the unstable image cropping slider control, jumps to the zoom of the image and lifestyle culture

Similar Questions

• Node property/reference for the image and 'Create VI' inconsistent control?

  Hello

  I encountered this problem several times already and although I have worked around him, so far, I would really like to understand what is it:

  If I have an image display control on the Panel before (IMAQ Vision, not the image control type) and drag a property node or a reference to it on the block diagram, it seems impossible to create a Subvi diagram if the selected objects are equipped with a knot of property image or an image reference. Select 'Create Subvi' won't do anything, don period. No warning, no beep system, no nothing.

  A related issue is that if I have a view control reference on the diagram and try to create a control from it (for example to use as a control on one dimension of connector VI entry), same thing, "Create control" will not do anything.

  Why is this?

  Thanks for your comments.

  X.

  Xavier,

  This was reported to R & D (35835) for further investigations. A possible workaround is to make the Subvi LabVIEW 7.1 and open it in the new version of LabVIEW.

• Handle mouse up on digital slider control - even when the mouse leaves the control.

  I have a stumper here:

  I have a slider control digital I want to reset to 0 when the user released the mouse button when you drag the control - sort of a physical joystick response where the stick back toward the Center by releasing.

  I am able to be a part work by managing the mouse event and setting the value of the control to 0. But the mouse never an event only occurs if the user drags the slider control and leaves the cursor of border control - and release the mouse when the pointer is out of control. In this case, the value of the slider is preserved and the mouse an event doesn't happen ever regarding the digital slider.

  Any help is appreciated.

  Al

  Try using the pane-> mouse event to the top instead.

• Mix volume slider controls appear on the screen and interfere with internet and other functions.

  Without warning, that controls Volume slide bar appears on my screen fluctuating levels as I was changing the volume/bass/treble level. This stops / blocks everything I do on the laptop such as typing, internet, turn on my connection 'Wireless', turns on volume mixers (I keep off) and stops my typing. It will last for varying periods of time, and then everything returns to normal. It happens on or off the power of the internet, wired or wireless.

  Played HP scan & all checks on okay scanned for all to implement. Everything is up-to-date.

  have screenshots

  product #: HP DDX16 Premium Series

  p/n: NK135AV

  model # X16t-1200

  Windows 7 Ultimate 64 bit

  

  Hello

  Unfortunately there is no firmware update for the capacitive on your particular model - instead, try the following.

  First of all, download and reinstall the utility to control the tone of HP on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45617.exe

  When you are finished, stop the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  This makes a difference in the question?

  Kind regards

  DP - K

• How to stop the slider to jump to a new location when the keyboard?

  As I type, the letters can appear at the beginning of a sentence or a paragraph which was completed OR in the middle of a Word.  I have no control, except to stop and reposition the cursor to continue my message.  It is important now that I'm in word or create a gmail message or a comment on Facebook.  Very annoying.  By writing this message, it behaved well; almost as if he's teasing me.  What a Rascal.

  I'll guess that you are using a laptop with a touchscreen mouse. Chances are you are brushing and causing your cursor jump. Try with an external keyboard and see if you still have the same problem. In some cases, you can go to control panel > mouse and check the settings to see if you can adjust the sensitivity to it.

  I hope this helps.

• the effects\transform\crop of the video isn't "cropping" correctly in the effects control. 'left' must adapt to the top; 'top' must adapt to the right; "right' fits the bottom"; and 'down' to the left adjusts. Suggestions on how to reset?

  the effects\transform\crop of the video isn't "cropping" correctly in the effects control. 'left' must adapt to the top; 'top' must adapt to the right; "right' fits the bottom"; and 'down' to the left adjusts. Suggestions on how to reset?

  Have to ask - did you apply rotation to the clip?

  MtD

• I'm LR4 running on a pc. Control-Q does not close the program. (Sometimes it changes the selected color to b & w image.) I was closing the window by right-clicking on the LR icon in the taskbar and selecting "close window." Is - it really close the

  I'm LR4 running on a pc. Control-Q does not close the program. (Sometimes it changes the selected color to b & w image.) I was closing the window by right-clicking on the LR icon in the taskbar and selecting "close window." Is this really close the program? (It also changes an image n & b).

  -> Output file, or by clicking on the red X in the upper right, should work.

  CTRL-Q should work unless there is a Windows keyboard command that replaces it.

• Can I create a slide show of slider/image carousel with the possibility for the links and the widths of the image to an Adobe program variable and then place in Muse

  Hello

  I really hope someone can help me with a project that led to drive me to despair.

