The triggering event programmatically

Similar Questions

• Relaxation/simulate Click event programmatically via ClientListerner

  I managed to get a reference to an element of the ADF by following the documentation. What I am now struggling with is to trigger the click event programmatically on this component.

  The source code is as follows:

  ADF

  < af:panelAccordion discloseMany = 'false' id = 'pa1' >

       <af:showDetailItem id="pane1" text="Panel Label 1" disclosed="true">
        <af:commandButton text="commandButton 1" id="cb1">
               <af:clientListener method="showNext" type="action" />
        </af:commandButton>
     </af:showDetailItem>

     <af:showDetailItem id="pane2" text="Panel Label 2">
        <af:commandButton text="commandButton 2" id="cb2">
             <af:clientListener method="showNext" type="action" />
        </af:commandButton>
     </af:showDetailItem>

     <af:showDetailItem id="pane3" text="Panel Label 3">
        <af:commandButton text="commandButton 3" id="cb3">
             <af:clientListener method="showNext" type="action" />
        </af:commandButton>
     </af:showDetailItem>

  < / af:panelAccordion >
  

  JavaScript

  function showNext(evt){  
   var src = evt.getSource();

     var showDetailItemNode = src.getParent(); // targets the showDetailItem node in which the button resides  

     /* how do I simulate the click event of this object? */

     /* For example: If button #cb1 was clicked, it should simulate clicking of the showDetailItem #pane1 */
}

  
  

  Use cases

  When a user clicks on a button (which is inside the showDetailitem), the parent panel collapses and the next panel must open upwards. The button is just another way to trigger the Panel click behavior.

  
  

  jDeveloper Version

  11g
  

  Thanks for the suggestions guys. The only reason why I use javascript is because I have virtually no knowledge in JAVA/Beans. I am more a guy script and therefore wanted to achieve the same using client-side scripts instead of having to go to the side server.

  in any case, I managed to solve it, but I had to take a different route. What I did was the target node parent of the button, and then set its property disclosed to false.

• How to raise a component via the script event

  Hi all I have a DateField in which a whole text with the text property, and I want to raise the CalendarLayoutChangeEvent event programmatically via script code.

  How can I do?

  Thank you.

  try - new CalendarLayoutChangeEvent ( parameters here) instead of the event.

  Kind regards

  Select this option.

• Event generation of click for the Run button programmatically in LabVIEW User Interface

  Hello

  I use the user interface of LabVIEW Simple (Simple OI - VI.vi first level) for my application teststand with small changes. Here, I don't want to click the button run every time. Generate the click event of the Run button (which tringgers the TS gear) by programming the interfacr VI user or is there a method for tringger TS gear?

  More information:

  LabVIEW worm: LabVIEW 2010

  TestStand worm: TestStand 2010 SP1

  My sequence Run point enry's 'Test DUT'

  Thank you

  Alaka

  Hi Adarsh,

  There's a DoClick method for the TS user interface buttons! Just wire the ref button to invoke node and locate the DoClick method.

  Kind regards

• QML: calculate the time interval between the touch events

  I create a custom button that is activated by a key event, in this way:

  Container {
      property bool pressed
      signal clicked...
      onTouch: {
          if (enabled && ! event.isMove()) {
              if (event.isUp() && pressed) clicked()
              pressed = event.isDown()
          }
      }
  }
  

  The problem with this approach is that if the user clicks the custom button several times in a short period of time the click signal is triggered several times too. This does not happen if I use a regular button or an ImageButton.

  I was thinking about getting the timestamp of the event and fire the only if clicked event grit touch after at least x milliseconds since the previous event. The DIF is that I couldn't find a way to calculate this difference in QML.

  Any suggestions?

  You could also follow the time of the last event with the Javascript date.

  lastTouched = new Date().valueOf();
  

  -Check if time has passed...

• Windows connection problems and "Windows could not log in the Windows Event Service.

  September 14, 2014, I installed the hotfix for Windows (KB2590550).

