the uefi BIOS update

Similar Questions

• Since the update by Satellite L750 - Win7 for Win10 I lost access to the UEFI BIOS)

  Hello everyone

  Since my upgrade to Windows 10 32 bit Windows 7 32 bit, I am unable to access the BIOS (UEFI).

  I try to access BIOS because I want to do a clean install of Windows 10 64-bit, DVD, or USB key.

  I did the setting-> security update & -> Recovery-> Advanced Startup restart now-> then I clicked on troubleshooting-> Advanced Options-> and I can not find the UEFI (BIOS) settings.

  When I start my computer I lost the option "Press the F2 or F12 key" to access the BIOS.

  Thanks for your help.

  My computer: Satellite L750, PSK2YA-0L0802S

  OK if you are interested in the topic you can try with a facility for testing purposes, but if there are many different issues and problems, I think that you should install the recovery original image again and use your laptop with 'presets' again.

  You can enter the BIOS settings?

  In General, you can try to start the installation of USB if you press F12 on startup and choose USB as a boot device. It works for you?

• ThinkPad 13 - cannot enter the UEFI BIOS without entering the W10 first

  I have a brand new 13 Thinkpad which I'm really pleased.  However, the user manual seems to be wrong.  I can't enter the UEFI BIOS in F1.

  It seems that the only way to get into the BIOS is first go to W10 and make a shift/reboot or a restart/F1.

  OK, suppose that at some point in the future I need to access the BIOS (ex: changing boot options) and is not a job W10 or perhaps corruption W10.)

  How to enter BIOS without first W10? BIOS maybe consulted independent of the operating system?

  Hello and welcome,

  It is by design.  "Shutdown" in Win 10 more resembles the hibernation and it is not safe change hardware/BIOS setup in this State.

  F1/F12/ENTER should be available after a boot failure or a forced shutdown via a long press on the power button.

  BTW, UPDATE/restart and restart should just do the same thing. SHIFT button should cause a real stop after a followed Fx market should work.

  Z.

• Downloaded the wrong BIOS update

  Hello, I'm val. It's my pc, http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5071... I downloaded updated bios wrong, H-RS880-ΜATX Motherboard BIOS update which I discovered that my mother board need to update BIOS of motherboard of N-Alvorix-RS880 and I am on this computer now it works very well the only difference I noticed is after I started my computer and log I get a black screen for a while until Windows explore lights, which takes more time to do this, I usually start to the top of the Explorer windowse myself. whenever I'm trying to download the N-Alvorix-RS880 motherboard BIOS update it gives me the bios image 252 error code is invalid or damaged. I have no idea of what having the wrong bios update will do to my computer but I keep my computer on at all hours of the day. I've been looking online and I see computer most people becomes useless and I wonder why mine is not useless, but in any case I hoping to get help, please save me to things I am aware of a .

  Hello Valentink,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you believe that you have installed an incorrect BIOS update on HP Pavilion Elite HPE-510y desktop PC. I checked and the two BIOS updates you link to are for your computer, the only difference is the version the update of the BIOS of motherboard ΜATX-RS880-H is Version 6.11 Rev has what is more recent, then the N-Alvorix-RS880 card motherboard BIOS update which is Version 6.07 Rev A. You cannot install the second update is because the you have a more recent version.

  I wouldn't worry have the incorrect BIOS up-to-date is one you have for the computer. As you can see on the page the two updates BIOS Drivers of HP Pavilion Elite HPE-510y desktop PC are listed for your computer.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!

• Spectrum of HP: Cannot install the latest Bios Update

  I get the following error message when it installs the update to the Bios: C2-error: area is write protected

  Someone knows how to fix this?

  Hello

  Thanks for posting in the HP Support forum. Welcome aboard!

  How about trying to update using the USB in the BIOS/UEFI > > http://support.hp.com/us-en/document/c00042629/ ?

  You can also check this > > http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/SOLVED-Can-not-update-Bios-Probook-640-G2/m-p/5683581#M446920

  ========

  Some notes - as mentioned in the article itself - updated only if you really must. Personally, I don't recommend do you it unless you're having problems with your existing BIOS and you are sure that the new BIOS will fix it.

  General recommendation I provided to users/customers is NOT to upgrade the BIOS/UEFI, unless they live any sort of BIOS/UEFI problem specific. Just for updaing and update just for the use of the latest verson is not the solution. Any type of update (no matter what and that relesed it) can solve 2 problems but could introduce more than 10 questions. In addition, upgrading the BIOS (for any provider) are risky more because the BIOS recovery is not that easy compared to updates of typical software IF something goes wrong.

  It goes the same for Windows updates, OS update, drivers, etc - update/update updates IF you have any questions, you know are fixed in the new version or for some serious security problems. Otherwise, keep the existing version as long as possible.

