The unspeakable

I will say first of all it is a Motorola employee (if so Matt) is not MotoXprt, no offense to you all, do you great things here... but my question requires motorcycle.

Next thing, Yes, my device is rooted (a kind of evil music should play here... do it yourself if you want to) and since I have an upgrade in a week entry I thought that it time to go custom ROM (* ducks to avoid lifting opponents fodder *).  This coupled with the sudden demands of Motorola to embrace developers gave me a little hope in them again.

So all the drama out of th, the question.

Why isn't Bike after developers with job offers, or at least a short-term contract for the patches to people like Jrummy and P3droid?

Just a quick note Jrummy has a ROM that cleans most of the problems the last patch missed... This is why I ask.

The major complaint with Android's speed of patches... and these guys in the community could be the solution.  Talking about talented people who, given the right device built their entirely own versions or Roma.  Certainly the X is locked down to something similar to what did the kaos on the Eris... but with this news we like devs handed sheet I can't remove my new no motorcycle devices notice... yes I can keep my X now that I made the leap into the world of custom again ROM. At least until a caliber of bike developer device came out (Yes also the dual core / 4G).

Please open device notice stay off this thread anti I know that your comments and reflections already.  Do not agree with them, you do not agree with mine.  So no need to even bring here.

Personally, I have no objection to the root - go have fun. Just keep the excessive discussions of it and all the links to the information on it, out of this site. Provide advice, what to look for, etc. If people want to, they can easily find it on many other sites and we do not encourage it.

With regard to the suggestion that we recruit third-party developers - how do you know that we are not?

I would also like that there is a big difference between development of the Roma for tens and hundreds and do the same for tens of thousands and millions. Often there is indignation when we publish a new load of software and something goes wrong with it. And of course, we tested the heck out of it, but the problem did not show up until it is the very large number of devices. I don't think it's fair to compare the two activities, really. I can make a pretty good meal for eight, but could be a failure total cooking for banquet with 1,000 people.

I know that these independent developers are immensely talented and I did not intend to suggest otherwise. I'm sure they have a lot to offer. I only point out that we are talking about two very different activities.

Finally, we do not like to announce release dates because you never know exactly when an update will be final. It's pretty simple. Let's say that we plan to release an update in 10 weeks. We develop and test updates code as much as possible in the time available. The complexity increases geometrically as you add the code, then it becomes more difficult to add things after a time. So maybe at this point, you are not adding but swapping instead. This means that the update is not completely defined until it is really over. Then, it must be tested and approved. Maybe something is wrong in the tests. Then you must either remove this piece of code or the repair, but in any case it will need to be retested. If at the end of 10 weeks, you still have hurdles to clear in order to release.

There is even more. The update could be done, but there may be other updates for this carrier already underway or in preparation, he must get in line - or maybe you get bumped in favor of the other.

It is a very simple view of something much more complex. I guess my point is that things are often more complicated as they seem.

In any case, to resume the main points: have fun with the ROMA, but elsewhere; third-party developers have something to offer for sure, but nothing more to say about it now; software updates continue to grow so stay tuned.

Tags: Motorola Phones

Similar Questions

  • 1parent the nested child w/4 < div > < div > last 2 move in fire fox not IE7

    I've done the unspeakable; I slit images in ps4 transported to DW4 cut out pictures inserted div tags parent for the editable as, flash file and the text. Everthing for the flash worked fine.  All the following code worked well: < div id = "title" > welcome < / div > < div id = "body_txt" > thank you forcoming < / div >.   I tested this Fox of fire and Explorer 7 and everything was beautiful.  I thought that I was in charge!  Then I inserted two more children < div > tags with separate CSS rules in the same division of parent I tested then in IE7... everything was great... then tested in Fire Fox (FF) and the last 2 moved to the top.  It seems that there is a space between the child divs, which can be compromised with firefox or there is some unknown padding going on in FF.   I've attached screenshots of IE7, FF and DW4... My code base below:

    Parent < div >

    {background

    background - image: URL(images/index2_04.jpg);

    Width: 427px;

    height: 413px;

    margin: 0px;

    }

    Child < div >                                                                                         

    #text {}

    text-align: left;

    do-family: tahoma;

    font size: 24 PX.

    make-style: normal;

    line-height: normal;

    make-weight: bolder;

    do-variant: normal;

    padding-left: 90px;                                                                    ;

    padding-top: 10px;                                                                                         ;

    }

    Child < div >

    {#text_body}

    text-align: left;

    do-family: tahoma;

    font size: 13px;

    make-weight: bold;

    Color: #000;

    padding-right: 10px;

    padding-top: 0px;

    padding-bottom: 0px;

    top: auto;

    margin-top:-10px;

    }

    Child < div >

    {#small_title}

    do-family: tahoma;

    do-size: 18px;

    make-weight: bold;

    color: #FFF;

    text-align: right;

    top of the margin: 28px;

    padding-right: 80px;