  When I try to log on to a standard user account (not Admin), I would get an error that might say something like "Windows could not connect to the Windows Service Service event".  I click OK and then get a totally blank screen showing on the arrow of the mouse (which can be moved).

  Around this same time, when I was able to connect, I got a "not genuine Windows" pop up.  My windows 7 came factory-installed by Dell (Dec. 2011) and I got no re-imaging, re - install or repair since I got the computer.  I've also been running Symantec Endpoint Protection (version DoD) for 2011 as well.

  When I login as administrator (different account), I get an error "Failed to connect to the Windows Event Service" or something like it in a control bar bubble popup.

  I studied the Knowledge Base, and he said to apply the patch to KB2590550.

  Since then, the question is still common and works (sometimes) when I reset the password for the standard user.  In addition, all updates of the operating system, patches, etc. have failed since then.

  Now, I get occasional blue screens immediately as windows starts to load (just after the initial windows graphics) which triggers a reboot.

  Service Pack 1 is installed.

  Help, please!

  Hello

  Thank you for the update on the issue.

  If the problem still persists I suggest to run the SFC scan to check the integrity of the system and see what it finds.

   

  The sfc/scannow (System File Checker) command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  We can check & repair missing and corrupt files by the following article in the Microsoft Knowledge Base.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:

  sfc/scannow

  
  

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Get back to us with the result of the analysis so that we can offer you additional troubleshooting steps.

  Kind regards.

• User of BB audible alert on the web event

  Hello

  I have a problem that probably needs a Java of BB application to fix but would like confirmation before I dig in - development of BB is new to me.

  I run a web page accessible via the BB browser to warn drivers of trucks of changes to their itinerary (new stops to make, etc.). This works very well, but requires the driver to see the page at regular intervals to ensure that it did not miss all the new events. To avoid this, I would like to generate some kind of audio signal whenever new events occur.

  From what I see, there is no way to do this via the web application, javascript support BB being what it is (feel free to correct me on this). Send an email or an SMS is not acceptable because of possible delays. It must be in real time. Rattling of the people through BB Messenger is not an option either because I can't do it programmatically (and Yes, I know web2pin but there is a significant delay there as well).

  I think to do is:

  1. server-side: expose a web service doing nothing more that inform a driver of new events require his attention.

  2. client-side: run a small application of BB that periodically checks the web service and beeps/rings /... as soon as new events are present.

  It would be the best way to go about the generation of my audio signals in real time

  More than two notes: I want to steer clear of any solution which requires additional software (expensive) must be installed. And I'm not fussy about the kind of audio signal. It may be a ringer, integrated signal, custom mp3 sound which is easier to implement.

  Thanks for the pointers you can give me!

  What you describe is possible on a BlackBerry handheld.  If you do not have a web service for your application already, you can avoid this additional overhead and have the BlackBerry app just to read a page of data from your web server.  As do a HTTP connection to something like yourserver.com/driverPages/getRoutes.php?driverID=1.  It is too simplify the URL, but should give you an idea.

  What is a consumer application accessed by several companies or an Intranet application?  If it is an Intranet application that has access to BlackBerry Enterprise Server to the pilot, your request may push data to drivers in real time when a route has been changed.  It's more effective (do not turn on the radio to query for updates) and provides updates in real time.  You can read on push here:

  http://NA.BlackBerry.com/eng/deliverables/5820/Creating_applications_for_pushed_content_509043_11.js...

• How can I trigger an action on the click event of wheel with ApplicationMessages?

  Hello world

  I've recently implemented ApplicationMessage provided for JDE 4.6.0. It allows developer create custom messages in the global Inbox of messages about its application. It works fairly well but I threshold have question though: when I click on my ApplicationMessage in overall Inbox of messages I get this pop-up: 'no messages not configured service. "You will be able to save draft".

  I want to trigger an action (updates my request on the foreground for ie) on this event and prevent this pop-up to appear. I have not found a way to do good.

  Somone have never worked with ApplicationMessage and managed to trigger an action on the click event of wheel?

  Thanks in advance.

  PS: A less important but another question: my ApplicationMessage time in the overall message Inbox is displayed this way: 10:... instead of 10:45 for example. And yet I didn't understand what was the reason of this bad view (it seems that the date is too long or something).

  I thought about it: you must register at least an ApplicationMenuItem for your ApplicationMessage, the action triggered by this menu item will be the same if you click your ApplicationMessage with the wheel.

• IP address conflict? How to solve this problem. Message on the screen. go to the system event log window.

  Next message on the screen for IP address conflict. There are two addresses. How to solve this problem. Message to say go to the system event log window. I can't. Pl help.

  A common situation that can lead to a conflict of ip address, it's only 2 (or more) computers or other devices are connected to the router (via ethernet or wireless), and both have ip addresses assigned by the router automatically, one of the computers, then past in mode 'sleep', and while we sleep the router restarts.  When the router comes back online he doesn't know the computer sleeps is here and that he already has an assigned ip address and so it gives the ip address of the other computer.  When the computer asleep wakes duplicate error will be triggered.  It can be solved by turning off computers and turn it back on so that the router will assign them new ip addresses.  If this is not what is happening in your situation, the following may help: http://windows.microsoft.com/en-US/windows7/Get-help-with-There-is-an-IP-address-conflict-message

• Security-SPP in the Application event log

  Hello

  
  Since we installed the Agent Mirage to the Windows application log is filled with entries 'Security-SPP.

  I stopped the Service of Mirage and the flooding event log stopped also.

  Any ideas why this happens? Or someone at - it same problem?

  Thanks for your help.

  
  Cordially Sébastien

  
  

  Hi Sebastian,.

  The client of Mirage periodically polls WMI for Windows license information.

  This WMI query triggers an event log message. Because the Mirage makes this request every X minutes, you have more of these events in the event log.

  However, this event log is a log of the information only events. Although it appears several times, it indicates no problem with your machine.

  We already have an open problem on this in our backlog for fixing this behavior, I hope that this correction will be introduced in future releases.

  Kind regards

  Tal

• The dynamic tab programmatically (jhsDynTabContext)

  Hello!
  In our application, we are using JHeadstart 11.1.1.3. Dynamic tabs are enabled by using jhsDynTabContext, bean (class oracle.jheadstart.view.dyntab.DynTabContext.java).
  I'm trying to open a dynamic tab by program and I need to call DynTabContext.getCurrentInstance () to get the context of the tab to open a new tab, but the method returns null. How is it?
  I went to see the code and he's trying to get through the expressions ' #{viewScope.jhsDynTabContext} "or" #{pageFlowScope.jhsDynTabContext} ". Where and how can I set them? Or what is the most common procedure by opening the dynamic tabs programmatically?
  Best regards, Marko

  Marko,

  Indeed, my fault, the jhsDynTabContext is stored in viewScope.
  However, another approach could be much simpler to implement.
  JHeadstart is supported by a dynamic tab open of in another dynamic tab using an object with display type groupLink and the 'Show Linked Group In' dynamic 'New Tab' value

  I don't know exactly your use case, but if he really needs to be done by programming, then you can apply the same technique as we do with the Group link:
  -set the name of the taskflow which must be opened in new tab on the successful jhsDynTabLauncher bean (defined in the TF model)
  -move the jhsDynTabLauncher to the parentContext
  -use the result of the "LaunchTab" action, this triggers a parent (also defined in the TF model) action picked up in the taskflow boundless that launches the new tab using the now available in the parentContext jhsDynTabLauncher.

  Steven Davelaar,
  JHeadstart team.

• link to the onChange event?

