the slow movement is distorted on DVD

Similar Questions

• Camileo H30: cannot use the slow movement on playback

  Hello

  I'm new to the forum so forgive any errors.

  I recently bought a friend and: 30 and he says that he cannot use idle on playback.
  He says he can save in slomo.

  He wants to show playback return to idle normal.
  This is not possible on this unit or if he has not found the right way to do it again.

  Any help muchly appreciated.

  Bowler Hat

  As far as I know that's not possible.
  You can save in Slow Motion but can not playback of videos in slow motion
  You can play only movies that have been recorded in slow motion

  I ve got: 30 well and could not playback in slow motion too.

• Unknown error. The slow movement and Panorama photo

  Hello guys.

  I just bought a Z2.

  I tried the phone today and tried most of the functions of the camera.

  Everything works fine except when I try to slow film (don't remember the function) and when I started filming, I got the message: 'Unknown error' the second I pushed the record button.

  And when I try to use panorama it worked for 3 seconds, and then he gave me half of a panorama shot. After that I tried again and now I get the message: 'Spin slower' or something like that. I get after 2-3 sec. Then I try again and again. And now I get the message 'Spin slower' the second I press the photo button.

  If something is not here.

  What is everyone has a problem with? Can we get an update / Fix for this soon?

  Is there something I can do to remedy this?

  Just one last question.

  I got a smart group with my Z2, and when I tried to connect it to the phone, I got the message: "Chip is empty."

  What does that mean? I got this message about 20 - 30 times above all of a sudden, I could connect to it. And then the band disconnects a lot, and when I try to connect it again, I get the same message and must try several times before it works again.

  Have a people great day.

  This seems strange, try this

  settings > apps > all > camera > clear data > restart your phone > check again

• The slow movement and frame rates?

  Hi I have a Sony NEX-VG20EH camera and it has an adjustable rate. I set the pace on 8000 and recorded some footage. When I load into the first it always shows as fps 50.00. I want to idle stuff but when I have it slow down 10% it is still very "nervous". Any ideas?

  I think you have confused with his pace the shutter speed of the camera:

  Shutter speed

  1/4 - 1/8000 (control video, manual), 30-1/4000 (photo, manual control)

  Frame rate

  record 25 p/50 p - smooth stem, cinema Full HD videos with choice of (progressive) 25 p/50 p frame rates

  A camera that draws 8 000 fps would be very rare and very expensive.

  Edit:

  As side note, if you actually film shot at 8, 000fps.

  you would probably specify the frame rate menu to interpret the film for this clip.

• Have two old CD/DVD with the old movies of family 8mm on them.  When I try toopen them I get a statement that ' cannot they in format Samsung "suggestions?

  Have two old CD/DVD with the old movies of family 8mm on them.  When I try toopen them I get a statement that ' cannot they in format Samsung "suggestions?

  that is a difficult question. Try VLC to see if it will open to them. Usually when the disc appears on the desktop, if you click on it and let go, then press the clover sheet and I (get info command), you should be able to choose which application/program can open them. I have not already heard talk of the "samsung" format, I know there is a stranger there (lie format MTS from Sony). Regarding the conversion of them, maybe MPEG streamclip or hand brake? worst case scenario, you may need to spend some money to buy a video conversion app/program

  Sorry I can't help you more

  JB

• Halo 2:When I use my mouse on the line, the cursor movement is very slow and jerky.

  original title: halo 2

  Hello... Just installed Halo 2 on my Windows 7, 64-bit desktop.  I have all the latest drivers. All other games work fine.

  When I use my mouse on the line, the cursor movement is very slow and jerky. Unplayable.

  I was looking for a patch for the game or suggestion on how to correct adjust them.  I tried the option in game of adjustment of moving the mouse, but it did not help.

  Suggestions please...

  ----------------

• How can I burn a movie to a blank dvd when the movie to burn is greater than the amount of space on the blank dvd?

  How can I burn a movie to a blank dvd when the movie to burn is greater than the amount of space on the blank dvd?

  How can I burn a movie to a blank dvd when the movie to burn is greater than the amount of space on the blank dvd?

