuration of the TNS entrance side transparent client failover of the DB in waiting in a Data Guard configuration active?

  Normally, I create a service manually and configure this service to start or stop according to the change of role of database. Then have personalities of the two sites in the entry of TNS (example below).

  TEST =

  (DESCRIPTION =

  (FAILOVER = ON)

  (ENABLE = BROKEN)

  (LOAD_BALANCE = TRUE)

  (ADDRESS = (PROTOCOL = TCP) (HOST = VIP1-SITE1)(PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = VIP2-SITE1)(PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = VIP1-SITE2)(PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = VIP2-SITE2)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = TEST)

  (FAILOVER_MODE =

  (TYPE = SELECT)

  (METHOD = BASIC)

  (RETRIES = 20)

  (TIME = 2)

  )

  )

  )

  I learned this method of-> http://uhesse.com/2009/08/19/connect-time-failover-transparent-application-failover-for-data-guard/

  Is there a better way to do this? Can we achieve this using an AMT only?

  I think I found the answer. According to the document oracle practices best client failover, the service can be configured to start automatically on the standby server when the role of the db is changed. This can be achieved by creating a service with srvctl with option '-l PRIMARY' on both sites

  For example:

  Main cluster: srvctl add service d Austin s oltpworkload r - ssa1 ssa2 ssa3, ssa4-l primary SCHOOL - q TRUE EI SESSION m BASE w 10 - z 150

  Cluster of relief: srvctl add service d Houston s oltpworkload - r BSR1, ssb2, ssb3, ssb4 - l PRIMARY - q PURE EI SESSION m BASE w 10 - z 150

  Documentary link--> http://www.oracle.com/au/products/database/maa-wp-11gr2-client-failover-173305.pdf

  Also the entrance to the AMT must be created with two descriptions, one for primary and one for standby

  TNS_DG =

  (DESCRIPTION_LIST =

  (LOAD_BALANCE = OFF)

  (FAILOVER = ON)

  (ENABLE = BROKEN)

  (DESCRIPTION =

  (ADDRESS_LIST =

  (LOAD_BALANCE = ON)

  (ADDRESS = (PROTOCOL = TCP) (HOST = vip1-primarydb)(PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = vip2-primarydb)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl)

  (FAILOVER_MODE =

  (TYPE = SELECT)

  (METHOD = BASIC)

  (RETRIES = 20)

  (TIME = 2)

  )

  )

  )

  (DESCRIPTION =

  (ADDRESS_LIST =

  (LOAD_BALANCE = ON)

  (ADDRESS = (PROTOCOL = TCP) (HOST = vip1-standbydb)(PORT = 1521))

  (ADDRESS = (PROTOCOL = TCP) (HOST = vip2-standbydb)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl)

  (FAILOVER_MODE =

  (TYPE = SELECT)

  (METHOD = BASIC)

  (RETRIES = 20)

  (TIME = 2)

  )

  )

  )

  )

• Additional logging with Oracle 10 g 2 streams and Data Guard

  Hello
  
  I have a physical environment with DB Oracle 10 g 2 and Standby with Data Guard DR CONF. At the present time, this environment will be extended to a pattern of replication using 2-way Oracle Streams Replication (for replication to the central office of this branch, other channels will be added soon). The primary DB is replicated to the other primary DB (at the telephone exchange remotely).
  
  So, there's my question: it is completely necessary to specify an additional record on data sources (primary) to set the 2-way Streams replication? and, if it is completely necessary, then, can configure additional connection on primary without affecting their physical Standby, or what I have to do something special?
  
  Thanks in advance.

  Yes, for the streams you need additional registration. There is no impact on databases physical standby.