The problem of the distribution of the data in the cluster of NoSQL Oracle databases
Hello
I write (about 10 G) data in an Oracle Databae NoSQL cluster (which consists of three nodes: ud1, Node2, node3). It has only one table in the DB and I create an index on a field.
The amount of data in each node is about 16G.
Then I write the same data (about 10G) in an Oracle NoSQL Database (Only one node) and I create an index on the same lot.
But the amount of data is about 46G.
So I assumed that each node holds no data complete. Then if the failure of a node, the cluster can still work but some data cannot be queried. Am I wrong?
There is an intersection in the form of database on each node?
You should take a look at the documentation. For example:
http://docs.Oracle.com/CD/NoSQL/HTML/AdminGuide/introduction.html
-mark
Tags: Database
Similar Questions
-
The course I did for the OCP certification in Oracle Database 11 g does not appear on the view list of courses on the pearson Web site, I sent an email to [email protected] < deleted by the moderator e-mail address > , no response within 7 days since 01/28/2015, enamel is lower, the title of my course is in Portuguese. What should I do in this case?
------------------------------------------------------------
Dear Oracle.
I send you this mail because recently I passed the exam 1Z0-053-Oracle Database 11 g: Administration II, which is the last review necessary to acquire the OCP Certification. However, in the path to certification, I need to prove that I participated in an official Oracle training.
Research for the course on the site to view pearson, I did find the name of course on the list. So I'm sending you this email with the courses required for certification information. I attended the course at FIAP College (http://www.fiap.com.br/en/conheca-a-fiap/parcerias-estrategicas/), in the city of São Paulo (Brazil) of March, 2010 until March 2011. The above link is possible to check that the University is a partner of Oracle. The title I had was "Graduate in Oracle Database Management".
In this e-mail, I have attached a copy of the certified course FIAP (front.jpg, certificate Back). I also send my profile data in the site view pearson (Pearson VIEW - my profile.pdf) and my scores on tests for certification of OCP (1Z0 - 051.pdf, 1Z0 - 052.pdf, 1Z0 - 053.pdf).
If you need additional information just let me know and I'll give you.
Please acknowledge this information and give me the OCP certification (Oracle Database 11g Administrator Certified Professional).
Kind regards.
Italo Moises dos Santos.
Oracle ID: < deleted by the moderator test >
------------------------------------------------------------
I did this way, because the https://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP link has not worked, I sent my class even without knowing if it will be accepted, so I exchanged a few emails and my journey has been accepting.
-
How to remove the extra space of oracle database column
How to remove the extra space of oracle database column. I would like to clean up the column in the database by deleting the extra space is entered by the dataentery people.
When I run the query:
SELECT
ROWID, C.CODETABLE_ID, C.CODEVALUE_ID, C.DESCR, LENGTH (C.CODEVALUE_ID).
C.OBSOLETE_DT, C.RECORDSOURCE, C.CREATED_DT,
C.CREATEDBY, C.LASTUPDATED_DT, C.LASTUPDATEDBY
OF CODEVALUE C
Where LENGTH (C.CODEVALUE_ID) > 6
the data type is varchar2 and I would get rid of the any extra blank space added to the column. in my case, if the length is greater than 6Hello
user452051 wrote:
Thanks for the reply. Why should I have this line?AND codevlaue_id! = TRIM (codevalue_id) - see note below
;I just changed my post when you posted this. The explanation is there now:
Frank Kulash wrote:
...
The condition "codevlaue_id!" = TRIM (codevalue_id)"does not change the results of everything, but it can make the most effective statement if there are lines where codevalue_id is on 6 characters long, but contains no additional space. It will prevent the triggers from firing and redo the data generated. -
How to check that all the options enabled in Oracle Database EE
Hello
I'm new on OTN.
How to check that all the options enabled in Oracle Database EE?
Thank you
VincentHello
Select decode(detected_usages,0,2,1) nop,
name, version, detected_usages, currently_used,
to_char(first_usage_date,'DD/mm/YYYY') first_usage_date,
to_char(last_usage_date,'DD/mm/YYYY') last_usage_date
of dba_feature_usage_statistics
order by nop, 1, 2
Orv$ option view
Thank you
LaserSoft -
HI: I analyze the STATSPACK report: this is the "volume test" on our UAT server for most of entry or "bind variables". Our shared pool is well used in oracle. Recovery of Oracle logs is not configured properly on this server, as in "Top 5 events of waiting", there are 2 for Oder.
