the top loops

Similar Questions

• Subgroup of experts can pass events to the top-level event loop?

  I'm working on a VI that may have up to 1000 controls (Yes, she really need that much).  To reduce the size of the user interface and increase the modularity of code, I partitioned design into subgroups that are loaded in tabs.

  Subgroups are responsible for:

  "VI reference to open"--> "invokes the method: Run VI '--> ' invoke the method: Insert VI»

  (Sorry, I don't know how to incorporate images here, yet)

  The upper level has some of its own controls in addition to the case of the Sub-group of experts, and it will be built on the design of producer-consumer model.  The loop of consumer manages the interaction with the hardware (write-only).  Each sub-group of experts will also have its own event loop to manage coordination of the user interface within the Sub-group of experts and also a preprocessing of data that results from the activity of the user within the Sub-group of experts.

  Here's the problem: go in the subgroup of experts, how do I pass an event up to the top-level event loop so that the hardware access request can be entered into the queue of the consumer?

  At first it seems I could solve this problem in two ways:

  (1) rather than to use an Invoke node to insert the Sub-group of experts, is it possible to connect the frame of the Sub-group of experts against a VI that is instantiated in the block diagram?   If there is, I can simply use dataflow to bring jury secondary to the upper level events.   But for now, it seems there is no way to have a subgroup of experts except by using the Invoke node.

  2) there is another way, that we have found, but this is an ugly hack. The reference to the 'Open VI' VI using, I use ' call method: control value: Get.  Gives me the value of a control in the Sub-group of experts, but there is no case of signaling, so I have to resort to polling stations, which slows down the user interface and breaks the model "Event Loop".

  Y at - it of other ideas for how to get events from the Panel under treaty to the next level?

  (of course, this isn't * all * the events we manage.)  The Sub-group of experts will actually a pre-treatment and then send only the selected events to the highest level user-defined)

  Thank you and best regards,

  J.

  I have not used the secondary method before, so I can't save what I think with real experience.

  But,

  If the Subvi who is put in a secondary control on front panel for a queue reference, I think you'd be able to do the Invoke node to set the reference queue control before calling the functioning of the VI.

  The other idea would be do not to have a reference of queue control to pass.  But use named queues and leave the Subvi in high school to create its own queue reference based on the same name that was created in the main VI.  When it ends, it could destroy its unique queue reference and not to force a destroy all and reference to the queue in the main VI would still be a queue works valid waiting for an another sub - VI at the secondary level to generate his reference to the same queue and sends the data in.

• Loop of auto repair. Computer will NOT start at the top.

  My HP Pavilion becomes a blue screen with "Unhandled Exception in thread system.  He then brings me to a window of auto repair.  If I click, 'Restoration', the screen turns black with the logo 'HP' and then gets stuck.  If I click 'Cancel', it brings me to a screen that says: "auto repair couldn't fix your PC.  "Log file: C:\Windows\System32\Logfiles\Srt\SrtTrail.txt.

  I tried to go to advanced options and get the command prompt, using:

  Bootrec /fixMBR
  Bootrec /Fixboot
  Bootrec /rebuildBCD

  I also tried to open safe mode.  All with no luck.

  Something else I could try?

  Thank you!

  Hello

  Try to run the automatic repair of a Windows boot disk that often works better
  as the recovery of the system.

  How to run a repair 'automatic' to solve the problems of Windows 8 start
  http://www.eightforums.com/tutorials/2843-automatic-repair-run-Windows-8-a.html

  ======================================================

  If necessary:

  How to start on the "System Recovery Options" in Windows 8
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc :

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  =======================================================

  In 'some' case will help this article.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
  online systems), their resources and the drivers and ask in their forums (if any)
  on known problems. Don't forget to update BIOS, drivers of low level chipset,
  and the other pilots of major on-board and separate devices. Those who alone can
  set all or part of these issues.

