The Simulator installation problem

Similar Questions

• Simulator installation problem

  Hello

  I had a peek at the webcast which gives the Setup instructions for the BlackBerry PlayBook SDk and Simulator. I completed all the steps - installed the SDK, Simulator, VMWare Player. I'm having a problem in the last step during the installation of the Simulator, that is, I get a WinZip file and not an ISO file (which says that the presentation). On decompression, I get a bunch of folders and files, but no ISO file.

  Can someone please help?

  Thank you

  I've seen sometimes, if you have winRAR or something similar it open ISO files as if they were archive type files because and ISO is essentially a container for files and folders. Are you able to see extensions such as. ISO on your computer?

  Try this download of the file from the blackberry site and unzip the latter ONCE. After this let the file that it just decompressed as it is to instead open it again unzip again and the VMWare Player allows access to this file and see what happens.

• PB Simulator installation problem

  When I try to install the virtual machine for the simulator of PB, the installation begins as it's going to run its course, but it hangs just to this screen.  Anyone have any ideas?  Would it be an iso file bad?

  

  @langsky, in theory, you're supposed to "flip through"this contract of license to read and understand so you can accept it."

  In practice, it's basically ridiculous for several reasons, while many have made is to type capital G access at the end, or Q to exit and continue on.

• Satellite L300-1AQ - password utility and the Firmware installation problem

  Hello

  I recently reinstalled Vista after the first crash, then installation of linux.
  Now I installed most of the services Toshiba back packages on my laptop Sat L300-1AQ but firmware and password utilities are not installing back.

  Watch firmware available target error message is not available.
  Utility password displays the serial number is not correct.
  do not understand why these error messages come and how I can deal with that.

  Thank you

  Year s

  Hello

  Firmware update should only be done if you notice problems with the ODD (CD/DVD drive)
  In addition the laptop was equipped with various drives and firmware on the Toshiba page seems to be designed only for some some sides.
  So if the laptop uses other ODD then the update of the firmware would not be supported.
  See more information on the driver page for some details on the update firmware and what are the chances are supported!

  I m not very well why the t supervisor password utility could not be installed, but I think that the message: bad series appears that if you tried to install a tool that was not designed for this model of laptop or the operating system.

  The L300-1AQ seems to belong to the series PSLB8E and you must ensure that you have chosen the right model on the driver page.

  PS: don't forget that the VAP has been installed everything first!

• Loading new software via the quick installation problems

  I bought 2 programs to load on my Z22, the first load without problem, using a quick installation. The second cannot be loaded.

  I move the. Install files of people's Republic of CHINA in Rapid and then sync, it freezes, the cancellation does not work and ultimately (after about 45 minutes), I rebooted the Plam and stopped the application on the PC.

  I moved the. CPP on and it syncs successfully, then put it back and the same thing happens.

  On the Z22, I notice an installer of SM, and if I click on it I get a launch error "the application cannot be started due to a system error"

  The program is Solitaire Mania

  Can anyone help?

  Hello!

  Deleted that app install SM of the PDA and try reinstalling Solitaire Mania again via Quick Install.  Also make sure you have 5 MB of free space on your device.

  Message is about: Treo 650 (unlocked GSM)

• The trial installation problem

  Hello

  I am facing problems in the installation of the track of adobe... Please help for the necessary.

  Thank you

  Techvedic

  Hello Techvedic,

  have you started your attempts to download here: download a free trial or buy Adobe products | Downloads of Adobethere you can specifically select your desired application by clicking here: "join | Start for free | Learn' or ' join '. Try | Learn more»

  Good luck!

  Hans-Günter

• The Silverlight Installation problem error code: 2104

  I have tried everything that has been posted here, and I STILL have no answer to my problem! I don't understand why I still receive an error message because I have an uninstall program EXCELLENT who gets everthing to attack and I tell all about during the uninstallation of a program! Please help me

  GlennSmith1

  Glenn,

  Please contact the Microsoft Community.

  What is the exact error message?

  I wish that refer you to this article-

  http://support.Microsoft.com/kb/2608523

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Let us know if you have other questions about Windows in the future.

• Key and original Windows XP disc has activation with the re-installation problem

  My old machine running on Windows XP Professional exploded in April. I bought a new one and installed the original software (performed by a technician here in SA) disc.

  Microsoft raised a question on the authentic software and I provided all the originals to the Microsoft Help team, but my technician was to get Windows running again may 23 (after 8 days of waiting for a response from the Microsoft Help Center).

  Today the Windows operating system were asked again for activation - but it says that it is enabled.

  However I can not open a session.

