Similar Questions

• Libretto U100: pictures are wider than they should be tightened

  When viewing my photo file, all photos are wider than they should be tightened. I guess that's because the screen is a 'big screen '.

  Is it possible to display the photos in the normal width? Do I need to change the settings to do this?

  Thank you for your help.

  Have you tried to change the resolution of the screen?
  Check if the pictures appear stretched using the 1024 x 768 screen resolution.

• TIFF images that I used in trial version are now blurred in the full version of InDesign CS5.5

  I placed two images in tiff format (Visual poems, I did) in a file (a manuscript) using a trial version of InDesign CS5.5, and they seemed crisp and clear. Then I bought the full version of InDesign (the product of education as part of Adobe Creative Suite), has opened the file, and the images two tiff are completely blurry!

  When I open the TIFF in photoshop and consider "actual pixels", they are crisp and clear. The resolution is 300. For images, I tried making a lower resolution, and that did not help.

  Any ideas? Thank you.

  First of all, if you do not see 'reply' on the web page it means that you are not connected.

  Version should have nothing to do with it, and if you actually use the same file for the link, on the same scale, the preview should be the same, assuming the same display quality setting. If you straightened the picture, however, which can cause a difference of display.

  for continuous-tone images 300 DPI should be fine. the line drawings, it is low.

• S110: Flash pictures are too dark when the zoom

  I just got a S110 to replace my S95.  I still know my Reiver way the new camera (despite its commonalities with the S95) and a whim that I noticed is that the moves by using the built-in flash are severely underexposed if I use any sort of zoom.  That is, they are exposed to good right to 24mm.  This was never a problem with the S95 (assuming that the subject was within reach of the flash at all focal lengths, of course).  Others have this problem?  Is there a setting that I'm on?  All my tests were in P mode (or program AE as the manual calls it).  Thanks for your help.

  Hello

  The scope of the flash on your S110 is only 7.5 feet on full telephoto, who is less than 22' on wide angle range. About the S95, it lists about 22' without a distinction between scale and TV. It will be less focused on telephoto than your old S95 at least in part because the variable aperture on your new goal tightens down closer that he did on your old.

  Both devices have a variable maximum aperture (lens opening). This means that the wide angle the lens opens wider it will open the telephoto. So less light can penetrate into the camera when you're zoomed in on something. It is measured by the number f /, and a lower f number means a larger opening. Your new camera is taken down tighter than your old a fact. S95 was f/4.9 max full telephoto. S110 is f/5.9 when the full telephoto. This difference in aperture is perhaps sufficient to reduce the scope of the flash on TV.

  I wonder if the S95 MIT had a concentration of telephoto flash, which may be missing on the S110? I've seen mentioned in the specifications at all well.

• Overview of thumbnails; My photos are not in the thumbnails preview more, how do I activate this new?

  My photos are not in the thumbnails preview more, how do I activate this new? I have windows 7 Home Edition.

  Miniatures,

  Open your my pictures location, click organize in the upper left corner, click folder and search options, click the View tab and uncheck the top option, always display icons and never thumbnails, select apply to records on the top and apply and OK on the bottom.

  If the photo thumbnails appear now but look washed on a right click and select Properties, on the section of the general tab, uncheck the box for the hidden attribute and save it.

  Return to your location of my pictures, change the display of the page on the top of the right side next to the question mark symbol, there is another symbol with a drop-down arrow, click it and select the medium or large icons options specified.

• Imported clips are shorter than the originals (points are configured before you import)

  After you import the folder of clips, some of them are shorter than they should be (from a few minutes). For some reason any the of in and out is already fixed on them and I can't change it. Look at the pictures on my camera (Canon xf100) all images are here.

  * Note that I imported these images on a different hard drive for another project before this current project... it is possible that some meta data has been transferred?

  Well I don't know why he was doing this... However, I have just re-copied the pictures from my camera with Canon XF utility this time. It works now. Thank you for taking a good glance!

• Analysis of the table in in. Long is more than 100% full

  Hello
  
  I have just run a query and got an unexpected result of session long ops
  

  Operation   % Complete  Elapsed Remaining   Total   Start Time          Predicted End Time
  Table Scan  176.64      849                         01.02.2011 13:34:30 01.02.2011 13:48:39
  Table Scan  100         24      0           24      31.01.2011 22:28:06 31.01.2011 22:28:30
  ...

