The order of the enumeration returned by NISysCfgFindHardware()?

Similar Questions

• CFFILE READ xml file removes the carriage returns

  When I use CFFILE to READ a XML file (in order to get to the XMLPARSE step), it deletes all the outside between the carriage returns.

  My simple order of action CFFILE = 'read' file variable = "" #tempFile # "="XMLData"results, of course, in the XMLDATA variable." When I've got CFOUTPUT this value, all the transport returns have disappeared.

  In the original raw XML file, there is a section as such:

  < inspection_comment comment_type = '0' > missing tag.

  Channelled to the rear. d < / inspection_comment >

  In other words, there are in fact two combinations of chr (13) chr (10).  Yet, after the CFFILE READING, I find myself with

  Missing tag. Channelled to the rear. (d)

  and no carriage returns whatsoever.   It is a natural phenomenon, because it is an XML file, or I just don't hold my tongue right?

  Thank you!  RLS
  

  Carriage returns are not visible in html. Make sure that you use

  balises ou quelque chose de similaire.
  

• I would like to summarize the values returned by a formula similar to the 'search', but for ranges or entire columns

  Thus,.

  I have three values in column K - 'A', 'B', 'C '. Column I is numeric values.

  I am trying to create a formula that selects all rows in the K column with a specfic value (in this case 'A' 'B' or 'C'), then grab the corresponding value (on the same line) of column I, then add up all the results for a total.

  IF rows in column K returns 'A', THEN take the VALUE of corresponding column I, and THEN SUM all the values returned.

  Or something like that.

  You can try something like this:

  

  The formula in B2, filled to the bottom, is:

  SUMIF (table 1::K, A2, table 1::L)

  SG

• How to move the search return bar to the previous version?

  Using the latest update of Firefox gave me a new search bar, one where I can't change quickly, search engines to the contrary having to go into a menu to do so. This is detrimental for me since I use each search engine search suggestions, I installed. I can't do that. How to move the search return bar to the previous version?

  I found a solution. If you go in Subject: config, then find the browser.search.showOneOffButtons boolean and rocking that it restores the old functionality. (You may have to restart your browser)

  Note that, as always, to edit your subject: config at your own risk.

  credit: askvg.com

• When I start Firefox, I always "Welcome to Firefos" tab. I tried to change the options for mu, but when I close Firefox, the options return to the origional options before them, I changed. How to fix the problems of St?

  When I start Firefox, I always "Welcome to Firefos" tab. I tried to change the options for mu, but when I close Firefox, the options return to the origional options before them, I changed.

  Looks like your current profile does not work correctly.

  Create a new profile as a test to see if your profile is the source of the problems.
  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• An internal tool or the library returned an error.

  I had a very slight modification of a source today and update the source file.  When I tried to build the distribution, however, failed to build with the following messages: "Error Part developer configuration options", then "an internal tool or the library returned an error."  No other information was provided as to the source of possible error.  It is a project that has been maintained for several years.  I tried to build in 2015 of the BCI and in 2013 with the same results.  I was able to build another project without error.

  I've attached a screenshot of the error window.  I was able to build the distribution after you have created a new file .cds.  The other file must be corrupted in some unknown way.

• Camera IP IMAQdx: Error 0xBFF69035 that the camera returned an unknown HTTP error

  Hello

  Thanks to the detailed advice to http://forums.ni.com/t5/Machine-Vision/Do-IMAQdx-and-NI-hardware-support-GigE-Vision-2-0/m-p/3164373... we decided to move from GigE cameras (Basler BIP2-1920-30 c) IP cameras to reduce CPU load.

  Unfortunately, I cannot acquire images from the camera via IMAQdx. When I click on "Snap" NI Max, I get "error 0xBFF69035 the camera returned an unknown HTTP error. This could be the cause? (The only other thread, that I found is http://forums.ni.com/t5/LabVIEW/camera-return-to-unknown-HTTP-error-in-Ni-Max-during-the-IP-axis/td-... but the steps proposed refers to GigE documentation that is not relevant)

  Notes:

  • The camera is connected directly on the LAN 2 port in the SMU (SMU-8135) controller.
  
  
  • I can ping the camera.
  
  
  • I can see the video stream from the camera via its web interface (using Internet Explorer to access http://169.254.75.137/webapp ).
  
  
  • OR MAX detects the camera, but he doesn't seem to let me set up properly. If I enter any number in the 'width' or 'Height', she gets has forced 1 - this behavior seems fishy.

  

  Thanks in advance!

  Hi BlueCheese,

  Thanks for your suggestions. It turns out that the IP settings are fine (although I still like to set static IP addresses for the camera and the PXI controller before you deploy the system).

  I found the system log unit of the Basler, who gets a new entry whenever I try to start an acquisition of NI MAX: user.err mjpeg: {2714} HTTP error 503: selected stream has wrong type of video (1! = 5). Then I discovered that (i) the camera default H.264 and (ii) IMAQdx only supports MJPEG, H.264 not.

