The screen resolution has changed.

Similar Questions

• The screen resolution has decreased after update drivers

  After update my drivers graphic suddenly decreases the resolution of the screen and I can not find recommended resolution

  I also, I can't find anything in the view of the dxdiag(DirectX Diagnosis) is there a way to solve this problem.

  I also tried to ride my driver and nothing happened and reinstalled again even if nothing

  happened that my pc is Lenovo ThinkCentre M58 SFF.

  I have download the because it might solve the problem but whilt installation it says that your computer does not meet the minimum requirements to install this software

  Click Start, type: Device Manager

  Press enter

  Expand graphics cards

  Right-click of your display driver, and then click Properties

  Click on the driver tab

  Click the driver rollback

  Restart, and then see if the problem is resolved.

• Screen resolution randomly changes from top down

  With great frequency, I find that my screen resolution has changed since the highest (1680 x 1050) at the lowest.  It takes much effort with the Control Panel, appearance, customization, display settings to make it back to the highest resolution.  Usually, I have to do in stadiums... Set it to second place, save it and then after about TEN TEST - set for the largest.  No idea why this continues to be and if I can help somehow.  I'll let the computer and the resolution will be fine.  I go back to him and he changed.

  My screen is a Samsung SyncMaster 216BW.  I checked for the modernization of the screen, but there is not.  With the help of Visa Home Premium.

  Thank you!

  You don't want to check for the drivers of the monitor; you want to check drivers for your * video card. Uninstall the old drivers and install the new. If this solves the problem very well. If not, then you use some software buggy in the background that changes the screen resolution or your video card has failed. In the first case, try a clean boot. If all goes well, add things at once, back test after each change until you find the culprit. If a clean boot does not work (and you have already updated the drivers), then you are looking to replace the equipment.

  Get the drivers of:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.Belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  How to troubleshoot a problem by performing a clean boot in Windows Vista - http://support.microsoft.com/default.aspx?scid=kb; EN-US; 929135
  MS - MVP - Elephant Boy computers - don't panic!

• Change the screen resolution - do not show at the edge of the right hand of the document or the screen

  I do an online courses for NSW electoral office and I can't read the right side of the issues. I use Vista business and can not find the option to display, if that's what I have to edit to change the screen resolution. I have a Benq G monitor series 19-inch LCD. This happens sometimes when I go to a bank site or the Centrelink.

  Hello

  Good to know that the information has been useful.

  If you have any further questions on your computer, thanks for posting your question, we will be happy to help you.

• Cannot change the screen resolution. Help, please

  I recently reinstalled Windows XP (service Pack2) on my computer and restored the office to the factory settings. Now, the screen resolution is stuck at 640 x 480 and 16-bit color quality as this was not a problem before. The screen that appears under 'type of screen' in the advanced settings menu says "default monitor" and the properties button is not clickable. I tried to connect another monitor to the PC, but it doesn't help. Can someone help please I really need to change the resolution of the screen to a higher quality? Also, the PC has an internet connection if that makes a difference. Any help is greatly appreciated. Thank you.

  ... What other drivers in addition to the graphics card and network card should I try to install?

  In fact, those who are newer than your current drivers.

  I understand your reasoning for installing the monitor driver, however, I'd personally chipset (motherboard), video, audio and network (LAN) first. After updating the video driver, there is a chance that it recognises so the screen correctly.

  I don't know if you have reinstalled Windows XP from floppy disks to install Windows or Dell installation/recovery disks or partition restore hidden, but nevertheless, the drivers that were installed during installation is as new as the installation media. Given that the media are at least 5 years and more (maybe 8 years and more), there is an excellent chance that all the material and device drivers have been updated.

  If you know the serial number or the Express Service Code on your machine, you can enter the page linked below and it should display all the downloads available for your computer. Otherwise, you may need to select one of the options under No., for example to choose from a list of all Dell products (it does not list a Dimension 1100/B110 that has many drivers/downloads available).

