The target Collection problem... Help

Similar Questions

• Since the migration a problem - Help?

  I bought a macbook pro 15 inch a few days ago, I migrated everything on it since my older macbook - the more InDesign creative will not lauch but the rest seems to work ok - ideas?

  Reinstall the programs correctly.

  Mylenium

• How to locate the hidden collections that are targeted?

  Hi guys,.

  Sometimes, after setting a collection as a set of targets, I forget to change the setting back to normal - especially if it is hidden inside a collection.

  Is there something, when I turn on LR, to let me know if a targeted collection hides breast and must be restored to its default value?

  Thank you very much

  Raphael

  Nothing obvious to you say that.

  The (non-obvious) answer is that if you go to the Photo Menu and the first point is "Add to quick Collection", then you have not selected a target collection. If the first element is 'Add to the target Collection', then you have defined a target collection.

• Error "this Setup does not support the target platform.

  I need solve the problem 'this Setup does not support the target platform' Please help me :'(

  See these two sites:

  http://forums.Comodo.com/install-Setup-configuration-help-CIS/this-installation-does-not-support-the-target-platform-t59001.0.html

  http://forums.Comodo.com/install-Setup-configuration-help-CIS/firewall-wont-install-this-installation-does-not-support-the-target-platform-t61629.0.html;msg434058

  Comodo is apparently the problem.

• I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you

  I currently own Adobe Creative Suite 5 Master Collection. My computer crashed and I was unable to disable the program. Please help me to reinstall the programs, given that I have exceeded the download due to problems with my computer. Thank you

  Hello

  Please see the thread: https://forums.adobe.com/thread/2028937?start=0&tstart=0

  Kind regards

  Shelly

• Watch for problems with the target pc.

  Having several problems when you run the application on the target computer.  The label text is missing in a few words.  Some sub vi s when it is called must be open and centered, but part of the façade is cut.  Any help as to where I should start my investigation I checked all the settings of the vi?

  Thank you. Resolution of the monitor on the target has been with a value of 75%.

• Camera, followed by problem - prevents the target centered

  Hi, I'm working on a project as part of my studies building and programming a machine gun. I have a prototype built and tested with R/C and I have no problem tracking stuff when the unit is static (mounted on the chassis or next to the platform).

  What I want to do, is to be able to fix the camera to the "barrel", so it moves with him. In this way I avoid having to map and re - map servos according to distance, angles, etc. As long as the target is in the center of the image of the acquis, I can assume that the goal is correct.

  What I do now is divide the image into 3 'zones', left, Center and right and pan a camera attached to a servo regarding the whereabouts of the target. This is the question that I have - when the reached target the center of the picture, the camera continues to run until the target is the opposite, toggle direction and repeat the process. I'd appreciate it if someone could tell me what I'm doing wrong or missing, and if there is another way to do it.

  I use the Arduino module and an arduino nano for servo control.

  * When the unit is supposed to stop, as an input to the servo I got a reading of its current position, so it just stops.

  Due to the "never compare SGL, DBL EXP 0 /! 0, if force you the number to the nearest whole number of you AND that you are not working with complex numbers you should be OK.

  Please find attached my update to your VI (removed mathscript node) and the added shift registers - noticed while doing what you do not know the initial starting of the Pan and Tilt position - this will be affected by the range of your servos and is something you should consider that you could get on the edge of your rotation and try to drive the camera too far.

  Hope this helps

• Info-bubble-Widget problems with Mobile and Tablet (not able to close the target)

  , I created a menu droptown with the ToolTip widget. Why ist there is no option to hide the goal of 'no click' in the latest version of muse (sensitive)? Is there such an option in the latest version. Now I choose the option to hide "on deployment of trigger and target"-this works perfectly on the desktop, but not on mobile or tablet. When I point to the menu icon (trigger) on mobile or tablet, it opens the target, but there is no way to close it. What can I do? Can you help me with this? Thank you!

  OK, sorry guys, I just found the root of my problem. I chose "the reversal" to display the target container. When this ist is selected, the option "click" to hide the target disappears. If a "click" only works when selected for display and the concealment of the target...

• I need help using the target path tool

  Hi all

  I realize that I need to keep all my code in the main storyline, so now I need serious help with targeting movieclips and buttons, when I use the target path tool (the viewfinder in the action script Panel) it allows me to navigate to the thing I want, but when I use his suggestion it very often does not work , and I find myself using trial and error to get by.  ICAN get stuff to work, but I really have no idea why or how I do it, sorry to be a N00B, but I really think that if I can work that I get somwhere.

  See you soon

  void

  subtlefly72 wrote:

  Thanks kglad,.

  OK, this is essentially what I did, but its been a bit hit and Miss, but maybe now, I can't see why, your last sentence

  of course, all of these objects have which existed at the time your code runs.

  So if I'm making refers to something within a mc and it does not exist on the first image, there will be an error?

  exactly.

  also, what is this.  Object() and Object (parent)?

  I have to be the use of these?

  not when using the code on the main timeline.  "This" refers to the current scope, which is for the code in the main storyline, the main timeline.  What follows is the same:

  This.MC and mc

  This.var1 and var1
  

  And again, I want to know why the target tool gives me a path that does not work?

