Similar Questions

• The best upgrade for a HP g7-1150us laptop ddr3 memory? b

  I recently got a HP laptop g7-1150us with 4 GB of ram.  I intend to upgrade the ram by adding another module of ram of 4 GB.  What is the best?  What is the laptop double channel capable?  I can't find anywhere what ram of 4 GB module comes stock?

  Experience of entry would be welcome... Thank you.

  This model has only 2 memory slots, has most likely 2x2gb modules installed and yes it is dual channel.

  It uses ram DDR3 10600 (1333 mhz)

  I would buy a 8 GB kit (2x4gb modules) this is the maximum memory that can be installed in your model

  I tend to buy the memory of mark which is on sale at Fry's electronics, I look at the ads for sales, but I have a shop near by, you can not.

  http://frys.com/ads

  .

  Last mark I bought for this type of memory was g.Skill, works very well in both my HP laptops, looks like Newegg has a good price on it and free shipping.

  http://www.Newegg.com/product/product.aspx?item=N82E16820231295

  .

• Upgrading the RAM. Can I use the old memory of the computer for the newly purchased computer.

  My old computer which does not has RAM 1.00 GB Dual-Channel DDR @ 106 MHz (2, 5-3-3-7), while the anther computer, I bought recently has RAM DDR 400/128 bits. Can I use the old memory of the computer for the newly purchased computer. Are they compatible? Thank you

  Hello nonmae,.

  You must use DDR 400/128 bit RAM in your system. @ 106 Mhz DDR is quite old. It's also much slower than the DDR 400. RAM is not particularly expensive today and it is always best to stick to that suggests your PC user manual.

  You must use the same speed too, if you use a lower speed, the memory of your PC by default at the lowest speed, thus slowing the PC

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Given the 10.5.8 to 10.6 Snow Leopard upgrade.  Meet the Intel/memory minimum requirments.  After a full backup of course.  Anything I should be aware of before trying this?  Possible to the functions/effects?  Due to browser problems

  Given the 10.5.8 to 10.6 Snow Leopard upgrade.  Meet the Intel/memory minimum requirments.  After a full backup of course.  Anything I should be aware of before trying this?  Possible to the functions/effects?  My data (mp3, photos, documents, etc.) will not be affected?  I also have Windows for Mac.  It will not be affected?  Recent browser performance is untenable in weeks.  Safari 5.0.6.  Now even my Firefox is fact-zo.  Process seems simple enough, but thought I would ask a preview as many reviews on here seem to go anyway in regard to recommend it.  Thought that I have gathered a few comments before the trigger (or not) thank you to all those wh

  Just to start with this one:

  I also have Windows for Mac.

  I assume you mean that you run Windows in a virtual machine such as Parallels? If so, the machine virtual peut must be updated.

  When you install Snow Leopard, make sure to choose the option to do a custom install, so you can select the check box for Rosetta, or it will not install and PowerPC applications will not run. Not a huge deal if you miss. The first time you try to run a PPC application if Rosetta has not been installed, OS X offers to download and install it for you.

  Firefox works under Snow Leopard, which is the oldest version of OS X Mozilla always supports. Safari installed with SL will remain grossly outdated and should not be used.

  Nothing will happen to your documents, although I can't say with certainty that all the apps from third party that allows you to open will not be updated. They can. They cannot. For example, Office 2004 will run as long as Rosetta is installed.

• The fill memory for laptop Pavilion dm1-4010us?

  What are the specifications of memory RAM upgrade 4 GB laptop Pavilion dm1-4010us?  I tried to improve my memory from 4 GB to 8 GB by adding an additional module of 4 GB.  In both cases, the laptop wouldn't restart, and I had to remove before proceeding.  I am trying to determine the EXACT specifications for the upgrade, I hope to accomplish, so that I have purchase the correct memory module the next time.  Thanks in advance for any help.

  You are the very welcome, Doug.

  Please post back and let us know how your upgrade was memory.

  I'm not a 'true' Associate Dean. I'm only insofar as a Bachelor's degree in life.

  HP uses a schema of academic rankings for members of the forum.

  http://h30434.www3.HP.com/T5/community-news/HP-support-forum-ranking-overview/m-p/6#M337

  More you help people and they give you "Bravo", you go to the top of the scale.

  If you click on my user name, I have a public profile web page that gives a little info on my experience.

  Best regards

  Paul

• Pavilion dv7-6157 can be upgraded for the games?

