The recorded sound volume is very low

Similar Questions

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?

  My computer microphone picks up sound at a very low volume. It is impossible to chat with no sound coming from my side! How should I do?

  Buy a micro better use - one with noise suppression.  Sounds like inexpensive material.

• the windows of the cc of photoshop is very low in 4 k monitor

  I bought a new Lenovo laptop with 4K monitor, then I install photoshop cc, but the windows and the police is very small and it is difficult to see.

  the windows of the cc of photoshop is very low in 4 k monitor

  How can I solve this problem?

  my device is: Lenovo 20378

  Hi hussain alhaiky,.

  Greetings.

  Open PS, click edit - preferences - interface and change the UI scale to 200%

  Click ok, and then restart Photoshop.

  Concerning

  Rohit

• Volume of the voice channel Windows 7 very low, all levels of thin volume.

  Hello

  I have problems with a recent installation of Windows 7 Ultimate 32 bit.

  Problem:
  All the sounds of voice work, but they have a very low volume. I tend to have to reduce all the other audio almost minimum, then come out the volume of the voice, the speaker volume and mixer Volume volume even hear max.

  This is true in games, both running in and out of the compatibility mode. This also applies to Windows Media Player videos and games in the browser and video in Firefox. It's even true in the unit.

  Tried solutions:
  On other forums, similar problems of some other people:
  -a suggested that I have turn off the cancellation of the vote under Kaeroke in sound effect Manager, it is already disabled.
  -a suggested that I put CP > Sound > Communications tab > in the 'status quo', no effect.
  -tried reinstalling the drivers, once again, no effect.
  -A forum suggested to another with the same question that he installed 64-bit windows 7, is not viable as 64-bit installs (despite the fact that I'm on Ubuntu 64-bit.)

  History:
  Previously, in windows XP SP3 it worked well, as it does now on Ubuntu 9.04 (Dual Boot)
  The change seems to have occurred at the same time that the installation of Windows 7.

  System:
  OS: Windows 7 build 7800 Ultimate.
  DirectX: 9.0
  Audio driver: Realtek AC 97 Audio (R) to Audio VIA controller. Version 6.0.1.6305 (current version)

  Please let me know if you need additional information or have any suggestions on how to solve this problem, it is quite frustrating.

  Thank you for your time.

  There has been no updated drivers since, however... I don't know how it works, but somehow update on the side of my computer of 9.04 ubuntu 9.10 seems to have fixed...

  No idea how it worked, I have made no other changes to system register windows virus definition facilities.

  Weird.

  Anyway,.
  Thank you for your time.

• After upgrading to iOS 9.3.2,and volume is very low when the reception or appeal of the mine

  After the upgrade to iOS 9.3.2,and I hear very low volume everything without or receive calls. Either side can hear properly

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• My laptop volume is very low, even with the maximum setting. It also has a very annoying echo

  I tried every setting available on this laptop, go all together if not try several changes in all settings. The volume is still low and has a very annoying reverberation and echo effect, even with these settings turned off. I got it for a week, and I was very happy with any other accept the audio. The reasons for buying this model were media processing and so far I have and become more disgusted daily with her. It is a Pavilion dv6 and it has beat audio software. If anyone has a solution, it would be much appreciated.

  Hello

  One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers and headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• The Bluetooth media suddenly got very low volume

  I was happily listening to Pandora via bluetooth for months, when all of a sudden about two weeks ago, the volume got so low I can barely hear it.  I checked the media volume control and it is bent full.  Bluetooth phone call volume still works fine and is generally of fort to operate in full.  I tried deleting and reinstalling Pandora, but no help.  I also tried another internet radio app (Slacker), but he also plays very low volume.  The only changes that I know are updates frequent free app I install I'm warned.

  Does anyone else have a problem like this?  Should I try a hard reset?

  Thank you

  Galán (Droid, 2.1 - update1)

  I did and I had to wipe my phone bluetooth devices and reboot then re add devices.  This took care of it.

• Satellite A200 - 14 d - the internal microphone volume is too low

  Hello, I installed the latest version of bios and drivers, but the problem with the internal mic has not changed: the volume is too low (levels the MAX value)-> unusable.

  And when the AC is plugged in, a heavy background noise appears in the hip or trendy helmet speakers.
  In addition, in the mic plugged in too... :(

  Hello

  I found similar topic where the user called Andrej wrote:

  Try this please:
  1. the right of the mouse, click on its icon in the task bar choose sound option
  2. change in the recording tab
  3. mark the front mic and click Properties
  4. change in the last tab named advanced
  5. in exclusive mode, uncheck the box first one

  Please test now and give me some feedback.