  I hope this helps! Let me know if you have any questions or if you have difficulties

• Re: Satellite Pro L40 - killed the laptop BIOS update

  Recently I thought it would be better to download the latest drivers and upgrades for my Satellite pro L40 to keep up-to-date and partners the laptop that works smoothly. I couldn't have worse summer. Before I updated the new driver updates I thought it would be a good idea first update the Bios. So I downloaded the update of the Bios on the Toshiba site, unzipped the files and followed the online instructions for updating the BIOS. I double clicked on the BIOS file to run the update, the laptop says it was end the session, I waited and the Toshiba logo screen came. In the instructions, it says that I have to press F2 now and confirm that the date and time are correct. I should then press F9 to load all the default values and then press F10 to save and exit. At this point, the laptop must away to the loading screen, but... I got a black screen. IV turned off the computer and turn it back on, but still, I get a blank screen. The lights are on but know one's home.

  Could a mod/staff/Board Toshiba administrator please explain to me why I'm going to draw the consequences of my lack full on my face because I followed a form of direct teaching of personnel of Toshiba or... Please run me through the process of bring back my cell partners in life, before that I get my Crown snatched jewels. This isn't a laugh. An upgrade directly from the manufacturer is not intended to cause you problems!

  Please get back to me as soon as POSSIBLE. My first son moments of life (videos, photos) are on this laptop. That cannot be replaced. Please tell me that the laptop can be fixed...

  Hello Durks

  I'm really sorry to hear you I have this problem.
  To be honest, it is not easy to discuss about this because a lot of people on this forum with a similar or same problem reacts quite aggressive if they don t hear exactly the thing they want to hear.

  In any case, I just want to write my comment. Don t be worried about photos and other important data. You can remove the laptop HARD drive, put it in a small box of HDD SATA 2.5 and connect the HARD drive to the other PC / laptop as external device. You will have full access to all stored data. So you can do the backup.

  Update the BIOS.
  What to say at this point?
  I have checked the Toshiba download page and saw that the BIOS update is available for Windows XP Home edition and Vista pre-installed notebooks so I hope you ve chosen the right one. Anyway, it is not easy to fix screwed up in the BIOS. You hate me now, but I think you should contact the nearest Toshiba service provider and ask for help. Call them, explain the situation and ask what you can do about it.

  I hope you will fix this laptop soon.

  Good luck.

• Satellite L40 - 14 H - do not start after the successful BIOS update

  Hello

  I have Satellite L40 - 14 H which was working fine until I thought to an update of the BIOS will not hurt. Seems I was wrong.

  I downloaded the update to the BIOS, it unzipped in a folder and started the action.

  After a few seconds was asked to wait, and then after few more firm.

  After the reboot, I pressed F2 to enter the BIOS and check that it is version everything was fine, version 2.0 so was I left once the parameters.

  After that, nothing happened.

  I almost tried everything without success. Removed the power and battery power, put their back, but still no start. Just the light of the HARD drive lights up for a few seconds and the cd turns a bit, but after that nothing happens at all and completely the screen is black.

  I don't know anything else to try.

  Please let me know what that can do to restore its functionality without taking it to the service, I can't do it.
  I think that may not be cause of failure of the BIOS update I have seen it is the version and was right.
  Is it possible to reset the BIOS? I need to disassemble the laptop to do this?
  Let me know what to do, I have good experience in such things, but I can't understand this.

  Thanks in advance for any response.

  Kind regards
  Stefan

  Hello

  I agree with Akuma. It really isn't that you can do about it. BIOS problems are complex and cannot be set by the owner of the laptop. Believe me you need professional help with this.
  Contact the closest Toshiba ASP and explain the situation.

• Satelite P300 does not start after the failed Bios Update

  Hello world

  I tried to update the bios of a P300 to this:
  18/03/10
  Update the BIOS
  Toshiba Windows 7-32 Bit 4.20 - WIN32 World Wide
  That I downloaded here: http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK after entering my laptops specs.

  The process flash hanged during the update and the laptop became screen starts, blank when turning on and nothing else...
  I tried to use the Phoenix of emergency crisis, created a diskette with the file Bios image that I downloaded but nothing succeeded.

  Access to the floppy drive USB floppy when you enter the recovery mode, I hear the beeps that indicate that a process is carried out, but when everything stops and restart... the problem remains.

  -Does anyone have a clue what to do next?
  -The warranty is void after a bios update attempt?

  Thank you for yor time.

  > - Someone at - it an idea what to do next?
  Well in this case, you will need to contact a local ASP (Toshiba authorized Service Provider).
  Guys could clean CMOS and flash the BIOS ROM module with a BIOS disk special crisis

  You will find here all the FSA all over the world:
  http://EU.computers.Toshiba-Europe.com-> support download &-> locate an authorized Service partner

• Satellite A100 does not start after the wrong Bios Update

  Yesterday, I upgraded my BIOS of 1.90 to 2.20 for VISTA... now, apparently, I downloaded the BIOS bad a100 to my A100 (PAAS...)