  How a table scan can be more than 100% full? And it is still ongoing.
  

  SELECT  vsl.opname "Operation"
         ,ROUND(vsl.sofar / vsl.totalwork * 100,2) "% Complete"
         ,vsl.elapsed_seconds "Elapsed (Sec)"
         ,vsl.time_remaining "Remaining (Sec)"
         ,vsl.elapsed_seconds + vsl.time_remaining "Total (Sec)"
         ,TO_CHAR(vsl.start_time,'dd.mm.yyyy hh24:mi:ss') "Start Time"
         ,CASE WHEN vsl.time_remaining > 0 THEN
              TO_CHAR(SYSDATE + (vsl.time_remaining / (60 * 60 * 24)),'dd.mm.yyyy hh24:mi:ss')
          ELSE
              TO_CHAR(vsl.start_time + vsl.elapsed_seconds/86400,'dd.mm.yyyy hh24:mi:ss')
          END
          "Predicted End Time"
  FROM    v$session_longops vsl
  WHERE   vsl.sid = :SID
  ORDER BY vsl.start_time DESC

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  Concerning
  Marcus
  
  Edited by: Marwim the 01.02.2011 version added 14:01

  What are the actual values to SOFAR and TOTALWORK?
  What are the values of LINES and the NUM_BLOCKS in DBA_TABLES for the Table being full analysis?
  What is the value for the BLOCKS in DBA_SEGMENTS for the table (assuming that it is not a partitioned table)?

  et What is the request that the session is running?

  Hemant K Collette

  Published by: Hemant K grapple February 1, 2011 22:57

• PC and OS move, now the bridge previews are blurred

  Yesterday I (well good, son - not me!) moved my Photoshop CS4, ACR, bridge, LR2 to a new PC. Operating system from XP to Windows7.

  Previews are blurred; I have cleared the cache, in preferences, I've got selected, extracted size monitor software rendering deselected (selection he made no difference). Video card is GeForceGTX 285.

  Thank you!

  Some individual jpg is blurred. If I right click and delete the cache so that the individual image, I get the crispy preview. What gives? I thought that empty the cache means clear all the cache? I can live with that.   All the cache is not created equal.

  There is the central cache which is the main cache and you can serve in the cache window.  If you have exported cache files this cache is not purged.  To purge the two hide, you must go to tools/cache/purge cache for folder xxx.

  If you get no preview for CR2 files, you probably have either no Camera Raw (ACR), have more than a cab or RTAs in the wrong folder.

  Open PS and in help, click plug-ins, and camera raw.   I will tell you what version you have.  Should be 5.x for CS4.

• I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?

  I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?

  Have you done something after their show.

• How I always use the full width of my screen instead of only about 1/2 for the content? Menu bars are full width, is not the content of the page.

  I want to use the full width of my screen at any time.
  Menu bars are full-width but the content is not, in fact it is about 1/2 possible width.
  I bought a large wide screen to use it without having to increase the size of all fonts.

  Many sites Web uses a fixed width layout and do not automatically expand to fill the available space. It is perhaps for aesthetic reasons or for readability (it is more difficult for your brain to long strings).

  Firefox is not a built-in feature to change the layout, but there could be an add-on that does this.

  I understand that you do not want to increase the font size, but... Firefox zoom feature also expands the page layout and the image proportionally in order to preserve the overall design of the site. This article describes this feature in detail: the font size and zoom - increase the size of the web pages.

  If you find that you are constantly zooming all the sites by a comparable amount, there are modules, that you can use to set it as your default zoom level. For example:

  • Default FullZoom Level
  • NoSquint

• Should I keep plugging my iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my iphone until the full download?

  I am a new user of Iphone, I must he keep plugging my Iphone to the computer during the update download process? especially the download will take too long because it is more than 2 GB and my internet speed is not fast, I can unplug my Iphone until the full download?

  Without doubt, but why not just make the day downloading overnight?

• The names of source files are larger than is supported by the file system...

  "The names of source files are larger than is supported by the file system. Try to move to a location that has a shorter path name, or try renaming to name more short (s) before performing this operation. »

  There are about 10 subfolders on the computer. None can be deleted, moved, or renamed without one appearing in the message. I tried UNLOCKER ASSISTANT & DELINVFILE get rid of this file. Once more, none worked. Command prompt did not work as well. Please help me, this issue will not go away on my desk.

