THE PC SE BEGINS SOLA

Similar Questions

• I have an iMac, the 27 "Office 2013.  Whenever I turn it on now the cooling fan begins to operate.  How can I stop this?

  I have an iMac, the 27 "Office 2013.  Whenever I turn it on now the cooling fan begins to operate.  How can I stop this?

  You must first check for any failure of equipment. Please use this section of Apple:

  Apple Diagnostics using - Apple Support

  to run the Diagnostics from Apple on your computer and reprot back here if there is no result.

  You can also do an SMC reset seeing weird fan behavior:

  Reset the management system (SCM) controller on your Mac - Apple Support

• Could you please tell me the name of the program that plays the files (mp3) begins with V and resembles a cone orange and white?

  Could you please tell me the name of the program that plays the files (mp3) begins with V and resembles a cone orange & white?

  VLC.

  http://www.videolan.org/VLC/

• I have a Sony Vaio computer and the hard drive begins to crash.

  Original title: Vaio computer

  I have a Sony Vaio computer and the hard drive begins to crash. Microsoft now sells Vaio? Where can I buy?

  Here are the computers that Microsoft sells: http://www.microsoftstore.com/store/msusa/en_US/cat/All-PCs-tablets/categoryID.69404700?icid=en_US_Store_UH_devices_Pctab

• I am trying to re-download Lightroom and when I hit the download button begin who appear in my email and enter the order number and the password, it says no order found. Help please... Urgent

  I am trying to re-download Lightroom and when I hit the download button begin who appear in my email and enter the order number and the password, it says no order found. Help please... Urgent

  Chances are th eemail link is a download option once.  After that, you probably need to go to your Adobe account online and look for an option to download it.

  Depending on the version it is, you might be able to find a download link through one of the following links...

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Why Photoshop keep opening in the workspace of beginning and not Essentials workspace since the last update?

  Why Photoshop keep opening in the workspace of beginning and not Essentials workspace since the last update?

  Hi GMinert,

  Beginning workspace is a new feature that was added in the release of CC2015.1 However, you can disable it by going to the Photoshop preferences > General > uncheck 'display space to start work '.

• Could not find any number on the box that begins with 1057, none of the other work numbers as a "serial number".

  Could not find any number on the box that begins with 1057, none of the other work numbers as a "serial number".

  Serial numbers are normally only applies to the case of the disc.  If you do not find the case of disk while you might be dealing with a scenario of redemption code... depends on where you bought the software and what is the software.

  Quickly find your serial number

  Using redemption code

• When the warranty coverage begins for the purchase of the online store?

  I bought my Macbook Pro online at the end of April 2015

  It was shipped may 6 and I received it on May 17.

  Cannot find anywhere, if the guarantee begins

  When

  you receive

  or

  order you

  or

  When Apple ships the product because the credit card was charged on this day

  If you ask to know when to buy the AppleCare extension, just buy AppleCare now. Even if we tell you the exact day guarantee began, you may need to buy AppleCare on the eve of the 1st birthday instead of the actual birthday because of the way that they time.

  Otherwise, please call 1-800-APL-CARE for the official response.

• How OSX decides where on the disc to begin to write

  Location:

  NTFS formatted disk is connected to the Max OSX - "erased" HFS format.

  This stage just implements the structures on the disk.

  1 TB of data NTFS - disc is 4 TB.

  Question:

  How to decide where on the disc to start writing about OSX?

  is the HFS "erase" (formatting) declare where beginning of file system is? ".

  how he decides where this start must be?

  is it important that he sees data NTFS (although the orphans) and there are a LOT of free space - he would use free space?

  Thank you

  You cannot format a partition with two file systems - one per partition, use the data NTFS and Mac as well on the same disk, you need to create two partitions on the disk. One will be formatted to NTFS and the other will be formatted HFS + Journaled. You live when a file is saved. OS X does not have to decide whether a file is NTFS or Mac.

