The screen lost icons (wireless network, sound, lock on and outside)

Similar Questions

• I have windows xp and that you can connect to the internet, but my wireless network icon is missing, what should I do?

  Just got a new router, now the icons for wireless internet are gone... What should I do to get back them?

  Hello MMniser,

  Try this:
  1. go in Control Panel - network connections has been classic or network connections and Internet - network connections has been category;
  2. right click on your wireless connection, which is connected and click Properties;
  3. check the option "Show icon in notification area when connected" and Ok.

  Good luck!

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The Qualcomm Atheros AR5BWB222 Wireless Network Adapter adapter has driver - or hardware problems

  It's for my laptop Acer Aspire V3 - 771G who has internet CONNECTION problems. I was able to connect fine until windows 8, now I can only connect using the hard line. I ran a bunch of updates, driver downloads and etc means for this model directly on the Acer website for the upgrade of windows 7 to 8 and I had no chance.  However, this message appears when I try to fix the problems of network adapter "the Qualcomm Atheros AR5BWB222 Wireless Network adapter adapt knows driver - or hardware-related problems".  Any help would be greatly appreciated.

  I FIXED IT ALL! :) Simply drag or type at the top right of your screen to open the SEARCH option. Research of Control Panel. Click MANAGE the DEVICES.  Now, you can either search for the driver who is broken or defective write his name uninstall, and then reinstall it from the web (recommended to go to page creator ex; atheros was mine so I have downloaded from them.)  If you have no W/LAN driver then go to your website of the laptop manufacturers and find the necessary driver for your model :) I HOPE THIS HAS HELPED!

• can I erase the disc without any wireless networks

  I have a time capsule which is my wireless router.  I have not used for time machine because he has older backups of Mac and does not place to save my current iMac.  I can erase the disc without any wireless networks?  I do Air Port utility?

  I can erase the disc without any wireless networks?

  Yes

  I do Air Port utility?

  Yes, see the procedure below

  • Open AirPort Utility
  • Click on the image of the Time Capsule
  • Click Edit in the window that appears
  • Click the disks at the top of the next window
  • Click on clear disk
  • Choose the Quick erase option
  • Click clear

  The procedure will take only a minute or two

• My wireless network card is disabled, and I don't know how to activate it.

  My wireless network card is disabled, and I don't know how to activate it. I have a laptop HP Pavilion Dv9000, which originally had Vista but I installed XP Professional on it. According to Wefi all I had to do is click Start and then click on connect to and right-click on wireless connection and click Activate. My problem is when I click on start... There is no connect to click the button. Anyone know where I can find my connect button?  Thank you!!

  Hello

  Try changing your preferences in the start menu.

  Click with the right button on the task bar > select Properties > start menu tab > and make sure that this Start Menu, menu classic start no is selected. Then check to connect to.

  Or, go to control panel > network connections. Find your wi - fi adapter and right click, select Enable.

• error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone please tell me how to proceed? __

  error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone tell me please how to do this?

  Hi vivasiousv,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  See the links in the Apple Web site and try the steps mentioned below.

  http://discussions.Apple.com/message.jspa?MessageID=6096760

  http://discussions.Apple.com/message.jspa?MessageID=8436848

  For additional support post your query in the Apple discussion.

  http://discussions.Apple.com/category.jspa?categoryID=150

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• tried to send emails using the fast-forward button now e-mail flashes on and outside

  tried to send emails using the fast-forward button now e-mail flashes on and outside

  Please disconnect from the Internet temporarily, if necessary, by disabling a Wi - Fi connection or unplug Ethernet cable, whichever is applicable.

  In the Mail menu bar, select

  ▹ Connection Doctor window

  Look for the email account (SMTP) out in the window that opens. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. We'll pick the one affected. Make a note of the settings. Click the sign to remove, and then click OK.

  Reconnect to the Internet and add the account back with the same settings.

• cable to the printer on a wireless network?

  Have a wireless network and put HP Laserjet P3010 on the network with a cable. Wired and wireless network printer.  All computers can print to the printer, but the internet connection is lost.  If the printer is off, the internet connection returns.  For some reason, I think that the 3010 must have reset password, but can't find it.  Ideas and can - this actually possible?  Thank you.

  The HP Laserjet P3010 is a commercial grade laserjet printer. LMSCRI, you will be able to find the best support options in the Laserjet business Forums.

  Nope its assistance.

• FOJ 8500 909 g will not fully install, not accessible from the computers in home wireless network

  I bought an Officejet Pro 8500 909 g which worked well on our home network for 18 months.  Desktop is 32-bit Windows 7 with a USB cable.  Two wireless devices are 64-bit Windows 7.  Printer suddenly has not recognized the cartridges and frozen with the message "problem with the ink cartridge.  Called HP (unassisted) and tech support of holders of the contract of service - without help.  They sent a refurbished (even) model which I can't install on USB or wireless connection completely.  Yesterday, I was able to print at least one 3 machines on the network (not every machine wireless).  Today, I can not print even the USB device.  5 days lost uninstall then reinstall the printer software, router, etc.  Connected wireless network.  Printer says it is on the wireless network.  HP Solution center is not accessible because the "printer is not completely installed. Help?

  Hi EWQuince,

  The information you have given it seems that the printer is not on the same network as the computer. If the printer was on the same network as the computer, the IP address would be 192.168.1 instead of 192.168.33. You must run the printer Wireless Setup Wizard and make sure that you connect it to a network, the computers are connected. Once you have the printer connected to the same network all your problems should be solved.

  To connect to the wireless network

   

• "Cannot connect to the network." When you enter the correct password for wireless network

  Hello

  I have the HP Photosmart C7200 all-in-One series.