  Driver downloads &
  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  The page linked below contains a lot of good informaiton, including a list of drivers and downloads that may be available. I think that Section 3: how to determine the components in my computer? and Section 4: how to download and install a driver will help you get the correct drivers for the hardware devices in your computer.

  How to use drivers and downloads website
   http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_324722&isLegacy=true

  The page linked below describes the order in which Dell recommend for installing drivers.

  How to download and install drivers in the correct order
   http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_1A0C0937D62A8739E0401E0A55174744&isLegacy=true

  Kind regards

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• Windows 7 changes the screen resolution when video applications go full screen.

  When I have plenty of screen some video players, that the resolution of the screen on just the ordinary 1080 p 1080 p (native) that has a refresh rate of 60 hz. As soon as I exit full screen it activates again. Would be nice but when it switches the screen is no longer fits the screen and the user interface looks very grainy, the video actually looks very good. Windows Media Player 12 for this, while VLC does not, which leads me to believe its something to do with the way that Windows Media Player makes video (which I think it uses Direct x, which uses VLC OpenGL).  I have this problem on my computer and my brothers computer I customized built. The specifications are very similar, other that my computer has an Nvidia GTS 250, and has a Nvidia GTX 275.  Is there anyway to stop it from doing this?

  Data sheet:

  Intel Core i7 clocked at 2.66 Ghz

  6 GB of ram

  ASUS P6T SE LGA 1366 Intel X 58 ATX Intel Motherboard

  
  

  Just in case people always have a problem with this problem, pls here's a solution that worked for me...

  I spent the last month trying to solve this problem, and "youemailme" (another thread here) had the correct solution for me! And so Simple!

  I noticed on Blogs that this problem has existed for at least Win98 is not your computer or your operating system.

  The question seems to be programs in your Menu has a different screen resolution to set startup, thereby causing the screen resolution change when you start your computer. This isn't a MicroSoft program error, but rather a question of "settings".

  With me, what worked were 2 things:

  (1) perform the 'clean boot process' as advised by many to determine which granted software was causing the problem... and then.

  (2) right click on the name of the program (as discovered in above) 'problem' in the Start Menu > properties > compatibility.  For some reason, there is an option to "run in 640 x 480 screen resolution", which has been verified.  This program was in the startup folder and the cause of the problem.  Then unchecked the resolution box. No problem.

  In my view, there are a large number of people dealing with this exact problem. I hope that this process of step 2 could solve their problems.

  (ps, just thinking about it now, you might not even bother with the 'clean boot process' but simply go through all your programs in your Start Menu and run the 2nd step explained above. Should work?)

  See you soon

  Stephen

• "Apps are not work - this application cannot open, the screen resolution is too low for this app run to change your screen resolution.

  Origignal title: Apps does not work.

  I got Windows 7 Starter I have upgraded to Windows 8 Pro on my mini HP laptop, but when I select no matter what application I get the following message

  "This application cannot open.

  The screen resolution is too low for this app run

  Change your screen resolution.

  and when I press 'Edit your screen resolution' I found the screen resolution is the maximum 1024 x 600.

  Under him, I found the following warning "" your resolution is less than 1024 x 768 elements could not fit and applications could not open

  Please advise?

  I know this is an old thread, but I came across it looking for a solution to the same problem. It turns out that my problem has a cause simple and simple solution. I had accidentally pressed the "multiple displays" function key on my keyboard (F4 on my HP Envy) and therefore affect my screen out of two monitors without realizing it. I started getting the error "the screen resolution is too low for this application to run", came here, tried to change my resolution screen and then realized what I had done. Once I changed the key function to the PC only, the problem has been resolved.

• Hi, how can I change the screen resolution?

  I keep saying to change the resolution of the screen but don't know how to proceed and would appreciate some advice before doing the wrong thing.

  Hello

  I don't think there is a problem with Firefox, but I got a peek inside and I think I'm able to help.

