The size of the final memory disabled

Similar Questions

• Disable the internal memory 4270

  It seems that the internal memory of 64 MB has finally made me on my old Sat Pro 4270. I have a module 256 MB additional installed (work - tested on another machine). Is it possible to disable the internal memory on this laptop?

  Hello

  I think that it s is not possible. But I m not 100% sure. If you want you can try to find this option in the BIOS.

  Good bye

• Cannot change the size of the video memory in Satellite L30-113

  I have a Satellite l30-113 which has 1 GB memory and windows Vista.

  The size of memory that has been attributed to the vga is 319 MB.
  How can I decrease the video memory?

  Hello

  do you really mean 319MB? This machine only supports a maximum video memory 256 MB shared memory. So if you might have 32 MB (which is how I imagine rather memory assigned to your VGA) you can increase the video memory of this machine by changing the value of memory assigned in the bios of your machine.

  Do you know how to enter the bios?

  Welcome them

• Satellite A300-148 how to increase the size of the graphics memory?

  Hello..

  I have satellite a300-148, I update my laptop RAM from 1 to 2 GB but the VRAM is always 128 MB. and in the toshiba site write this:

  ((Graphics Adapter:))
  Manufacturer: Intel
  type: Intel® GMA X 3100
  memory: up to 358 MB total graphics memory available with 2 GB of system memory
  memory type: shared))

  But my laptop no graphics card (intel GMA X 3100) is (mobile intel 965) how can I solve this problem?
  There are different between the two adapters? How to increase my laptop memory graphic size?

  Please help me...
  thanx

  Hello

  > How can I solve this problem?
  Problem? What is the problem?

  Take a look here on this page of the Toshiba hardware specification:
  [Satellite A300-148 | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 150445]

  Laptop supports the Intel® GM965 Express chipset but the graphics chip is Intel® GMA X 3100
  As you can see the type of memory is shared
  What does that mean?
  This means that this graphics card shares memory with the main memory. Everything is controlled automatically by the graphics driver.
  If the memory of the graphics card is required then graphic driver would assign memory automatically to GPU.

  I hope this helps...

• Keep all the same memory size?

  I think adding memory to my end of 2014 iMac 27, obtaining 32g, get 4 8 gig glue.

  Comes with 2 4 gig,

  Thank you.

  When I increased the memory in my iMac, I got the RAM (3rd part) of the same size.

  

  Click on the 'Upgrade memory Instructions' which is located bottom left of the window of memory for detailed information on your iMac model.  See the photo above.

  

• Reference Dell will not load xp. Info Tech 0x000000c2 (0 x 00000043, 0xDFB25000, 0 x 00000000, 0 x 00000000) tells me to disable the BIOS memory options

  Info Tech 0x000000c2 (0 x 00000043, 0xDFB25000, 0 x 00000000, 0 x 00000000) system search floppy witch, I did not. Cannot start in safe mode that is blue screen tells me to disable the BIOS memory options, but finding where to.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the full and exact error message on blue screen?

  In response to the questions above could help us help you better.

  If the system restarts after blue screen then use disable automatic restart on system failure option to stop automatic reboot.

  Here's how:

  1. turn on your computer and keep pressing the F8 key before Windows starts.
  2. now in the Advanced Boot Options, select disable automatic system failure reboot

• Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. This process may be denied requests for some applications.

  When I start my laptop I get "your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. This process may be denied requests for some applications. "and my laptop takes forever or does not open my programs. any help? Thank you.

  less than low disk space,

  What seems to be the case, it's that your windows is having a hard time resize its file for virtual memory.

  my suggestion is to remove "auto" at that time, and then set a custom format.

  I recommend that you set the initial size of 2 and max at 1152.

  Here's how to put a link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

• When I put the virtual memory in windows vista is it ok! to enter the same size (MB) the initial size and maximum size boxes example 2877 (MB's) entered the two box?

  When I put the virtual memory in windows vista Home premium is ok! to enter the boxes the same size (MB) "initial size and the Maximum size" example 2877 (MB's) entered in each box for initial and maximum size?

  Yes, you can do it. The minimum must be large enough to contain an image of the core. If the maximum is too small, you will get the unpleasant results.

  This article has some tips on the size of the page file at the end.

  http://blogs.technet.com/b/markrussinovich/archive/2008/11/17/3155406.aspx

• How to increase the size of the graphics memory by default HD4600 on the envy 15-jt100

  I would like to run Pro Evolution Soccer in my 15 want jt100. However, the game checks the size of the graphics memory by default, and the default value is 32 M, that is so small that the game just does not work, even if the overall performance is enough for this game... Is it possible to increase the size of the graphics memory by default?

  Thank you

  Larry

  Hello lyy,.

