the search just on my hard drive

Similar Questions

• then I just remove my hard drive without crashing the system

  I just back up files on the HARD drive. There is no system files or programs on it. Can I remove and replace it with a bigger memory HARD drive, without crash the system?

  Yes, you can remove the HARD drive without crashing the system by closing the PC, unplug the power supply from the socket and then remove the HARD drive.

  Please note that the physical HARD disk is different from scores.

  Hard physical HARD drive or disk drive is the hardware component for storage. The capacity varies.

  A HARD disk cannot be used directly when it is connected to a computer, that's why storage units with file tailored to the needs of the system to create, known as partitions.

  A partition can be a complete HDD (for example, if you have a physical HARD disk and you have only one partition C:\) or may be more than one partition of a physical HARD disk (for example, if you have a HARD physical disk and two or more than two partitions, such as C:\ and D:\).

  Therefore, you can check for the exact physical HDD and then remove it. To do this, you can go to the computer-> storage management. Check the link for more information:

  http://www.7tutorials.com/how-manage-your-disks-using-disk-management-utility

  This will show you the number of physical drives present in your PC and the partitions present in each HARD drive. So, once you confirm the HDD backup and partition (make sure that there no Windows installation, as says iFuton), you can shut down the PC, unplug the power supply and then remove the HARD drive.

  [Please note that you have nothing to do in the management of the computer, except to check the partitions and hard drives (denoted as disk 0 disk 1 and so on for disks hard physical as well as the corresponding scores appear accordingly)]

• I just replaced my hard drive. Can I replace everthing that I had saved by choosing "Restore" and it points to a saved file? Also all the Windows setting will find?

  I just replaced my hard drive. Can I replace everthing that I had saved by choosing "Restore" and it points to a saved file? Also all the Windows setting will find?

  Find all programs I had installed in C:?

  See if this tutorial will help.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

• Discover the usb hub and my hard drive speed.

  I would like to ask in this forum. I have a Seagate 1 TB external hard drive backup more USB 3.0. First when I bought the transfer speed still very well and I don't worry. After a few months, my data put in also increased as much time to something else as long as it is important to keep. The problem is that my hard drive now transfer data as slow as a snail. There just get 1 Mbps of transfer speed (only in my laptop, in all the hub in my laptop). When I plug it into another computer, it's fine running at 20 and 40 MB/s as normally as USB 2.0 wired hub. Another hard drive that plugged into my laptop works very well, so I guess that only my hard drive is never play well with my laptop, so that they begin to work ppliquee. I searched many tutorials that help me to solve the problem, but no one worked for me.

  Is it possible to solve my problem as something to change or update?

  I can't blame time my hard drive or my laptop because they are good, but if they linked together they do not work normally.
  I hope that all who read this can make suggestion or give a way to solve it. Thank you very much...

  Problem is a little Tricky and make me confusion

  However try to reinstall the USB 3.0 hub and USB drivers

  As you said the other disk HARD running at good speed, then the problem with your HARD disk and your computer

  Try the HDD running Test by downloading HDTUNE PRO and check the report of HDD health

• Restore the backup to an external hard drive

  original title: if I reinstall my Vista, how to make the backup on an external hard drive? Is it a procedure drag-and - déposer? I use a Seagate external hard drive and there is no help section.

  Have run the back up to the external hard drive, I would like to know how to use it when I reinstall Vista Home Premium system.

  Also, I tried to check the hard disk for errors, and he has not finished the event.

  Assuming that you used the backup of Vista and made program a full backup and not an image backup (although some of these procedures include the restoration of a full image backup), here is some information to help you restore data.  Try to read or at least most of the analytical documents before you start, so you get a good understanding of the process and the procedures involved.  Restoring from an external hard drive is a little different from restoring a secondary internal hard drive, CD/DVD or Flash drive or on the network (although quite close to the procedure of network). If you have used the Vista backup program, you can not restore using drag-and-drop - you must use Vista restore program.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works and even when it does not).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Just installed new hard drive 1 TB

  Just installed new hard drive 1 to and vista only reads only 127 GB. How can I get vista to recognize the full 1 TB

  http://www.vista4beginners.com/how-to-manage-your-disks-using-only-Windows-Vista-disk-management-tool

  Take a look in disk management.

  See you soon. Mick Murphy - Microsoft partner

• How to solve the problem of having a hard drive of the unknown?

  I have just installed a new western digital internal hard drive for my toshiba. The problem is that my computer called the unknown hard disk and also need of a digital signature. How can I fix these problems?