I need to know what other information may be digging from of 'waiting in the foreground events' & ' background waiting events ", and which can help us better understand, in combination of ' Top 5 wait event, that how did the server test /? It could be overwhelming. wait events, so appreciate useful diagnostic or analyses. Database is oracle 11.2.0.4 updated from 11.2.0.3 on IBM AIX 64-bit, level 6.x system power
STATSPACK report
DB Id Instance Inst Num Startup Time Release RAC database~~~~~~~~ ----------- ------------ -------- --------------- ----------- ---
700000XXX XXX 1 22 April 15 12:12 11.2.0.4.0 no.
Host name Platform CPU Cores Sockets (G) memory~~~~ ---------------- ---------------------- ----- ----- ------- ------------
dXXXX_XXX AIX-Based Systems (64-2 1 0 16.0)
Snapshot Id Snap Snap time Sessions Curs/Sess comment~~~~~~~~ ---------- ------------------ -------- --------- ------------------
BEGIN Snap: 5635 22 April 15 13:00:02 114 4.6
End Snap: 5636 22 April 15 14:00:01 128 8.8
Elapsed time: 59.98 (mins) Av law Sess: 0.6
DB time: 35,98 (mins) DB CPU: 19,43 (mins)
Cache sizes Begin End~~~~~~~~~~~ ---------- ----------
Cache buffer: block 2 064 M Std size: 8 K
Shared pool: 3 072 M Log Buffer: 13 632 K
Load profile per second per Transaction per Exec by call
~~~~~~~~~~~~ ------------------ ----------------- ----------- -----------
DB Time (s): 0.0 0.6 0.00 0.00
DB CPU: 0.0 0.3 0.00 0.00
Size: 458 720,6 8,755.7
Logical reads: 245,7 12 874,2
Block changes: 1 356.4 25.9
Physical reads: 6.6 0.1
Physical writings: 61.8 1.2
The user calls: 38.8 2 033,7
Analysis: 286,5 5.5
Hard analysis: 0.5 0.0
Treated W/A Mo: 1.7 0.0
Logons: 1.2 0.0
Runs: 801,1 15.3
Cancellations: 6.1 0.1
Operations: 52.4
Indicators of the instance~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer % Nowait: 100.00 do NoWait %: 100.00
Buffer % success: 99.98% W/A optimal, Exec: 100.00
Library success %: 99,77% soft Parse: 99.82
Run parse %: 64.24 latch hit %: 99.98
Analyze the CPU to analyze Elapsd %: 53.15% Non-Parse CPU: 98.03
Shared pool statistics Begin End------ ------
% Memory use: 10.50 12.79
% SQL with executions > 1: 69,98 78,37
% Memory for SQL w/exec > 1: 70.22 81,96
Top 5 timed events Avg % Total
~~~~~~~~~~~~~~~~~~ wait Call
Event waits time (s) (ms) time
----------------------------------------- ------------ ----------- ------ ------
CPU time 847 50.2
ENQ: TX - 4 480 97 434 25.8 line lock conflict
Log file sync 284 169 185 1 11.0
log file parallel write 299 537 164 1 9.7
log file sequential read 698 16 24 1.0
Host CPU (processors: 2 hearts: Sockets 1: 0)
~ ~ ~ Medium load
Begin End User System Idle WIO WCPU
------- ------- ------- ------- ------- ------- --------
1.16 1.84 19.28 14.51 66.21 1.20 82.01
Instance of CPU~~~~~~~~~~~~ % Time (seconds)
-------- --------------
Host: Time (s) Total: 7,193.8
Host: Availability of time processor (s): 2,430.7
% of time host is busy: 33.8
Instance: Time processor Total (s): 1,203.1
% Busy CPU used, for example: 49.5
Instance: Time of database total (s): 2,426.4
% DB time waiting for CPU (resp. resources): 0.0
Statistical memory Begin End~~~~~~~~~~~~~~~~~ ------------ ------------
Host Mem (MB): 16,384.0 16 384,0
Use of LMS (MB): 7,136.0 7 136,0
Use of PGA (Mo): 282.5 361.4
Host % Mem used for SGA + PGA: 45.3 45.8
Foreground wait events DB/Inst: XXXXXs Snaps: 5635-5636
-> Only events with wait times Total (s) > =.001 are indicated
--> sorted by Total desc waiting time, waits desc (idle last events)
AVG % Total% Tim Total wait Wait Wait call
Event is waiting for the time (s) (ms) /txn times
---------------------------- ------------ ---- ---------- ------ -------- ------
ENQ: TX - line lock 4 480 0 434 97 contentio 0,0 25.8
284 167 0 185 1 file synchronization log 1.5 11.0
File I/O 8 741 of disk 0 4 operations 0.0 0.2
direct path write 0 13 247 3 0.1 0.2