  This seems relatively insignificant compared to some of the problems posted here, but nevertheless it is a problem.  I have a Verizon FiOS (Actiontec) router.  I am trying to connect to it wireless; the network key is using WPA authentication.  I followed all the instructions in the quick start guide.

  My printer detects my network and application authentication key.  I enter the correct key, the printer is trying to establish a connection, but after about 15 to 25 seconds, I get the error message, "cannot connect to the network.  I know that my key is correct; I connect to my router very well through several laptops, PDA, etc.  I have reset the settings network default manufacturer and tried without success.

  I don't know what kind of trouble shooting I'm supposed to do here.  The printer detects the router (albeit low signal strength) whenever I try to connect, I enter the password each time and I get the error each time.

  Your help is greatly appreciated.

  Edit: I printed the test report wireless network, here are the results:

  Radio on   PASS

  The radio work   PASS

  Ethernet cable not plugged in   PASS

  Network name (SSID found)   PASS

  Security   PASS

  The printer settings compatible with the configuration of the wireless router   PASS

  No filtering   IN CASE OF FAILURE

  Connected   Not work

  The signal strength   Very low

  Other networks detected matching you the network name (SSID)   NO.

  I know this sounds strange, but try changing channel by channel 11 of the wireless router.

• Blue screen when using wireless network

  Hi, I had a problem with the wireless network.

  I use the laptop and when I turn it on, blue screen after a few seconds.

  Here is the info on my comp. (small old model)

  OS: Windows XP-84 x

  CPU: Pentium M

  Graphics: ATI Radeon 200M

  Network card: 802. 11b / g Wireless adapt (from Ralink Technology)

  This is the content of the blue screen (I SKIP a part which is NOT NECESSARY)

  A problem has been detected...

  Driver_IRQL_NOT_LESS_OR_EQUAL

  If this is the 1st time you have...

  Check that any new hardware...

  If problems continue, disable or remove...

  Technical information

  STOP: 0X000000D1 (0X696C8636, 0X00000002, 0X00000000, 0XAD8F7CD9)

  RT2500.sys - address AD8F7CD9 base at AD8E1000, DateStamp 42675c 99

  Beginning dump of...

  Physical d'Instruction dump...

  Contact your system administrator.

  It's very uncomfortable. I can't take the computer in a foreign place...

  Here's a page on the general bsod help.

  The DRIVER_IRQL_NOT_LESS_OR_EQUAL bug control has a value of 0x000000D1. This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  I suggest you goto, Ralink Technology site and download the latest version of network print driver. Even if you have not made it clear if that is indeed the network card or wireless adapter. Anyway I'll make sure update you both of them. I would also do that windows has all the latest updates.

• I got the error 0x8000FFFF: catastrophic error on windows XP pack 3 service. How can I fix this? I can do everything, but can not get the computer to detect wireless networks?

  I used disc cleanup and bang this error came. I don't know how or why. I can't use internet somehow. Normally, I connect to the internet with our home wi - fi connection. But my computer now sees not all networks wireless at all. I made sure the wireless switch is on and my son checked all settings network... still nothing. I am quite at a loss to solve this problem and do not have money to take right now to a pro. Help please?

  I also got the problem devices following system infor...

  Atheros AR5007EGwireless AVG mini port network adapter driver pnpdevice I\D ROOT/GR_AVGFWMP\0002 error code by using the V & D charger

  Atheros AR81 32PCI-E FastEthernet Controller AVG miniport driver ROOT\GR_AVGWMP | ooo1 failure using the V & D charger

  iecont.dll missing file

  iecontic.dll missing file

  ieuinit.inf not available

  Proxy disabled

  Disabled Access Manager

  Thanks a lot if you can help. The computer is a netbook with a screen 10 inch aspire. It's an older version, but is running windows xp with service pack 3, I use a laptop plus old to communicate with you and will continue to do so, to read your tips, thank you again.

  E-mail address is removed from the privacy *.

  Hello Sharon,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.
  Please post back and we do know.

• HOW THE AIRPORT TIME CAPSULE WIRELESS NETWORK IS PROTECTED?

  I implemented the airport Time Capsule, using a DSL modem connected to the internet as its bridge.  MacBook Pro was used for initial set up by the bolt of lightning to Ethernet connector and then disconnected and works perfectly.  Now, I would like to use Wi - Fi for my Samsung phone not iOS.  On the Samsung wireless I connect to my home network using a password.  Well, I don't think that a password was never set.  How can I configure my wifi at home to establish a password?   I don't think that the modem settings should enter in solving this for me, but I'll add that the modem required a static IP address be entered for this connection when its router features have been disabled for the connection of bridge.

  If the Time Capsule (TC) provides the wireless network, then you can secure it using AirPort Utility, as follows:

  • Run the AirPort Utility.
  • Select the TC and then, select change.
  • Select the wireless tab.
  • In the wireless security, select the type of security. I highly recommend that you choose: WPA2 Personal
  • Enter a password in the field password wireless. Enter the same password in the verify password.
  • Select Update.

  

• How can I change the name of my wireless network?

  I use OS X 10.11.4 and utility Airport 6.3.6. I would change the name of my network and I don't know how or where to do this. And once this is done, have what I would do with my extreme and Express to continue them to work?   Any help would be appreciated. Thank you.

  Cheers, Peter

  I use OS X 10.11.4 and utility Airport 6.3.6. I would change the name of my network and I don't know how or where to do this.

  You can change the name of the network using AirPort Utility as follows:

  • Run the AirPort Utility.
  • Select the AirPort base station and then, select change.
  • Select the wireless tab.
  • The network name can be changed in the field "name of the wireless network. Enter the desired name, and select update.