  In regards to the Mac OS X can only read NTFS. He cannot write it without the help of a third-party software.

• Install Windows 8 on external drive Thunderbolt - Windows could not prepare the computer to begin the next phase of installation

  Hi all

  I'm at my wit's end trying to install windows 8. Let me start at the beginning: I used to have windows running on my Mac Pro ssd internal 8.1, installed via bootcamp. It worked well for a while, and then refused to start, gives me a blue screen KERNEL_SECURITY_CHECK_FAILURE. Despite some advice from lonely T, I was unable to fix and ended up wiping the partition and relocation, again via bootcamp. Yet once again, it worked for a few months, then the same problem. I made this one last time, and it only lasted 2 days... So I gave bootcamp.

  I think that the hybrid MBR partition scheme that implements bootcamp is the culprit, but I don't really have evidence to substantiate this claim. In any case, I tried to install windows in EFI mode. (If I understand correctly, the hybrid MBR is set up to allow windows to install in legacy BIOS mode, but that windows 8 may now install efi, which supports my Mac Pro mode.) My Mac is the new Mac Pro (end of 2013, trash in shape), and I can say short UEFI 2.0 (I have the latest efi update from apple installed).

  The method I'm trying:

  1. create a new partition in HFS + on my external drive using disk utility. The drive has now it's efi partition and partition empty 750Go I want to install windows a 1.25 TB storage partition that I use with my mac. It has a GPT. I formatted HFS + and no FAT, because I think that disk utility creates the same hybrid-MBR as training camp every time a FAT partition is created.

  2. use gdisk to confirm that the disc does not have a hybrid-MBR. (sudo/dev/disk1 gdisk watch MBR: protection)

  3 restart my mac and hold the possibility to put in place to bring up the boot efi menu.

  4. Select the EFI_Boot DVD icon (that's the windows 8 install dvd that I have in my superdrive USB drive)

  5. go in the menus of the disk selection screen installation and delete the partition in HFS +, I created to install windows on (the format option is not available)

  6. now select "Unallocated space" on the good drive and click Next.

  The problem:

  Partitioning seems to go ok (there is no feedback on this basis, but it proceeds to the next screen, and all new partitions expected are there if I check diskutil list later). He said it is "copy of windows files", but then stops with the error "Windows has no prepare the computer to start the next phase of the installation." To install Windows, restart the installation. "If I restart, I can start the same process all over again and get the same result.

  The Question:

  How I get this error and get windows install?

  Extra pieces:

  • The first time it happened I assumed it was the new sip / thing "without roots" in El Capitan, causing problems, then I disabled, but I still get the same error.
  • After reviewing the diskutil list output after one of installs it without success, I found that a labeled EFI partition has been created after my storage partition (the original efi partition was still there in the upper part of the disc).
  • I have windows 8.1 installed now bootcamp on my internal ssd. It was planned to use it and winToUSB to put windows on my crush, but I found that it only works with usb2. I do not have installed could cause problems with the installation on another disk.
  • Before say you I can't run windows on an external, yes you can, and many people have. I read windows sees thunderbolt internal disks.
  • I read a few other posts on this and other sites on this problem, but could not find a pertitnant solution to my situation. I found one that suggested to remove the efi on my disk partition, but that seemed like a bad idea, so I didn't try.
  • I write this at 1 in the morning after a day spent in front of the computer trying to get this working, so please excuse typos typing or other. I am pleased to provide you with any pertinant information helping you will help me.
  • Thank you!

  The other thing I tried also almost succeeded:

  Although I prefer to get the method above works, because it seems the most promising, is something else, I've tried that I thought worth mentioning. If you offer advice pertaining to this method rather than the above, I would appreciate it if you could explicitly declare that at the top of your answer. Thank you.
  