DB file sequential read 6 058 0 1 0.0 0.1
buffer busy waits 1 800 0 1 1 0,0.1
SQL * Net more data to the client 29 161 0 1 0.2 0.1
direct path read 7 696 0 1 0.0 0.0
db file scattered read 316 0 1 2 0,0.0
latch: shared pool 144 0 0 2 0,0.0
Initialization of 30 0 0 3 0,0.0 CSS
cursor: hand 10 0 0 9 0,0.0 S
lock row cache 41 0 0 2 0,0.0
latch: rank objects cache 19 0 0 3 0,0.0
log file switch (private 8 0 0 7 0,0.0 str
library cache: mutex X 28 0 0 2 0,0.0
latch: cache buffers chains 54 0 0 1 0,0.0
free lock 290 0 0 0.0 0.0
sequential control file read 1 568 0 0 0.0 0.0
switch logfile (4 0 0 6 0,0.0 control point
Live sync 8 0 0 3 0,0.0 road
latch: redo allocation 60 0 0 0 0.0.0
SQL * Net break/reset for 34 0 0 1 0,0.0 customer
latch: enqueue hash chains 45 0 0 0 0.0.0
latch: cache buffers lru chain 7 0 0 2 0,0.0
latch: allowance 5 0 0 1 0,0.0 session
latch: object queue header 6 0 0 1 0,0.0 o
Operation of metadata files ASM 30 0 0 0 0.0.0
latch: in memory of undo latch 15 0 0 0.0 0.0
latch: cancel the overall data 8 0 0 0 0.0.0
SQL * Net client message 6 362 536 0 278 225 44 33.7
jobq slave wait 7 270 100 3 635 500 0.0
SQL * Net more data to 7 976 0 15 2 0,0 clien
SQL * Net message to client 6 362 544 0 8 0 33.7
-------------------------------------------------------------
Context of the DB/Inst events waiting: XXXXXs clings: 5635-5636
-> Only events with wait times Total (s) > =.001 are indicated
--> sorted by Total desc waiting time, waits desc (idle last events)
AVG % Total
% Tim Total wait Wait Wait call
Event is waiting for the time (s) (ms) /txn times
---------------------------- ------------ ---- ---------- ------ -------- ------
log file parallel write 299 537 0 164 1 1.6 9.7
log file sequential read 698 0 16 24 0.0 1.0
db file parallel write 9 556 0 13 1 0,1.8
146 0 10 70 0,0.6 startup operating system thread
control file parallel write 2 037 0 2 1 0,0.1
Newspaper archive e/s 35 0 1 30 0,0.1
LGWR wait for redo copy 2 447 0 0 0.0 0.0
async file IO DB present 9 556 0 0 0.1 0.0
DB file sequential read 145 0 0 2 0,0.0
File I/O disk 349 0 operations 0 0.0 0.0
db file scattered read 30 0 0 4 0,0.0
sequential control file read 5 837 0 0 0.0 0.0
ADR block lu file 19 0 0 4 0,0.0
Block ADR file write 5 0 0 15 0,0.0
direct path write 14 0 0 2 0,0.0
direct path read 3 0 0 7 0,0.0
latch: shared pool 3 0 0 6 0,0.0
single log file write 56 0 0 0.0 0.0
latch: redo allocation 53 0 0 0 0.0.0
latch: 1 0 0 3 0,0.0 active service list
free latch 11 0 0 0 0.0.0
CPI of RDBMS 5 314 523 57 189 182 1.7 message
Space Manager: slave wa slowed 4 086 88 18 996 4649 0.0
DIAG idle wait 7 185 100 1000 7 186 0.0
Streams AQ: waiting time 2 50 4 909 # 0,0
Streams AQ: qmn slowed slave 129 0 3 612 28002 0.0 w
Streams AQ: Coordinator of the 258 50 3 612 14001 0,0 qmn
SMON timer 2 43 3 605 83839 0.0
PMON timer 99 1 199 2999 3 596 0.0
SQL * Net client message 17 019 0 31 2 0.1
SQL * Net message to client 12 762 0 0 0.1 0
class slaves wait 28 0 0 0 0.0
Thank you very much!
Hello
I think that your CPU is overloaded by your stress tests. You have one VCPU with 2 wires (2 LCPU), right? And the load average is greater than one. You have time DB which is not counted in (CPU time + wait events) and which comes no doubt from time spent in the runqueue.
> Oracle recovery logs is not properly configured on this server, as in "Top 5 events of waiting", there are 2 for oder
It is an error in statspack for show "log file parallel write here." This moment is historical and is included in 'log file sync '. And I don't think you have to redo misconfiguration. Waiting for 1ms to commit is ok. In OLTP you should have more than one validation in a user interaction so that the user don't worry not about 1 m in batch mode, unless you commit to each row, 1 DC to commit should not increase the total execution time.
