The search for new web hosting

Similar Questions

• The search for 'new' emails are NO emails unread.

  Organization of the emails through filters to specific subfolders to be completed successfully. However, if the records are NOT developed, you cannot see the 'new' emails unread. Thus, in order to 'find' where they are quickly, I try a search for 'new' emails. There is NO search condition for 'unread', so I'm looking for "new". Thunderbird apparently does not recognize emails unread as new.

  How to make this work properly? Where can I get 'no read' versus 'new '?

  Best regards

  Ken

  Try this:
  View > folders > unread
  or
  Icon of the menu > folders > unread

  Return to view all folders.
  View > folders > all the
  or
  Icon of the menu > folders > all the

• Disable the search for news in the Iphone

  Is there a way to disable the news listing in the iOS which appears when you enter the menu to search for your iphone? (forgive me if my terminology is inaccurate: I am referring in the menu that appears when you slide the screen down, or move to the screen on the left in the iphone) Currently, there is only the possibility to disable the 'News' application, but I'm not aware of any possibility to remove new research in the search menu.

  Thank you

  Hello

  I also had this issue. After some googling I discovered the solution: go to settings > general > Spotlight search. A huge list of apps is listed here under "Search results" and new is one of them. You can press the switch to turn it off.

  I hope this works for you and answer your question!

• How can I tell the mail client to search for new mail on the server?

  How can I tell the mail client to search for new mail on the server?

  Within the Mail app and display the Inbox you can pull down on the list of e-mail using your finger and you should see a small reel spinning gear. Which indicates that his check new email.

  You can also go into the settings of e-mail and calendars Contacts and view the settings there. Examine the settings of "search for new data. If the Push is enabled, then messages will be pushed to you if the email provider supports this feature. You can also set your accounts to use Fetch and set the frequency, he's going to go out and look for new e-mail messages.

• I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

• Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not search for new updates after the troubleshooting and repair of updates

  My computer Windows 8 began to refuse to install windows updates.  I've been through the troubleshooting steps in Help and online.

  Now, what I mean is "Windows could not search for new updates", code 80073712.

  Troubleshooting Windows Update tool, solve problems as an administrator, gives:

  Error Windows Update Database that can be detected 0 x 80073712... Fixed.

  Windows Update components and need to be repaired... Fixed.

  I'm skeptical about the 'Fixed' part, because if you run it again... he finds and it 'fixed' the same problem.

  DISM.exe/online/Cleanup-image /Restorehealth and /scanhealth the two report error 14098: component store has been corrupted.

  Feel free to ask me questions to debug it, I'm fairly technical...

  Hello

  You can try this fix based on Windows PowerShell and see if that helps:

  http://www.kapilarya.com/fix-Windows-8-1-Unable-to-check-for-new-Windows-updates

  Hope this helps, good luck :)

• Vista - Error Code: 80070426 (Windows could not search for new updates)

  I have Windows Vista Home Premium Service Pack 2 on HP Pavilion dv6700 Notebook PC 64 - bit operating system. For about a month, it stopped updating. Whenever I want to update it gives me the same message "Windows could not search for new updates. Error encountered, Code 80070426 ".

  After the possible solutions for others, which posted a similar problem, I typed "service" on start search and on the side slsvc, it gives a description. When I click Start the service, it gives me the message "error 2: the system cannot find the file specified."

  I appreciate any back feeding to help me solve the problem.

  Thank you

  Mikielle

  mikielle,

  0x80070426 - ERROR_SERVICE_NOT_ACTIVE the service has not been started

  Make sure that the automatic update services has been started.  Make sure that BITS is started.

  1. click on start and run, type services.msc, and then click ok.

  2. in the list of services, click on automatic updates, and then click Properties.

  3. in the startup type list, click Automatic, and then click on apply.

  4. If the service status is stopped, click Start, and then click ok.

  5. right click on background intelligent transfer service, and then click Properties.

  6. in the startup type list, click Manual, and then click on apply.

  or

  1 ddwnload and install the wga http://go.microsoft.com/fwlink/?linkid=56062 diagnostic tool

  2. after running the wga diagnostic tool, click the "windows" tab and then click on 'copy to clipboard '.

  3. then, visit the following Web site and create a post in the forum "problems of wga validation" and paste the results of the diagnostic data in a detailed post wga:

  http://forums.Microsoft.com/genuine/default.aspx?siteid=25

  4. a wga troubleshooting specialist will analyze the data and recommend an appropriate solution.

• error in the search for driver updates.

  I did a self diagnostic computer and he felt that the 6TO4 card has a 'configuration problem preventing it from properly start"," maybe he have good driver or may be affected by a hardware failure. "The Plug and Play ID for the device is 13" there was another driver that does not leave too, "Plug and Play #is ROOT\ * 6T04MP\0000» I am also including the information that I found on the driver #' s: pilot 6TO4 adapter c:\windows\system32\DRIVERS\tunnel.sys-driver version: 6.0.6000.16386 file version: 6.0.6001.1800(longhorn_rtm.080118-1840). I also found, "this device cannot start code 10.", "Windows finds drivers software for your device but encountered an error trying to install it.". He also told me that Sigmatel C-major also had information about this but I have not checked who yet because I found on a part of the device manager that all the updates had been installed. I went to Windows Update to make sure that all my options have been exhausted and found: "Windows could not search for new updates and error occurred when searching for new updates to your information. Error found Code 80070490. Windows Update has encountered an unknown error. ». He also told me to ask for help, so here I am, I have not install no matter what material I have downloaded a few security programs and what not, I'm too hip on Windows automatic updates I am too a novice not I don't (yet) know it as the computer and does not need, so I left it on automatic from the start. I have clkd on the diagnosis of the problem and the solution to go home, which is what you see above, I tried to clk on install updates, but the computer says all updates are installed, but the driver does not always work. I've had the computer for less than a year (my first one), but I had no real problems with it other than what I've caused by my own ignorance. If I had not run that diagnosis I wouldn't have known I had a problem with the driver, but it is obvious to me that if the computer will function even though all aspects of it should work. I only know about it for about a week, I had other things to do and I can do without this driver does not work, but I want it fixed too. So what do I do about it? Thank you for all that help you can provide.