  I have a text field whose value can be modified programmatically by a javascript function

  I have a second field, bound to a cfc, pass the value of the first field to the cfc function

  This works, but only onBlur and onKeyup, how can I do this work based on the onChange event of raw material, i.e. when my JavaScript function changes the value in the first field, pass this value to the bound field and get the result? something like onChange = ColdFusion.secondField.refresh

  < cfform >

  < cfinput type = "text" name = "firstField" value = "fromJavaScriptFunc" >

  < cfinput type = "text" name = "secondField" bind = "SWC:myCFC.myFunc({firstField@blur})" bindOnLoad = "true" > "

  < / cfform >

  Thank you

  I think I got it, but it's sort of undocumented. my js function, I add this call at the end:

  ColdFusion.bindHandlerCache ['mySecondFieldID'] .call ();

• Problem led the TweenEvent event.target

  Hello

  The logic of the code is as follows (pseudo):

  function X {}

  switch

  (1) tween1-> tween finishing launch onTweenFinish();

  (2)-> finishing launch onTweenFinish() tween tween2;

  (3) tween3-> tween finishing launch onTweenFinish();

  ]

  and now AS3:

  int onTweenFinish(e:TweenEvent):void

  {

  trace ("Motion event triggered");

  trace (e.Target.Name);

  }

  results in: ReferenceError: Error #1069: the property name not found on fl.transitions.Tween and there is no default value.

  What I want is to treat all the interpolations of three in one function, but I need to know what tween it was. It is of course possible to make three separate functions, one for each tween, but it's just not good.

  Any suggestions?

  Thank you

  Maxim.

  You could test to see who it is...

  function onTweenFinish(e:TweenEvent):void

  {
  if(e.currentTarget == tween1) {}
  trace ("tween1 triggered event");
  } else if(e.currentTarget == tween2) {}
  trace ("tween2 triggered event");
  } etc...

  }

• Extend the rights of the player causing the Initialize event of draw twice?

  I have a few boxes, populated by scripts on their respective initialization events. Everything worked very well through development - except when I took the form of a group, I noticed that the drop-down lists were filling twice. I didn't was not using a clearItems () - should not need, right?

  So, it was something that I couldn't reproduce in decorator. Once the extended rights had been removed, the form executed as provided in Acrobat and Reader, too. Put the extended rights, and drop-down lists are double to fill in again. Take off extended rights, no misconduct, everythings fine. Extended rights on, bad dog no biscuit!

  Now, obviously I can get past this by using clearItems(), or by moving the preOpen scripts. However, I would like to know what the heck is the cause? Is this a bug? a known issue? or is it something caused by something in the form? I always assumed forms behave the same with or without extended rights. But it looks a lot like the Initialize triggers event twice when opening with extended rights.

  Any ideas out there?

  Thank you

  Stephen

  Hello Stephen,

  I encountered this before and thought that I had an "appropriate" response, but I'm not. I think that when player allowing the rights are applied by Acrobat form performs a check as part of the logon process. There seems to be a bunch of events that triggered twice when the form is active player (in Acrobat - I can't test if the form is activated in LC RE ES2).

  Here is an example showing how, when and in what order, events fire.  The form is at the end of the post (at http://cookbooks.adobe.com/post_How_often_events_fire_and_their_sequence-16547.html). There are 13 items in the form, the events are followed.

  When the form is not activated start looks at this (some events fire once as expected):

  

  When I apply the reader by activating rights via Acrobat, triggering events double for:

  • commissioning;
  • form: ready;
  • layout: ready
  • IndexChange;
  • docReady.

  

  An indicator of potentially, what happens is that, in the RE version, the preSave event fires (but not postSave event).

  Not the complete answer - just an indication.

  Good luck

  Niall

• GUI - how to block the execution of the parent event handler

  Hello

  IM learning flex, I did my first http://www.narutogis.appspot.com/ app and have some problems with the events of the controls.

  my application is composed of canvas (as a parent) + 4 buttons + image (svg) and now:

  • When I click on one of the 4 buttons as their 'click on' events are triggered, but after that it also runs 'click' event of the canvas parent. I don't want this feature can I block sort of parent controls event handlers. SImple click on the button must execute only the button ' click on ' event, nothing more
  • When I click on the image it won't run "click event" canvas parent (reverse situation to that at the top) by clicking on the Image cntrol must execute the 'click' event Image and also parent canvas 'click' event
    

  You probably need stopImmediatePropagation()

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=events_08.html

  If this post answers your question or assistance, please mark it as such.

  Greg Lafrance
  www.ChikaraDev.com

  Flex development, training and Support Services