The fact that you have a lot of line lock (enq: TX - line lock conflict) but very little time (on average 97 ms) is probably a sign that testers are running simultaneously a charge affecting the same data. Their set of test data is perhaps too simple and short. An example: when stress tests of an order entry system if you run 1000 concurrent sessions, ordering the same product to the same customer, you can get this kind of symptoms, but the test we unrealistic.
It's a high activity of 2000 calls per second, 52 transactions per second, user. But you also have low average active sessions, so the report probably covers a period of non-uniform activity, which makes the averages without meaning.
So note to tell about the events of waiting here. But we don't have any info about 39% of DB time devoted to the CPU which is where something can be improved.
Kind regards
Franck.
-
The customer need to oracle database in the installation of the EPM FDM
Hi all
I want to install EPM11.1.2.2 products and on one server I install FDM. I checked the condition sine qua non of the installation of FDM and according to the guidelines of this customer database Oracle 32-bit and 64-bit client is necessary.
Server is Windows 2008 64 bit and already Oracle database 11g is installed.
I have reg queries following it.
1. If the Oracle database is installed on the same server, do I need to install both clients of the database as well?
2. If so, I am trying to install oracle database 32-bit client but the screen is endangered shows no newspaper or mistake, but at the same time 64-bit client is installing successfully?
3. I have not installed ODAC, what is the significance of this facility, and what I need to install the same?
Help, please.
Thank you
Hi all
Got the solution to the problem of the 32-bit client installation on the same machine where oracle 64-bit database or oracle customer base 64 is already installed.
I took knowledge oracle support 1292785.1 document IDs and found the solution.
Thank you for all your help.
-
Problem with the date when you load the XML file into Oracle Database 10g
Hi all
I have the interface as shown in the screenshot below. In this document, among other things, I am mapping to an element XML file representing a date to an Oracle table column defined as DATE. The source and target columns are highlighted in the screenshot.
! http://img223.imageshack.us/img223/1565/odiscr275.jpg!
When I run the interface, I get the following error message:
java.lang.IllegalArgumentException to java.sql.Date.valueOf(Date.java:103)
I guess that this is the conversion of the date!
I already tried to replace SRC_TRADES. DEAL_DATE with TO_DATE (SRC_TRADES. DEAL_DATE, ' DD/MM/YYYY') on the implementation tab. This feature was not recognized when I executed the interface, so it did not work! The value of date in the XML file is in the format DD/MM/YYYY .
I guess that Date SQL Oracle functions do not work in the implementation tab. Could someone let me know:
1. what the Date Conversion function I could use instead?
2. where can I find a reference to the methods/functions that I use in the implementation tab (if such a reference exists)?
See you soon.
JamesHello.
Try changing the area of execution at the staging area. Once you change it, write in the map box just SRC_TRADERS. DEAL_DATE. When you use TO_DATE, the source field typu should be varchar2, no date (as it is in store for your data source)
-
Hello
I am not able to connect to the Oracle SQL developer database. I said / 0 error: the network adapter could not establish the connection.
I started the listener, but what I see is, it points to a different IP address instead of the IP address of the host. How to change the name of host or IP address.
I see that it points to the host name in listener.ora.
Attached the screenshot
Can someone help me solve this problem?
Thanks in advance
What he says is the listener.ora file is not necessary to start the listener. If you rename, then start the receiver, then start the db, after a minute or two, the db should automatically register with the listener and then you can make a tnsping or otherwise connect to the database through the listener.
I'm not entirely sure what's going on with your image, but I can't help but wonder if somehow something is not what you expect with the investigation period, whenever it starts.
So use lsnrctl status lsnrctl services to see what the listener is the situation and tnsping and ping from the client to see what he thinks.
-
Question about the ADF Version supported Oracle database
Hello
One of my client's situation trigger this thread, they have a few Oracle 9.2.0.6 inherited instance, which turns out to be that a version of database not supported for JDeveloper/ADF 12.1.3, in this case, supports an earlier version of the ADF is the only choice without upgrading of database to 11.x for them?
And I'm also interested to know why JDeveloper/ADF confined its support to some version of database Oracle, thank you
-Liang Yi
Hello
If I'm not wrong then the Oracle 9i database is out of support since juil.-2007. JDeveloper and ADF certifies and supports the unsupported database versions or operating systems. So I hope that answers the "why". The real solution is to upgrade the database, because that's the reason that will block you for what your client is to move forward.
Frank
-
Read an existing model (12 c + with the option of triple oracle database)
I've seen a few examples of code, all use the class 'oracle.spatial.rdf.client.jena.ModelOracleSem.createOracleSemModel (oracle, string);", which creates an RDF model, but I have already created using SQLplus and I want to do a simple READ. Is it possible to do?
