The sound quality of ripped music is very poor

Similar Questions

• The sound quality of Windows Media Player problem

  Music sounds distorted and has a very poor quality, the QE is by default, and I know that's not the speakers or config because I play the same song with another player and sounds perfectly, I just about the haven´t a few days ago and I could find no solution, please help.

  Hello

  Click on an icon of right speaker near right lower clock - reading devices

  Highlight speakers - properties (right same low page) - tab improvements - check Disable all sound effects
  Apply - OK

  ----------------------------------

  There are also sound effects that you should probably turn off in WMP

  WMP - view-Plug ins - other

  WMP - view - improvements - Graphic Equalizer and SRS WOW & playing speed and other settings can affect the
  sound quality.

  Please install the appropriate Codec as shown above for your version of Vista/WMP.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The sound quality is poor on the Bluetooth headset while using the Bluetooth dongle

  Original title: Bluetooth with apt - x audio problem

  Hi, this is my situation.

  • Windows 8 installed on the PC.
  • Have a Bluetooth Sennheiser MM500 x with apt x helmet
  • Have a Sennheiser BTD500 USB dongle to connect headsets to PC.

  It is:
  Sound works, but the sound quality is very poor. Also very low microphone level.
  For purposes of disposal processes:
  • Have connected these headphones using headphones - audio jack perfect
  • Connected headset to another for TV and PC bluetooth dongle (which uses the headphone) - audio perfect
  • Appropriately high sound levels (mean level appropriate, but not obvious)

  In "playback devices" I am unable to click on the button set up (it is grayed out). Therefore impossible to then select a stereo sound.
  I don't think that there is a problem with my headphones or usb dongle. Believe is a matter of windows 8.
  Help, please! I'm about to throw my PC out the window!

  I'm the original poster. I tried everything, could not solve the problem. So I sold the helmet and moved my life! Haha. Good luck to all.

• Problems with the sound quality poor or distorted, watching Youtube videos

  Hello

  For these last days, I had a very annoying problem with playback of youtube videos since getting the latest update to Adobe Flash Player. The sound quality while watching videos is just terrible. Depending on whether it's a song with a lot of bass, singing or just commented video distortion is different. It's a craking, static-y sound, like a badly tuned radio in some cases. A few videos, in particular with certain frequencies of sound as I have said, can be a highly distorted.

  I've been quite well, with audio all around perfect before you accept the update. I didn't place Adobe Flash as the cause for a while, but after eliminting causes so many others, Adobe Flash, that's what I feel, that's the problem. All other audio sources on my computer are not yet perfectly (iTunes, MP3, MP4, etc.), it's just youtube.  I also tried other sites such as Vimeo videos I thought running with flash as well and really did not notice the distortion, but also I can't find a perfect video comparison, so I really can't be sure and do not want to exclude them. YouTube is the only one I can say absolutely not is affected badly. I checked my firefox Plugins and the Shockwave Flash plugin is indeed turned on. It happens also, regardless if I have a video to youtube with Firefox or IE. And one final note, I'm the administrator of this computer and the only user.

  I run Windows 7 64 bit

  I use Firefox as my main web browser.

  I have the latest update of Adobe Flash (11.2.202.228).

  I use a laptop Toshiba M645-S4070.

  Intel i5 processor

  4 GB of ram

  Realtek High Definition (I think that it is the sound card)

  I searched through discussions both here, on assistance from microsoft, and through google search in general try to resolve this and nothing has worked.

  I tried uninstalling and reinstalling, with and without restarting the computer complete between the facilities/unistalations, update my sound card drivers, check and disable my firewall during installation, installation offline, have some audio enhancement of course checked was leaving (right-click on the youtube video > settings).

  I'm really at a loss, and it can be painful to use youtube now as things. Also, if I need to post more information my computer please tell, since I'm not very knowlagable how to get specifications more than what I posted.

  Hope someone can help, thanks.

  I had the same bug with its bad, especially on scraps of bass-heavy sounds, but I found a job nearby

  Click Start-> Control Panel-> Flash Player-> advanced

  I deleted all of the "data and Site settings.

  Sound is back to normal now.

  I hope that helps!

• How can I improve the sound quality when the Sync property is set to 'stream '.

  I recently had a problem with the text in synchronization with sound (Narrator). For example, when a user has typed a button a Narrator reads the text on the page and want words to point out that the Narrator read the words. The problem that I ran was that she place well on the desktop, but the timing was off on some mobile devices. So I put the 'Stream' sync and it worked fine. But I ran into another problem; the sound quality is down, sounding muffled.

  How can I make the sound better when the Sync property is set to 'Stream '?

  You can control streaming sound quality in your publish settings that can replace the sound quality settings that you can set by clicking on properties of the sound of the library (click right/properties).

• How do I change the sound quality?

  original title: maintenance cleaning disc

  I want to change the quality of the sound, i.e., Hall, concert, band, etc. How to achieve this?

  Thank you very much

  GER

  Hello

  Right-click on the icon for a speaker at the bottom right.

