the pen of apple works on any ipad or just the pro?

Similar Questions

• Can LabVIEW Embedded for ARM works with any Board or just with a few predefined?

  Hello

  Can LabVIEW Embedded for ARM works with any evaluation committee or just with a few predefined (MCB2300, MCB2400 and EK-LM3S8962)? I ask this question because even if I chose "another processor" in the definition of the new project only 3 options are the corresponding arm of Phillips and LuminaryMicro.

  Thanks in advance,

  Howdy,

  LabVIEW for ARM supports the feature of targets for tier 1 (the mentioned Evaluation Committee) following this schema:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7066

  But you can transfer to other weapons if you follow this porting guide:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/6994

  The uProcesser SDK is intended for the port of other targets of DEPENDENCE (32-bit, of course) and technically it covers ARM as well. Alternatively, there are the LabVIEW C Code Generator: http://sine.ni.com/nips/cds/view/p/lang/en/nid/209015

• Hi-i just installed photoshop - the sensitivity of my wacom stylus pen does not work? any tips? Thank you

  I went to-window-brush and adjust the sensitivity of the pen, but this doesn't seem to work.

  What are the settings under "Stift", specifically the "Tip Feel" (something like "Spitzensensibilitaet" perhaps)?

• Feather of apple works well with the iPad air2

  I would use a pen to take notes and ratings on Adobe reader etc. will be (or is) the pen of Apple works well with iPad air2?

  # Apple pencil is only compatible with the iPad Pro.

• Pencil of Apple works with the other iPads, or iPad pro?

  Pencil DDoes Apple works with the other iPads, or iPad pro?

  It works with the Pro

• I recently bought Apple TV but the TV I want to hang up to does not have an HDMI input.  I bought a converter HDMI cord at Radio Shack, but it did not work.  Any suggestions?

  I recently bought Apple TV but the TV I want to hang up to does not have an HDMI input.  I bought a converter HDMI cord at Radio Shack, but it did not work.  Any suggestions?

  You may be able to find a connector to work but which would not guarantee that he would not stop working on the road. Minimal tech spec of the ATV4 is a HDMI connection to the tv. My recommendation is to upgrade your TV rather than trying to get a square peg in a round hole. That's just my 2 cents...

• My turn/orientation no longer works on my iPad 2 since the last update.

  MY orientation/rotation no longer works on my iPad 2 since the last update.  I have

  turned to focus on, and power off, then on again, but my screen remains locked.  I also went to the settings and turned on and off, and then on new orientation, but the screen is always locked. What can I do?

  Try to hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  If that doesn't help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the data if possible. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

  If the steps above do not help, you may need to test in an Apple store.

• Shuts off and won't come back on iPad. Just shows the Apple logo. Does that mean and what should I do now?

  When I woke up yesterday morning after charging my ipad I just couldn't turn my ipad until I plugged in the laptop... worked well

  Yet once, I woke up this morning it's the same thing, but now all I see is a dim apple logo and it will turn back not... do not update AFAIK.

  Does that mean and what should I do?

  Try a forced reboot and see if that fixes it. Hold on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen.

• The pencil of apple works through a protective screen

  A screen in tempered glass protector will have no effect on the use of a pencil to Apple. It is with a Pro for the Ipad. I understand that they are robust enough, but these are my grandchildren, 3, 7,8,9,14. Children love the drawing and will love the pencil. They will also love fighting top!

  I just bought the iPad 9.7 inch Pro. I also have the pencil of Apple. I installed the bulletproof glass of armor tech screen protector and pencil works quite well. Sensitivity to pressure and everything works well.

• Adobe draw: circles of wandering plot lines - Pro w pen for Apple iPad

  Hi all

  Brand new iPad Pro owner here. Was super excited to use it after attending a seminar online last week featuring Brian Yap working on his iPad Pro.

  So, my pencil from Apple arrived today and the first thing I did was start Adobe draw to work on a commissioned illustration, I need to do by the end of the year.