  I tried to install windows on the physical disk using vmware and virtual box. The instrutctions I followed for this can be found here: http://www.andrewsavory.com/blog/2011/2156 (the only thing different, it's because it's on an external drive, I created the Fat 32 partition manually using disk utility). The first time (using vmware) installation seems to go off without a hitch, but I couldn't get my computer to see the windows partition as bootable with the boot efi menu hold-option regular refined or with system preferences-> startup disk. I think that I was using always inadvertently a hybrid-MBR at this stage. I tried to repeat this new beginning with the first two steps above to avoid the hybrid-MBR. But now when I try to create the virtual machine based on the gross vmdk, it starts to copy the files then says not sufficient permissions and fails. I don't know if it's a permission with the disk or the hard problem. I tried chmod 777 and chown $USER of the vmdk disk (/ dev/disk1s3) does not.

  Wow, that was a long post...

  1. when a second drive is detected by the Windows Setup program, he wants to create his own brand of EFI (104 MB) and not to mess with the Mac EFI (200 MB). You can force it to use the EFI to the Mac using Diskpart commands.

  2 instead of HFS/FAT32, create a piece of 750 GB free space and it should only get a new MSR/MSD, without the part of EFI.

  3. on your VM method, the link you have is quite old. You have a MP 2013, with references to the 2010 Mac alumni and is a bit too archaic to be useful. http://forums.macrumors.com/threads/install-a-Windows-7-partition-on-Mac-OSX-Wit hout-optical-car-or - usb.1836959 / #post... seems to work for many and can be useful for a test. It also uses Winclone.

  4. you can also try http://bleeptobleep.blogspot.com/2013/02/mac-install-windows-7-or-8-on-external. html .

• Triggering off the coast of beginning of Pulse Audio in question DAQmx...

  Hi guys,.

  First of all, it is more a matter of software than hardware, so I didn't post this specific question in the multifunction DAQ card...

  So I'll try to trigger an acquisition finished off the start of a pulse audio, however I have audio sync issues, due to the fact that it can be started before my VI runs. As noted below, the audio is generated and pulsed for 500ms on and 500 ms off the coast, and between these periods, a digital pulse is generated this way (shown in red). I have a problem to stay synchronized, due to the fact that I samples finished for 1 second of a data value, and if the USE EEG is faster than me, I can catch the pulse audio at Midway, rather than at the beginning.

  

  I'm trigger analog outboard of a sound signal of 50mV and capturing two audio channels simultaneously and consistently captures 3 digital channels when they receive the trigger of the beginning of analog input trigger reference digital edge. If digital are slaves and audio is the master in this configuration. The point of this is to get a delta timed material at the time rather than use the timestamps of windows.

  As I said, I use an Analog Edge Trigger Start to start my purchase, what triggers the digital task Digital Edge Start Trigger to start as well. How can I make sure that I start at the BEGINNING of a new pulse audio if I get out of sync, I can't understand this logic... Analog edge goes off just when it goes to the specified level, but maybe it's at half way through the 500ms pulse, so this is my problem...

  I need to be a trigger to start because I do 55 000 this test iterations in a QMH Prod/consumer model and need relaxation to be redeclenchables and start-up is only redeclenchables.

  The variability in timing you see at points 2 and 4 somewhat dictate against the possibility to set up a re-triggering precisely timed by the hardware configuration.  I think that you need to abandon the idea of making repeated sampling finished back to back and switch volleys in a mode of continuous acquisition and treatment.

  To help with this, I aim to capture the moments of digital via meter rather than DIO pulses and be ready to give up the acquisition rate noise much (if necessary) given that you said that your main concern is to distinguish between ON and OFF.

  I must configure the counter to use the Digital pulse as a sample clock and use the sample clock signal HAVE the "time base", i.e. the signal which the edges will be counted and buffered in memory.  This will give you 2 samples per second instead of 5 M and the values of the counter at these sampling points is the index in your AI data which occurred impulses.  Pretty neat and clean.  Just be sure to start the task of counter in front of the task to HAVE it.

