THE TIME CODE BASICS

Similar Questions

• Duplicate the time codes of the sequence on new video

  I have the same images of long interview in HDV and Cineform (initially I tried to edit the Cineform in CS3, now using CS5.5)

  I did a lot of changes, transitions, etc. with the sequences to Cineform I'm satisfied, but I realized that my sequence settings are not correct and the images seem to look better when directly encoded from the original HDV

  Is it possible that I can keep the current changes, but apply them to the clip HDV instead of the Cineform one in a new sequence: use the time codes of the cineform sequence to automatically change the HDV footage (clearly the time codes for both versions are identical)

  Thanks for the help

  Nick

  There is no simple way and automated for this - basically, you talk about a workflow proxy roundabout. PR is not the best when it comes to these workflows, unfortunately.

  The simple but tedious is to drag a master HDV clips to the corresponding element of Cineform in a sequence, hold down the Alt + Shift and drop it on the original clip from Cineform. This will make a game framework (using timecode) replace edit.

  You can also replace each main element Cineform in the tray (a,); just right click on a Cineform clip in the tray, select replace sequences and navigate to the corresponding HDV clip. This shouldn't be too bad if your Cineform clips all use filenames HDV original; extensions, of course, be different.

  You can also hack the project file XML to replace all instances of-Cineform, but that can be a little hairy (although much faster). This means your HDV and files Cineform with same file names, however. If they are not, no more than the foregoing are your best course of action.

• How to export a .mov with timecode file corresponding the time code on the timeline of my project?

  Hello:

  It seems it would be an easy thing to understand, but I'm deleting so far:

  I have a video of the source of long, 10 minutes (actually a series of film clips 16mm which were telecined to a single uncompressed .mov 10-bit with continuous timecode by a film laboratory) on my project timeline.  I need to be able to export a small section of the timeline for individual .mov files - and I need to be able to open the short .mov files in a logging of film application called F5.  Currently, I'm making these videos in H.264 .mov files, since it is a format that F5 can read.  Rendering/export selection "work area" of my project works very well, so it's no problem.

  The problem I have is that timecode of the resultant .mov H.264 files do not match the time code on the timeline of the project of my first - they always start at 00:00:00:00.  I don't want that.  If I made (for example) a section of 00:05:10:00 to 00:07:00:00 on my project timeline, I need time to start exported .mov file code 00:05:10:00 and the 00:07:00:00, does not restart at 00:00:00:00.  Is this possible?

  I'm in first Pro CS6.0.2 on a Mac OSX 10.8.2, all installed updates.

  Thank you very much.

  works by using "title" (cause its alpha) but does not work using the video black... I have to jump through hoops to do it this way... is nuts... so title works fast

  so you put cti where you want to start, updated title to the top he put above your video, timecode in, "generate", set the start time to slide the title at the end of your work for the export bar... and it should be good...

  safe way to ann is good also

• display the time code to query

  Is there says a way to weather the user of the application took their time code to display in frame or not? If not, can anyone think of a clever way to test this.

  This should work:

  If (app.project.timeDisplayType is TimeDisplayType.FRAMES)

  Dan

• Reset the time code in the player

  Is it possible to reset the timecode in the player window.  Shown in yellow in the picture below. Sometimes I'll edit several projects on the same timeline, and I would like to be able to get a quick run on each

  

  I just put an entry and exit point at the top and the tail of the sequence, it will then tell you the run time.

• How to change the time code on the timeline in 8.1?

  Where is this button in version 8.1?
  

  Hi mclenny,

  Please post on the Adobe forums.

  You can change it here:

  

  Thank you!

  Regalo

• How to see the time code of the item imported?

  I'm working on a music video, but I need to see its timecode, how to do?

  Thank you

  It depends on the version of the AE and images. Can you give more details? If your film is in the right format in CS5.5 you must ensure that the right boxes are checked in dialogue interpreting the film. Make sure the use of timecode source of the file is checked.

  

  Then, in order to display timecode in the footage Panel, you must go to the project settings and select use Media Source from the menu drop down.

  

  Your publication can be set at any timecode start and the default value is 0, but film window displays the timecode of the video.