  To answer your question about whether you can increase graphics memory by default, it wouldn't be. There are explanations to this here: Graphics Memory FAQ for Microsoft Windows 8 and 8.1*. He also explains that the way that much available is conditioned by the other components of the computer.

  Consider whether, you shouldn't have a problem to play Pro Evolution Soccer, on the laptop. You can check this with: you can run.

  To improve the performance of read this document: improve the performance of system without adding memory (Windows 8).

  I also recommend to test other games with minimum requirements similar or very well.

  Please let me know how it goes.
  Thanks for posting on the HP Forums.

• I ran the Windows memory diagnostic tool, he keeps repeating and will not be finished, finally Boot Manager Windows appears with the error code: 0xc000000d.

  I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
  Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
  This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!

  Any ideas on how may get a repair disk or fix it otherwise? Thank you very much

  Run Memtest86 +: your computer passes this test?

  Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• I have copy and paste files and folders, but the size of the destination memory is high compared to the memory of the source

  I copy and paste some files and folders in windows server 2003 for my external USB HDD, but the size of the destination memory is high compared to the source of the memory size

  Hello

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Pre set the size of the final file

  I'll try to find a method that allows me to pre-define the size of the final file to for example 1.8 MB. The idea is that I can set the size of parameter file (e.g.1.8MB) and lets say a resolution of 72 dpi for example. I run the command and Photoshop reasambles image to pixel dimensions necessary until I find myself with a file exactly 1.8 MB with a resolution of 72 dpi.

  The reason why? I need to convert 3500 images that are exactly 1.8 MB. The pixel dimension are not relevant in this case

  N ° not in PS. It doesn't ever work under very specific conditions, in any case. You would need to settle on a format that uses no compression or a compression method that is predictable and compress the same amount regardless of the content of the image and the program must have a way to enforce a file of cropping and scaling automatically size to reduce the number of pixels. Sort of a safe for the Web on steroids, but using uncompressed TIFF or something else. It may even be necessary to run the algorithm of coding in reverse and in a loop of trial and error and even then, the question is, how exactly the size of the file must match. Apart from some obscure programming demos which produce images specifically companies or generate specific buffers for testing purposes, I have seen nowhere implementation practice.

  Mylenium

• Disable the automatic memory management

  Hello
  
  Just set the following parameters "MEMORY_TARGET = 0" & "MEMORY_MAX_TARGET = 0" to disable the automatic management of memory in 11G and parameter sga_max_size & lower sga_target minimum of operating system settings "Process.Max - address space" and "Project.Max - shm-memory".» ATLAST Db bounce.
  
  Anything else?
  
  DB version: 11.2.0.3
  OS: Linux 2.6.18
  
  THX,
  
  Gowin

  Only two things should be done to activate the manual management of the memory: disable the AMM and EAMA

  Set the parameter to initialize MEMORY_TARGET to 0.
  Set the parameter to initialize SGA_TARGET to 0.

  MAX settings will server as hard limits for culture manually hide them if you want, if you do not set them so you will not be able to grow the caches manually online.

• Setting the shared memory size linux

  Hello
  I'm a bit confused on the parameters of the kernel, can you please share your views on this one please.
  Shared for the tt in the linux kernel memory is calculated as follows:
  Shared mem = perm size size temp + journal + fresh size generals 7 MB
  
  but when I look at the linux sysctl.conf, I saw that there is a great value for sharing memory setting (default) as ~ 68 GB, then I think that I should not override/decrease this value. What is your opinion? Setting the value default (68 GB) helps my DB behave badly? Or by assigning the value calculated as in the equation makes them much faster?
  
  # Control the maximum shared segment size, in bytes
  kernel.shmmax = 68719476736
  kernel.SEM = 250 32000 100 100
  
  # Control the maximum number of shared memory pages segments
  kernel.shmall = 4294967296
  
  Thank you very much.

  The shmmax kernel parameter simply sets a limit on the maximum size of a shared memory segment individual. It has no direct effect on performance. In general, it should be set large enough to allow the largest shared memory segment you need to create but smaller then the amount of physical memory in the machine. Shmall parameter sets a limit of large system on the total amount of shared memory (all active segments added) can be allocated. It must be also, in General, lower then the [physical memory on the computer.

  If one is defined on more memory in the machine is not an immediate problem. However, in this case, it is possible to create shared memory that is larger than the physical memory of the system (as far as adequate swap space is configured), and if this happens then the overall performance of the system will be affected, probably seriously.

  Thus, work on what you need and set accordingly.

  Chris

• Increase the size of the JVM memory in build.xml?

  Hello
  I want to know if it is possible to increase the size of the JVM memory in the file "build.xml" of my java fx itself? If so, how to go on this subject?
  Thank you very much.

  I think you can achieve this by specifying .

  For example:

  Hope that helps!

  Published by: ytw on November 16, 2012 12:30