  The screen resolution is a Windows 8 setting you need to change. I found this walk through (with screenshots) that should help you.

  I hope this helps, but if not, please come back here and we can look at another solution for you.

• Satellite A200 - 14 d: how many times can I change the screen resolution

  I would like to ask if often resolution change may damage the screen of my Satellite A200 - 14 d?

  Because now I'm programming in Assembly in resolution 640 x 480, and whenever I run a program, the screen should change its 1280 x 800 to 640 x 480 resolution, and it takes 1-2 seconds: it is empty, the backlight turns off, then the new resolution appears. I would like to ask if it permanently (often) could damage my LCD?

  Thank you.

  Don't worry man, it will not damage the screen ;)
  You can change the screen resolution often unhesitatingly ;)

• How to change the screen resolution of 1024 x 768 to 1600 x 900

  original title: How can I update my computer for the new screen resulition my old system just to 1024 x 768 and my new moniter is 1600 x 900

  My computer is fine, but I like update the resolution of the screen, it is only 1024 x 768 and I would that he 1600 X 900, what can I'd to make do this

  Hello

  Thanks for posting in the Microsoft Community. Looks like you want to change the screen resolution of 1600 x 900.

  We need additional information about this problem to help you better:

  1. what version of Windows are you using?

  2. What is the brand and model of the computer?

  Visit this link to learn more about the operating system that you use:

  Operating system Windows am I running?

  http://Windows.Microsoft.com/en-in/Windows/which-operating-system

  Visit this link if you use Windows 7 to change the resolution:

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Visit this link if you are using Windows Vista for change the resolution:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  In addition, check if the graphics card drivers are updated:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• change the screen resolution

  I have a laptop HP G72 - some time between when I went to bed and now the resolution on my built-in display has changed.  Currently, it indicates a maximum resolution of 1600 X 900.  The icons seem to be at least 50% larger than the last time I used the PC.  I restarted the PC without change.  I think my previous setting was 1920 X 1080.  Does anyone have any ideas or suggestions?

  Hello ffrase,

  Your resolution has changed.

  If everything worked fine last night, maybe an update has been applied, and some setting has been changed.

  Since it has not been long since the problem started, you can run a system restore.

  This will bring the system back to when everything worked correctly without affecting your personal files.

  Here is a link on how to do a restore.

  I would like to know how everything goes

  Nice day.

• Unable to change the screen resolution in windows XP

  I have a problem with existing XP OS installed on my machine. I installed Windows XP newly.installation in the success.but screen resolution is low, I'm not able to change the screen resolution.please help me in increases the resolution of the screen.

  Make sure that you have installed the latest graphics drivers for your PC. Download and install from the Web site of the manufacturer of your PC, or if the manufacturer of the graphics card. After you install the drivers, you should have I hope more available screen reolutions to choose.

• cannot change the screen resolution because it doesn't lower settings

  My computer, in my library, running Windows XP Pro, have a problem of not letting me change the screen resolution. When I go and change it via Control Panel control and put in what should work it changes again in 4 bits and the bottom pixel. Any ideas?

  HI RogerSavoie,

  Did you solve your problem? If this isn't the case, please create a new thread and provide the brand and model of your computer with the version of Windows you have installed.

• How to change the screen resolution and appearance?

  Original title: stretched display

  display on laptop and just strained it whack coloring pages to print, would go back to the original and tried to restore

  I went to control panel, appearance and themes and screwed something. previously, he showed 2 moniters, 1 for only

  Hello

  Please follow the steps below to solve the problem:

  1. I suggest you to change the screen resolution. As you said that display seems it to be stretched, it would be possible to have a resolution which could be better adapted to your type of monitor. Check out the link mentioned to change the resolution of the screen below:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  2. you may also like to designate the link mentioned to get the best display for your type of screen below:

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

  Please see the link for more information on customizing your useful office below mentioned:

  http://Windows.Microsoft.com/en-us/Windows7/help/desktop-personalization

  Kind regards

  GauravPrakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.