  Is the product key: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

  The bar code on the label said hologram: 99994-625-347-755 b X 12-08297

  THE CASE WAS REFERENCE: 1177290811 and THE DATE was 22/23 May 2012.

  I was dealing with Jatin Gandhi, who has not responded to me since last week when I sent him an e-mail on the caveat on the question of the activation.

  I am running Windows XP because I have the drivers for instruments that are not upgraded to the other windows.

  Concerning

  Margie Hengstberger

  Hi Margie.

  Let me start by saying that is a bad idea to share your first and last name on a public forum. It is just as bad validate your product key. Fortunately, it has been blocked or deleted.

  Then, the majority of us who provide assistance here does not work for Microsoft. We are volunteers who give of our time and our knowledge. Therefore, your file number and the name of the person who helped you is of no consequence to us.

  With that, on the way, we will, if we can solve your problem. It is clear from your message and correct me if I'm wrong, that you have a Windows disk that was used to install Windows Xp on your current computer by some technicians where you live. Validation/activation issues have emerged, now, with the current computer. Apparently the technicians who installed Windows on your current computer gave you the Windows disc. Am I correct so far? If not, please tell me what I'm missing.

  In the interest of time assume that my interpretation of the scenario is correct. I would be very surprised if the disc you received is legitimate. It seems that the computer was in the period 30 trial when you received that would explain why you now get a request to activate Windows. The period seems to be very close to matching the scenario I described as well.

  Personally, if it was my computer and I had paid someone (the technicians who installed Windows) to the computer or to install Windows, I come back to that person and ask it be fixed. I think maybe it's where is the problem and who is responsible for this problem.

  For now, I will provide you with instructions to reset the trial period. However, the number of times that this is limited to four. Therefore, once the new trial has started, you will need to solve this problem one way or another, with technicians who have installed Windows on the computer.

  The trial of Activation reset:
  ------------------------------

  1 turn on your PC

  2 repeatedly press F8 and go to Safe Mode

  3. connect according to the normal
  (Note: administrator password is usually empty, or use the recovery password if CD does not know the password)

  4. leave the Office to fully charge (who answered "Yes" to continue mode without failure)
  (Note: this is just a long way to say go to Safe Mode)

  5. click on start - run

  6 type exactly: rundll32.exe syssetup, SetupOobeBnk (then click OK)
  (Note: a single space after 'rundll32.exe' also the Oo are two letter o in "oobe"; capital and the comma are important)

  7. wait a few seconds (although you won't see any change)

  8 restart your PC normally (start - stop - restart - Ok)

• The ACS installation problem

  I have problems reinstalling a server ACS (4.0 on Win 2003).

  I get a lot of error messages like:

  "Failure of line 194, CryptAqquireContext... V:\ismg_israel_acs\Acs\Crypto\init.c. »

  I have no disk called V currently mapped, and the name of this directory is certainly not familiar. It does not exist on this server at all.

  I used the same setup files on the other servers before without any problem.

  I also searched the registry for some of the channels in the error message, without finding them.

  It's really giving me a headache!

  If all goes well there's someone in the community who can help me on this.

  Hello

  Do not own you the V: drive. This is the location on the server where ACS has been compiled in this build.

  This could be due to a partially broken uninstall a previous version of ACS. You can try to get your hands on the clean utility (on the cd)?

  Or make one? findstr /I CiscoSecure *. * ? in your Application Data\... Microsoft... \Crypto\RSA\... and delete the file with the text of Cisco Secure container.

  Then you should be good to go.

• Total confusion on the CS6 Installation problems

  Hi all

  Can someone please explain in plain English what should I do to install Creative Suite 6 Design & Web Premium on my laptop replacement?

  • I have the download file of 4.7 GB I downloaded somewhere there.
  • I run the installer, enter my serial number, select the apps and it will.
  • Then, it fails with failed real software verification check.
  • I search online and find out that it's because of the revoked certificate.
  • I followed the instructions for audit failure download or installation. CS6
  • I go to creative cloud site and locate Adobe Illustrator - it lists only the CC which I did not. I can't find CS6?

  So I'm looking more

  • I followed the instructions to warning: 'Adobe Genuine Software Validation failure... '. » | Windows, more precisely: If you are not a member of cloud creative or using an operating system older than listed above, download and install the patch MAO of this link.
  • I download the patch of the MAO.
  • I have install the patch to the MAO. I now have Creative Manager of cloud on my desk.
  • I run MAC and still I can't find Adobe Illustrator CS6.