  You must follow the instructions provided with your hard drive.  This would involve the creation of a partition and format.  If you have a Windows 7 installation disk, you can boot from it and simply follow the instructions on the screen.  However, you need to get the drivers you need from Toshiba.  If you can get the discs to restore the factory settings, this would be ideal because that would include drivers AND software pre-installed.  This includes free software from Toshiba.  On my Toshiba Satellite L755 I bought in December, it came with instructions to create these discs.  If you did, you're all set.  If you do not, well see what you can get from Toshiba.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1.5 TB external hard drives is approximately $90 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now want to import some RAF b HD files

  I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now have to import some RAF of the HD files but LR shows them as dazed out and said that they have already been imported when I hover over the thumbnail. I have this problem when importing files in the same HD Canon CR2, and who have been treated exactly the same. Anyone got a clue as to why this is happening? Thanks, Phil

  Hi Phil,

  If Lightroom then reads these as duplicate files, it shows that they are already present in your Lightroom Catalog.

  You can search by file name and check if the image is present in your library.

  Kind regards

  Claes

• I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What do I need

  I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What should I do to change it?  I use DreamWeaver 2004 on a PC.

  You will need to correct the links that begin with "file".

  Now that your site has been defined, you just delete the bad links and DW left write the good ones for you.

  Click on the yellow folder on the property inspector, and then select the target page.

  

  If your site is small, you can edit the links manually (remove the part in red)

  content.htm file:///C:/desktop/localRootFolder/subfolder/subfolder/images/

  It would be useful that post you your code on the page so that we can see if you use the old technique or new for these links.

• My Mac stop working. I bought a new iMac. I loaded it to the top of my external hard drive, my Photoshop asked me to download an update and then told me it wouldn't work until I contacted Adobe. My InDesign has also refused to work until I contacted you.

  My Mac stop working. I bought a new iMac. I loaded it to the top of my external hard drive. My Photoshop says she needed an update and then told me to contact Adobe support. My InDesign just told me to contact Adobe support immediately. Nor will not work now. I try to contact Adobe support, but I'm stuck in a forum. What should I do?

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• Why can't I do a search in my external hard drive using Adobe Bridge CS6?

  When I open Adobe Bridge CS6 and try doing a search within my external hard drive, it will give my internal hardisk results only? This is the 1st time that I encounterd this strange issue. For this reason, I do my research with windows and then browse each result with bridge! which is really annoying.

  I solved the problem go on the search field and clicking the search icon where he will give a drop-down list of the 3 options, and then selecting bridge search: current folder and that solved my problem. Thanks for all help

  Date: Wednesday, August 14, 2013 06:45:55-0700

  From: [email protected]

  To: [email protected]

  Topic: Why I can't do a search in my external hard drive using Adobe Bridge CS6?

  Re: Why I can not do a search in my external hard drive using Adobe Bridge CS6?

  created by Curt Y in the General Discussion of bridge - see complete discussion

  You can search for an external drive if the operating system permissions are OK.  Bridge, however, will not look on different drives.

  Please note that the Forums Adobe does not accept attachments to emails. If you want to embed an image on the screen in your message please visit the thread in the forum to incorporate the image into the http://forums.adobe.com/message/5593774#5593774

  Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page: http://forums.adobe.com/message/5593774#5593774

  To unsubscribe from this thread, please visit the page message to http://forums.adobe.com/message/5593774#5593774. In the Actions box to the right, click on stop Notifications by e-mail.

  Start a new discussion in the General Discussion of bridge by e-mail or at the Adobe community

  For more information on maintaining your email forum notifications please go to http://forums.adobe.com/message/2936746#2936746.

• How can you save data of the iCloud on an external hard drive?

  How can I record data of the iCloud on an external hard drive?

  Is not possible. iCloud requires a Wi - Fi connection to synchronize data. Cannot do it on an external drive.

• How to reset the password forgotten on external HARD drive

  Hello

  I forgot the password of my external hard drive.
  How can I reset this?

  It has all my photos out there I want to come back.

  The external HARD drive comes with software that the password. Have you used this software?

  I m not very well what HARD drive you have exactly, but in the case of the password disk HARD unknown could be deleted, so I guess that by using such software.

  But I'm afraid, this is not possible and if yes, then secure files could serve more than m.

  I say it in a different way: password protection would be useless if you can remove any unknown or forgotten password. Don't you think?

• How can I copy an .exe file of the winow downloads on my hard drive?

  the header is the question

  "How can I copy an .exe file of the winow downloads on my hard drive?

  If the file is always displayed in the Download Manager window, then you can use open folder on the shortcut menu. If this entry is grayed out then the file is no longer at this location to download. Possible causes are cleaning software or anti-virus that deleted the file.

• I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C; Media Center PC 6.0)

  Bookmarks are stored in a file called places.sqlite in the profile folder.
  To find out where the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox