The Sony TVs have Miracast

Similar Questions

• I ordered the Sony Movie Studio Platinum Suite 12 09/09/2013 and I have not yet received it.

  I contacted the support, and he told me it was on back order. So I asked them if they could send me the license

  and I could just download the software from the Sony Creative site. They told me that it was not possible and I would like to

  do wait until the software is available. Really? The software is digital. It must always be available. I talked with support since 9/13 and have gotten nowhere.

  I think I'll ask for a refund and take my business elsewhere.

  Good afternoon jlatham,.

  I'm more than happy to follow it for you.

  Please send me a private message with your details, order number and all details or reference numbers, that you may have.

  Thank you...

• Hello I have a Sony Bravia KDL - S2XBR9 55 "TV. The Sony entertainment network is available on this?

  Hello I have a Sony Bravia KDL - S2XBR9 55 "TV. Is available on this model Telivision Sony entertainment network. Appears as an update the firware, or it would be possible to push, already a lot of available Internet content?

  Hi Toyster,

  Unfortunately, the XBR9 doesn't have the Sony entertainment network. SEN content is available on 2010 units and more. Sony SMPN100, SMPN200, NSZGT1 and NSZGS7 will have the content of SEN. You can connect these devices to the XBR9 TV with HDMI and you will be able to access the content of SEN.

  If my post answered your question, please mark it as an "acceptable Solution".

• How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  How do I use the sony vaio VPCEC3S0E built in motion eye camera I have attached looking for the correct drivers but could not locate them

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the Sony Support, their online documentation and drivers (update or reinstall).
  and their forums.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My Sony Handycam DCR-30 does not have drivers for the camera and have not been able to take video of her, anyone know of a program to help?

  I went on the web to help, but I am a novice and have not been able to find a solution to my problem...

  Hello Devin,

  I looked for this model on the Sony site as well and was unable to locate.

  My recommendation is to communicate directly with the support of Sony.

  Forums - https://forum.sel.sony.com/?XID=M:showcase:esupport

  Contact Support - http://esupport.sony.com/US/perl/contact-land.pl?mdltype_id=33

  Best regards

  Matthew_Ha

• Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Take a look at the following article that may help you.

  http://community.us.PlayStation.com/message/2371488

  I recommend you contact Sony support teamfor further assistance.

• I have 2 laptops. I get messages from Microsoft WIN 10 and 365 personal Office located on the Sony. They are not. Technician?

  My Sony is no longer functional. I need Microsoft to fix. I don't have any idea what went wrong.

  Hello

   
   
  Please contact Microsoft Community.
   
  Please confirm some additional information to help you better:
   
  1. What is the exact message that you get from Microsoft. ?
   
  2 is installed on two laptops to windows 10. ?
   

  3 is it these laptops synced with one player. ?

  Office 365 family working on 5PCs/Macs more Tablet/iPad

   

  You can advise to refer; Secure devices FAQ

   

  http://Windows.Microsoft.com/en-us/Windows-8/what-is-trusted-device

   

  He wants to withdraw from the Sony computer in his Office 365 subscription list to do this. It can remove the device by logging on the Microsoft account and remove unwanted registered devices list.

   
   
  Get back to us with this information and we will be happy to help you further.
   
  Kind regards
  Anusha

• Visit the Sony Blog for a first look at the new Xperia Tablet S

  IFA 2012 is here and Sony SGNL is giving viewers an exclusive first look at the new Xperia Tablet S
  Visit the blog for more information!
  [url = http://blog.sony.com/xperiatablet:1ewwrje0] The Sony Blog [/ url: 1ewwrje0]

  [youtube:1ewwrje0] fI2azyXeync [/ youtube:1ewwrje0]

  If you want to be the first on your block to have one,
  Pre-orders begin today at
  [url = http://store.sony.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=10551&storeId=10151&langId=-1&identifier=S_tablet_landing&SR=tab:store:brand_bin:tablets:ss:1cw8mlrw] The Sony Store. [/ url: 1cw8mlrw]

• Lightning 30-pin adapter: it'll work on the Sony clock radio?

  My 4th gen iPod touch battery is almost dead. It can't hold a charge for very long. It's too bad that I can't replace the battery.

  My only option is to get a new one, I guess or plugged Dungeon that it connected to my Radio - alarm clock Sony until the battery is so bad that he can't even work with it.

