The screen backlight not working anymore on Satellite M

Similar Questions

• Satellite L300 - 1-5 - the screen does not work

  Recently, I encountered a problem with my laptop, the screen does not work.
  I tested my inverter of the screen and my backlight lamp to see that if that was the problem, but they both worked perfectly, I then tried the entire screen with the parts and that worked too. (I tried in my friends Toshiba Satellite L300 - 217)

  Then I looked around online and got told to try to connect my laptop to an external monitor, so I did and the screen didn't work there either. So now I'm stuck, I have tried everything even made sure all connections aren't loose etc but it still does not.

  Anyone know what the problem with my laptop?

  Thank you, Tom

  Hey Buddy,

  > connect my laptop to an external monitor, so I did and the screen didn't work there either.
  This means that the internal monitor is ok and the reason must be the graphics card or card mother herself.

  I guess for now, you get only a screen empty and nothing happens on your laptop?

  In this case, you should contact the closest service provider authorized in your country. Just get in touch with the guys and ask for help. They can check the cell phone and fix it! ;)

• How do synchronize you a phone if the screen does not work?

  How do synchronize you a phone if the screen does not work?

  Rstansbury wrote:

  How do synchronize you a phone if the screen does not work?

  You need solve the problem first otherwise you do not have.

• ease of access on the keyboard of the screen does not work?

  My easy access on the keyboard of the screen does not work. I have easy access to the centre and left click on the keyboard of the screen then nothing. I double click, then nothing. I'm using a head pointer and live the clicker. I can access the touch keyboard, but it doesn't have the function or alt etc. keys. Can I download the easy access on the keyboard of the screen and reinstall?

  Thanks for the reply. He started working now. Very strang. Well.

• After upgrading RAM, the screen does not work on Satellite L30 - 105

  Dial up on laptop and screen does not work. Have updated the memory to 2 GB.
  This can be the reason of the screen works not? Have tried rebooting the system, but it helps t n.

  Hello

  Can you please tell us which laptop model you have? Have you noticed the same problem until you do RAM upgrade?
  What's on the new RAM? Did you buy a compatible?

• Screen does not work on my Satellite L500

  My Satellite L500 screen does not work. I can connect the laptop to a monitor and use ok but the screen of the laptop remains blank.

  I did something to cause this?

  I don t think so.
  If you cannot switch back to the display of s for laptop using FN + F5 I m afraid there is a hardware problem.

  The problem with the display cable or show itself. Is the laptop must be disassembled and all this needs to be checked.
  You can contact Toshiba service nearest and ask for help.

• How to retrieve info from my i5c if the screen does not work and the warranty has expired?

  My iphone 5 c screen does not work and my warranty has expired there is 138days. I visited my carrier (AT & T) and contacted the Apple support.

  I want just the information of contact at least if nothing else my phone. What can I do?

  Have you tried to backup with iTunes on your computer?

  Are you also the timing or the iCloud backup device?

• Keys (Fn + F6 and F7) function to set the brightness of the screen does not work

  original title: Fn + F6 and F7 to adjust the brightness of the screen does not

  The function Fn + F6 or F7 has suddenly stopped working. It has been fine until now, but when I press on them now, nothing happens. I use a toshiba laptop with windows xp, can provide more information if necessary

  Thank you

  Hello

  1 have had any changes made to your computer before this problem?

  2. What is the number of the model of the computer?

  3. the other function keys work as should.

  Perform the steps mentioned below and check:

  Step 1:

  Check if the problem persists when the computer is in clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Make sure that you put the computer to Start Normal once you have finished by referring to step 7 in the article.

  Step 2:

  I suggest you perform the steps mentioned below and check if it helps:

  http://forums.Toshiba.com/T5/keyboards-touchpads/fn-key-not-working/TD-p/253131

  (Valid for all models of Toshiba laptops)

  If the problem persists I suggest you to contact Toshiba to get help:

  http://Toshiba.com/Tai/support.jsp

  Let us know if it helps.

• Satellite Pro U400 - sound of the wheel does not work anymore

  The wheel of sound control in my Satellite Pro U400 works not properly since last month.

  Now, I have to use the volume bar in Vista to adjust properly. When I try to lower the volume by turning the wheel, as I did before, he constantly increases the volume after reducing to a few percent. If I flip it is very very slow, sometimes it decreases the volume a little, but other times it increases. Also when I'm in a word processor, turn the wheel to the right input 'c' character ' on the screen.
  There is no problem when I try to increase the volume, it does its job.

  Do you think it is related to hardware or can it be a problem of driver or something. Is there a solution?

  Thank you

  Hello!

  In your case, I would setup a pilot of his most recent. Search on the Toshiba site and check:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I had this problem on another laptop Toshiba also and after reinstalling with the recovery disk the problem has been resolved. I also tried updating the drivers and so far, but without success.

  Good bye

• Satellite Pro L300 1AI LCD screen backlight not working not

  Hi all

  I have a Satellite Pro L300 1AI running Windows Vista the computer starts and works fine but the backlight on the screen doesn't seem to work.

  Y at - it none of the Vista settings that can affect this (other than the Fn key command on the keyboard and settings) in Control Panel? Strangely, it seems to have happened since I installed Skype but I don't see how this could possibly affect it.

  Any help is much appreciated...

  Hello

  What s wrong exactly? Brightness screen laptop s is too low?
  Everything you see on the screen as behind a thick fog?

