Node property/reference for the image and 'Create VI' inconsistent control?

Similar Questions

• Web client - System Configuration node displays 'Unknown' for the Uptime and the workload, no value for IP & Hostname

  When I connect on our vCenter 6 Update 1 device (embedded PSC) via the Web Client with integrated Active Directory ID, select "System Configuration", then select the node for vCenter, summary screen displays all the information IP or host name.  In addition, the status of availability and workload for storage/memory/swap/load of work view all 'unknown '.  See attached photo for reference.

  All values under management-> settings are also empty.

  When I login with [email protected], all the above values are displayed and I can change the settings of the device of vCenter as expected.  This made me suspect a permission problem exists, but I cannot know what SSO group to add our AD is less to enable management or control of the aircraft from vCenter for that it works as expected.

  Already tried to add our accounts to the following groups in SSO under the vsphere.local domain:

  DCAdmins

  SystemConfiguration.Administrators

  ComponentManager.Administrators

  Directors

  This information on the purpose of each group unfortunately did not help me understand which could apply:

  Groups in the field of vsphere.local

  Thank you very much for the help!

  I just did some digging on this myself (we deployed now U2 6.0) after I tried the same things (adding AD users in the SSO domain groups, etc. etc.) without success.

  What I have found is that it is simply a WELL-KNOWN PROBLEM with 6.0 U2 and maybe they'll fix with U3 6.0 when that comes out (later this summer)?  Maybe it'll be 6.5 at that time, with an announcement to the VMworld 2016 or something - who knows.

  The workaround is a joke--suggesting the deployment using only the SSO domain by default.  Well, which is never going to happen naturally, so he says as a workaround is, if you really need to get and display status, etc. from the web client, you simply connect with your [email protected] account that was created at the initial time of installation.

  VMware vCenter Server 6.0 Update 2 Release Notes

  *****

  Failed to configure and view information about the vCenter Server Appliance by using the System Configuration page in the Web Client vSphere with errors
  Connect to the instance of vCenter server in the vCenter Server Appliance with a user who is located in a custom name (different from the default vsphere.local) Single Sign-On the field by using the Web Client vSphere. On the vSphere Web Client home page, click on the System Configuration and select nodesunder the System Configuration. If you try to change the settings, restart or power off a node of the vCenter Server Appliance, the operation fails with one of the following errors: An internal error has occurred - Error # 1009 and Not authorized to use this API . If you click on the summary, monitoror Manage tabs, some device information cannot be displayed.

  Workaround: deploy the vCenter Server Appliance by using the domain of Single Sign-On by default: vsphere.local.

• How to set up the images and captions after the import of Word 2007

  I have three general issues (ID CS4):

  • I haveMagi are placed inside the text block. How could I place them in any other place easily? If I try with the holding of the left button of the mouse, which is not possible. I have to cut it and paste it again. What is this possible.
  • How to create captions for the images and tables? I get Word of text style with a description. Maybe I need to number the pictures and tables. The common question is: is it necessary to number of images and tables in the SW user manual? I've seen a lot of documentations and there were not counted. There are common rules, when it is necessary to dial it and when not? If yes how can I do such a legend in InDesign? I tried it and I am so far, I can do it in a separate text frame for counter with text. It is the only way?
  • Import of untied the size table and the table is placed off the page. I didn't understand why ID has not regained the same size in Word 2007

  Please see my file:
  http://www.FlashMedia.cz/temp/import_word_2007.indd

  I answered this question, and we had a lively discussion. Yes, you

  create a separate text for captions. You can use automatic

  numbers, or type numbers in itself. If you do not understand the

  words in the discussion, or if you need more "hand holding" Guide

  through, I suggest that you look for some tutorials online.

  -

• To create a ToolTip text for the image with multiple image map links

  Hello
  
  RH6 using, that I imported a picture into a topic. For the images that I have created several maps image to post a link to other topics. However, I can't create a map image additional to that same image that includes only the screen Tip text. I get a message of invalid value: "Please select a file, bookmark or topic to bind the hyperlink to.»
  
  Is there a way to create a popup only the text of an image with multiple image map links? My final output will be to WebHelp but possibly migrate FlashHelp in the near future.
  
  Thank you
  
  FMnRH
  
  
  
  Thank you
  FMnRH

  If the image is at the beginning of the subject, or all alone in a reference topic, you can put "#" (without the quotes) as the link for each area reactive.

  If the image is larger than the viewing window, it can jump to the top, but only if the user clicks on the link.

  I tried wz_tooltips and like it. I agree with Leon, it will take time for the first image but maybe go faster later.

  Harvey

• Create proxy for the image sequence

  Hey guys,.

  Today, I was delighted to see the newly implemented for PremierePro proxy workflow.

  Unfortunately I have not yet figured out how to apply this workflow for image sequences.

  Is this possible?