  I can't tell you much about the tool to the target.  I never used it.  but I tried to test this afternoon and it seems to work fine to target a nested movieclip.  again, you must ensure that this object exists when your code runs so if you're targeting something on the frame 2 (or more) of a movieclip using the code on frame 1 of the main timeline, the reference may be correct, but the object does not exist when your code runs.  There are a number of ways to handle this, if this is your main problem.

• NEED HELP as soon as possible - the ArrayCollection collection analysis

  Hi all

  My web service returns a collection of table as follows with the following columns: name, ID, power, time.

  An example of the full collection would be: name Power Hour

  Texas                 5                    6

  New York 6.4 6

  2.1 the California 6

  Texas                 5.1                 7

  New York 6.5 7

  2.6 California 7

  I wish that my histogram of having another series for each different name so they would side Side(x axis = hour, y axis = power), now my problem is that I can't link the original collection of table to a chart I want.  So I need to change the table something like this:(I think)

  Time New York California Texas

  6          5          6.4                    2.1

  7          5.1       6.5                   2.6

  any help is greatly appreciated! Code... even more! Thank you guys!

  Yes, that's my bad.

  After looking a little closer to the example, it seems you need actually a series for each value of time, not each SiteName. You also composed the data in objects with a property name for each time value. Unfortunately, each category axis would be evenly size a SiteName with only 2 values would be the same size as the one with 10 different values. I did, however, this small example that uses stacked columns sort of you show how the series is implemented. If this does not work for you, you will have googled around to see how you can make a desabscisses with dynamic widths axis.

  
  http://ns.adobe.com/mxml/2009" xmlns:mx="library://ns.adobe.com/flex/mx"
                    xmlns:s="library://ns.adobe.com/flex/spark" height="100%" width="100%"
                    creationComplete="creationCompleteHandler(event)" >
  
       
            
       
  
       
  
       
  
       
  
            
  
                 
                      
                 
  
            
  
       
  
  
  

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Huge problem with the graphics card. Help me pls!

  Unfortunately my pc is not guaranteed, so my last hope is here on the forum.

  I have Dell Inspiron 580

  

  Ok.So the problem was that I found myself not being able to open My Nvidia Control Panel to verify customization as one of my games was so bad. That's why I found that my disappeared from Nvidia and Intel HD Core i3 graphics took place.

  

  And yes my pc used to run with Nvidia I have proof: P

  

  I must say that for me (as a heavy gamer) was a great kick as Intel uses all my CPU and my games become so difficult to play.

  I have tried everything that I could to restore the return of Nvidia (except one: to reinstall windows) but not one chance :(

  Reinstalling the drivers did not help actually I don't even know the type of driver that I need because that Nvidia is not found.

  Any advice? It will go to normal if I reinstall windows?

  Thanks guys and sorry for my bad English :D

  Hi Georgina26,

  You use the graphics card onboard because your monitor is connected to the video port badly. Turn off the system, unplug the video cable and connect it to the video card into the PCIe slot.

  If you are not familiar with the snap of a monitor on the back of your computer, please let me know and I will give a link to some photos.

• Today I imported recently an android project in my workspace in eclipse android 4.2.2 then when I run the application it is show Eroor: unable to solve the target 'unknown target problem Android android-7 "tru."

  Eclipse SDK

  Version: 4.2.2
  Build id: M20130204-1200

  When I right click on the app and clcik as run as application Android Iam see following errors: -.

  The path location type Resource Description
  Is only permitted to line /tru system AndroidManifest.xml 20 problem with lint Android apps

  The path location type Resource Description
  Is only permitted to line /tru system AndroidManifest.xml 20 problem with lint Android apps

  The path location type Resource Description
  Unable to solve the target 'unknown target problem Android android-7 "tru."

   

  including AndroidManifest.xml is as below:

   

   

  
  http://schemas.Android.com/APK/RES/Android ".
  package = "com. Tru.
  Android: versionName = "3.47" android: versionCode = "073434" >

  
  

  
  Android: largeScreens = "true".
  Android: anyDensity = "true" / >
  
  
  
  
  
  Error: it is only allowed to the system applications
  
  

   

   

  A number of permissions of the Android app is not supported. The impact of these unsupported features varies.

  Visit this link and check the authorization of any authorized all in porting the app... If the permissions that your application requires in the right list you might need to make some changes in your application

  https://developer.BlackBerry.com/PlayBook/Android/apisupport/unsupportedapi_playbook_app_permissions...

• Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks.

  Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks. This is what im seeing.

  

  See my response in audition 3 error with installation

• I installed photoshop CS4 on a new PC with the original CD. Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target". Thanks for your help!

  I installed photoshop CS4 on a new PC with the original CD.

  Camera Raw does not show the 'Snapshots' tool and the tool "setting of the target".

  Thanks for your help!

  

  As you can see, you are using version 5.0, who can't stand still not instant in it.

  Please check for updates in Photoshop > help.

  Concerning

  Sarika