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8/8.1

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other troubleshooting methods BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available the OneDrive or other file sharing sites (such as MediaFire). If you have problems downloading the minidumps copy them on the desktop or the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  Download pictures and files
  http://Windows.Microsoft.com/en-us/onedrive/add-photos-files A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant. (also, Windows 7 and Windows 8/8.1)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ======================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and adapter (video) display driver is the most suspicious that there could be others. Antivirus/antispyware/security programs, equipment (heat) and major software issues can also cause the error. When you get to the section of the driver of the utility troubleshooting use my generic methods below, and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - updates of Windows to see if all drivers have been updated it. Other donor opportunities include security/antivirus/anti-spyware programs.

  ------------------------------------------------------------------

  BCCode: 7F 0x0000007E which is also 0x1000007E

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  http://msdn.Microsoft.com/en-us/library/ff559239 (v = vs. 85) .aspx

  ---------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - VIEW driver Microsoft set hide - update those without drain in their names (and BIOS and chipset).

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.

  Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.

  Repeat for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their own software and drivers and the other main device drivers you have.

  Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ========================================================

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC (Windows 8/8.1)
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to update Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a USB Flash Drive recovery or other methods:

  How to create a recovery USB in Windows 8 & 8.1

  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  How to start on the "System Recovery Options" in Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  Boot to the tip "Startup parameters" in Windows 8 & 8.1
  http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

  --------------------------------------------------------------------------------------

  Tests of memory intercept all errors, such as memory do not match (possible even for poles that seem identical) and how faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  How to run the diagnostic tool for Windows 7 memory (and 8/8.1) - in Windows 8/8.1 the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8/8.1 displayed at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7. (also 8/8.1 and 10)
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with MyEventViewer when the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why build on average has side effects on the parallel loop

  It is a simple parallel loop to process the average value of each waveform.

  

  When you use tools-> profile-> find parallelizable loops, it is said:

  This loop For may or may not be safe to parallelize. Warning (s):
  -One or more nodes in the loop For can have side effects.

  So, why? It is not reentrant?

  The average function calls an internal function of NOR, which may (or may not / be reentrant.)  You can always code to the top of your own average code fairly easily and could make it reentrant - that would probably solve your problem.

  Bob Schor

• Attempt to initialize in a table of MAX alias throws an error on the first loop iteration.

  Hey people,

  I'll ttach a picture of what is in place now.

  I think the DELAY init that VI is ready to go for this application because I work in an another vi, but it is simply not applied in the same configuration of matrix/loop.

  However inside the vi init, I get an error of the Open VISA. (Only when I try to run the code in the loop at the top of the image mode).  Anyone of you guys do all that I'm missing here?   It's almost as if the string element (alias name) is not being indexed in place?

  Thanks for your time!

  -pat

  HA!

  I got to work with a very similar configuration to jpg #2 I posted.  It turns over the weekend, someone pulled the device with the IP address of the system.  You don't need to initialize an array of the parent as I did in the jpg however.

• Stuck in the update loop

  Recently I have got stuck in a loop of update of Vista, to do an update, in which he will update 3/3 0%, then stop start etc. I was able to fix and restore to an earlier point using my recovery disc and repair mode.

  Here's my question, how can I avoid this in the future while still making updates. This has happened a few times that I've corrected by removing the updates, I thought that may have caused the problem, and then on the day that the above problem happened.  Now I have a large number of updates, is there a way to fix this problem or am I rimmed? I do each update one by one, if it sticks back and remove it? Seems like a lot of work to keep it up to date.

  I could simply ignore the updates but that seems silly. Any help would be appreciated, thanks.

  It will take a little time to do it:

  Here's how to uninstall an update (or make your system restore), change your settings to find the problem of those who and how to hide an update.
  There is no easy way to do it, unfortunately:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• What is the individual metal ring sticking out the top of my new Cruzer 16 Gb usb flash drive?