  Choose - reading devices

  Click on your audio device, and click the properties button.

  Now choose the enhancements tab

  It might be what you're asking.

  Map the different manufacturers also have their own software - if you still have problems with this please provide us with your manufacturer of computers, model or preference card model, type, if known.

  Kind regards

  Joel

• EliteBook 8570w: the sound quality after update problem

  I connected the laptop to a docking station. The docking station has a connection to a headset/external amplifier. Ideal to connect the amplifier. Only in this respect has more no bass. The connection of the helmet of the computer laptop itself has a pleasant sound, but I do not like to keep card 10 x a day between headset and amp switching. (Phone + Amp = echo). My alarm only works with external stakeholders, but Skype and Softphone want the headset.

  Also, I turn off HP speakers in the system and have no more just the external headphones, since one of the most recent updates the internal speakers don't turn off when the headset is connected. This has implications for readers audio and video players, as they want their sounds through HP speakers. Only VLC mediaplayer has the possibility to move from one sound channel, but I have to change every time I start a video.

  Before the update, there was an automatic switch and I could let two of them on and the sound channel chose autamtically and turn to the helmet that was plugged, etc..

  I use Windows 7 64-bit and windows 10 is not an option due to various programs more alumni who should be updated (if it is still possible), which would be very expensive.

  I noticed something new has been installed called SRS Premium Sound Pro. Maybe it's the culprit. I dare not change anything in it.

  Does anyone know how to debug this?

  Hello

  Could update you the

  Driver Audio of IDT high definition (HD)

  Type:	-Audio driver
  Version:	6.10.6435.0; 5.10.6435.0(5 février 2013)
  System:	Microsoft Windows 7 Enterprise (64-bit) | See all
  Name of the file:	sp60317.exe (42 MB)

  Link: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5257503 & swItemId = ob_115135_1 & swEnvOid = 4060 #tab1

  Also, I suggest you to disable all the improvements in the properties of speakers and check out. See the steps below:

  1. Press on the key Windows + X.
  2. Click on Control Panel.
  3. Double-click the sound icon and click on speakers.
  4. Click on Properties.
  5. Click the enhancements tab.
  6. Now, click on "disable all sound effects.
  7. Click OK , and then check if the problem persists.

  If the problem still exists, as a solution, I suggest you uninstall and reinstall the sound drivers in compatibility mode and check if it works for you,. Refer to the steps below:

  Follow the steps to uninstall the audio driver:

  1. Press the Windows key + X key , and then click Device Manager.
  2. Expand 'Audio Video and Game Controllers'.
  3. Right-click on the audio device listed and click on 'Uninstall'.
  4. Select the option to remove the software driver.
  5. Restart the computer after its uninstalled.

  Now download the drivers from the manufacturer's Web site and install it in Windows 8.1 compatibility mode. Follow the steps below to install the drivers in compatibility mode:

  1. Right click on the driver configuration file and click on 'Properties'.
  2. Click on the "compatibility" tab and check the box ' run this program in compatibility mode for "and select operating system Windows 8.1 since the menu drop-down."
  3. Click 'Apply' and click on 'OK' and run the file to install it.

  Hope this helps you...

  Click on Bravo and accept as a Solution if my answer was helpful and answered your question.

  I am an employee of HP!

• Improvement of the sound quality/volume of the video

  I recorded some videos of a religious service, but the audio quality is quite poor.  It would be nice to find a way to turn 'up' so you can hear it without starting your speakers all the way up and blow when you change projects.

  Is there a way to tinker with sound quality? All the features that I found involve adding audio... not changing audio embedded.

  Quick help is greatly appreciated. I would like to have this video ready to ship tonight.

  Some audio features the most powerful, as I explain in my book is normalization and Gain Audio control.

  To access it, right click on an audio clip on the timeline, and then select Audio Gain.

  You don't say what version of the program that you use, but in all versions except the version 8, by clicking on the button to standardize will automatically increase the audio gain for the clip so it sound fuller and stronger. In version 8, this feature is not enabled, so you have to manually type in a number of gain.

  When you close this option button, you will see that the audio waveform for the clip is much more comprehensive. It should go 'wall' without being so strong that it overmodulates and distorts. You can try some Audio Gain settings until it looks about right. (Even better if you open the Audio Mixer Panel, under the menu drop-down window and look at the levels. "They should be full but not in red.)

  A lot more stuff like that in my books, available on Amazon.com and at the store Muvipix!

• problem with the sound quality (too fast)

  How can I fix a sound that is too fast, his voice like mickey mouse!  I tried the troubleshooting and purchase new speakers.

  Thanks in advance for any help I can get to fix this obvious internal.

  VS

  Yay!

  You are welcome and thank you for the comments.

  Merry Christmas.

• Unable to adapt "record level" for the sound recorder. Audio system works very well. Cannot find a software which allows the change to the record level of mic.

  I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  To adjust the record volume, follow these steps before you register:

  1. click on Start

  The collapse of this top this i, and then click Control Panel.

  2. click on hardware and sound.