  I'll put up an online art gallery, last year, I used Wix to create a site (explorersglobalfineart.com). Initially, I thought it was a good idea that I could build the mobile site with the site of the office. It turns out that features model are appalling and every time I add a new page I have to reinstall everything on the mobile site.

  In the last month, I've searched Adobe Muse. I started to build the site map and added to the artist page, but there are pages on the current site which have a slider carousel with the possibility for widths of the variable image and links that I cannot emmualte in Muse - http://www.explorersglobalfineart.com/#! Asia/cfvg

  Is there an Adobe program that I can use to create a cursor image carousel with the ability to tie and use images with varying widths which is compatible with Adobe Muse?

  Thank you very much

  Rebecca

  You can try this:

  http://musewidgets.com/products/carousel-Gallery-Widget

  Thank you

  Sanjit

• How to remove the decimal value (. 00) of the slider control

  Please ask me how to remove the decimal value (. 00) of the slider control and Add (if possible) % in after effects cs6.

  I guess you mean to animate text with a slider.

  Add a slider (options for expressions) to your text layer and then add this expression in your Source text:

  x = Math.Floor (effect ("Slider Control") ("Slider"));

  x+" %"

  That's all

• Control of the expression / Slider control works with the percentage?

  For example, I want to do something with keyframes, so opted to use "regulator toslide ," but is now defined by the "cursor", if I put the wiggleexpression (2.5) and place 2 on the regulator to behind the scenes, knowing that the value will be replaced by the value of "slider" so in the case of the control slide was "10". , would look like this: wiggle (10.5)

  But I want to know is if the control of the expression of origin by a percentage and not a replaced, for the value of the slider control.

  Thank you!

  If the amount of your max value is set, then by creating the cursor to drive the percentage of this number requires a few simple calculations.

  Degree of accuracy desired percentage to be hover would require a small change that in mathematics.

  This example allows you to animate a percentage of '2' frequency (maximum value) in agitation, but allows the range '5 ': stay

  mV = 2; maximum value

  PERC = (effect ("Slider Control")("Slider")/100);  makes a percentage since the slider value by using 0-100

  Wiggle(MV*PERC,5)

  explanation:

  There are several ways to do so.

  The slider is unlimited, so you can define OTHER rules in your expression, but to keep it simple:

  You must multiply your maximum value of your "perc."

  However, we want to transform the number 'perc' in a fraction.

  A simple way is to divide the amount of cursor by 100.

  Multiply your max value with the result of your cursor (/ 100) and you have your percentage.

  (* You can use fractional numbers to animate instead of this, but the cursor is easier to control in this way.)

• Intermittently, jumping to the first and the second slide instead of the conditional action

  Hello

  I have an action on the first slide in my Captivate program (7 Captivate), (press Enter) which says that if your variable = this, go to a slide specific (v_lastmod = 1, jump to slide 4) and I have about 19 of these if statements in the action.

  What I notice is sometimes (intermittently) rather than to go to this particular slide, he would go to the first slide and continue on the second slide (and obviously not stop there since there is a pause button). If I click on update, then it reload again and go to the slide by the action.

  I tried to add a loop where the else statement repeated the action, just in case it might be a problem of preload? That doesn't seem to work. It would be just stuck on the loop. I also tried to add a preloader by default preload that Captivate and always intermittently it crosses the first slide and just keep to the second slide (unless I hit refresh, it will take me to the appropriate slide). I also tried to add Else, keep, but no change.

  Any ideas or suggestions?

  Thank you

  Ruth

  It is not a good idea to have such a pretty complicated advanced right action on enter to the first slide. It must be generated at run time and the offset is probably what you see. Try adding a short welcome slide before this slide, which has no action on enter. That might solve your problem in a simple way.

• How do you control the position and size of the images, IE. photo to the printer?

  HP Officejet 8600

  Windows XP

  I'm trying to figure out how to control the position and the size of the photos or photos that are included in an email that I send to my printer via HP ePrint.

  Hello. The process that I mentioned using Word provided that if we were send emails to the printer from a computer. If you just transfer emails from the iPhone to the printer there is no option to control the position of the jpg print. This isn't something that can be handled right now on ePrint.  The attachment will be printed on a separate page. The body of the email will be printed separately of the spare part.

• I have a problem with the slider to jump on the computer.

  Original title: I'm going crazy typing anything!

  When I start typing my continuous typing to jump around and inserting what I'm typing in the wrong places instead of simply continue typing as it should.  I don't know why or how to fix it, but I'm going crazy typing anything!  If you know how I can fix this help please!