  A quick question: what is the little metal ring sticking out the top of the page top of my new Cruzer 16 GB "micro" flash?  What can it be used?

  Thanks for your advice.

  -G. Roberts 'Gary' Stevenson

  Hi Gary,.

  Yes, is to make a loop to put on a keychain.

  Does not exist on the memoirs, a tab for protection against Scripture.

  Link: http://www.sandisk.com/products/usb/drives/cruzer-fit/

  Enjoy!

  Sincerely, Alfred.                                                                      (Google translated)

• Vista to the top of the problems - get error message 0 x 80070020

  You can also read "the process cannot access the file because it is being used by another process".

  First, disable all security or anti-virus software you use.

  Then disable error reporting: http://www.howtogeek.com/howto/7863/disable-error-reporting-in-xp-vista-and-windows-7/.

  Then see if the backup works now.  It's two solutions I found online that worked for others - but you might have a different problem (but it's worth a try).

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Emergency: t5570e in the endless loop: applying update operation

  Ugh... what's up with that? I was logged into the workstation as an administrator, you are trying to join the thing to a domain. I decided to look for updates of windows; He said that they were controlled by "your system administrator" (it's me, btw). Finally managed to join the domain and restarted.

  She began to apply the updates of windows (27), obtained through 27, and then restarted.

  And now, it's in this loop of reboot without end. boots gets windows logo and flag, then flashed:

  "Application of an update operation 14999 14999 (\Registry\Machi...). (there very quickly to the top of 0, and the messege in parentheses is different for each 'operation').

  Help! Any advice?  I don't want to spend the night in this client's Office tonight!  I have my wife run to the store for a 8 GB usb key so I can do a HP ThinState of Capture of the other 5570, working, and we hope to restore this State for this workstation.  Sheesh...

  "HP ThinState Capture from the other 5570" was the answer... couldn't wait for to troubleshoot us it further.

  15 minutes of capture, 20 minutes to install it.

• You try to run the system on my desktop restore encounters a problem with the program looping.

  Original title: System Restore loops

  Hi, I am trying to run restoring the system on my desk is a problem with the program in a loop.  He directs the system restore and then comes back just to start the system again Restore page.  How to solve this?  I started having problems when I have updated the BIOS on my motherboard.  When I installed the motherboard at the start, I think I used the incorrect installation disc (my son has same brand motherboard but the sound is more advanced).

  Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture or
  contact PC manufacturing (see support links below) and order the recovery media.

  Note: Activation is not required when you use the recovery partition or recovery media, but you will need to reinstall all your applications.

  Also to save your documents on external support (if possible) before starting the recovery process.

  Once completed, your PC will be actually in the State when you first purchased it and turned on for the 1st time.

  To access the recovery Partition, start your computer, and then by pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the list below or your user manual for your brand and model.

  If your hard drive has failed, do not have a recovery partition or the recovery partition is not accessible,
  Then, you must contact the manufacturer support team and ask for a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Acer: Press and hold ALT + F10, as soon as you see the logo
  http://Acer.custhelp.com/app/answers/detail/A_ID/2631
  Acer support: http://www.acer.com/worldwide/support/
  Acer recovery support: http://store.acer.com/store/aceramer/en_US/eRecovery

  Advent: restart your computer, then the immediate start by pressing the [F8] key or the F10 key.
  The fastest way to restore your computer is to use the hard disk recovery tools. You can access them by restarting your computer and then pressing the [F8] key or the F10 key until the Advanced Boot Menu appears. Use the arrows to select "Repair your computer", then press [Enter]. Read all of the instructions on the website of advent and made your choice as to the action you want to perform: http://www.adventcomputers.co.uk/restore-or-reinstall-windows-your-computer
  Support: http://www.adventcomputers.co.uk/product-support/support-services

  ASUS: Press or press the F9 key as soon as you see the Asus logo.
  http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&m=X53E&OS=&no=1775
  ASUS support: http://support.asus.com/contactus.aspx?SLanguage=en