  Hello dumdeedumdum,
   
  a. you have problems with the network for not being able to update the driver?

  b. What is the operating system installed on your computer?

  The best way to fix this would be to go to the computer or the device Manufacturers Web site' and download the updated driver.

  Do not scan the computer for the update of the driver.
   
  If all your devices and the network works well, you can skip this update. Microsoft has confirmed that it is a problem in the Microsoft products listed in the section "apply to".
   
  If you have a Vista-based computer, you can consult this article:
   
  http://support.Microsoft.com/kb/932520/en-us

  I hope that the information above helps you.
   
  Kind regards
  Manasa P - Microsoft technical support.

• Error code 80072EE2: Windows could not search for new updates.

  I am unable to get the Windows updates.  I repeatedly receive 80072EE2 error code: Windows could not search for new updates.  The help of instructions indicate I would add three updated addresses my firewall.  I am running McAfee Total Protection with a firewall, but I don't see an option to add addresses.  Do you have suggestions about this problem?

  Hello

  Did you face this problem after installation of McAfee?

  Follow these steps:

  Method 1: There is no option to add the URL of Web site in McAfee firewall.  However, you can add the URL in the filtered McAfee Web site. Click Parental control, clicking n config on the right panel, by clicking the forward button, and then click filtered Web sites on the left had Panel Add URL.

  Windows Update error 80072ee2
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2

  Method 2: Run the Fixit and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

   

  Method 3: If this does not help, you can temporarily disable the antivirus and check if that helps.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Satellite P105-6064: Windows always searches for new hardware, reader of CARDS SD

  When I insert my SD CARD windows search for new hardware, it happened only with the SD CARD, when I use my CARD MMC is not the problem, I have the latest drivers on the site of toshiba and windows XP - SP2

  Hello

  It seems that the Satellite P105-S6064 PSPA0U supports a 5 - in1 bridge media adapter.
  This bridge media adapter supports the shared locations. This means that several types of cards can be used in this slot as a Secure Digital (SD card) card, memory stick, memory stick pro, Multi media (MMC) card and card xD picture card.

  Seems that after the use of different cards, the pilot must be refreshed and so windows search new device.

  In my opinion, there is nothing wrong, but it would be interesting to know if the same thing happens on OS installed since the Toshiba Recovery CD.

  By the way; The Sat 105 seems to be a mobile US and if you need drivers you must search on the Toshiba site we drivers compatible and taken in charge!

  Best regards

• Windows could not search for new updates-error code 80070422

  Windows could not search for new updates

  Error: code 80070422

  [Moved from the community centre of Participation]

  Hello

  Which Windows operating system work?

  Please refer to:

  http://Windows.Microsoft.com/en-in/Windows7/Windows-Update-error-80070422

• Windows could not search for new updates: Error Code 80080005

  I'm doing a search for new updates to make sure that I'm updating and it will not search for them.  Any help would be appreciated.

  I ended up reformatting my computer to solve the problem.

• Windows 7 could not search for new updates code error C80003FA

  I just activated Windows 7. When I tried to update, I have "Windows 7 could not search for new updates C80003FA error code".

  Tried three times with the same result. Could someone, please?

  C80003FA ReadVerifyFailure - a read verification error occurred.

  1. What is the suite of security/antivirus installed?
  2 is a 3rd party firewall installed?
  3 - is an upgrade to another edition of Windows?

  Please click on the round of departure. In the search field type programs and files in wups2.dll

  Under programs right click wups2.dll and choose Properties, when the Properties window opens, click the Details tab.
  Version of the file and the product should be showing 7.4.7600.226
  Now do the same for c:\windows\system32\wuaueng.dll
  He, too, should show file version and product like 7.4.7600.226
   
  If the version is earlier than that, you will need to install the more recent Version of the Windows Update Agent.
  The easiest way to do this is therefore download and Save the Fixit found here - How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Run MicrosoftFixit50202.msi and choose its default mode.

  BUT, if the installed firewall antivirus/security suite or a 3rd party is causing the "reading check error" then the Fixit may/does not work.
  If this is the case, then Configure the system to boot after download and Save the Fixit.
  Then, run the Fixit after the reboot to clean boot state.
  Restart and Cancel the clean boot steps, restart again to normal Windows mode.
  
  NOTE: in the boot minimum state all the 3rd party firewalls will be disabled. When you run the Fixit either unplug the system from it is the network connection or make sure the native firewall of Windows 7 is now on by opening the control panel > Windows Firewall.

  Expert MowGreen Windows IT Pro - consumer safety

• Vista - can not search for new updates

  My last update on Windows Vista has been 25/02/2010...  I clck on Windows update and it tries but came back with WINDOWS COULD NOT SEARCH for NEW UPDATES.

  I disabled the result of nada firewall nwith.  WIndows Defender has been the last updated 25/2/1010

  Hi clamouring.

  In addition to what Jose was advised to do, try to run the tool components reset Windows Update:
  http://support.Microsoft.com/kb/971058

  If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.