NB: my trip was this, I realized this tutorial (everything works fine), but now I want to reproduce CRUD queries on the model of the family (which is extracted from the Oracle documentation) using JAVA, the Jena API.
Code:
OracleThin. createOracleSemModel (oracleThin.getOracle (), modelName);
}
Hello
I'm trying to understand your question. If you have four models and I assume that you want to run a SPARQL query against the union of the four models, right? If that's your goal, you can do something like:
String [] modelNames = new String() {"datebaseeva", "datebaselocalebackup", "datebaseMesuresMains"}; String [] rulebases = new String [] {}; Piece attached attachment = Attachment.createInstance (modelNames, rulebases, InferenceMaintenanceMode.NO_UPDATE, QueryOptions.ALLOW_QUERY_INVALID_AND_DUP); //
The following allows us to reach EVA, LOCALEBACKUP, MESURESMAINS for model of REGIONAL settings
//
Chart GraphOracleSem = new GraphOracleSem (oracle, "datebaselocale", room attached, true); Dim queryString As String =
"PREFIX ORACLE_SEM_FS_NS: http://oracle.com/semtech#allow_dup=t>"+ ___PUT_YOUR_QUERY_HERE___; "
ModelOracleSem m = new ModelOracleSem (graph); Query query = QueryFactory.create (queryString);
Now, the following query will be executed on the 4 models.
QueryExecution qe = QueryExecutionFactory.create (query, m);
It will be useful,
Zhe Wu
-
two ways to get the freespace in an oracle database show different values
Hello
I tried to get the freespace in a tablespace with different methods.
R: first method
1 Select tablespace_name, sum (bytes) /(1024*1024) MB dba_data_files group by tablespace_name; # to get the totalspace (divided) of storage space
TBS1 13312 MB
2. Select tablespace_name, sum (bytes) /(1024*1024) dba_segments MB group by tablespace_name; # to get used space in the tablespace
TBS1 13231,625 MB
3. calculate the free space: totalspace - used space = free space
13312 - 13231.625 = 80,375 MB of space in the tablespace TBS1
B: second method
1. Select tablespace_name, sum (bytes) /(1024*1024) MB dba_free_space group by tablespace_name; # to get the free space in the tablespace
TBS1 3888,25 MB
where is my mistake?
which is correct?
best regards george
It can help u
http://kpkarthickumardba.blogspot.in/2011/12/size-difference-dbasegments-vs.html
-
How can I determine the license information in Oracle database Ent.Ed.
I am new to Oracle. I need determine the license information. I would like to know:
(i) how to find the Oracle license if it is based on the processor or the user after installation
(II) how to check the system the number of CPUS under license after installation
(III) how to check the system the number of Oracle users under license after installation
All versions are enterprise Oracle (9i, 10g, 11g)You look at the documents you've got Oracle when you purchased your licenses.
Database software itself has no idea that you were using the OTN license you accepted when you downloaded the software from OTN, a CPU license you bought at Oracle yesterday, or some old license purchased from Oracle a decade using a metric that sell you even more with Oracle (for example, former competitor licences that are still floating around).
Justin
-
To connect remotely to the GR 11, 2 Oracle database
Hello world
I'm a beginner who aims to become a DBA. With no prior experience in the administration of the database, I suspect some of my questions will be stupid enough, but once learned, it is learned for good, so please be gentle :)
After you install Oracle Linux 6 version 3 and database Oracle 11 GR 2 on a dedicated machine, I downloaded Navicat for Oracle (trial) and tried to connect to the database remotely. So far I've succumbed.
The listener is in PLACE and I can connect to https://localhost:1158 / em very well. Address Net Listener is configured as follows:
(ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1521))
I have a hunch that "localhost" might not be sufficient to allow remote connections, but some documentation I read was a little confused. I also tried adding another auditor who would use 'HOST' entry as the DNS name of the complete machine but which seemed to spoil 'EM completely.