  3. under his, click manage audio devices.

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Satellite P105-S6024 and terrible sound quality

  The sound quality on this laptop was very bad for some time.

  I tried all of the updates and drivers more recent download from Toshiba Web site without success, including latest conexant driver, which seems to be 2007. . . . I use XP/SP3. For a system that is supposed to have good sound quality, with harmon kardon speakers, it's frustrating because it is inaudible. The cracks of sounds, pop, is intermittent, is static and just is generally quite poor.

  There is not a problem with the volume, just the terrible sound quality any thoughts would be appreciated.

  Hello

  I see you are using the Windows XP which was not preinstalled by Toshiba.
  I think that this laptop came with the Windows Vista operating system.

  Have you noticed the same sound quality by using the Windows Vista operating system?
  I think you should check this.

  If the noise would do better to use the Vista then it might be a problem of sound driver.
  I found another audio driver Conexant for Win XP. I use this one:
  http://webpages.Charter.NET/mmooglemirror/Compaq%20C751nr%20Audio%20XP32.zip

  Check too!

• Yoga 10 - Very poor Bluetooth sound quality

  Hello

  I bought roughly the new Yoga 10 Tablet. Now, I wanted to use it with headphones and bluetooth speakers and noticed that the sound quality is quite poor. As the treble's strange artifacts in it. Pretty hard to explain but the sound is very audible lower both helmet and taken my old Tablet even to untrained ears. It's kind of compareable to a low bitrate MP3, although not quite difficult to explain.

  So far, I've tried connecting the load from JBL, Bose Soundlink Mini and a bluetooth headset from noname to the Yoga 10 Tablet and * ALL * have poor sound quality.

  Now the funny thing. When I connect audio devices bluetooth mentioned to my old Tablet (Lifetab E10310) or my phone (Galaxy Nexus) is by one of my windows device, there isn't * no. * problem with the sound quality. Yes I know bluetooth audio is compressed, but given the 10 Yoga produces its largely inferior to other devices the problem is clearly the tablet of Yoga of course from the same material. No difference if high sound quality on the map microSD or spotify.

  It is pretty much useless for listening to music via bluetooth.

  All suggestions greatly appreciated.

  Ok. Returned Tablet - problem solved. Sort of.

  I deffinately need an Android based Tablet, but it seems so difficult to find a good. I did not have high hardware demands and that Yoga 10 seems to do the trick and it was affordable too. However, it's a software has been total failure and I didn't want to exceed my return period to see if it matches Lenovo to solve problems. So now the hunt of another brand, but seems difficult. All have a major fault one way or another and if nothing else then on the battery life. Well. May be another couple of months with my Junk old Tablet and then the market will freeze. There was a glaring lack of introduction of beautiful tablets without major flaws for like a year or more (GPS might not be necessary, but a lot of apps that really just use google locationservice scored misunderstandably GPS as required, and as such it will install these apps via played googple - bad luck).

• The weird sound quality with backlight Fuze and mp3 VBR

  Hello world

  I got my Sansa Fuze (firmware 01.01.11F) 2 weeks and I have noticed a weird problem:

  When I'm playing some VBR mp3 files, the duration is not displayed correctly. Files of start playing very well, but when the backlight of the screen gets off (settings I tried different time, show all the same problem), the sound quality deteriorates strongly. These are mp3 files that I ripped directly from audio CD, samples are available on request.

  Has anyone else had this problem?

  Kind regards

  Soenke

  The question is under development.  Lower rate VBR can trigger the processor at a slower pace, the origin of the problem.  If the backlight is on, there is more work for her, and the rate increases.  The noise disappears.

  The decline in the rate increases the battery time.  This problem will be resolved in a future firmware version.

  Bob

• Everybody knows very poor sound qualtiy on the new iphone is?

  I traded in my Blackberry "BOLD" to get my first IPhone and the sound quality is absolutely horrible!   Let me know if there is a way to fix it.  Maybe it's my first and last experience with an Apple product!  Verizon is my ISP.  I didn't support let me know if you have any suggestions.

  Sound quality on what? Bluetooth? Play music? Make calls? With the speaker or the speaker in the ear?

• bad sound quality in the desktop version but not in the modern windows application

  I have a brand new Microsft Surface Pro 3 with all the updates that are installed and the latest version of Skype.

  When I use the modern windows application, the sound quality is very good.

  When I use the desktop app, it looks like wind. The poor sound is experienced by myself and the recipient and also when I echo test call.

  I uninstalled the windows application modern to have installed both causes a conflict.

  I tried to uninstall and reinstall the app without result.

  It is not the mouse or the speaker settings on my surface, because it works perfectly well when you use the modern windows application.

  any suggestions?

  I have now solved the problem by removing the MCO.

  For all those affected by the poor audio quality in Skype desktop client, please go to:

  Tools > Options > Audio Settings, then uncheck "Automatically adjust microphone settings" and "automatically adjusts the speaker settings.

  Credit for this fix is due to Tim Rolston of lovemysurface.net and I recommend his site to any other users of microsoft surface.