  -Kevin P

• typing in the Explorer file begins to automatically search

  Hello!

  I encountered a problem. A few days before that it was not in the PC. The problem is when I type a number any easily go the file name, it starts to search for in the search on the top corner options right most corner. should not do this because before when I used to typing the file name lets say 100 (for example in the folder specified below, I have some PowerPoint files and pdf files, it highlighted 100-wyas-to-keep-kids-busy.pdf and after that he moved to other files having100-wyas-to-keep-kids-busy.pdf in the beginning of the file name and I used quickly it. now it does is rather than do everything what I type written in the search box in top right most corner and starts the search. I tried it on this site, but I could not find...

  help on this will be so appreciated...

  for your convenience, I downloaded video on google reader... desired.wmv file is needed as it was before...

  the desired.mwv link is

  desired.wmv

  not required.wmv link is

  not required.wmv

  no required.wmv describes the current situation that I don't want...

  Thanks in advance...

  Post it here after I have reset once again to the option file and observed to view and restore the default value for the setting of the advance. I thought that it might work , so I reset the display of records and applied catering for setting advance, as shown in the rectangle and Hexagon respectively. Glad to see that it worked...

  Thank you very much for the tips...

  

• What do I need to use the database shall begin backup mode to perform the backup?

  Hi all

  I have a primary database to 10g (10.2.0.4) with intelligence on a solaris platform. I need to create a different primary eve for the same database.

  I stopped the recovery based on standby and began copy (copy of the os) the existing files pending at the 2nd backup server. But I didn't keep the (mounted) existing standby database into begin backup mode. Is this right?

  Thank you

  Arun

  For a mounted database backup mode?

  orclz >

  orclz > startup mount

  ORACLE instance started.

  Total System Global Area 788529152 bytes

  Bytes of size 3050600 fixed

  373293976 variable size bytes

  406847488 of database buffers bytes

  Redo buffers 5337088 bytes

  Mounted database.

  orclz >

  orclz > alter database begin backup;

  ALTER database begin backup

  *

  ERROR on line 1:

  ORA-01109: database is not open

  orclz >

• Move the indicator to the end or beginning of project timeline

  Using PE 13.1 in a WIN7 PC...

  Is there an easy way to move the indicator in the timeline to the end of the project?  Or even at the beginning?

  Whenever we use the button display the timeline indicator jumps at the beginning of the project, which can be a pain when we don't work at the end.

  The only way I could go to the end of a project, once made by pressing the icon to go to the next edit Point several times.

  HOTELECHOMIKE

  Hittting the key Home take the timeline indicator to the beginning of the timeline.

  And pressing the button end should take the indicator timeline until the end of the content of the timeline.

  Any... click on the work area bar in the area you are in order at this point, the indicator of chronology.

  There is yet another... go to edit Menu/preferences/general and remove the check mark next to the preference named "Play work area after previews." The timeline indicator will be in the same place before and after the timeline is rendered.

  Please consult the bulletin and review, and then let us know if everything above worked for you.

  Thank you.

  RTA

• Can I delay the prompt to begin to allow the USB device to connect in time?

  Hello

  I use a guest linux 2.6 on the host of windows 7 that is running a GPS Simulator she starts and sends the GPS signal on a USB port. However, it seems to begin quickly on the USB be detected. If I stop and restart the Simulator after than the VM has started, it works fine.

  So I was wondering if I can delay the start of the virtual machine so it has time to detect the USB device first.

  Thank you

  Hi TracMap,

  Welcome to the forums.

  You can add a delay of starting your virtual machine. Manually change the configuration of your VM's VMX file and add a new line with:

  -bios.bootDelay = "xxxx".

  'xxxx' is in millisecond. During this period, the virtual machine will stay on the screen of the BIOS in waiting for an entry and then start normally.

  I hope it will work for you!

  Good luck.

  Concerning

  Franck