The pivot in Tecra S1 and duplicator?

I would like to use the pivot of my TFT under my Tecra S1 which is anchored.

No chance for this?

See you soon

Lutz

Hello

As far as I know you need a 3rd party software that should be supplied with the monitor.
But it works on the unit not rooted?

Also check this post on a similar question:

http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=5&ThreadId=9726

Tags: Toshiba

Similar Questions

How to show total pivot in value only and percentage only column
Hi all

I want to show the PivotTable by percentage of column only (no value), but the total in value only without display of percentage.

How to do this?

Thank you
Ling
Here it is 2 different approaches:

(1) is something like
Bike = $253 M = 20% = 27% = 53%

Extract columns as
Product, region, dirty, dirty---> region is for values(East,West..), % and other sales is for Total as below
for the first sale exp: ((sales*1.0) /sum (sales by Product)) * 100.0--> column format and the percentage value
for the 2nd sale exp: sum (product sales)

In the pivot table

Columns and product sales (2nd) online
Region to columns
% Sales to measures

(2) you can go with Bike = 20% = 27% = 53% = $253 M

Use a cast as exp: cast (sum (product sales) as char)

If you are not agree with any of these just wait for our Guru David_T. You can get the best solution...

Published by: Srini VIEREN on 28 January 2013 23:50

Problem starting with the Tecra A8 and A9 models

We have about 20 or more, A8 and A9 Tecra notebooks and each has shown signs of the same problem again. If rebotting and netwrok cable is attached, so they will not start. Remove the cable and it is a normal startup.
The A8 has a motherboard replacement (problem existed before the replacement) and is still there now after the replacement. The MB is replaced mainly because the sound card was dead. All machines are running XP Pro OS. The A9 is a novelty. Would be - this driver issue or - this one of my favorite - an update from MS that has caused problems.

> If reboot and the cable network is connected, then they will not start. Remove the cable and it is a normal startup.

Hmm that's strange.
However, I recommend that you check the BIOS settings, please ensure that LAN is not set as first boot device.
Also check if the BIOS has been updated to the State

Sorry, but this is really rare and you should try universal workaround solutions that could help resolve this problem.

How focus a JavaFX Group properly and set the pivot (reverse) by using translations in 3D space?