    }

    Child < div >

    {#smallbody_text}

    font size: 13px;

    make-weight: bold;

    text-align: right;

    do-family: tahoma;

    Color: #000;

    top: auto;

    padding-right: 20px;

    padding-top: 0px;

    padding-bottom: 0px;

    margin-top: 0px;

    }

    < td > < div class = "background" >

    < div id = "big_title" > welcome to our site / < d >

    < div id = "text_body" > < p > jkl klj; jklj; j < /p >

    < p > jkl; j; ljljkl;.  & service; & nbs; & gt; & gt; < a href = "index1.html" > more < /a > < /p >

    < / div >

    < div id = "small_title" > 5 easy steps < / div > < div id = "smallbody_text" > jkljkl; JKL; jklkl; jkljkl < br > jkl; JKL; < / div >

    < / div > < table >

    Variation of browser comes with the territory. A trick I use is to reset settings to default browser on everything with a universal selector (*).  Then manually add line-heights, margins and padding to the individual if required selectors.

    CSS:

    / * zero default browser settings * /.

    * {margin: 0; padding: 0; line-height: 100%; do-size: 100 %}}

    {p}

    line-height: 1.5;

    do-size: 1em;

    color: #FFF;

    margin-bottom: 1.5em;

    Padding: 12px;

    }

    H1, h2, h3 {margin-bottom: 1.8em; padding: 12px ;}}

    Nancy O.
    ALT-Web Design & Publishing
    Web | Graphics | Print | Media specialists
    www.Alt-Web.com/
    www.Twitter.com/ALTWEB
    www.Alt-Web.blogspot.com

  • Locate the temporary workspace on a MacBook Pro

    Hello-

    I have a MacBook Pro bought recently which has been partitioned in Mac OS and Windows. By running software on the Windows side, I realized that I don't know how to locate the temporary workspace on this machine. In other words, on a Windows PC, there are files named 'Local Settings' and 'Temp' in which is placed a temporary storage.

    Where are their analogues on a Mac, how are they appointed and how to find them?

    Thank you

    Thomas

    Under/Users, there is a directory with your name. There is a whole/private directories, which are usually used for temporary work space. Is there a specific reason/question looking for files/directories?

  • Using the markup with iPad Pro

    I open a pdf file in apple mail and used the markup and saved. It is not in the project and seems gone. Help?

    Check your iBooks app.

  • Apple Watch activity is not in the cloud?

    So, I've been using a Apple Watch for a while and my number one problem is that 'Activity', I put together for the last year is not sync with the iCloud, so when I upgraded my iPhone 6 to iOS10 all my activity watch is gone. I tested this point last week and it seems that "Activity" app does not synchronize your data in the cloud, so if you lose your phone or your watch you will have to start all over again and latest data are lost. This seems to be a huge concern when I spend all this time my overall follow-up and progress. Everyone see what happens if you put to level or restart/reset your watch or your phone?

    Hello

    Health and historical activity data is stored on your iPhone. It is not recorded separately in iCloud.

    To guard against data loss, be sure to make regular backups of your iPhone.

    If the backup via iTunes, make sure to select the option to encrypt iPhone backup (unencrypted backup excludes the sensitive data, including health and activity). iCloud backups are encrypted as standard.

    More information:

    The backup of your iPhone, iPad and iPod touch - Apple Support

  • Since update 10.0.2 at 6s "trash all ' in the Inbox.

    Since I did the update (10.0.2) I can no longer just "trash all ' mail inbox (Verizon).  Because I get emails 300 + a day, I need to be able to empty my Inbox easily without deleting all of them individually.  It is very irritating and time consuming.

    Anyway around this?  Thank you...

    sharikay wrote:

    Anyway around this?  Thank you...

    Not at the moment. Tell Apple you want to come back.

    http://www.Apple.com/feedback/iPhone.html

  • Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

    How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

    Hello wdemetris,

    Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

    As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

    Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

    If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

    Thanks again and have a great rest of your day.

  • iTunes will not regroup under the name of artist albums

    I noticed at the bar on the left with the artists, sometimes there are twice, the same artist, with each having only some of the albums and I can't group all albums under the name of an artist to the bar.for some artists can't do, but I did it because some others.anyone know what to do?

    If you see unexpected songs groups when you browse an album - https://support.apple.com/HT204538 - 'songs from the same album may not be grouped as expected when you view them in display Albums in iTunes."

    For most people this solution seems to be one that works: August 2008 post by turingtest2 temporarily change labels - https://discussions.apple.com/message/7904806#7904806 or http://www.samsoft.org.uk/iTunes/merge.asp - add a letter at the end of the name of the artist, close the read information, then open it again and remove the letter. This works often but I had cases where securities combined when a letter has been added but divorced when he was kidnapped again.

    The following sections provide additional solutions:

    Often a solution: select all the tracks on the album, file > info (or right-click > news > Details) and give them all a single "album artist", or check the indicator of "compilation" (as in https://discussions.apple.com/message/17670085#17670085).