  Dell: Press F8 directly after switching on / to start the computer
  Recovering detail instructions:
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
  Dell support: http://www.dell.com/support/home/us/en/19?c=&l=&s=
  Or: http://www.dell.com/

  EMachines: hold the Alt key and hold press and release the key F10
  http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html
  Support: http://www.emachines.com/ec/en/US/content/support

  Fujitsu: Press F8 several times directly after switching on
  https://answers.Yahoo.com/question/index?QID=20110406074143AAcx1Zw
  Support: http://www.fujitsu.com/global/support/

  Gateway:
  http://www.ehow.com/how_6297937_restore-gateway-laptop-factory-settings.html
  https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml
  Support: http://www.gateway.com/worldwide/support/

  HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
  HP Mini: Press F11 directly after switching on / to start the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418
  Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Lenovo uses the F11 key to launch the restore process:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4UFUYK
  Directions for Lenovo OneKey Recovery, hidden partition and recovery DVDs:
  https://support.Lenovo.com/us/en/documents/ht077384
  and: http://support.lenovo.com/en_US/detail.page?DocID=HT077144
  Support: http://support.lenovo.com/en/supportphonelist

  How to run Lenovo Onekey Recovery
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
  Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211

  You can also find parts of this article from Lenovo worth reading:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4VFUDU

  LG: Press F11 directly after switching on / to start the computer
  Support: http://www.lg.com/

  Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
  After the system recovery program has loaded follow the instructions to reinstall the operating system.
  Support: http://www.packardbell.com/index.html

  Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.
  Support: http://www.samsung.com/

  Sony VAIO Windows 7: restart and press "F10".
  https://CA.en.KB.Sony.com/app/answers/detail/A_ID/35585/p/48903, 49902,71663,71664/c/65,67/kw/recovery%20using%20f10
  Sony VAIO Vista: Restart and press "F8" repeatedly until the screen "Advanced Boot Options".
  https://us.en.kb.sony.com/app/answers/detail/a_id/41931/~/how-to-perform-a-system-recovery-using-the-vaio-recovery-center.
  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41949/session/L2F2LzEvdGltZS8xNDA4MjI2NTAzL3NpZC8qWVBPbCpfbA%3D%3D
  Support: http://www.sony.net/SonyInfo/Support/

  Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
  and at the same time, press the button power once to turn on your laptop.
  When the Toshiba screen appears; release the 0 key.
  References: http://www.mytoshiba.com.au/support/items/faq/71
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643
  Support: http://www.toshiba.co.jp/worldwide/

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• Invalid for clock() when values in the main loop of the application

  I wrote the following test code which determines the past values of clock() for every second change reported by time (NULL):

  static time_t   thisTime = 0;
  static clock_t  clocks = 0;
  time_t nextTime = time(NULL);
  
  if (nextTime != thisTime)
  {
      clock_t nextClocks = clock();
      printf("%d\n", nextClocks - clocks);
      fflush(stdout);
  
      thisTime = nextTime;
      clocks = nextClocks;
  }
  

  Normally, I would expect this to print values close to CLOCKS_PER_SEC, IE. 1,000,000.

  However, if I add this to the loop for rendering a applications examples, I extremely wobbly values that are incompatible and far too small.

  For example, I added just after the call to render() in GoodCitizen (like add #include to the top of the file) and got these values:

  10998
  4000
  4999
  2000
  2000
  1000
  1001
  8998
  8000
  5999
  7999
  5999
  12999
  13998
  

  I have the same thing with HelloWorldDisplay and basically everything which uses a loop of events/Blackberry. The applications themselves seem to operate at full framerate (although if the performance were an issue I would expect numbers that were too big, not too small).