  

  I hope this helps.

• Just bought a g30 and want to turn off the time.

  I can't find how to turn off the date and time, so it does not appear in my films. A lot of things to learn, too.

  This seems to be for the time Code.  Whatì don't ' want on my movies, it is the date and time, the video was recorded.

• How to retrieve the time UTC

  I am trying to retrieve time UTC how to get UTC time?

  or how to convert the current time in UTC?

  in java, I can use the time code below to retrieve UTC.

  Calendar cal = Calendar.GetInstance ();

  SimpleDateFormat sdf = new SimpleDateFormat ("yyyy-MM-dd hh: mm s");

  sdf.setTimeZone ((TimeZone.getTimeZone ("UTC")));

  Return sdf.format (cal.getTime ());

  But in the time zone BlackBerry only supports "GMT" as an argument...

  So, how to convert hour UTC for the hour UTC or how?

  In my view, there is only a non-significant difference between time UTC and time GMT you will get from BlackBerry.  The time GMT is NOT performed by DaylightSaving.

  So I think you can use both you get System.currentTimeMillis () as the hour UTC, expressed as a value of type long representative milliseconds since 01/01/1970.

  If you wish to format it, then things start to become a little more complicated.  But you can create a DateTimeField and set its time zone GMT, and it will appear correctly.

• Time code speed

  Hey, I'm putting in place a timer on a youtube video. The original video was recorded with fraps, I don't know if this will change anything unless it displays the video on a higher FPS.

  The format for the time code is btype:

  

  The time code itself runs FASTER the real time video, race allocate more quickly as shown in the following image:

  

  I would like to know how do the timer matches the speed of the video.

  Any help would be very welcome!

  Try your clip in a sequence of 30 frames per second.

  Interpret images if necessary.

  Then try the effect of TC (30)

• Manual setting of time code does not save in first Pro CC

  Hi, when I put the time code of an item manually (by clicking on the clip, change, time code) in first Pro CC, everything works fine until I quit Premiere Pro. When I left and open the project again, the timecode is back originally temporal clip and my changes have not been saved. Anyone had this issue or know how to fix? Thank you very much!

  You need to update to the newest 7.2.2.

• First sends EDL with 'invalid time code format string.

  Follow the suggestions in this thread, I try to send a PCA of a first sequence to Speedgrade.

  When I try to import the Speedgrade JEL, I get this error message:

  

  ERROR

  At the time point is not valid. String (hours) invalid timecode format: '23813 + 20'

  in edition 1

  File: LR001 V 001C 2813 + 20 17 23815 + 0:00 1 + 37

  Line: 2

  I have rarely worked with EDL, but have read the guides Speedgrade and first. I must be missing something but can't tell what.  Here are the details of my project:

  I'm editing in 24 fps. Video files are generated in After Effects of DPX files. The time code is based on the DPX filenames, with the time corresponding to the number of laboratory Roll (so 11:00 11 Roll)

  I export an EDL in the CMX3600 format. I tried two settings by default and without audio. Same results. I even get the same result if I do a sequence of a single clip and try to export this EDL.

  I don't think it's a matter of Speedgrade, because that if I try to re - import EDL in first, it seems that all clips are a single long chassis.

  Any suggestions on what I might hurt would be greatly appreciated.

  Thank you

  Lev

  Figured it out. Creation of project settings must be defined on the display Format: timecode

  Lev

• Burn-in time code does not not CS5.5

  Hello!

  I'm in first Pro CS5.5 on a Mac with os x 10.7.1.

  Trying to overlay the time code on a video, nothing appears in the viewer program after applying the timecode effect. The effect appears on the tab controls effects and will allow me to make adjustments, but the time code is not visible on the video. It's as if the program knows what I want to do, but just will not do the visible effect.

  I reinstalled the program and checked that Helvetica is installed.

  Any thoughts?

  Thank you!

  See the last entry on this page:

  "Known issues in Adobe on Mac OS x v10.7 (Lion) products"

• I can't seem to install SP1 with Vista Home Basic and receive the error code 80073712.