  Thank you!

  Deborah

  Hello Deborah,.

  Thanks to join Microsoft Community where you will find all the required information on the Windows operating systems!

  When you type, the cursor jumps.

  The problem may occur due to the speed of the pointer mouse inappropriate or if the sensitivity of the touchpad is too high.

  To help you better, we need more information.

  What is brand and model computer?

  To work with the issue, I suggest you follow these steps:

  Method 1: Hardware store

   

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Update mouse drivers

   

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 3:

   

  Change the settings of the mouse pointer.

   

   

  Refer to section to change the mouse pointer works on the site:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-in/Windows7/change-mouse-settings

  Method 4:

  If you use a laptop, change the sensitivity of the touchpad.

  See solving problems with your touchpad in more options in the site:

   

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• View the results of a slider control

  HI, I'm suggling on this pl/sql, because I just started learning a few weeks ago. Basically what this pl/sql is check

  in my article "the time" to see if any time is not in the current time format and if it finds one it should display only and then someone can go and check.

  Firstly this my_table has 3 different columns which makes it the primary key, so I need display the columns so that the administrator can find the

  incorrect data easily in the time column.

  These 3 columns that actually the primary key are 'sid', "setid" and "sentry".

  I have created a slider and possesses the top loop to check all the my_table data but I do not know how to dmbs_output

  all results at once. In the results, I need to display all the columns in key primary and thus 3 under and this column that the data is.

  IF SQLCODE =-01858

  THEN

  Dbms_output.put_line (-);

  Can someone help me please.  Here are my codes

  DECLARE

  v_result varchar2 (4000);

  v_key1 varchar2 (10 byte);

  whole v_key2;

  whole v_key3;

  cursor c_get_times

  is

  SELECT sid, setid, Sentinel, time FROM my_table;

  c_get_times_row c_get_times % ROWTYPE;

  BEGIN

  TIMES a c_get_times LOOP

  v_key1: = times.sid;

  v_key2: = times.setid;

  v_key3: = times.sentry;

  SELECT TO_DATE (times.time, "HH24") IN v_result FROM my_table;

  END LOOP;

  OPEN c_get_times.

  LOOP

  EXTRACT the c_get_times in c_get_times_row;

  EXIT WHEN c_get_times % NOTFOUND;

  END LOOP;

  EXCEPTION

  WHILE OTHERS

  THEN

  IF SQLCODE =-01858

  THEN

  Dbms_output.put_line ();

  ELSIF SQLCODE =-01851

  THEN

  Dbms_output.put_line ('invalid value for minutes");

  ON THE OTHER

  Dbms_output.put_line (' failed with another unknown error: ' |) SQLERRM);

  END IF;

  END;

  If you can create the object in your schema, create the function below and the race below query it will give a correct result. I think that's the test objective you ask, otherwise do not use DBMS_OUTPUT. Just create the function and run the select statement.

  FUNCTION to CREATE or REPLACE date_chk (p_value VARCHAR2, VARCHAR2 p_format)

  RETURN NUMBER

  AS

  v_val1 NUMBER (10);

  T_DATE DATE;

  BEGIN

  T_DATE: = TO_DATE (p_value, p_format);

  RETURN 1;

  EXCEPTION

  WHILE OTHERS THEN

  IF SQLCODE =-01858 THEN

  RETURN 0;

  END IF;

  END;

  SELECT the sid,

  SetID,

  Sentinel,

  timeval

  OF test_time

  WHERE date_chk(timeval,'HH24:MI') = 0;

• HP 255 G4: problem with sensitivity to the touch and slider jump

  My question - problem could be funny, but it's a problem.

  I bought HP 255 nine G4, from the box. First impression was: a pleasant experience, but first touch was terrible. I had several laptops, but never the same problem: cursor is wavering and being so inprecise it is almost impossible to locate some details using the key.

  I have included a picture of the surface of the laptop. Should I maybe take off this perforated layer and reach the brilliant below surface? I tried to peel on the rounded corners, but he can't go easily, so I didn't damage it.

  Please give me a sugestion. :-)

  I'll answer myself, could someone help.

  When I installed WIN 10, all problems are gone.

  With WIN 7, nothing worked, I was responsible for the search and looking for drivers, but USB 3.0 has not worked, F keys did not work, touchpad was terrible, all together, very bad.

  With 10 WIN, everything worked, only a few development was necessary.

  With the new computer (product end of September 2015) the new system (WIN 10) so enjoy.