  I bought my son the Pavilion dv7-6157nr two years ago and he has problems with graphics on the high-end gaming, he plays. They freeze or crash. It has 8 G DDR3 SDRam, 2 generation Intel Core i7 2.2 GHz - 3.10 turbo and a radeon HD 6770Ms graphics card. Video memory it says "itchable graphics"... What does that mean?  This computer can evolve in a way that would help the graphics? Y at - it a graphics card or driver upgrade? More graphics memory can be affected?

  I'm tired of hearing that suck laptops.

  Laptops are not really designed or constructed for the high end games. I doubt that adding memory will make much difference. Given that the two most important points (CPU and GPU) cannot be updated easily, it is a losing battle.

  The only other options I can suggest are...

  (1) a HP System Recovery to return the computer to a factory like State

  (2) do a clean install of WIndows 7 and try to use latest drivers for chipset manufacturers

  (3) buy a new computer that exceeds the requirements of game

  If you have any other questions, feel free to ask.

   

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• The evil of Smartphones from blackBerry Device Software upgrade: "device has insufficient memory space.

  I have currently dropped. 5.0.0.32 8 and you want to upgrade to the latest version because the missions here, the most recent version can solve some problems I'm having with the PC recognize the device memory and map Media.

  Device memory Total 879,2 mb

  The device memory 2.5 MB free space

  14.8 GB memory card

  14 GB free memory card

  Under device memory/Device membory/home/usr

  in these cases, I have NO files

  audio books

  documents

  music

  photos

  podcasts

  ringtones

  Parameters

  videos

  VoiceNotes

  I perform a fresh restart

  connect to: http://na.balckberry.com/eng/update

  Click on the button "Check for Updates".

  Current task...

  then, always during the loading of the ringtones, I get the error:

  "peripheral not a lack of storage space for accomondate appliction selections."

  I don't see how I can remove all of the files that are more out of my device memory.

  What is the solution here?

  The device memory 2.5 MB free space

  1. that ^^ stands for me as a red flag. 2.5 MB of free space is too low. You really need clear a space of memory, applications, etc., from your device or you continue to have problems.

  2. I do not recommend the upgrade route based on the web that you are trying to do. I've seen too many problems.

  Do the upgrade manually.

  First save your device completely, using the Desktop Manager. Then close DM.

  Then, follow the instructions IN this link and downloading the 5.0.0.41 OS 9 for the Storm 9530

  (I guess you have a 9530, it would be useful to the future of your State apparatus model - there are four different models of storm).

  http://www.BlackBerryForums.com/General-9500-series-discussion-storm/214688-latest-OS-9530-5-0-0-674...

• What are the best "bang for buck" upgrades for my MSI m/brd?

  Hello to you all,.
  
  
  This is post multi-question, my apologies if it is not consistent with the Protocol of this forum, I thought that it would be wiser, that post 3 different questions related to this topic. Hope somebody smarter that I can enlighten my brain electronically challenged!
  
  
  Desktop HP My p6320y came w/a updated motherboard MSI 785GM-E51 (FX) military class II. There w/4 DDR3 DIMM slots. According to the manual, I can use "dual-channel" mode What are the advantages and disadvantages between DDR2 and DDR3, & single or double channel?
  Right now, he has two modules of 4 GB memory installed in the first 2 slots (DIMMS 1 and 2)
  The manual States certainly not for Exchange DDR2 & DDR3.  So, if I want to max out my ram, & run it in dual channel mode. I need to complete all 4 slots w/4 GB DDR3 DIMMs for a total = 16 GB of RAM.
  Would execute my M/consultant w/16 GB max. two-channel mode. RAM has make my system perform significantly more fast/visibly better? Or I could use the cost of the 2 memory modules xtra in a different way to give me a clearly observable bump in performance?
  So that had him drive performance, would upgrading my current CPU (phenom quad core AM3 2.7 Ghz) to something more 3.0 Ghz, be worth the effort & produce an observable speed bump?  Or do the two would be too much to kill the M/Board of potential?
  Finally, the manual explains how overclock my FSB in 3 steps: 10%, 15%, 20%. Is this really a Hi-risk for ovr. / CLK. compared to the increase gained? Even on the low setting - 10%? Would be an additional fan counter the rise of heat, which allows a full life?
  
  
  Thank you very much for any advice, Alan

  My preference is a Samsung 840 Pro series SSD. I went from Windows from my hard drive to SSD with EaseUS Todo Backup ver 5.5 'Home' edition (Home supports cloning) which is what you need to do, in addition to your SATA I hope is set to AHCI and IDE mode AHCI is required to support the 'Trim' that all need units SSD to truly free disk space when a file is deleted.