  Try first to remove bypassing the Recycle Bin using SHIFT-DEL(thanks, Michael Murphy) rather than just led

  Try to use one of the following free products to remove the file/folder.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion and you have to force the deletion in this case: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.  Have you tried Unlocker (I don't know if it's the same as Unlocker Assistant) but if this if it is different, gives it a try.

  Here is an article on this topic (related to another topic, but essentially the same problem) with a number of suggestions - which can work for you: http://www.howtogeek.com/forum/topic/how-to-delete-source-file-names-are-larger-than-is.

  I hope that one of these options help.  If this isn't the case, after return and we will see if we can find another answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• __File names are larger than is supported by the file system

  I tried to upgrade from Vista to 7, but the upgrade attempted to restore Vista.  To exit a loop of reboot, I started from the drive of W7 upgrade went to the command prompt and found a folder with subfolders 25.  After moving them to another directory, I was able to get the roll to Vista is complete.  I tried to delete the record with 25 subfolders.  But I get the error message "the folder contains items whose names are too long for the trash.  and "the names of source files are larger than is supported by the file system.  Try to move to a location that has a shorter path name, or try renaming to shorter name (s) before launching the operation".  I tried shift-delete to bypass the Recycle Bin, but it does not work.  I tried moving and able to copy to a different folder after what I was able to remove the old records but could not delete the new folder.  Now, for some reason any I can rename the subfolder name (they were all named "Downloads"), but when I did it it would create several subfolders named "downloads".  So now I have 60-70 subfolders, rather than the original 25.

  Does anyone has a suggestion or a program to help me remove the offending folder?  Should I go on my recovery drive and recover Vista of the D: drive on the C: drive?  If this does not work, will it reformat the hard drive?  If I reformat, how to move to Windows 7?  Thanks for any help.

  HII secoch ,

  Thanks for posting your queries.

  I hope you have this problems, but this forum is to help everyone, I want something here too, I did too and it really helped.

  First thing is you do not need to download all programs for this.

  Like, Windows has problems dealing with extra long path/filenames. If the
  combination of the names of access road and closer to 255 characters (127 for
  Windows 95/98/me) Windows probably not manage it well, if you try to remove or
  Rename it (you can create it, but not change it). The first
  thing is trying to rename some of the files which lead to the queue
  himself. The directory displayed a level of return, and then select Rename the
  folder the file is located in. Try a single letter (of course, to keep a record of what
  folder you called that so you can reverse the process!). Then, return to the
  file and see if Windows then you can rename or remove. Otherwise, go back
  yet another folder and rename this one and so on. At some point, you should be
  be able to find a series of folder names of reduced length which you can then
  Rename the file to a name that is short enough to allow you to recreate then
  the original directory tree and still work with the file in question.  In fact, the main goal is to try to make the shortest path of length instead of only the file name and the folder name.

  I also hope that this help option.  If this isn't the case, please after return or PIN me.

  I am always available on mail too-> * address email is removed from the privacy *.

• Manager tasks shows my CPU 100% usage but when I go to the process tab only a handful of programs with a percentage higher than 0 if displayed and none of those who are more than 3%

  Original title: Task Manager

  Manager tasks shows my CPU 100% usage but when I go to the processes tab and sort by CPU usage there are only a handful of programs with a percentage higher than 0 if displayed and none of those who are more than 3%.  What else is using my system resources that is not displayed by the Task Manager?

  Click Show processes from all users . There may be other systemic processes and processes that run under other accounts.

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Subfolders are missing & folders are empty, but the properties display the full amount

  I had to restore my laptop to factory settings, but I didn't lose my music library & some other files. Then I copied to my hard drive external and placed in a folder. After the restoration, I opened my external hard drive to see some subfolders disappeared, and records that were there, it shows that they are empty. But when I check the properties, I still see the full amount (27 GB) which was copied in the first place. Even when I copied the file to my external hard drive to my laptop restored, he showed that he copied 27 GB & all of its subfolders. Why can I not see my files?

  Hello

  Maybe the files/folders are hidden.
  Show hidden files
  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files