Description:
I m referring to the Oracle tutorial http://docs.Oracle.com/JavaFX/2/transformations/jfxpub-transformations.htm using the transformations.zip source code, which is available for download on this page. I Don t understand why they Center the xylophone in space 3D like this and why they calculate the pivot (reverse) using translations. So they are creating a large number of groups, including rectangles, representing the xylophone, in addition to finally to a group called "cam".
```
class Cam extends Group {     
     Translate t  = new Translate();     
     Translate p  = new Translate();     
     Translate ip = new Translate();     
     Rotate rx = new Rotate();     
     { rx.setAxis(Rotate.X_AXIS); }     
     Rotate ry = new Rotate();     
     { ry.setAxis(Rotate.Y_AXIS); }     
     Rotate rz = new Rotate();     
     { rz.setAxis(Rotate.Z_AXIS); }     
     Scale s = new Scale();     
     public Cam() { 
          super(); getTransforms().addAll(t, p, rx, rz, ry, s, ip); 
     }     
}    

final Cam camOffset = new Cam();    
final Cam cam = new Cam();    
...    
camOffset.getChildren().add(cam);    
...    
final Scene scene = new Scene(camOffset, 800, 600, true);    
... 
```
The Group "cam" is added to another group called "camOffset", which is added to the 'scene' as root the node.
Until there , everything is understandable to me, but there is a method, called "frameCam (.)" which calls 4 other methods: ""
```
public void setCamOffset(final Cam camOffset, final Scene scene) {         
     double width = scene.getWidth();         
     double height = scene.getHeight();         
     camOffset.t.setX(width/2.0);         
     camOffset.t.setY(height/2.0);     
}    

//=========================================================================    
// setCamScale    
//=========================================================================    

public void setCamScale(final Cam cam, final Scene scene) {        
     final Bounds bounds = cam.getBoundsInLocal();         
     final double pivotX = bounds.getMinX() + bounds.getWidth()/2;         
     final double pivotY = bounds.getMinY() + bounds.getHeight()/2;         
     final double pivotZ = bounds.getMinZ() + bounds.getDepth()/2;         
     double width = scene.getWidth();         
     double height = scene.getHeight();         
     double scaleFactor = 1.0;         
     double scaleFactorY = 1.0;         
     double scaleFactorX = 1.0;         
if (bounds.getWidth() > 0.0001) {            
     scaleFactorX = width / bounds.getWidth(); // / 2.0;        
}        
if (bounds.getHeight() > 0.0001) {            
     scaleFactorY = height / bounds.getHeight(); //  / 1.5;         
}        
if (scaleFactorX > scaleFactorY) {            
     scaleFactor = scaleFactorY;         
} else {            
     scaleFactor = scaleFactorX;         
}        
     cam.s.setX(scaleFactor);         
     cam.s.setY(scaleFactor);         
     cam.s.setZ(scaleFactor);     
}    

//=========================================================================    
// setCamPivot    
//=========================================================================    

public void setCamPivot(final Cam cam) {        
     final Bounds bounds = cam.getBoundsInLocal();         
     final double pivotX = bounds.getMinX() + bounds.getWidth()/2;         
     final double pivotY = bounds.getMinY() + bounds.getHeight()/2;        
    final double pivotZ = bounds.getMinZ() + bounds.getDepth()/2;         

//*1*        
     cam.p.setX(pivotX);         
     cam.p.setY(pivotY);         
     cam.p.setZ(pivotZ);         
//*1*        

//*2*        
     cam.ip.setX(-pivotX);         
     cam.ip.setY(-pivotY);         
     cam.ip.setZ(-pivotZ);         
//*2*     }    

//=========================================================================    
// setCamTranslate    
//=========================================================================    

public void setCamTranslate(final Cam cam) {        
     final Bounds bounds = cam.getBoundsInLocal();         
     final double pivotX = bounds.getMinX() + bounds.getWidth()/2;         
     final double pivotY = bounds.getMinY() + bounds.getHeight()/2;         
     cam.t.setX(-pivotX);         
     cam.t.setY(-pivotY);     
} 
```
If the method ' setCamScale (...) 'is understandable,' setCamOffset (...) ' puts the root node ('camOffset') in the center of the screen, but I Don t understand the 2 following methods at all. Of course, the child ("cam") is not centered, by putting just the root node ('camOffset') in the center of the screen, but how they focus the xylophone / "cam" and set the pivot, using translations:
Questions:
1. Why they use 3 different translations (', 'ip', 'p')?
2. Referring to ' setCamPivot (...) ': Why they are the first translation of 'cam.p' to "pivotX", 'pivotY' and 'pivotZ' and then 'cam.ip' to '-pivotX', '-pivotY' and '-pivotZ' (marked in the source code with * 1 * and * 2 *)? Should he not just put the Group at his position, where it has been positioned before, as if the method has never been called? That would be my guess, because I expect that an object is placed in the same position as before, if I first move with the values X, Y, Z and then return with the same values - X, - Y, - Z in the opposite direction.
3. Even with the method ' setCamTranslate (...) ' ': Why use another translation "cam.t", moving the Group ("cam") with the same values "-pivotX', '-pivotY' (and not '-pivotZ'), which they used in the"setCamPivot (...) method `?
Annotations:
Of course it works, the xylophone is located in the center of the screen and could turn perfectly, without change of rotation point / pivot point, but I Don t understand how they did it. I read everything about layoutBound, boundsInLocal, boundsInParent, blogs about page layout and page layout goes into javaFX https://blogs.oracle.com/jfxprg/entry/the_peculiarities_of_javafx_layout and http://amyfowlersblog.wordpress.com/2011/06/02/javafx2-0-layout-a-class-tour/ and finally a large number of questions to stackoverflow, but I still Don t understand the meaning behind the methods stated.
Before the call of ' frameCam (...) ', they ask:
```
double halfSceneWidth = 375;  // scene.getWidth()/2.0;     
double halfSceneHeight = 275;  // scene.getHeight()/2.0;    
cam.p.setX(halfSceneWidth);    
cam.ip.setX(-halfSceneWidth);    
cam.p.setY(halfSceneHeight);    
cam.ip.setY(-halfSceneHeight); 
```
I deleted these lines, because it doesn't change anything.