  I am confused to 100% by what do I do to re - install the software I bought legally. I have valid serial number (accepted and confirmed by the Installer) and an AdobeID valid, yet it seems no way to install the software. We are forbidden to download huge files on our network, but I already have the installation files, so I can't download anything new.

  I tried to look at the support and tried to contact support nothing helps, support pages can't send me around in circles and keep pointing me to the forums I have no idea why I receive cloud creative emails, links and icons on my desk - I have no creative Cloud and zero interest in him! I want to just install the software I own

  Download the CS6 products

  Mylenium

• The OPA installation problems

  http://www.Oracle.com/technology/products/applications/policy-automation/download.html
  
  We downloaded the policy of Oracle from oracle otn modeling. When installing after selection of the OPM product and clicked on next, we continue to see the error message another installation in progress, even if it is the first time that the product is being installed. I tried several times and with several versions of OPA.
  
  Clues?
  
  Thank you
  Sudip

  This isn't a matter of OPA - it is a message of Windows Installer. Try to restart and make sure no instance of msiexec.exe is running before starting the installation of the OPM.

• Vista Home Premium SP2 installation problems

  SP2 says its installed but Windows Update shows it as an available update. When I view the system information, it still shows only installed SP1. I tried the standalone install and I got error 0 X 80070564 connection failed. SP2 shows as has been properly installed on Windows updates the history but it shows also the lack of installation after 2-3 hours to install, restart, then back to sp1. I stop all AV, Spyware, adware, Windows Defender by other items on the SP2 installation problems. I also ran system preparation and the System File Checker. I am running Vista Home Premium 32 bit on computer laptop HP DV5 Dual Core. I have not found anything on the failure error connection displayed in the standalone sp2 update.

  Hello vinniegolf, welcome.

  I would recommend trying to create a new user account with administrative privlages and you try to upgrade to SP2 from here. This will tell us if it has something to do with the internal components of your user account.
  You can create an account via START > Control Panel > users
  Let us know what happens
  
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Discover the error of work when you try to run on the Simulator

  I get an error when I try to run my application of Flash Builder for the Simulator:

  An internal error occurred during: "Discover job."

  1

  I ping the Simulator without problem.
  I was at this for hours. Here is my configuration:

  -Flash Builder 4.5.1

  -Flex SDK 4.6.0
  -BlackBerryTabletSDK Air 2.0

  -BlackBerryPlayBookSimulator 2.0

  -VMWare Player 4.0.2

  -on Win 7 Pro 64-bit

  Any ideas?

  I have:

  -Upgrade Flash Builder to 4.6 (which took forever)
  -Re-installed Air BlackBerryTabletSDK 2.0 and integrated with FB 4.6

  Seems to work now.

• App works on the Simulator, but not on the device

  Just try to run the helloworlddemo app compiles fine and works on the Simulator without problem. All I get on the device is an icon of the application that does nothing when clicked.

  I had read this might have to do with the version of the JDE is high for the operating system on the device, but I'm running JDE 6.0.0.37 and the operating system on the device is 6.0.0.666

  I tried with my own app first, compiled, signed it and get the same result as helloworld, then its certainly some mounted sort of question but I have no idea of what

  Thank you

  Sheldon

  Thought of it - was to set the permission of application so that all 3 items were "allow."

• Private opens in the Simulator, but not on the device

  Hello world

  I have a BlackBerry Tour 9630 (4.7.1.61). I'm running the 4.7.0 Simulator in Eclipse.

  Does anyone know why my application would open up a private in the Simulator without problem, but the browser does not open on my real device? I get no error on the device, it just goes to the next screen. I confirmed that the internet works on the device, and I don't see why use only the type of browser BIS would be a problem (I also tried BES).

  Here is my code:

  UiApplication.getUiApplication().invokeLater(new Runnable() {
      public void run() {
  
      BrowserSession session = BrowserLocator
          .createBrowserSession(BrowserLocator.BROWSER_TYPE_BIS);
              if (session != null) {
                  session.displayPage(loginUrl);
              }
  
      AuthorizeScreen authorizeScreen = new AuthorizeScreen();
      UiApplication.getUiApplication().pushScreen(authorizeScreen);
      UiApplication.getUiApplication().popScreen(OAuthScreen.this);
      }
  });
  

  Thank you!

  Thanks for your help.

  The session was to return null. I was able to reproduce this behavior in the simulator using a different type of browser not supported by the service books. Finally, I removed my own BrowserLocator() class (for the call of a certain browser) and replaced by the BrowserSessionFactory() provided in the JDE samples. I now have the browser on the opening device.

  What is the safest Bet, to use the default browser of the device, or use a browser BIS?

  Thank you!