On the error message: whenever I try to connect, I get "ORA-12541: TNS:no listener. But, as I said, the listener is in PLACE.EduardB wrote:
[oracle@eburlacu-server ~] $ env | Sorting
_ = / bin/env
CVS_RSH = ssh
G_BROKEN_FILENAMES = 1
HISTCONTROL = ignoredups
HISTSIZE = 1000
HOME = / home/oracle
Host name = eburlacu - server.ro.oracle.com
KDEDIRS = / usr
KDE_IS_PRELINKED = 1
LANG is en_US. UTF-8
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME = oracleMAIL = / var/spool/mail/oracle
ORACLE_HOME=/OracleDB/product/11.2.0/dbhome_1
PATH=/usr/lib64/Qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/Home/Oracle/bin
PWD = / home/oracle
QTDIR=/usr/lib64/Qt-3.3
QTINC=/usr/lib64/Qt-3.3/include
QTLIB=/usr/lib64/Qt-3.3/lib
SELINUX_LEVEL_REQUESTED =
SELINUX_ROLE_REQUESTED =
SELINUX_USE_CURRENT_RANGE =
SHELL = / bin/bash
SHLVL = 1
SSH_ASKPASS = / usr/libexec/openssh/gnome-ssh-askpass
SSH_CLIENT = 10.171.84.190 57486 22
$SSH_CONNECTION = 10.171.84.190 57486 10.171.80.239 22
SSH_TTY = / dev/pts/2
TERM = xterm
USER = oracle(LS_COLORS apparently contains unauthorized content)
Published by: EduardB on August 3, 2012 13:06
question OS commands below
export ORACLE_SID = eburlacu
export ORACLE_BASE = / oracledb
export PATH = $ORACLE_HOME/bin: $PATH
lsnrctl status
lsnrctl serviceCOPY orders & results then PASTE all come back here
-
Configuration of DNS for the ANALYSIS used with Oracle Database 11g Release 2 RAC
Hi gurus,
I am on how to install oracle RAC 11 g 2, ANALYSIS required for installation, but I do not know how to configure the SCAN with DNS. Have a guide/note/document setup to install DNS configuration for ANALYSIS, can help me to overcome installation CARS with SCAN (single Client access name)
Please don't bother me on my English terible
So thank you
ChThere are a lot of useful documents on the net:
http://www.Oracle.com/technetwork/database/clustering/overview/scan-129069.PDF
http://wiki.Oracle.com/page/Oracle+RAC11g+R2+single+client+access+name-+scan
http://www.garrettseibt.com/database/?p=208
Best regards
Gokhan Atil
-------------------------------------------------------
If you answer this question, please mark appropriate as correct/useful messages and the thread as closed. Thank you -
Installation of the UCR switches from Oracle database 11g
UCR-6083: impossible - check requirement prerequisites for the selected item: SOAINFRA
Refer to the journal of the RCUS to D:\SOA1114\rcuHome\rcu\log\logdir.2011-04-05_12-12\rcu.log for more details.
RCU - 6107:DB prerequisites for Init Param failed: process
Current value is 40. It must be greater than or equal to 200.
RCU - 6092:Component validation selection failed. Please refer to connect to D:\SOA1114\rcuHome\rcu\log\logdir.2011-04-05_12-12\rcu.log for more details.
during the selection of the components, I selected soa infrastructure and I continued. but she stopped when checking for prerequisites.
pls find my file rcu.log as below.
--------------------------------------------------------------------------------------------------------------------
2011-04-05 12:12:11.694 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: dir Log is not exist. Creation logdir:D:\SOA1114\rcuHome\/rcu/log\logdir.2011-04-05_12-12
2011-04-05 12:12:11.704 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: Log file does not exist. Creation of journal file:D:\SOA1114\rcuHome\/rcu/log\logdir.2011-04-05_12-12\rcu.log
2011-04-05 12:12:11.704 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: LOG_LEVEL_IS - NOTIFICATION: 1
2011-04-05 12:12:11.704 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: hostname: PC161826
2011-04-05 12:12:11.704 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: OSINFO: x 86 Windows 7 6.1
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: JREINFO: 1.6.0_21 D:\SOA1114\rcuHome\jdk\jre
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: username: 249141
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: USERDIR: D:\SOA1114\rcuHome\BIN
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: user country: U.S.