The base in place, is that there are three defined different rotations, one around each axis. Of course, these could be combined into a single rotation, but doing so would make the geometry in the mouse dragging very complex managers. As it is, the degree of rotation around each axis can be calculated and changed independently.

In general, the rotations are defined by an angle, an axis and a (pivot) point. The axis is a 3D vector and goes through the pivot point; the rotation is around this axis through that point.

In the configuration in the example, the pivot of each of the individual rotations is set to the default (0,0,0). Because we really want the rotation to be around the center of the group, not the original, the Group translates first point appropriate pivot (ip), the rotations are applied then (around (0,0,0) after translation by ip), then the group is reflected in its location of origin (p). These operations are not commutative, yes show ip, then the rotation, then p is not the same as when you run ip, then p, then the rotation (in the second, ip and p would cancel and rotation would be about (0,0,0) instead of around the Center).

For good measure, there is a scale, that is also applied after ip (so that scaling occurs from the Center, not the original) and then a final translation.

The final effect is that there is a lot of transformations that can be controlled independently. There is a scale (s), a rotation about each axis (rx, ry, rz), and a translation (t). The p in translations and its inverse ip are just "housekeeping" to ensure that rotation and scaling are done from the center of the screen, instead of (0,0,0).

So:
1. Why they use 3 different translations (', 'ip', 'p')?
p and ip are translations for the rotation and scaling are done from the Center and not to the origin. t is a general translation, the user sees.

Referring to ' setCamPivot (...) ': Why they are the first translation of 'cam.p' to "pivotX", 'pivotY' and 'pivotZ' and then 'cam.ip' to '-pivotX', '-pivotY' and '-pivotZ' (marked in the source code with * 1 * and * 2 *)? Should he not just put the Group at his position, where it has been positioned before, as if the method has never been called?

He puts the group to its original position, but other changes are between p and ip. These transformations behave differently (in a planned way) because the group is translated when they are applied.

Even with the method ' setCamTranslate (...) ' ': Why use another translation "cam.t", moving the Group ("cam") with the same values "-pivotX', '-pivotY' (and not '-pivotZ'), which they used in the"setCamPivot (...) method `?

The t values are changed in the mouse Manager (with alt-middle mouse button-drag, which I can't test actually using my trackpad...). As you have noted, the effect of p and IP translation cancel out, so we end up with t, which can be changed by the user. They could have combined t and p a single transformation, but updated since the mouse Manager would have been more delicate, and the intent of the code would be less clear.

Answers: Operation and the sum of the Pivot line is wrong
Hi all

I created an application in responses that combines two areas using a Union All set operation. My goal is to create a report with the same dimensions and two measures of different areas, next to each other. To split the action again (after the Union all puts them under eachother), I added a flag that indicates if the measure came form field 1 or 2 area. And I put above a label as measured in my PivotTable to the indicator.

It works fine, but when I want a total of all the rows in the pivot table, he will just not be the sum in the right way. It shows just the first value found as total, rejecting all of the following values.

Clues?
Gilles
In pivot mode, you can change the aggregation type...
Change rule of the aggregation of measures - more options - default value to sum

I hope this works...
Nicolae Ancuta

After your upgrade my Pinterest account not working well: pivot opens big enough and Pinterest warning is more than the double spindle.

Two things happened the day you did upgrade to 28.0:
1 - upgrade
1. I received a message from this site: http://barisderin.com/?p=1861

Now when I try to locate something of a web page - Twitter for example, pine box opens wide enough for me to click on "View" - I have to stretch both ways AND when I try to locate something I have already pinned, Pinterest Don't warn me that it is a duplicate.

I can stretch the box, although it's annoying that I have - but is no longer, I am convinced that the PIN is not a duplicate, from another Web OR site of inside Pinterest as well. If I can't identify on Pinterest.com - it is useless for me.

I want to emphasize that pinning is very well on the iPad - app - I do not use the tabs in Safari to pin - and I can't pin App App not sure if the box is opened wide enough, but he tells me I am pinning on a duplicate.

I pin a lot of outside Pinterest so I really find these two situations to be a problem. Hope you can solve!

Another thing I'm not sure - is where this site came to tell me that my Pinterest Button had been updated with success - is the part of your upgrade? I did nothing more to read the page and save the URL. It's on my screen when I came back to the PC after having turned it on.