  I can't install SP1 with Vista Home Basic.  I get an error code 80073712.  I tried to install the system update readiness tool and it tells me that my system does not apply to it.  I know that I must have a file corrupted or damaged somewhere but don't know where. I'm confused. Can someone help me?

  Moved from Vista to install, upgrade and activate Forum.

  Original title: installation of SP1

  I know that I must have a file corrupted or damaged somewhere but don't know where. I'm confused. Can someone help me?

  Donald,

  The computer belongs to you or your employer?

  (When was the last time you checked your system for malicious programs?)

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/products/malwarebytes_free>

  (MBAM) Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  In addition, scan with the free Version of (SAS)

  http://www.SUPERAntiSpyware.com/onlinescan.html>

  `~`

  Click Start type cmd (you should see the command prompt fill up) right click and select run as administrator.

  Inside the command prompt, type sfc/scannow

  * Information about the System File Checker

  http://support.Microsoft.com/kb/929833>

  Reset

  `~`

  Run the link Fix It, you will find on this http://support.microsoft.com/mats/system_maintenance_for_windows/en-us>>

  `~`

  If no malware has been detected, then please download and Save the tool update system (or CheckSUR).
  http://support.Microsoft.com/kb/947821>

  Be sure to download the version of the tool that fits the computer architecture. If you don't know what it is, then click on the link under

  http://support.Microsoft.com/kb/827218/en-us>

  When the download is complete, please read this before you run CheckSUR.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135>

  Once you have configured and rebooted the system to clean boot state, run CheckSUR (. Windows6 0-KB947821-v10-x 86.msu or)
  Windows6.0 - KB947821-v10 - x64.MSU) with the system connected to the internet. It will download and try to fix the incompatible component store.

  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled.

  Open Control Panel > firewall Windows to check the native Vista Firewall now on.

  When CheckSUR finishes running, restart the computer.
  See if it can be updated now by opening Windows Update in Control Panel and clicking on the link to check for updates in the left frame.

  FYI

  If the tool (Checksur.exe) system update solves the problem, you will need repair Windows.

  `~`

  The time and date of this moment in British Colombia, Canada is 01:05

  Friday, February 14, 2014
  Pacific (PST) - 0800 UTC standard time

  UTC/GMT is 09:05 on Friday, February 14, 2014

  Current weather conditions in Vancouver

  Cloudy43 ° F / 6 ° C

• need help to modify the code for the timer

  Hello

  I hope that it's fairly easy. I have a code for a timer that counts down 60 seconds. So to start the countdown, a start button is pressed and once the countdown starts, there is a stop button. I want to change the code so that the timer starts automatically (I will be embedding in a web page). I know that to hide a button, I just need changevisible = true, visible = false. I basically just need to know hot to start automatically.

  Code in force here.

  clock_val = '60: 00.
  _root.old_time = '0 '.

  fscommand ("ShowMenu", "false")

  my_milli = 0
  old_time = 0

  function is_digit (x) {}
  var numbers = "0123456789".
  If (digit. IndexOf (x) > = 0) {}
  Returns true
  } else {}
  return false
  }
  }
  function first_digit_bunch (x) {}
  var x_len = x.length
  var xresult = «»
  var yresult = «»
  var xmode = 0
  var count_3 = 0
  for (i = 0; i < x_len; i ++) {}
  xchar var = x.charAt (i)
  
  if(xMode == 0) {}
  {if (is_digit (Xchar))}
  xMode = 1
  }
  }
  
  if(xMode == 1) {}
  {if (is_digit (Xchar))}
  xResult += xchar
  } else {}
  xMode = 2
  }
  }
  
  if(xMode == 2) {}
  If (xchar == ":") {} ")
  xMode = 3
  count_3 = I have
  } else {}
  xMode = 9
  }
  }
  If (xmode == 3 & & I > count_3) {}
  {if (is_digit (Xchar))}
  yresult += xchar
  } else {}
  xMode = 4
  }
  }
  