  Background:

  We do not stop motion animation and all our images always comes into frame sequences with each frame being 20 MP. We want to keep the resolution up to photo-serrure, because we would like to keep the possibility to crop and zoom into images.

  So far, we have created lowquality of sequences of images as proxies (in the same resolution) and they use them for editing in a FullHD timeline, where we can evolve and frame (and of course change) images. After picture lock replaced the original media. Once the images is online and the harvest is final, we create a FullHD prores file for VFX and editing.

  But this process is error-prone.

  When I now import a sequence of images in the creation and create a proxy for her, a mov with only the first image file is created.

  Which is obviously useless.

  My question:

  1 would it not possible to import a sequence of images and create a sequence of images of proxy (with the same interpretation of the images, i.e. of framerate) from the original image sequence?

  2. the sequence of images proxy perhaps erred in lower resolution (original image in format 5760 x 3840 px, resolution 1920 x 1080 proxy), and once I pass the proxy to original scaling is adjusted accordingly.

  Really looking forward to some tips to achieve this!

  Thanks and good luck

  Max

  I had a little further:

  I made a mistake by creating templates in the MediaEncoder:

  I created a coding model and not a model of ingestion (who both the end of the .edr file), which should in fact have been obvious.

  So now I have:

  1 has created a file of 5760 x 3840 Prores4444 out of sequence of images

  2 imported the first PorRes4444

  3 creates a proxy using my own template (ProRes 422 Proxy 1920 x 1280) with aspect ratio 3:2.

  It works, BUT:

  When I play the file on the timeline proxy, the proxy file is adjusted differently than the original file (proxy disabled), but only during playback.

  It is probably a completely different question, I'll create another post for this.

• save an image in an image file and reloaded on another computer for the image processing

  Hello

  Can I save the image to an image file and then reload the file on another computer for the image processing? What type of image format should I save for it? Is there any loss of image if I do this? The machine with the camera sits in our lab, and I want to test the software on my own computer image processing. So can someone give some good ideas on this. Thank you

  Jane

  I assume you have the module development VDM and vision acquisition software going TO on your computer.

  So just use playback IMAQ and IMAQ save functions. BMP, png are good for losless save unlike jpg and jpeg2000.

  Hope this helps

• Mac OS 10.6.8 - Photoshop CS5.1 after years of perfect use, suddenly I'm unable to select a layer by clicking on the image and select it in the layers palette.  Solve this problem for me and I'll buy you a new car.  With our thanks, David Heidelberge

  Mac OS 10.6.8 - Photoshop CS5.1

  After years of perfect use, suddenly I can't select a layer by clicking on the image and select it in the layers palette.

  Solve this problem for me and I'll buy you a new car.

  With our thanks, David Heidelberger

  Hi David

  Have you checked your settings to automatic selection in the upper left of the workspace?

  

• Hi Ive had lightroom 6 installed for three months now when I export my image the watermark is not on the image and it know test expired above were he know lightroom on top

  I export my image the watermark is not on the image and it know test expired above were he says lightroom on top

  Please create a new watermark with a completely new police force and then check.

  To pause Lightroom Mobile, click on your name on the top left corner and that there should be a drop-down list, you will see the option to Pause.

• I recently updated the Canon mark II to the mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and use

  recently updated the Canon mark II, mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and am using camera raw 9.2. I checked the updates and it is said that there is not. I also tried to purge the cache several times and that didn't work either. Any help with this would be so appreciated its driving me crazy!

  Take a look at this: generic icons | Files camera raw | Adobe Bridge

• Try to reinstall Adobe Design Premium Web.  I have the serial numbers for this product.  Download image appears on my desktop.  Click on the image and 'unrecognized image' help!

  Try to reinstall Adobe Design Premium Web.  I have the serial numbers for this product.  Download image appears on my desktop.  Click on the image and "unrecognized image '.  Why?

  Please try to download Creative Suite 6 applications and start the installation.

  Please let us know if you are unable to install it.

• I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  I just reinstalled Adobe Acrobat X 1 and I can't save files PDF that is sent to me. I just get "this document cannot be saved. There is a problem reading this document (21)"and then when I click OK I get 'not enough for the image' help!

  More information on this issue can be found here:

  https://forums.Adobe.com/thread/1672655

  A "quick" fix that worked for me was to uninstall Adobe... and download Adobe Reader 11.0 installation base.

  Then download each individual updates and run them sequentially.

  I installed back to the last update of security which is version 08 and were able to register under normal operations.