  You could import the movie into Windows Movie Maker, use the 'split' option, split the video to 2 or more smaller movie files, then burn each smaller movie file to separate DVDs.

  This would be my method. There may be a better way.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Need help to make the movie to burn to dvd with Microsoft movie maker

  I don't know whether or not we have a DVD burner on our computer. It only gives me the ability to burn on a dvd when I try to publish a movie in movie maker from microsoft. is this in any way about this? I can download something and or transfer the work I have already done to media player somehow and do it? Also is there any kind of CD that I can burn that would play the pictures and sound on the dvd player?

  To burn a movie to a DVD and be able to play on a normal DVD player, you need WindowsDVD Creation.
  Windows DVD creation is included in the system IF you have either
  Vista Home Premium, Ultimate
  Windows 7 Edition Home Premium or higher.

  If your version of Windows is not one of the above, you will need to google for a 3rd party DVD Maker.

  t-4-2

• SONY TV TAV - L1 AND WHEN I TRIED TO EJECT THE DVD SCREEN LOCKED. NOW I'M STUCK FOR THE SAME MOVIE. W

  I HAVE A TV SONY TAV - L1 AND WHEN I TRIED TO EJECT DVD YESTERDAY IT SHOWS LOCKED AND IT WILL NOT EJECT. NOW I'M STUCK FOR THE SAME MOVIE. WHAT CAN I DO? IT IS NOT IN LOCK FOR CHILDREN MODE

  Hello Dimitra,

  I apologize for the inconvenience, it seems that the drawer has been locked inadvertently.  Please perform the following steps to unlock.

  1. press the power button to turn the monitor of the device.

  2 tap the input selection button to select "DVD".

  3. press and hold simultaneously the button stop and eject until 'UNLOCKED' appears on the front panel.

• I get about one second from the previous movie when the scene selection in the menu of the DVD

  I have PE 12 for mac and have a 21.5 "iMac with 4 GB RAM and 1 TB hard drive.  I asked questions on here before all of a DV footage.

  I have a delay of 1 hour, 20 minutes and used markers to scene to go to the cinema in the timeline panel.  There are 11 movies in the video.  Markers are at the beginning of the scene in question.  On some of the later scenes, I get about one second from the previous movie before the start of the current movie.  I did thorough tests 12 EP in order get my imported correctly DV film.  I finally decided to use LifeFlix to get the imported records.  When I was testing the creation of DVD, I have not found this second of the previous film in the current issue of the film.  The problem seems to be that less pronounced during playback on my DVD than VLC Player or Apple's DVD player.  I use DVD Widescreen Dolby Preset for the DVD.  I did a DVD earlier using brands of menu with the result being 11 main menus.  I decided to abandon this approach.  Two DVDs have the same second or so of the previous clip before the current movie.

  I tried to stop markers in the DVD to recreate what I had with Pinnacle Studio, but this resulted in a DVD with a 'mistake' at the stage of decision-making case and record a DVD with menus blacks half but for the buttons.  I had added some empty frames between scenes when adding the judgment of brands, such as advised by ATR, but this failed.

  I would like to use markers to stop it again, but the problem of the second or last if a clip is more pressing.  The previous screen is sometimes less than a second and has no picture, just sound.

  Never had this problem with my old program.

  I also had "Unknown error 2131042562" when writing a normal DVD with the project and the checkbox "adjust to the content of the available space." checked.  I also got this when trying to write on a normal DVD - RW disc, to test the DVD for 'Previous film' problem as stated above.

  My burner is a USB 3 Litton Blu - ray burner.  It worked without a problem since I bought it.  I also used TDK DVD that I used for a number of years without any problems at all.  Today I wrote a data DVD without any problem.  I also wrote the content of a DVD folder on the disc, after generating an image using disk utility and it worked successfully, I realized the same DVD using the software 'Burn' successfully.

  Again, I have never had such problems in the display of the videos on DVD before.

  Your help is very appreciated.

  I managed to get a DVD with 5 images of black video between the scenes I wanted.  Video of Black made sure the brands menu worked!  Started it at the beginning of the relevant scenes.  I've never had to do this before in any program.