  }
  If (xresult == "") {}
  xResult = '0 '.
  }
  If (yresult == "") {}
  yresult = '0 '.
  }
  var zresult = Math.round (parseFloat (xresult) * + impose_range (parseFloat (yresult), 0, 59.99) 60) / 60
  return zresult
  }
  function extract_min() {}
  minutes0 var
  {if(!_root.is_set)}
  minutes0 = 5
  _root.num_minutes = 5
  _root.is_set = true
  } else {}
  
  If (_root.paused_time! = clock_val) {//edited
  minutes0 = first_digit_bunch (clock_val)
  //}
  } else {}
  minutes0 = _root.num_minutes
  }
  If (minutes0 < = 0) {}
  minutes0 = _root.num_minutes / / reset to the last value
  }
  minutes0 = impose_range (minutes0, 0, 99.99)
  _root.num_minutes = minutes0
  _root.num_seconds = _root.num_minutes * 60
  display_time()
  }

  function startTimer() {}
  extract_min()
  stopTimer()
  _root.milli_value = my_date.getTime)
  _root.my_milli = (new Date()) .getTime)
  _root.old_time = _root.my_milli
  btn_stop._visible = true
  btn_start._visible = false
  msg_stopped._visible = false
  _root ["timer0" + xmodule] .gotoAndPlay (2)
  _root ["timer00"] .gotoAndPlay (2)
  }
  stopTimer() {} function
  clock_val = _root.num_minutes + ": 00".
  stopTimer0()
  extract_min()
  
  }
  function stopTimer0() {}
  _root.timer00.gotoAndStop (1)
  display_time()
  btn_stop._visible = false
  btn_start._visible = true
  times_up._visible = false
  msg_stopped._visible = true
  _root.paused_time = clock_val
  _root.timer01.stop)
  _root.timer02.stop)
  _root.timer03.stop)
  }

  function endTimer() {}
  stopTimer()
  times_up._visible = true
  msg_stopped._visible = false
  the_audio.gotoAndPlay (2)
  }

  function decrement_seconds() {}
  _root.num_seconds-
  _root.old_time = _root.my_milli
  if(_root.my_milli == 0) {}
  _root.my_milli = (new Date()) .getTime)
  }
  _root.my_milli = (new Date()) .getTime)
  var my_diff = _root.my_milli - _root.old_time
  num_seconds-= (my_diff/1000)
  Alert ("num_seconds =" + num_seconds)
  
  }

  function calc_time (cur_frame, end_frame) {}
  var frames_remaining = end_frame - cur_frame
  var secs_remaining = _root.num_seconds //frames_remaining / 5 / / assuming that the fps is 5
  trace ("secs_remaining =" + secs_remaining)
  var display_result = seconds_to_minsec (secs_remaining)
  return display_result
  }
  function impose_range (x, lower, upper) {}
  if(x < Lower) {}
  lower back
  }
  if(x > Upper) {}
  back to top
  }
  return x
  }
  function (dry) seconds_to_minsec {}
  var mins_val = Math.floor(secs / 60)
  
  mins_val = impose_range (mins_val, 0, 99.99)
  
  var secs_val = Math.floor (seconds % 60)
  secs_val = impose_range (secs_val, 0, 59)
  var result = x_digit_string(mins_val,2) + ': ' + x_digit_string(secs_val,2)
  trace ("result =" + result)
  Returns the result
  }

  function x_digit_string (JNombre, x) {}
  no worry about more than numbers 999 or negative numbers
  var vstring = String (JNombre)
  return x_fill_zero (vstring, x)
  }

  
  function x_fill_zero (str, len) {}
  will not shorten
  var len = vresult_length
  var vstring_length = str.length
  var distance = vresult_length-vstring_length
  var vresult = str
  for (var i = 0; I < gap; i ++) {}
  vresult = '0' + vresult
  }
  return vresult
  }

  
  function start_timer_begin_exam() {}
  _root.controller9.gotoAndStop ("Start")
  //}
  
  function display_time() {}
  var clock_hexagesimal = calc_time(_root.num_seconds,_root.num_minutes*60)
  _root.clock_val = clock_hexagesimal
  trace (clock_hexagesimal)
  clock_num = clock_num + 1
  }

  You must remove the onENterFrame activity: delete onEnterFrame;