  I went to the store Apple Genius and none of the children he could tell me if the adapter brightening work audio playback when connected. There is a warning on the Apple site that work with the adapter not all connection devices 30 pins.  The other concern is that one of the applications is made by Sony and that allows me to control the settings of the clock radio as well.

  Does anyone know if lightning 30-pin adapter works on these clocks?

  Some docks work with the adopter and some do not.

  Have you went to the Sony support site?

  Googling revealed:

  ple-iphone-and-ipod-dock-questions-answe http://reviews.BestBuy.com/answers/3545/product/9773885/Sony-clock-radio-with-AP...

  ANSWER 2

  The ICFC05IPBLK is Compatible with iPod® touch, iPod Nano 3rd generation, iPod classic, iPod Nano 2nd generation, iPod 5th generation, iPod Nano 1st generation and 5th generation, iPod 4th generation, iPod mini. With regard to connections using the lightning of Apple 30-pin adapter / lightning 30-pin adapter (0.2 m): due to the instability of the connection of the models of iPod and iPhone to our speaker system using the lightning of Apple 30-pin adapter / lightning 30-pin adapter (0.2 m), there is a possibility that one or the two dock connectors may be damaged. Sony does not recommend using Apple Lightning 30-pin adapter / lightning 30-pin adapter (0.2 m) with the Sony speaker dock with connector 30 pins.

  • 

  After the foregoing it seems the adopter functionally works but the adopter call will focus on the conn3ctors and damage it.

  There is a to adopt with a cable and that should work and avoid this damage, but the iPod will be on the table at radio Vice

• What happened to the Sony Utilities DLL 7.1?

  http://www.Giveawayoftheday.com/soft/6657/

  the link is dead for download. Anyone know what happened?

  sonymod_mb wrote:
  > Thank you for your message. PCG - U1 is not on the Sony eSupport site is
  > because it is not out in the Americas, the first set of model in U
  > in the United States has been the VGNU750P - I would recommend you contact Sony
  > Asia-Pacific support because they may have the correct driver files
  > for this model:
  >
  > http://www.sony-asia.com/support/produc... l + computer

  Thank you for your help, I appreciate it

• Appearance of the SONY Internet Player NSZ - GS7 logo then black screen, no signal.

  NSZ - GS7 unable to connect to the TV without connection for SONY installation logo then only black screen no signal. Help, please? I bought this player online, the initial Setup was easy... connected wireless to the network, combined with distance and sound and picture was fine and applications/internet access has been fluid. months later, I moved the player to the original connection from the tv to another TV and then tried another, then two more. the same problem on all the TVs were as follows:-plugged the HDMI out on the drive to TV-connected the player to the wall outlet power source and changed input on TV by HDMI. THE RESULT... the SONY logo appears on a black screen for about 10 seconds then TV shows NO SIGNAL. exactly the same problem on every TV. I did the Ctrl + SHIFT + BACKSPACE thr remote to reset the player, but it does the same thing... no black screen with the sony logo seconds then the no response the television signal. Help, please. Thank you. SONY Google TV player Internet. Model: NSZ - GS7. Serial No.: GS7 U2 12 c S01-1031511-1

  Follow the steps below to access the screen in recovery mode.

• PC does not recognize the Sony Walkman when it is attached

  In the past, I have downloaded podcasts on the website of the BBC, and then by clicking and dragging transferred files to the Walkman. For some time now, the PC won't recognize the Walkman when connected.

  The USB cable and the Walkman unit are not damaged - both checked on my PC at work.

  Norton anti virus downloaded a file at the same time of connection ceased, but which has been verified by one of its engineers to remove the software and put it back.

  A Sony engineer suggested countless solutions that are proved to be unsuccessful, including resetting and reformatting of the Walkman, for nothing will do.

  I uninstalled and reinstalled the Sony software and still no results.

  I saw a message a couple of times that reads; Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. When I tried to click on it, I was unable to register. Does anyone know what should be my next move?

  It seems to me that it is something PC based - it could be something to do with Media Player maybe... I don't know any more!

  In the past, I have downloaded podcasts on the website of the BBC, and then by clicking and dragging transferred files to the Walkman. For some time now, the PC won't recognize the Walkman when connected.