Thanks for any help you can give me!

Donna Olson

Hi pacearly,

Thank you for your question, I understand that when you try to pin a site, the pin code window opens wide enough to make you click the PIN button. This sounds boring. I understand also that duplicates are not is more detected when trying to locate some Web sites. I also understand that this function works in safari but not Firefox.

This looks like a job for Web compatibility team. This team is dedicated to helping the Firefox browser to make Web sites as they are supposed to. Please try a new profile to make sure this isn't a preference which is block this feature on the site by using the Profile Manager to create and delete profiles Firefox if it happens again please add your description of the problem and a capture of journal or the screenshot of the Web page on this site : http://dev.webcompat.com
If you have any other questions on this subject, we are happy to help you.

For more information on troubleshooting the addons:
Thunderbird-Add-ons-frequently asked questions

Trouble with the pivot and the columns that contain numbers/spaces
Hello

I have trouble with the pivot statement.
How could I do this just for columns that are numbers?
How could I do this just for columns that contain spaces?

Can someone please help?

based on the documentation of Carsten Czarski
http://SQL-PLSQL-de.blogspot.com/2007/08/kreuztabellen-in-Oracle11g-SQL-pivot.html

essentially to help:
--------------------
Select deptno, sum (clerk), sum (salesman), sum (manager)
of (emp) pivot
Sum (SAL) of EMPLOYMENT
in ("CLERK" as a 'CLERK', 'SELLER' as 'SELLER', 'MANAGER' as 'MANAGER')
)
Deptno group
--------------------
DEPTNO SUM (CLERK) SUM (SALESMAN) SUM (MANAGER)
---------- ---------- ------------- ------------
30 950 5600 2850
20 1900 2975
10-1300-2450

I tried to run at my own table:

NAME MONAT WERT
-------------------------------------------------- ---------- ----------
5 Antarctica 404,84
Asia 7 106,41
Oceana 2 456,96
4 the Europe 426,23
9 Antarctic 537,56
Europe 9 832,58
The South America 12 662,41
Europe 4 422,27
America of the North 7 312,19
America of the North 10 148,92

10 selected lines.

But running:
--------------------
SELECT name, sum (1), sum (2), sum (3), sum (4), sum (5), sum (6), sum (7), sum (8), sum (9), sum (10), sum (11), sum (12)
(pivot) apex_wksp.demo_pivot2
Sum (Wert) for monat
in ('1 ', '2', ' 3', '4 ', '5', '6', '7',' 8 ', ' 9',' 10', ' 11 ', ' 12')
)
Group by name
;
--------------------
led to:
Antarctica 1 2 3 4 5 6 7 8 9 10 11 12
North America 1 2 3 4 5 6 7 8 9 10 11 12
Oceana 1 2 3 4 5 6 7 8 9 10 11 12
The South America 1 2 3 4 5 6 7 8 9 10 11 12
Europe 1 2 3 4 5 6 7 8 9 10 11 12
Asia 1 2 3 4 5 6 7 8 9 10 11 12
6 selected lines.

not quite what I expected.

In addition,
--------------------
Select monat, sum (Antarctica), sum (North America), sum (Oceana), sum (South America), sum (Europe), sum (Asia)
(pivot) apex_wksp.demo_pivot2
Sum (Wert) name
("Antarctic", "North America", "Oceana", "South America", "Europe", "Asia")
)
Group by name
;
---------------------
ORA 907 results

I know what the problem is - but how do I do it right?

using double quotes or replace (ing) space with just underscores seems to garble sql for the unreadable.

Help, please.