• iPhone 6 ear problem the noise I hear is very low

  MY mobile is iPhone 6 128 GB wi

  I have a problem with the ear sound I hear is very low and I can't control from the bottom side

• The microphone volume is very low on a Dell inspiron 13 7348 with Windows 10

  On my new Dell inspiron 13 7348 the microphone volume so low that my Skype partners can barely hear me. I checked all the settings in Skype and software audio dell and I updated all drivers... without success

  Connect a microphone extermal solves the problem, however, I prefer to not always have an additional microphone with me!

  Has anyone found a way to increase the volume of the microphone?

  Since an external device works well I'm afraid that the build-in microphone is actually of minor quality... what a disappointment

  So far, nothing has changed. I continue to go all my encounters with my laptop and this webcam with microphone build - in which I used the last in 2005... It's ridiculous... Don't know how many times I have had to explain to my colleagues why I use this external microphone... BTW, their Skype works well on non Dell computers with Windows 10 so I guess it's a problem that only affects users of Dell...

  As I said before, it's a big disappointment, and in the future I will avoid Dell products.

• Satellite L500 sound quality is very low

  Bought sucessfully above and upgraded to Windows 7 to XP.
  However, the sound is terrible - hail.

  This is applicable to the CD, DVD, and especially when you listen to audio books and it is impossible to listen to the radio. Have tried to change the settings of the speakers Realtek High Def, but no difference.
  Test of Windows 'sounds' are very good and the sound from two speakers.

  Having a Statellite about 5 years old and sound is far superior.
  Not an expert and don't know where else to look to improve the quality.
  Can't believe that this is supposed to be like this.

  Thanks in advance for any help.

  Stand by.
  Your laptop is equipped with Win7 preinstalled (factory settings)?
  Have you noticed that on the first day or now after installing Win7?
  Have you tried to change the sound settings in the player you're using (compensator)?

  Compare with old notebook is not so relevant. I have 4 years old Satellite M70 with a sound and harman/kardon speakers is fabulous and much better and stronger than the newest Satellite A300.

• NB 100 with the XP - sound volume keys not working not

  My sound keys Fn + 1 or 2 have stopped working. The other function keys seem ok including mute sound. I tried restoring the system to track back with no success. Any ideas please?
  Cheers G

  Post edited by: grockel

  Hello

  I have no experience with this netbook but I ve checked all the drivers of Windows XP Home edition, and tools and what you can try is to reinstall the Toshiba Hotkey utility. On most notebooks of the common modules pre-installed WXP is available and this tool is important for the functionality of the FN keys, but it is not available for this netbook.

  Try again with the utility of keyboard shortcuts.

• All the fonts that come out very low quality

  Hey all,.

  I'm having a problem and I think that I may have inadvertently changed a setting in Pohotoshop CS3.  What happens is that when I'm dealing with images (width and height) 1000px or less, all my fonts go out in very poor quality, almost square.  I do not know what setting allows to set this, but it just started happening recently.  Here is a screenshot of an image 900px wide of text, 300pix /: http://imgur.com/TD864

  I would appreciate help.

  Check your anitaliasing, mine is set to high in this screenshot. You must switch to the type tool to access anti-aliasing.

  

• Demystify the ODI Security - Documentation is very low on this topic.

  I see 3 000 hits on a thread on safety of ODI, but I didn't this time "Ah-ha!" I realized security ODI. The SNPS_USERS. PDF (User Guide for the ODI) is very light on the Security section.
  
  I'm doing something I hope is very simple: create a new user who can run scenarios that I choose and only for certain contexts. I was able to create a new user. I was also able to apply a profile to the new user. But when I try to give specific SCENARIOS that I get this error:
  
  
  
  * "This user already has class privilege on this type of object. There is no need to define privileges of the instance. » *
  
  
  
  Does anyone have good examples on how to configure the security of ODI?
  
  
  
  -Chris Rothermel
  
  Published by: Chris Rothermel on April 12, 2010 14:40

  Chris,

  I agree that the security of ODI is poor and more like witchcraft.
  That said, see what Re: Security
  This can give you an overview of how work the class privileges and not generic

  Create a new user.

  For your case, do the following:
  1 create a duplicate of CONNECTION profile and name it CONNECT_WITHOUT_CONTEXT.
  2. expand it and goto context-> Dbl-Click on display.
  3. uncheck the "class Privilege".
  4 Grant CONNECT_WITHOUT_CONTEXT to the user.
  5 drag - move the contexts that you want the user to access in the topology on the User Manager.
  Now the user will be able to see the contexts that you grant him explicitly.

  6. in addition, for your case use designer NG instead of regular profile of the creator.
  7. the Execute method of the object of scenario under this profile has been disabled for "class Privilege".
  8. connection of the operator and drag-and - drop scenarios on the user.

  HTH