  Setting the unit to use JPEG compression solves the problem.

• Not able to use the Handle returned by open with LockFileEx

  Hello

  I try to use the file returned by open handle to lock the file using the Windows SDK LockFileEx function. It gives me an error like invalid handler. PL suggest me the solution.

  Kind regards

  You use a SDK function to open the file? The ANSI fopen() function handle or CVI OpenFile() functions won't work - you need to handle SDK function.

  JR

• What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  Hi DaddyJeff,

  1. don't you make changes before the show?
  2. are you referring to the cursor in the area of user password on the login screen of Windows?
  3. when the cursor goes missing, the mouse pointer works on screen?

  It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
  a. sign in to Windows.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of objects, expand mice and other pointing devices.
  d. right click on the sub element and click on uninstall.
  e. unplug the mouse and plug it back.
  f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
  g. check if the mouse is detected, if so, then install it.

  See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP

  
  Note: if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous state

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the same return of the browser at the request

  Hi, I'm using

  BrowserSession.showBrowser)

  to access a browser of my application (I wanted to integrate the browser in my app, but since I am compiling for pre 5.0 devices, I can't use the new browser.field2, but only the browser.field not so very awesome API).

  It is - I want to make something once the user returns to the application from the browser. Is it possible to somehow get this event? (Once the user presses the back key, it returns to my request from the browser).

  I want to differentiate this event of any other event of first plan-background.

  Thank you

  Dan

  Here's a way to do it:

  1. In your subclass UiApplication, declare an executable field (let's call it "pending").
  2. Just before calling BrowserSession.showBrowser (), the value until an executable you want to run on back.
  3. Back in your subclass UiApplication, override the activate():

     public void activate() {    if (pending != null) {        invokeLater(pending);        pending = null;    }}
     

     With the help of invokeLater is not really necessary because activate() is called on the event thread. However, I would suggest using it when even just to be sure that the executable is run after all the other events that may be pending.

• How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

  How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

  I use JDeveloper 12.1.2.0.0

  < af:button id = "tt_b2".

  rendered = "#{attrs.nextRendered} '"

  partialSubmit = 'true '.

  action = "#{attrs.backingBean.nextAction} '"

  Text = "next".

  Disabled = "#{attrs.nextDisabled}" / >

  private static final String NEXT_NAVIGATION_ACTION = "controllerContext.currentViewPort.taskFlowContext.trainModel.getNext";

  public String nextAction() {}

  If (validate()) {}

  updateModel();

  Return NEXT_NAVIGATION_ACTION;

  }

  Returns a null value.

  }

  Use case is made for model train, which is being implemented based on this blog: http://javacollectibles.blogspot.co.UK/2014/10/ADF-train-template.html

  We define a generic action following in the model, but the action must be called under certain conditions, based on the question of whether all validation controls had been passed on no.

  You can do this in two ways:

  1 returnValue = (String) ADFUtils.invokeEL("#{controllerContext.currentViewPort.taskFlowContext.trainModel.getNext}");

  return returnValue;

  2.

  public String getNextTrainStop() {}

  String nextStopAction = null;

  ControllerContext controllerContext = ControllerContext.getInstance ();

  ViewPortContext currentViewPortCtx = controllerContext.getCurrentViewPort ();

  TaskFlowContext taskFlowCtx = currentViewPortCtx.getTaskFlowContext ();

  TaskFlowTrainModel taskFlowTrainModel = taskFlowCtx.getTaskFlowTrainModel ();

  TaskFlowTrainStopModel currentStop = taskFlowTrainModel.getCurrentStop ();

  Terminus of TaskFlowTrainStopModel = taskFlowTrainModel.getNextStop (currentStop);

  nextStopAction = nextStop.getOutcome ();

  _logger.fine ("train, next stop:"+ nextStopAction ");

  Return nextStopAction;

  }

• Add a string when the query returns all records

  DB version: 11.2

  create table t (empname varchar2 (25), salary number, varchar2 (20) months, number of over_time);

  insert into values t ('JOHN', 2000, "NOVEMBER2014", 0);

  insert into values t ('KATE', 2000, "NOVEMBER2014", 300);

  insert into values t ('HANS', 5000, "NOVEMBER2014", 100);

  insert into values t ("KRISHNA", 2500, "NOVEMBER2014", 0);

  insert into values t ("SIEW", 3000, "NOVEMBER2014", 0);

  commit;

  SQL > select * from t;

  EMPNAME MONTHS SALARY OVER_TIME

  ------------------------- ---------- -------------------- ----------

  JOHN 2000 NOVEMBER2014 0

  KATE 2000 NOVEMBER2014 300

  HANS 5000 NOVEMBER2014 100

  KRISHNA 2500 NOVEMBER2014 0

  SIEW 3000 NOVEMBER2014 0

  SQL > select * from t where MONTH = 'NOVEMBER2014' and OVER_TIME! = 0 ;