Thanks in advance,
Michael Weinberger
Attention to the rotated default column alias:
```
SQL> with demo_pivot2 as (
  2                       select 'Antarctica' name,5 monat,404.84 wert from dual union all
  3                       select 'Asia',7,106.41 from dual union all
  4                       select 'Oceana',2,456.96 from dual union all
  5                       select 'Europe',4,426.23 from dual union all
  6                       select 'Antarctica',9,537.56 from dual union all
  7                       select 'Europe',9,832.58 from dual union all
  8                       select 'South America',12,662.41 from dual union all
  9                       select 'Europe',4,422.27 from dual union all
 10                       select 'North America',7,312.19 from dual union all
 11                       select 'North America',10,148.92 from dual
 12                      )
 13  select name, sum("'1'"),sum("'2'"),sum("'3'"),sum("'4'"),sum("'5'"),sum("'6'"),sum("'7'"),sum("'8'"),sum("'9'"),sum("'10'"),sum("'11'"),sum("'12'")
 14  from demo_pivot2 PIVOT (
 15  sum(wert) for monat
 16  in ('1','2','3','4','5','6','7','8','9','10','11','12')
 17  )
 18  group by name
 19  ;

NAME          SUM("'1'") SUM("'2'") SUM("'3'") SUM("'4'") SUM("'5'") SUM("'6'") SUM("'7'") SUM("'8'") SUM("'9'") SUM("'10'") SUM("'11'") SUM("'12'")
------------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ----------- ----------- -----------
Antarctica                                                    404.84                                      537.56
North America                                                                       312.19                            148.92
Oceana                       456.96
South America                                                                                                                                 662.41
Europe                                              848.5                                                 832.58
Asia                                                                                106.41

6 rows selected.

SQL> 
```
SY.

Tecra A4 and Win7 - problems with PCMCIA card driver

I've recently updated my old laptop Tecra A4 - PTA42E - (in great condition however) for Windows 7 and it is now in the best shape ever except for the PCMCIA card. In fact, to have Windows 7 installed I had to rename the pcmcia.sys and pcmcia.inf files during the installation (to .old or .bak) otherwise the new operating system would not start. The same problem has been experienced by many other users Tecra A4 and the solution is available in a number of forums.

Although I use no more than the PCMCIA card slot, I want to fix this for a reason: If, in the future, I need to re - install Windows 7 for some reason any on this laptop, I have to repeat the same process - rename the pcmcia.sys and pcmcia.inf during installation, in addition, the new operating system does not start.

I do not understand that the original drivers from the card slot (Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7, but it is there any updated driver that works for windows 7? And if there's a how can I replace the old drivers in my system so that in the event of re - install Windows 7 I will not have to go through the same process? TI site is no help, and Toshiba does not all drivers to download.

Last but not least, if there is a driver available, I used the card slot for 2 ports USB 2 or 3 additional which are really necessary.

Thanks to the forum, in advance

Hello

The pcmcia.sys and pcmcia.inf files are part of the Windows System.
This driver isn't provided by laptop manufacturer, but it is a Microsoft internal driver.

You mentioned that the pilots of the original card slot Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7.

To my knowledge, this driver does control not the PCMCIA location but this driver controls the card reader that supports the MMC card, SD card, card xd picture card, SM card, Memory Stick and Memory Stick Pro.

However, the Tecra A4 is very old model of laptop. The driver will not be updated for this camera and it looks like Windows 7 drivers never had to be released the driver Toshiba UE

Tecra M9 and compitable motherboards

Good day to all
My Toshiba laptop Tecra M9 PTM91E - 12R features of a faulty video card.
I replaced this card many times, but it's always get bad after a while.
My repair shop of my recommended to replace its motherboard in order to get a solution permanent.

I'm not sure if I am looking for motherboards Compitable with my product

Can someone tell me please with PART NUMBERS of SPECIFICATIONS AND motherboards that I can buy?

Thanks in advance for your support

> Any can advise me please with PART NUMBERS, specifications AND motherboards that I can buy?
Hmmmm... It is not as easy as you think. Defective parts will be exchanged on mobile units with only identical hardware components. It's a completely different situation than on desktop systems.

You can visit the nearest Toshiba service provider and ask for help, but you will see that they will not be able to help you.
Fact is that Tecra M9 was offered with two hardware platforms. PTM90E and your PTM91E.

In the end, I must say it's really strange that you have an ongoing problem with GPU defective. When everything is changed on professional way and you take care of the machine and don't forget laptop is cooled properly I don t see the reason why it should be defective over and over again.

For 3 years I have Tecra A11 and use almost every day for my small business and there is no problem at all. OK I use for typical every day activities such as web or MS Office and not for games or other graphics intensive applications.

Try to contact Toshiba service provider in your country and ask for advice. They should have access to the material database of Toshiba and maybe they have good advice for you.

If possible, send feedback.

Difference between Tecra M10 and Tecra A10

Dear forum
The above says everything really.