    Steve MacGuire alias turingtest2 - iTunes and iPod tips and tricks - grouping beaches in Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (old post on Apple Discussions http://discussions.apple.com/message/9910895#9910895)

    If they are several CD sets, you will also need to enter the appropriate information in the fields of number of disk.  If they are not a set of multiple CDs that you must always make sure any vacuum or disc number fields are properly defined.

    Another explanation of hhgttg27 August 2015 - https://discussions.apple.com/message/27784417#27784417

    If they are mp3 files are trying to change the version of the ID3 tag, which can cause iTunes to re - write the tags and clarify inconsistencies.  I use iTunes 7.5 (Yes, from 2007) so I can't tell you where it is in later versions.

    I had a case of grouping stubborn reality.  The tracks will be re-group in a way that has no meaning when I changed metadata.  Without going into details, I deleted tracks iTunes completely, then add the files and they are all grouped together correctly.

  • My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

    My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

    Hello brooksm549,
    Thank you for using communities of Apple Support.

    I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

    On the use of the battery on your iPhone, iPad and iPod touch

    When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

    Maximize the life of the battery and battery life

    Best regards.

  • I have an ipod touch 128 GB... but I'm almost to reach its maximum.  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with other copies

    I have an ipod touch 128 GB... but I'm almost to reach its maximum.

    I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with the other copies of the other.

    is this possible?

    What should I do?

    Matt

    When you get the new iPod, you can use iTunes on your computer to select and synchronize the music you want on it, in the same way that you synchronize your current iPod - your iTunes will recognize them as different devices and will remember your choice of synchronization for each, it will not (unless, for example, you restore the backup of your current on her iPod) put the same content on both.

    (I asked for your post be moved to the iPod Touch forum, where you have posted is the iPad forum use.)

  • My iPad is registered in the United States, but I live in Germany. I want to change it now to my German address. What are the implications?

    I bought my iPad 3 to the United States by giving a U.S. address. I had assumed (perhaps wrongly) that give my German address would be denying me access to the English user interface.

    I live in Germany and I have a iPhone5s that I bought here in Germany where I live.

    I want to "App PAYBACK" (which helps me to accumulate points when I shop here in Germany) to use on my iPhone5s , but when I search in the App store, I see only a Mexican version. When I tried to download this app on here https://www.payback.de/app

    I get the message "not available in the US store.

    When I communicate with the help of Apple, told me that, if I switch to my German address the Apps that I downloaded from the US store may not get an update whenever they are released.

    Are there other problems that I should wait if I move to my German address?

    Hello

    Go downstairs homepage itunes itunes page by Email support

    See you soon

    Brian

  • "The App Store is temporarily unavailable, try again later."

    This will fix it.

    1 - Open the parameter

    2 - go to privacy

    3 - go to advertising

    4 - Turn limit Ad Tracking

    This will fix it.

    1 - Open the parameter

    2 - go to privacy

    3 - go to advertising

    4 - Turn limit Ad Tracking

  • Im getting an iPhone SE of the United Kingdom, I would like to know if it works in Albania

    I want to know if this works with the carrier that I choose

    It depends, if your carrier allows you to call or text outside of your region. Your iPhone will work in any country

  • Brother printer wifi "the printer is unresponsive.

    Hello

    I'm new to Mac but am generally competent computer/network.

    My son is in a the student house where 2 guys have Macbooks and 2 have Windows Mobile 10. the printer is a Brother wireless printer/scanner/fax.

    Among Mac users and Windows users can send impressions and analysis perfectly, but only one of the Mac users cannot.

    I deleted the printer and downloaded the latest drivers and re-installed but still cannot print.
    I tried adding via IP address but still does not work. I also tried the Air and BrotherCUPS, but none worked.

    HELP............!!!!!

    Greetings thequizman,

    Thank you for using communities of Apple Support. It seems that you experience problems printing to a Wi - Fi printer. Looks like you already have a troubleshooting. I recommend reading this article, you have already done some steps here, but there is more information you have not mentioned by train.

    If the issue is not resolved, take these last steps to remove all the drivers printer currently installed that might be causing the problem:

    1. Choose  menu Apple > System Preferences, and then click Printers and scanners.
    2. Control-click anywhere in the list of devices, and then choose "Reset printing system" from the context menu that appears.
    3. From the Finder, choose go > go to folder. Type /Library/Printers/ , and then click surGo.
    4. The Printers folder opens. Choose Edition > select all to select all the items in the folder.
    5. Choose file > new folder with selection to all the selected items in a new folder named new folder with the elements.
      To save storage space, you can delete the folder new folder with items after you complete the remaining steps.
    6. Follow the steps described in previous section once more.

    If your printing problem is not resolved, contact the manufacturer of the printer to support.

    Troubleshoot printer on your Mac - Apple Support

    Take care.

  • How to unlock the sim?

    How the sim card unlock iphone6?

    How to unlock your iPhone - Apple Support

Maybe you are looking for