  Now the computer turn on (no display) then a few seconds later stops offshore and turns on again (without interruption), I am under warranty (and the computer is in the store) but I was wondering what to do if Toshiba is not honor the warranty?

  Thank you very much for your help!

  Hello

  I'm sorry to say, but it seems that you don't have the choice.
  You can ask him authorized partner in your country for the help that I know, BIOS update errors are not covered by a warranty and you will have to pay a small fee for fixing.

  In the worst cases, the motherboard must be replaced:(mais peut-être avez_vous une évasion chanceuse et seulement la puce ROM doit être flashée à nouveau)

• the Z560 BIOS UPDATE?

  I wanted to ask how necessary is updating the BIOS. The latest available bios is v2.15. I checked mine is v2.07. I would like to point out that my laptop is good and right in the face of some heating problems, including playing games.

  The configuration of my laptop is

  Z560 model name: 20060. General specifications are

  i5 - 450 M - 2, 53 GHz

  NVIDIA - 310M - 1 GB

  RAM - 4 GB (but only 3 GB used because the OS is 32-bit)

  OS: WIN 7 32-BIT HP

  Download page for history of changes on BIOS

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS008928

  29CN38WW

  Fan fixed, always running after waking from sleep

  29CN37WW

  Active sensor button function on NIWE1/NIWE2

  Sensor fixed unable LED car turn at 50% lighting before activation

  29CN31WW (V2.08)

  1 update the VBIOS GE1 NV to solve the problem of black screen.

  2 disabled LAN DSM to peripheral occasional difficulty lost LAN function.

  29CN25WW (V2.02)

  1. According to the old version, updated the BIOS in Windows mode when the system resumes from the State S3 causes system hang and display to turn black. The new version will solve this problem.

  Not apply to heating problems.

  Safer to leave it as what?

• HP Pavilion dv7 - 6143cl: UEFI BIOS update for Pavilion dv7

  Hello

  I wonder if there's a UEFI BIOS available for my laptop. I have a HP Pavilion dv7 - 6143cl. The BIOS that is currently installed is F.1B Rev A.

  Thank you!

  Hello

  Unfortunately there is no - F.1B Rev is the latest version of the bios listed for your laptop.  As a general rule, the bios versions uefi began with the dv7-7xxx series.

  Kind regards

  DP - K

• The downloaded BIOS update, do not know if it has been installed, update view has not changed.

  HP Support Assistant informed me that I have to download an update of the BIOS. After downloading and restarting the laptop, notification to download the update of the BIOS is still there. Tried redownloading but this time to stop the power of 10secs then turned on, but the BIOS update notice always there. After research on the HP site, found a note saying that I shouldn't update my BIOS unless there is a problem.

  The update is? Should I just ignore the update?

  Thank you!

  Hi @RobMan

  Welcome to the Forums of HP Support!

  I understand that you have found a message asking to update your BIOS to the support assistant and that you downloaded it, but the message remains. I'm happy to help you with this.

  First of all, please send the complete product number and check the operating system on your laptop. See the following if you need help to find those.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  It is not absolutely necessary to update the BIOS if you encounter any problems with something on your system. Once I have your product information, I can find the right drivers page, and from there we can find out which BIOS versions are available and notes see what corrections or changes are a part of it.

  I have this also, include indicative.

  With the help of HP Support Assistant (Windows 8)

• HP Jet 7 - has crashed and now stuck on the screen "the HP BIOS update.

  "bought this tablet for my MOM as a birthday present on Sunday, February 28, 15 and now not even a week later the * beep * thing is stuck on the update of the HP BIOS" screen... what the f is this

  The solution is here, you need to run your battery all down until it resets the CMOS.

• The HP BIOS update seems to have caused havoc with my laptop HP G62

  After him have updated software for my PC BIOS of G2-244 HP laptop usb mouse doesn't work.  I checked Device Manager and all the USB ports seem to be defective with a "!" triangle icon next to them.  When I ask to check the drivers of these ports, the device manager tells me that the drivers are current and good.  Anyone else had problems with the recent update of the HP BiOS?

  I also tried to reinstall my old BiOS version (online successfully) but no change to the usb port is port problem

  You will need to reinstall the original chipset drivers.

  Go to the Start Menu -> click on all programs ->, click on manage recoveryr (open Recovery Manager).

  From there, under "I need help immediately" you can select "Hardware Driver réinstallation"-> click Next.  When you see the list of available selection drivers "ATi (or AMD) Driver VGA" and click Next.  Once it's done, click on finish, then will restart your computer and you can test your system/USB devices to verify that it is fixed.

  If it does not, meet with your specific model number or PN (product number).