I see the two look identical, but one is smaller. These two models are different in other ways please.
Ian

Of course, the two laptops are different.
There are different models Tecra A10 and there are different units Tecra M10.

For example:
Tecra * A10-13 b * supports Intel GM45 chipset and an Intel Core 2 Duo P8400 2.26 GHz CPU.

Tecra * A10 - 1 2 * supports an Intel Core 2 Duo T9600 2.80 Ghz CPU Intel GM45 chipset

You can find details of different laptop models left here:
http://www.Toshiba.EU/discontinued-products/
Then, you can compare all the pieces of hardware.

How to reset the BIOS on Tecra A10 password?

Hello

Is it possible to reset the BIOS on a Tecra A10-112 password?

Thank you!

Of course, there's way, but this kind of info is top secret and certainly not to be posted on the public forum.
This is characteristic of very important security and cannot be discussed here.

Contact the nearest Toshiba service provider and they can remove for you.

No sound with Tecra A9 and Windows 7

Hello

I just installed Windows 7 on my Tecra A9 and now: no sound. I ' v installed all the latest drivers but nothing to do: no sound.
Does anyone have the same problem? And especially have solved?

Thanks for your help.

PS: The mute off the coast of the working tools doesn't work with Tecra A9 (is there an update?)

Hello

> I've tried the mute off tool, but it is not compatible with Tecra A9
You need to install the VAP (Toshiba Value Package utility added) before using this tool!

Check again!

Tecra A2 and starting problems

I m using a Tecra A2 now for 5 years. The last few months a problem when starting accurse.

Normally all the icons for the programs that I need as the printer, graphics for 2 mobile screens control, program backup, its, etc. are in the status line at the bottom of the screen to the left. This is useful to quickly obtain information and access programs. But from time to time, this status line is therefore more complete. Even the arrow to display hidden icons disappeared.

Just recently, I discovered a rather unorthodox solution.
When I put a blank DVD in the drive, open the file manager, try double click to open the drive, the message: Please check the CD in drive d: / is considered.

When I try to close on the X window close program (because the DVD is not responding) accurse, one I click to close immediately.
That hangs in the display, after a certain time the missing icons are all included.

Does anyone has a similar problem and could solve it? Toshiba hotline gave me the advice to format the hard drive and restore the system. This should be the last option.

Hi Torsten

It's really hard to say why all this is happening...

Maybe you should clean the Windows registry using CCleaner. It s worth a try! ;)

On the issue of DVD player, maybe you have to clean the lens using microfibre cloth and be careful if you clean.

Last but not least, I can only agree with Toshiba customer service. You must reinstall Windows using Toshiba recovery disc. It only takes a few minutes and then you have a clean OS with all the drivers again. :)

Tecra M11 and asset Tag

Hello

I'm looking for how to set asset tag information int smbios for a PC toshiba laptop tecra M11?
I found this LINK post: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=40167] but the assettag tool. Exe do not take the tag after the reboot.
Any idea please?

I put t know if you have the European portable model but here in Europe this tool is not available for customers and such things must be performed by authorized service provider.

If you want you can try to contact the nearest Toshiba service provider and ask for help.

As you can see in other thread user last posted the link to the Toshiba U.S. support page.

Tecra M9 and M10 wheel Volume does not not under Vista

Hello

I hope that someone can help me, I'm Vista using Microsoft Deployment Workbench deployment for Tecra M9 and M10 material and the volume knob will not work. I added the drivers of Toshiba in Deployment Workbench, while they are presented the machines via Plug n Play, volume button do not work. I also deleted the drivers of Deployment Workbench and installed the drivers manually on the machines, this installs fine, but volume knob will not work. I have two development servers, Win Server 2003 and Win Server 2008, the two do not run successfully the pilot slots.

If I deploy a standard Win Vista Enterrprise 32 bit OS of DVD hardware, with any driver when it is installed, the volume wheel works. I can then manually install the audio driver and the volume button still works. But if I deploy the same exact DVD based OS of Deployment Workbench, the volume knob does not work?

Any help would be greatly appreciated, as this is doing my head and holding up the deployment of the new image.

Thank you
Paul

Maybe you are trying to install the driver Audio of M9 M10 or vice versa?

You install the driver Chipset Intel and value-added package first? (this is important)

The pivot in Tecra S1 and duplicator?

Similar Questions

Maybe you are looking for