  You will need to disable the automatic updates to keep up with the 08 version, until Adobe fixes this problem in a future release.

  http://www.Adobe.com/support/downloads/product.jsp?product=10&platform=Windows

  Adobe Reader 11.0 - installer multilingual (MUI) AdbeRdr11000_mui_Std

  Adobe Reader 11.0.01 update - installer multilingual (MUI) AdbeRdrUpd11001_MUI.msp

  Adobe Reader 11.0.02 update - all languages AdbeRdrSecUpd11002.msp

  Adobe Reader 11.0.03 update - installer multilingual (MUI) AdbeRdrUpd11003_MUI.msp

  Adobe Reader 11.0.04 update - installer multilingual (MUI) AdbeRdrUpd11004_MUI.msp

  Adobe Reader 11.0.05 - all languages AdbeRdrSecUpd11005.msp security update

  Adobe Reader 11.0.06 update - installer multilingual (MUI) AdbeRdrUpd11006_MUI.msp

  Adobe Reader 11.0.07 update - installer multilingual (MUI) AdbeRdrUpd11007_MUI.msp

  Adobe Reader 11.0.08 - all languages AdbeRdrSecUpd11008.msp security update

• YES for the WWN and Mac

  When I create pools of wwn and Mac for a service profile template, is there a block of addresses that start with a YES that are specific to UCS?  In this guide: http://www.ciscosystems.sc/en/US/products/ps10281/products_configuration_example09186a0080af7515.shtml, I see a trick in the window of this picture: http://www.cisco.com/image/gif/paws/110297/create-sp-ucsblade-11.gif that specifies the use of the prefix 20:00:00:25:B5:xx:xx:xx will ensure uniquiness in WWN name, but when I'm in the same screen on our UCS, I don't see this trick.  The same goes for MACs, there at - it a block with certain values that I should start with?  The MAC of the guide section shows 02:25:B5:00:00:00 in the configuration window: http://www.cisco.com/image/gif/paws/110297/create-sp-ucsblade-09.gif but it is this unique UCS?

  Thank you.

  For the MACs Cisco recorded the program YES 00: 25:b5 the last three bytes are to you. You can either some arbitrary numbers of makeup or you can put a logic behind it. Here's what I recommend for MACs.

  • Create two clusters of MAC; one for the fabric and the other for fabric B
  • For the last three bytes, use the first for the site/cluster and the other for fabric or B. Example site 1, group 1 and fabric would be this 00:25:b5:11:a0:00 and go up from there. Fabric B would be this 00:25:b5:11:b0:00 and this 00:25:b5:12:a0:00 cluster 2.

  For the WWNNs and the WWPN, you want three pools; one for the node WWN and two for the port WWN (vHBA).

  Same concept here for the WWNNs use something like 20:11:00:25:b5:00:00:00 for the site 1 cluster 1 and 20:12:00:25:B5:00:00:00 for cluster 1 2 site.

  For the WWPN pools do one for fabric and a fabric b like this

  • Fabric of the 1 Group 1 site - 20:00:00:25:b5:11:aa:00
  • Fabric B 1 Group 1 - 20:00:00:25:b5:11:bb:00 of the site

  By creating pools MAC and WWPN for each tissue, you can easily identify what fabric on a MAC or WWN comes when you look at the MAC table on a switch or what zoning, you can easily select WWN. might be useful when troubleshooting as well.

• Error message when I try to print the pdf: "insufficient for the image.

  Part of my job is to create pdf documents, insert maps in pdf format, locking documents to prevent tampering, but that allows you to print and send them to customers.  Recently, I've updated for Adobe Acrobat Standard 11. Since then, I had trouble printing pdf documents, I create; I get an error message "insufficient data for the image. Cards in the document are not displayed, and it cannot be printed. If I re - create the document and do not put the permissions password to this topic, the document is fine. But I have to be able to lock my pdf documents to prevent tampering. Help, please!

  Thank you! I installed the 11.0.11 patch and it works!

• Backgrounds of different bodies for the index and the child pages?

  Hello

  Can someone tell me if it is possible to create different background images for the index and the child pages? Thank you!

  gratefulcreative wrote:

  Hello

  Can someone tell me if it is possible to create different background images for the index and the child pages? Thank you!

  Yes it is possible.  There are several ways to do so; one way is to use styles inline like this for each of your pages:

  Good luck.

• blurring of the images and keep the average luminance

  I am cropping Visual attention - I work with black and white geometric patterns (think of checkerboards, swirls, etc.) and I want to take my images 'standards' and climb in different ways so that they look at novel but contain pixels of same exact like the original, so to keep their original average luminance.  I know how to use filters "distort" but I don't know if these maintain overall luminance or not... what I would ideally like to do is just highlight some parts of the image and move them, creating a mosaic of the original image.  Any suggestions?

  Thank you.

  I can't think a soloution a single click, but I tried the research of various effects of mosaic.  To do this manually you would need a repeating pattern like a hexigon.  You can use the form to eradicate the fields one at a time and copy into a new layer and then do a transposition of the word puzzle type.  Set your palette of layers in the large thumbnails so you can see what "tile" to pick up and move, or better yet, select the move tool and check "Auto Select" to the far left of the options bar.  I hope someone will come up with a simple solution for you.