  The USB cable and the Walkman unit are not damaged - both checked on my PC at work.

  Norton anti virus downloaded a file at the same time of connection ceased, but which has been verified by one of its engineers to remove the software and put it back.

  A Sony engineer suggested countless solutions that are proved to be unsuccessful, including resetting and reformatting of the Walkman, for nothing will do.

  I uninstalled and reinstalled the Sony software and still no results.

  I saw a message a couple of times that reads; Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. When I tried to click on it, I was unable to register. Does anyone know what should be my next move?

  It seems to me that it is something PC based - it could be something to do with Media Player maybe... I don't know any more!

  I suggest the following:

  1. Uninstall everything related to first on your mp3 player.

  2 check your disk for errors, right click on the C drive in my computer, then choose Properties on the Tools tab, click dock now... then check the two checkboxes, then click Start then restart your PC.

  3 preform scan using

  http://www.Malwarebytes.org/ (recommended)

  http://www.free-AV.com/en/download/index.html (if you have Norton to day then ignore this one)

  4. to ensure that your system is clean then use CCleaner to get rid of the files useless http://www.piriform.com/ccleaner/download and also clean your registry.

  5. do the cleaning and disc fragment to improve the performance of your system. (optional)

  6 uninstall programs do not use u or recently installed that could have caused this problem.

  7. make sure that your windows is up to date and drivers work correctly and that they are aware also.

  8 run the checker (sfc) system via cmd files. (run cmd as administrator, and then type sfc/scannow) (recommended)

  9. use http://www.javacoolsoftware.com/spywareblaster.html to protect your PC against spyware, adware etc and keep up-to-date then use Firefox as your browser

  only use the block announcement more, no script and WOT for safer web browsing for Firefox. (Recommended)

  10. now, install your mp3player software and then connect your mp3 player to it no problem! If it did not then go in Classic view in Control Panel, choose Add new hardware and follow the instructions, if that didn't help then try the other USB port on your PC and do the same thing.

  11. If after all above failed, go into Device Manager while your mp3 player is connected and then see if the driver does not work properly or if it is there? If she's there with danger sign then try to uninstall or update the driver software or use restore option driver if they are available.

  12. If that failed then go to msconfig (type in the start menu search box, and then press enter) then prepare your computer to clean boot by disabling any departure upward the items and no windows services, and then restart your computer. See if it makes a difference? try again step 11. If it did then you know who caused the problem.

  13 minimize your startup programs hollow msconfig (type in there search box in Start menu, and then press enter) (optional)

• Can't use the product key, because 2 of the numbers/letters have rubbed off and I can't read them. What should I do?

  My computer crashed and now I have to put in my product key for microsoft. The only problem is that 2 of the numbers/letters have rubbed off and I can't read them. What should I do?

  Original title: product key

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• When I connect my computer to live tv antena to sony tv with a HDMI cable it works. When I hang the computer for the sony surround on tv is its great video without sound

  The use of the computer to work with a live tv to a sony surround signal to the TV sony brava. (6 months) with HMDI cable.

  Now only works computer tv signal just on TV.   Now, I GET only video no sound when plugged in the Sony surround.

  Geek team reset the desktop computer, but it still does not work.

  Hello
  When you connect the live TV antenna to the TV by HDMI sony, it works fine, but when you try to connect through the entourage of Sony you have a problem. There seems to be a problem with the sound surround sound sony so I ask you contact sony support to make the necessary changes to get the audio output.
  Support for Sony
  http://eSupport.Sony.com/

• Support for files ARW [how to open the Raw files of the Sony RX100 IV in items 10 or 14?]

  I just purchased the Sony DSC - RX100 IV PSE 14 handles this type of file or do I have Raw Converter... I currently have 10 PSE.

  Devices supported by Adobe Camera Raw

  The RX100 IV was first supported in Camera Raw 9.1.1 which is compatible with 14 elements.

  You have two options:

  1. Upgrade to 14 items and edit Raw photos, or
  2. Download the free Adobe DNG converter, batch convert Raw RX100 plans IV to DNG, and then change the DNG files in 10 items. An extra step for you, but no extra costs.
     Digital Negative (DNG), Adobe DNG Converter | Adobe Photoshop CC Camera Raw: how to use Adobe DNG Converter - YouTube