  Add stop markers did not.  Brands menu would go up to a point half a second or a second before the required stage, as have no black video.  I tried all sorts of things to resolve this, even to copy the project using the project archiver and the opening of the copy, but nothing helped.  I don't really know how ATR has managed to get markers to stop working.  I even added 12 frames of black video between frames with markers of the judgment at the beginning of the black video and the marker of the scene at the end.  It did not work.  I have nothing out.  The program seems to create a folder, but there is no error message and no file at the end.  He writes date folder much faster than normal when using markers of the judgment.  Also do not work 12 images of the video I think.

  I gave up at stop markers.  The normal use of the menus seems OK.  Other programs like Apple Compressor have this type of menu structure.

  Note the use of 5 images of the black video locks marks menu successfully.

• When I try to distort large layers the area becomes is full of lines and symbols (and the layer I'm deformation is no longer visible) OR the lines move without the layer move at all.  In both cases, the results of the movements are visible only after

  When I try to distort large layers the area becomes is full of lines and symbols (and the layer I'm deformation is no longer visible) OR the lines move without the layer move at all.  In both cases, the results of movements are seen that when you hit enter.  Images and layers are big enough.  fight 1 GB.  I have a lot of memory and using 4 GB or RAM. on mac.  Any ideas how to fix?

  Thank you

  Could you please post screenshots to illustrate the problem?

  Not turning off"use graphics processor" in the Performance preference and restarting Photoshop have a bearing on the issue.

• When the finish movie in a dvd-media player comes up, then error

  Hello, I recently bought first elements 8, I did a movie photo, then tried to finish on a blank DVD. About 85% fact that windows media/video player automatically turns on and begins to play the film - I stop, look at the screen elements, and it reads an error that I don't remember.

  It has been 5 times, so I thought that the computer thinks it's a dvd, but when you try to play in a regular DVD player to the TV, the disks do not read.

  Anyone know what is happening?

  You should use share > drive > DVD and then what follows:

  

  Be sure to change the preset of PAL to NTSC if you're in an NTSC area.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Satellite A660 - Keep the downloaded movies freeze

  Hi all
  This is my first thread so apologies if it doesn't make much sense.

  I have an A660 Satellite that I bought at Christmas (still in warranty) that began to play up when I look at the downloaded movies. This has only just begun in 1-2 months, but it seems that when I look at a movie screen stops only for a nano second while the sound plays always. I tried DVD in order to see if there's a problem elsewhere, but they play very well.

  I don't have any idea what can be the problem and it does not seem to be mentioned on this forum.
  It has not gotten to the point where I can't watch a movie because of its interruption/freezing all the time.
  Can someone please?

  concerning
  OTTA

  Hello, OTTA

  Which player do you use to watch the movements of downloaded?
  What formats have these movies (mpeg, avi)?

  Is busy HARD drive when that happen (HDD led flashes)?

• Satellite L300D - can't watch movies using a Toshiba DVD player

  Hello

  I have a laptop Toshiba Satellite L300D - 12L and the toshiba dvd player has stopped working.

  The laptop is always able to recognize the dvd as the 'AutoPlay' box appears when a DVD is inserted and says ' DVD RW drive (e :)) "at the top of the follow-up to the title of the film.
  I then click on 'play the DVD using a DVD TOSHIBE movie'... and nothing happens.

  I tried several different DVD, which I know work in other laptops or DVD players.
  I tried by following this link...

  http://www.TechSpot.com/VB/topic27616.html

  and deleted the lowerfilters and upperfilters but that cause problems and I had to perform a system restore.
  I'm running out of ideas and I would like to be able to watch DVD on my laptop again because I don't have a TV or a DVD player.

  Any help would be appreciated.

  Thank you.

  Hello

  It seems that the CD-DVD drive can read the disc, but it seems that the Toshiba DVD Player cannot play video files

  Then maybe you should try to play the DVD using other software like Windows Media Player or VLC player download VLC player this small software and install it
  Then try to play the movie

  I recommend also to install the tool called DVD Player Update Check Tool that you find on the European driver Toshiba page.

  With this tool, you can check your laptop, if your DVD player needs an upgrade and if so, it gives you the download link for version upgrade needed.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.