  I have a strange problem where if I draw a line when I get to a curve or the angle of the line, Adobe draw creates a large circle on the anchor rendered completely useless of the drawn line. It happens especially if I shoot a little slowly. If I shoot really fast, it is not the case. Honestly if I'm not as I draw everything that slowly.

  It doesn't matter if I have my Palm on the iPad or use it without touching my Palm. It is about 50% of the time.

  Since it can be difficult to visualize what I mention, I just went ahead and made a video capturing what's happening.

  !

  You can clearly see on the second line I draw, but then you can see it happening on two additional lines as well.

  Everyone knows this? My pencil to Apple is somehow defective?

  It took me weeks to find the pencil of Apple stock, and again, I have a project that I have to do and was really looking forward to using the iPad Pro for. But if enough people tell me that they don't know this, I will try and find a replacement for the pencil itself.

  Or is it just a behavior of the application? I will say that I quickly checked the pencil in some other applications, and happened to something else. Just Adobe draw.

  I am very pleased to announce that this issue is resolved in the next version of the draw. I could check it out and he is back to normal.

• Photoshop pen pressure only works in the new Document

  I'm having a problem where open any document recorded photoshop previously causes the pressure of the pen to stop working. When you open a saved document previously, I have a little guy of caution icon next to any setting defined in regulation of the stylus pressure in the pane of the brush. Hovering over the icon warning gives me a ScreenTip that says "pen pressure control requires the use of a pressure sensitive tablet.

  If I open Photoshop and create a new document, everything works fine. But once I open any file created previously, pen pressure completely stops operating until I have restart Photoshop, even if I create a new document from there.

  Anyone encounter this? It's really driving me crazy. I use a Cintiq 21UX (driver version 6.3.4 - 3) with Photoshop CC (14.1.1) on a Windows 7 computer.

  Recognizing the pressure does not depend on anything in the document.

  Contact Wacom, since it seems that their driver returns inconsistent results.

• Can I watch the movies on my Apple TV on my iPad?

  Can I watch movies purchased on my Apple TV, on my iPad, while others use the TV and Apple TV?

  Yes.

  It there is no connection between the iPad and Apple TV that respect, just start the movie as and when you want. The only question to know is if you have enough bandwidth on your internet connection if stream you movies of 2 or more at the same time.

• How can I set p apple pay on my iPad. There is nothing in the settings

  I just got an iPad pro and have an earlier version. There is no booklet in settings, but that's what the instructions do say.

  Here's what you'll need:

  • Your iPad Pro, 2 Air iPad, iPad mini 3 and later *.
  • The latest version of iOS
  • A bank card supported

  Add your card:

  1. Go to settings > portfolio & Apple pay.
  2. Press Add a credit or debit.
  3. Follow the steps to add a new card. If you are prompted to add the card that you use with iTunes, simply enter the security code.
  4. Press Next. Your bank will check your information and decide if you can add your card to pay Apple. If your bank needs more information to verify your card, they ask for it. When you have information, to return to the settings > portfolio & Apple pay and tap your card.
  5. After your bank verifies your card, press Next. Then start using Apple pay.

  You can also Add cards rewards to pay Apple. Get help adding your card to pay Apple.

  More information in this link of support > configure Apple pay on your iPad, iPhone, or Apple Watch - Apple Support

  You may have to identify your iPad model > identify your iPad - Apple Support model

• Bought two of the iTouch, one for my wife and one for me. In the Notes his has the "" symbol for the formatting and mine does not work. Any suggestions?

  I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.

  Could you please include screenshots of the so-called issue?

• It will work with an iPad, and it let me not use the browser on the iPad?

  It will work on an iPad, and I'll always be able to use the browser on the iPad?

  Hello:

  Please understand that Firefox is NOT available for iOS (iPhone, iPad, iPod Touch), Windows Phone, Windows RT, Bada, Symbian, Blackberry OS, webOS, Android - x 86 or other mobile operating systems:

  For more details, see Firefox will work on my Mobile device .

  Thank you.