  Well, usually the FL Inverter control the backlight of the screen and if the FL inverter starts to malfunction, so you would get the problem like this.

  There is no alternative to replace this inverter FL.
  It s a small part behind the frame of the screen I think that it s a job for a technician in ASP.

  Welcome them

• Replaced the cable. Now, the screen does not work. What could be?

  The cable coming out of the back of my monitor Apple Thunderbolt Display is fraying. I decided that rather than risk a short at a certain point, I preemptively replace the cable. On iFixit teardown photos, I decided to replace the cable coming out of the back of the screen myself instead of paying almost $200 to get an Apple service provider to do that here in Bangkok. Bought the cable on AliExpress for $12. It replaced. And... no dice. Screen has not come.

  My setup

  [MacBook Air]-[Thunderbolt Display]-[drive Thunderbolt]-[Cinema Display]

  with a key USB drive and Ethernet connected to the back of the Thunderbolt display

  Already tried this

  • First impressions were that the cable was defective. But then I noticed Ethernet came the USB has been mounted, Thunderbolt was mounted drive and after a reboot, the movie screen come also. Obviously, the cable has been working very well.
  • Second thought was that I'd neglected to plug some cables that connect the LCD to the main logic board. I checked. Seemed fine.
  • Third was maybe the serial number of the cable was somehow connected to the main logic board. So I put the old cable. Still no screen.
  • Tried to connect the screen with a Thunderbolt external cable, everything worked as well but still no image on the screen.
  • Tried more than 30 seconds and 3 hours disconnected as a "reset" of the screen. No change.
  • Restarted my laptop. No change.
  • Thunderbolt Display well plugged the drive and then into the MacBook, so change the sequence of the devices. No change.
  • Information reports under "Thunderbolt" the entire chain of devices, but under "Graphics/displays" system displays only the internal screen and Cinema Display.
  • Using the newly purchased cable as a Thunderbolt external cable works fine too.

  Question

  Does anyone have suggestions on what to try next?

  The logic card goes into a sort of locked mode when you replace the cable?

  Is there more than 3 flat cables connection + connection to the land between the Panel and main Board?

  Although there is no reason to think that this has been, how to test LCD screen still work given all these flat cable connectors?

  
  

  Note: There is no Apple here store.  Apple authorized service providers are without help. He suggested to replace the cable and the Panel at a cost that is almost the same as the purchase of a new screen.

  Some of the cables that connect the LCD to the main logic board, are very short. Careful lifting the LCD, because it will go away with strength cables once that raise you it more than 2 to 3 inches on the side of the camera module.

  The shorter cable of all is the LVDS cable. A short cable with gold plated connector. Although I have had reconnected the cable on the side of the logic board, I had wrongly assumed that the other end of the cable was stayed connected because all the band used on. Someone with experience of fixing these things said of his town for this cable to unravel by force and to be sure to check both ends of the cable. When I peeled back the tape, I found that he had indeed been disconnected. Reconnect, fiddling with the tiny workspace to get the logical side of Board of Directors of what properly fixed cable again and we were back in business.

  Apple authorized service providers here in Bangkok have quoted me $200 to replace the cable. I ordered the replacement cable Thunderbolt Display off AliExpress for $12.50. It was really simple to replace the cable, just to keep an eye on this darn LVDS cable opening to the top of the screen!

• The webcam does not work on my Satellite L50 - A - 1 6

  Hi, given that the webcam of my new Satellite L50 - A - 1 6 does not work (I tried with Skype) I want to update the driver but I can't find a specific in the list of drivers that can be downloaded. Could someone help me to find the right one?
  Thanks in advance
  Good bye

  In the past, that Toshiba gave driver webcam but for Win8 or Win8.1 this driver is not available more. Driver webcam is part of the operating system.

  Webcam is listed in (imaging devices) Device Manager?
  Since when did you notice this problem with the webcam?
  You can use video original application Win8.1?

• can I turn on my phone through the computer if the screen does not work

  that should I do if my screen turns off completely and my lock button does not work and it turns on but my siri still work? How should I do?

  Plug your phone charger, it should run. Then tell Siri what you want to do.

• The cutting tool not working anymore... :-(__It was my favorite thing...

  For some reason my Snipping Tool no longer works. I clicked and 10 or 20 seconds, and I get the error: the cutting tool does not work on your computer right now. Restart your computer, and then try again. If the problem persists, contact your system administrator.

  I did a scan of the disc, and the Tablet PC optional components meet. (Enabled).

  This is a dell computer that came preloaded, so I don't think that I can recreate the cutting tool of a disc. ALSO... mysteriously, my tool of Windows Live Mail has decided to not SEND email at the same time.

  I have chased google and hope you can help. It's me MISSING.

  Roxie 1117

  Suggestions:

  1. If it is possible: to do a system restore. Choose the date free snipping worked as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  2. start > Search box, type system32 (that's a Word) > Enter > system32-box right, superior search window type SnippingTool.exe (that's a word too).
  Don't you see that SnippingTool.exe appears?
  If so, click it or PIN to the Start Menu or the desktop (create shortcut).

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Mirroring of the screen does not work after upgrade to Lollipop

  My xperia Z2 screen mirror successful 4.4.4 Android with Samsung Smart TV.

  Now after Lollipop upgrade when I try mirroring the screen I get an error message "error of mirroring. The output device supports HDCP... »

  Yesterday, I found a new software update for my TV. I went from 2102, 2105 version.

  Now, it works fine. Thanks for the suggestions.