  EMPNAME MONTHS SALARY OVER_TIME

  ------------------------- ---------- -------------------- ----------

  KATE 2000 NOVEMBER2014 300

  HANS 5000 NOVEMBER2014 100

  What I need is:

  If the query above returns at least one record, it should display the line ' Yes. We have one or more employees who worked overtime in November2014'

  before the documents are printed

  Thus, the expected production is

  Yes. We have one or more employees who worked overtime at the November2014

  EMPNAME MONTHS SALARY OVER_TIME

  ------------------------- ---------- -------------------- ----------

  KATE 2000 NOVEMBER2014 300

  HANS 5000 NOVEMBER2014 100

  If the query returns no records then usual 'no rows selected' isn't enough

  Lothar G.f. says:

  In fact, sql * more is no good tool for use considered.

  Really?  It may be a good reporting tool if you learn to use it as such...

  for example

  SQL > ttitle left 'Yes. We have one or more employees who worked overtime in November2014.
  SQL > select * from emp where empno = 1234;

  no selected line

  SQL > select * from emp where empno = 7788;

  Yes. We have one or more employees who worked overtime at the November2014
  EMPNO, ENAME, JOB HIREDATE DEPTNO COMM SAL MGR
  ---------- ---------- --------- ---------- -------------------- ---------- ---------- ----------
  7788, SCOTT, ANALYST, 7566 19 APRIL 1987 00:00:00 3000 20

  This is just a basic example.  It is possible to get SQL * more to ask for the required criteria and that the title could adjust according to this criterion, as well as the query building on it also.

  However, the OP did not specify SQL * as the reporting tool, so there is little interest providing a complete solution which, until they specify what user interface that they are actually using.

• conversion of date to the chariot returns 9999 as year

  Hello

  My version of SQL Developer is

  Oracle IDE

  3.2.20.09.87

  I have a table T that has a collar of the column Date

  I'm on fire:

  select col from T;
  

  I get the value returned as: 31 December 99

  When I'm on fire:

  select to_char(col,'YYYY/DD/MM') from T;
  

  I get the value returned in the: 31/12/9999

  However, when I have the fire:

  select to_char(to_date('31-DEC-99','DD-MON-YY'),'YYYY/DD/MM') from dual;
  

  I get the value returned in the: 12/31/2099

  What could be the cause of two different values returned when selecting DOUBLE and T?

  ORA - aff wrote:

  Thanks yoyo, what I get is:

  Typ = Len 12 = 7: 199,199,12,31,1,1,1

  I would expect Typ = 13 for a column.

  CREATE TABLE test_dump (d DATE);

  INSERT INTO test_dump VALUES (DATE ' 9999-12-31');

  INSERT INTO test_dump VALUES (DATE ' 1999-12-31');

  INSERT INTO test_dump VALUES (DATE ' 2099-12-31');

  SELECT d, DUMP (d) test_dump;

  D DUMP (D)

  ---------- ---------------------------------

  31.12.9999 Typ = Len 12 = 7: 199,199,12,31,1,1,1

  31.12.1999 Typ = Len 12 = 7: 119,199,12,31,1,1,1

  31.12.2099 Typ = Len 12 = 7: 120,199,12,31,1,1,1

  If your date is really the year 9999

• I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software c

  I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software check failed." The product you want to install is not genuine software remains, and seems to be counterfeit. Please report a piracy or contact customer support for assistance. This is the drive I bought from Adobe and running on my old laptop. I have the right product and serial numbers, which allowed me to install several other components of the software.

  Warning: "Adobe software real failure of Validation...". » | Windows

• If I drag and drop an object in a box. When the timeline returns like that, I want the object to remain in the area and restores not where it was originally.

  Hi all, this is my first post here. Very happy to be here.

  I created an interaction by which objects can be dragged and got stuck in a box. Never, I solved the problem when the playhead returned items I looked where I had left. I did it with as2 and never solved the problem which I am sure is easy enough to solve. I remember someone saying something about levels.

  I need to create an interaction where objects are put in a box and they stay there until the interaction ends. Say that the objects are in a room where the user must visit several times in the interaction. There must be a certain number of objects in the room and drag them into a box to get a done message, I want the user to be able to move to another part of my interaction and come back and be able to complete the conclusion and place the objects in the box without reset everything to where they were first encountered user them.

  I have wi

  All advice, tips are greatly appreciated.

  Looks like you need to add programming that 1) stores the x / y locations of the objects since they change 2) uses this information in position to position objects whenever you enter the picture that they are in.

  You should be able to create variables to store the information that is on a layer that extends from the complete timeline so that the data is stored as it is updated and you move along the timeline.  When you move the object update you its position data. Then, in the context where you have objects use you a simple coding to place objects using this position info... something as simple as...

  Object1.x = object1X;

  Object1.y = object1Y;

  If you are still using AS1/2 you would use _x and FLF instead of x and y