  On the other hand, if I wrap while (true) {...}, test code essentially causing the app to hang in a tight loop, I get much closer numbers of my expected values:

  988850
  997848
  993849
  995849
  992849
  990849
  996849
  991849
  987850
  987850
  940857
  975852
  988850
  993849
  

  If something on the Blackberry events/render loop is originally clock() to report incorrect values.

  Can someone explain this? What is the appropriate procedure for determining intervals of a second?

  Thank you

  Dan.

  If you read the clock():

  https://developer.BlackBerry.com/native/reference/com.QNX.doc.neutrino.lib_ref/topic/c/clock.html

  You will notice that clock() measures CPU, not not hour wall-clock-for your process.  This explains why your {} while loop (1) would measure something close to 1000000 microseconds on a 1 second interval, because she is ready to run.

  Your other tests must pass a bunch of times by blocking system calls, which do not count toward time clock() as your process does not in fact.

  If you want to measure wall clock time, use ClockTime() to query the clock CLOCK_MONOTONIC, or something equivalent.  clock_gettime() can be more portable than ClockTime().

  See you soon,.

  Sean

• Hide / Show button at the top or at the end of the form

  Hello

  I have the shape that has 2 buttons, move up and move down, which is used to move the subform upwards or downwards. I currently have to make a message appear: "the current element cannot be moved up" when the user tries to back up this article because they are already at the top of the form

  or "The current element cannot be moved to the bottom" as they are already at the bottom of the form.

  Now, I wish I had a DialogResult.Cancel depend on where the current site instead of the pop-up message.

  Can any advise please.

  Thanks in advance,

  DAO Han

  Hello

  Here is the form to the you: https://acrobat.com/#d=tO5CEU86 * 5yBXTFDilpg.

  There is script in the layout event: loan which was not necessary and this causes the loop.

  Also, I modified the structure slightly, Question number script and added a line of execEvent() to the click event of the button Add. I'd be careful to use names that can be reserved.

  Hope that helps,

  Niall

• Background video menu with buttons on the top

  Hello.

  I am trying to create a menu that has a video experience in a loop with the buttons on top of the video.

  I created a short, empty a video 1 min in the body and matter in the background of the menu by first creating a menu, then alt/slide menu empty.

  When I place a button on top of the video, the video plays more.

  Can I do so that playback of the video in the background and the buttons on the top is active?

  Thank you

  David

  I do not see, but I wonder if you need make your menu.  (File-> Render)

• Strange thing during manufacturing to the top

  I have the latest version of itunes in my PC and the latest version of iOS in my iPhone and when I connect my phone with my PC it starts to escalate i.e. I see backup bars etc, and it takes a while as its makes it to the top, but nothing is stored in my PC, it is not about my iPhone is back in my PC No Apps, Photos, or music stored on my PC, I went through C:\Users\username\Music\iTunes and this is the only file of 100 MB and I have more than 40 GB of data in my iphone, means there is no return upward in fact

  See the section 'Find backups in Windows 7, 8 or 10' in:

  Find backups of your iPhone, iPad and iPod touch - Apple Support

  BTW, a backup does not include the Apps or music.  (It does, however, include photos)  For music & Apps you synchronize your device with iTunes - a separate step to backup/restore.

  Sync your iPhone, iPad or iPod touch with iTunes on your computer via a USB - Apple Support

  Sync your iPhone, iPad or iPod touch with iTunes using Wi - Fi - Apple Support

• How to restore the calculator application to drag it to the top of the screen to control

  Can how I restore the calculator to drag it to the top of the screen to control center? It seems to have been removed from the bottom row? Thank you

  Are - what you got to remove the calculator of your applications on the phone? You can find the calculator on the phone itself? If you find it, then try a reset. Hold down the home and sleep/wake together until you see the Apple logo and then release. The phone will restart. There are no settings to change what appears on the display. See if the reset solves your problem.

  EDIT: what exactly you see in the Control Center? If you see only controls the music, then drag to the right to see the rest of the access to the control center.