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: the user's language: en
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: Java class path: D:\SOA1114\rcuHome\\jlib\rcu.jar;D:\SOA1114\rcuHome\\jlib\share.jar;D:\SOA1114\rcuHome\\jlib\help-share.jar;D:\SOA1114\rcuHome\\jlib\ohj.jar;D:\SOA1114\rcuHome\\jlib\orai18n-mapping.jar;D:\SOA1114\rcuHome\\lib\xmlparserv2.jar;D:\SOA1114\rcuHome\\jdbc\lib\ojdbc5.jar;D:\SOA1114\rcuHome\\jdbc\lib\ojdbc14.jar;D:\SOA1114\rcuHome\\jlib\jewt4.jar;D:\SOA1114\rcuHome\\jlib\ojdl.jar;D:\SOA1114\rcuHome\\modules\oracle.odl_11.1.1\ojdl.jar;D:\SOA1114\rcuHome\\jlib\SchemaVersion.jar;D:\SOA1114\rcuHome\\jlib\wldb2.jar;D:\SOA1114\rcuHome\\jlib\wlsqlserver.jar;D:\SOA1114\rcuHome\\jlib\wlbase.jar;D:\SOA1114\rcuHome\\jlib\wlutil.jar;D:\SOA1114\rcuHome\\ jlib\fmwgenerictoken.jar;D:\SOA1114\rcuHome\\jlib\com.bea.core.weblogic.workmanager_1.9.0.0.jar;D:\SOA1114\rcuHome\\jlib\oracle_ice.jar;D:\SOA1114\rcuHome\\jlib\rcuhelppages.jar;D:\SOA1114\rcuHome\\assistants\opca\jlib\opca.jar;D:\SOA1114\rcuHome\\portal\jlib\ptlshare.jar;D:\SOA1114\rcuHome\\jlib\ldapjclnt11.jar;D:\SOA1114\rcuHome\\jlib\commons-collections-3.1.jar;D:\SOA1114\rcuHome\\jlib\commons-dbcp-1.2.1.jar;D:\SOA1114\rcuHome\\jlib\commons-logging.jar;D:\SOA1114\rcuHome\\jlib\commons-pool-1.2.jar;D:\SOA1114\rcuHome\\jlib\quartz-1.6.0.jar;D:\SOA1114\rcuHome\\jlib\xml.jar;D:\SOA1114\rcuHome\\jlib\jta.jar;D:\SOA1114\rcuHome\\jlib\iam-platform-utils.jar;D:\SOA1114\rcuHome\\jlib\iam-platform-authz-service.jar;D:\SOA1114\rcuHome\\jlib\iam-features-identity.zip;D:\SOA1114\rcuHome\\jlib\ iam-features-configservice.zip;D:\SOA1114\rcuHome\\jlib\jps-api.jar;D:\SOA1114\rcuHome\\jlib\jps-common.jar;D:\SOA1114\rcuHome\\jlib\jps-ee.jar;D:\SOA1114\rcuHome\\jlib\jps-internal.jar;D:\SOA1114\rcuHome\\jlib\jps-manifest.jar;D:\SOA1114\rcuHome\\jlib\MicroSM.jar;D:\SOA1114\rcuHome\\jlib\javax.persistence_1.0.0.0_1-0-2.jar;D:\SOA1114\rcuHome\\jlib\org.eclipse.persistence_1.0.0.0_1-1-0.jar;D:\SOA1114\rcuHome\\jlib\identitystore.jar;D:\SOA1114\rcuHome\\jlib\jps-unsupported-api.jar;D:\SOA1114\rcuHome\\jlib\pd-internal.jar
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.common.util.LoggingManager::initialize: Java library path: D:\SOA1114\rcuHome\jdk\jre\bin; ; C:\Windows\Sun\Java\bin; C:\Windows\System32; C:\Windows;D:\SOA1114\rcuHome\\bin; C:\oraclexe\app\oracle\product\10.2.0\server\bin; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.rcu.Rcu::execute: launch RCU.
2011-04-05 12:12:11.714 NOTIFICATION rcu: oracle.sysman.assistants.rcu.Rcu::execute: InteractiveRCUModel of creation
2011-04-05 12:12:12.224 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager: < init >: rather than DTD: D:\SOA1114\rcuHome\/rcu/config/
2011-04-05 12:12:12.224 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager: < init >: ComponentInfo xml location: D:\SOA1114\rcuHome\/rcu/config/ComponentInfo.xml
2011-04-05 12:12:12.224 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager: < init >: xml storage location: D:\SOA1114\rcuHome\/rcu/config/Storage.xml
2011-04-05 12:12:12.224 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager: < init >: DTD Validation: true
2011-04-05 12:12:12.234 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUCommandLineParser::process: processing command line...
2011-04-05 12:12:57.107 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: SYSDBA, connectString: (description = (address = (host = localhost)(protocol=tcp) (port = 1521)) (connect_data = (service_name = XE) (server = dedicated)))
\rcuHome\/RCU/integration//EPM/registry/RepositoryConfig.XML is valid
2011-04-05 12:12:58.267 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.xmldata.RepositoryConfigManager::parseStorageData: XML Document: D:\SOA1114\rcuHome\/rcu/config/Storage.xml is valid
2011-04-05 12:12:58.467 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: turnaround time for initialization of configuration metadata repository: 640 milliseconds
2011-04-05 12:12:58.467 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: execution of task: get the properties of the specified database
2011-04-05 12:12:58.467 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = PREREQ_QUERY_DATABASE
2011-04-05 12:12:58.517 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: lead time to get the properties of the specified database: 50 milliseconds
2011-04-05 12:12:58.517 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: execution of task: obligation of verification for the specified database
2011-04-05 12:12:58.517 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = PREREQ_GLOBAL_CHECK
2011-04-05 12:12:59.967 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: lead time for the requirement of verification for the specified database: 1450 milliseconds
2011-04-05 12:12:59.967 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: task execution: run before create operations
2011-04-05 12:12:59.967 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.CustomCompManager::getActionList: CustomCompManager.getActionList: CUSTOM_COMP_PRELOAD_SETUP
2011-04-05 12:12:59.977 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.AbstractCompTask::execute: ValidationRule result was false. Jump action: oracle.ias.version.SchemaVersionUtil:utilCreateRegistryAndCopyData
2011-04-05 12:12:59.977 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.AbstractCompTask::execute: ValidationRule result was false. Jump action: oracle.ias.version.SchemaVersionUtil:utilCreateRegistryTable
2011-04-05 12:12:59.977 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: lead time to run before the operations of creation: 10 milliseconds
2011-04-05 12:14:15.656 NOTIFICATION rcu: oracle.sysman.assistants.common.task.ProgressPanel::progressToNextTask: waiting for delegate be visible
2011-04-05 12:14:15.666 NOTIFICATION rcu: oracle.sysman.assistants.common.task.ProgressPanel::progressToNextTask: waiting for delegate be visible
2011-04-05 12:14:15.676 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: execution of task: Metadata Services
2011-04-05 12:14:15.676 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = MDS
2011-04-05 12:14:15.676 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: from prereq check component
2011-04-05 12:14:15.706 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: turnaround time for metadata Services: 30 milliseconds
2011-04-05 12:14:15.706 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: execution of task: SOA Infrastructure
2011-04-05 12:14:15.706 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: Prereq taskId = SOAINFRA
2011-04-05 12:14:15.706 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator::executePrereqTask: from prereq check component
2011-04-05 12:14:15.706 rcu ERROR: oracle.sysman.assistants.rcu.backend.task.PrereqTask::execute: Prereq evaluation failed
Refer to the journal of the RCUS to D:\SOA1114\rcuHome\rcu\log\logdir.2011-04-05_12-12\rcu.log for more details.
at oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator.executePrereqTask(PrereqEvaluator.java:642)
at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:68)
at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
at java.lang.Thread.run(Thread.java:619)
2011-04-05 12:14:31.806 rcu ERROR: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: UCR failed
oracle.sysman.assistants.common.task.TaskExecutionException: UCR-6083: impossible - check requirement prerequisites for the selected item: SOAINFRA
Refer to the journal of the RCUS to D:\SOA1114\rcuHome\rcu\log\logdir.2011-04-05_12-12\rcu.log for more details.
RCU - 6107:DB prerequisites for Init Param failed: process
Current value is 40. It must be greater than or equal to 200.
at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:76)
at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)
at java.lang.Thread.run(Thread.java:619)RCU - 6107:DB prerequisites for Init Param failed: process
Current value is 40. It must be greater than or equal to 200.Please increase the DB process parameter properly. Please see-
http://www.Oracle.com/technetwork/middleware/soasuite/overview/quickstartguidesoasuite11gr1ps3-313245.PDF
Run under SQL before starting the RCU-
SQL > alter system reset sessions scope = spfile sid ='* ';
SQL > change processes control system = 300 scope = spfile;
SQL > shutdown immediate
SQL > startupKind regards
AnujPublished by: Anuj Dwivedi on April 5, 2011 13:24
Maybe you are looking for
-
After upgrade to Windows 7 - printer is installed, but nothing prints
I see some posts with people who say that their printer is installed, but when they try and printing is queued for the print spooler and then disappears, or they say they can print a test page for the HP software but nothing prints. Most of these peo
-
A30-514 - fan on permanently!
I have a 12 month A30-514 - fan is on continuously, making lots of noise, while the system is clearly not overheating. Any ideas?
-
Vista software: don't have a disc on purchase
Hi all I have a desktop computer: Pavilion model a6001.uk (about 6 years). I don't remember getting the Windows drive on purchase. It came with Vista Home Basic Edition is installed. I've upgraded to Windows 7 a few months ago. My PC is so SLOW (!).
-
WMP shows is not the files on my rocket I just synced
ARGH! I'm at my wit's end! I just synced my files on my card of 4 GB with WMP 11, in the car, select mode (I know, I know that everyone says not to do, but it worked until last night!). When I went to check on the unit this morning, it says no file
-
Floating elements right of a menu at the top of the page
Hi guys,.I'm working on a new application that uses the universal theme with top navigation menu and I wish I had a text field and a button will appear to the right, but I guess I need a little help to get there. So you can see my progress, I created