  It was modified a Hervé 65, air, fuel injected, forced exhaust headers, great FI pistons, to the special slippers and cam, suspension, shock absorbers and transmission.

  J W Stuart: http://www.pagestart.com

• What is the good memory of 2 GB for my Areca ARC-1880ix

  Hello

  My Areca ARC-1880ix came with 1 GB of memory onboard.   I can't upgrade to 4 GB of memory.  But I'm just upgrading it 2 GB of memory, replace the key of 1 GB to 2 GB memory.

  I want to double check to make sure that the new memory is "compatible".  One of the reasons why I'm checking although it seems that the stick indeed fits within the Council, the stick is not too 'high' as the original memory stick.

  I guess that I'm being too cautious. I guess I could just the memory stick in the card and see if it explodes.  But I tell myself that I would run the sticks by experts here.

  See the attached photo of the two sticks, side by side. BTW, the upward alignment slots...

  The memory stick supplied with the card has these specifications:

  UNIGEN
  UG 12T7200M8DR-8CR

  1 GB DDR2 800 240PIN RDIMMS

  1116 ME75TDM80018CUEKRS

  The memory I bought is 2 GB and here are the specs:

  Kingston

  9905429 028.NATALIA AOOLF

  KTD-DM8400A / 2G

  1.8V

  0000005468831

  Specifically, this stick:

  http://www.Amazon.com/GP/product/B000ACZC9C

  Product features and technical details

  Characteristics of the product

  • Includes a module to 2 GB of 533 MHz DDR2 Desktop for Dell
  • Replaces Dell A0515351, corresponds to the size 4700C, xps gen 5, e520, optiplex 210l, 740, 745, gx280, gx520, gx620, gx745, sx280,.
  • Memory designed, manufactured and tested to the specifications of each particular brand computer system
  • The leader of the industry in the PC memory
  • type of DIMM 240-pin
  • Station work Precision 380 390 and xps 600 700 710

  Technical details

  • Model: KTD-DM8400A/2 G
  • Item package quantity: 1
  • Platform: PC
  • Memory RAM technology: DRAM, DDR2 SDRAM
  • Form factor: DIMM 240-pin
  • Memory storage capacity: 2 GB
  • Memory speed: 533 MHz
  • Memory specification compliance: PC2-4200
  • Warranty: limited lifetime warranty
  • Equivalent OEM part number: DELL A0515351

  
  

  

  Rowby,

  This is probably the module you are looking for:

  Kingston ValueRAM KVR800D2E5 / 2G

• white macbook 6.1 10.6.8 (4 GB SSD 512 RAM) which is the best os upgrade for me

  white macbook 6.1 10.6.8 (4 GB SSD 512 RAM) which is the best os upgrade for me

  Computer works wonders but new applications are not supported by 10.6.8

  Unless you have a specific reason to choose one plus one, El Capitan.

  (144668)

• Best practices for the iPhone memory models?

  I'm getting an iPhone 6. I could only afford the lowest memory 16 GB option.

  I know that I'll need more. But, in my mind, I say to myself, I know that I will not need all the applications that I have on my iPad on the phone.
  Just critical stuff.
  I can also shunt images for Google Drive, I have unlimited with. So they are not stored on the phone.
  Music, I'm more worried.

  How do they manage others having a low memory iPhone? Tips? etc.

  Most people will create a playlist in iTunes and then just synchronize this individual playlist on the phone. Select the music you want, or you can create a playlist of your most played songs. Be creative and even once, just sync this playlist rather than your entire library.

• What is the max memory for an iMac in early 2008

  What is the max memory for an iMac in early 2008? MacSales.com shows a 6 GB kit, but crucial only shows a 4 GB kit.

  Thank you

  John

  The computer iMac (early 2008) has two SDRAM slots in the bottom of the computer and comes with at least 1 GB DDR2 SDRAM installed into a slot. The maximum amount of RAM you can install in the computer is 4 GB (a 2 GB SO-DIMM in each slot).

  Source:

  iMac (early 2008): specification of memory - Apple Support

• If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  If win 2003 is upgraded for the 2008 edition, it will fix alingment compensate for the problem with the SAN disks?

  Hi elvirkaric,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• What is the maximum memory for this computer what kind

  I want to restore my system like new or factory but I have no disk what the best thing to do and what is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

  What is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

  Maximum RAM

  2 GB

  http://support.Dell.com/support/eDOCS/systems/dsleest/specs.htm#memory

  Note: the manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

  Usually, just by pressing F11 continuously during the computer startup to display a boot menu offering the option you need.

  You may need to contact the manufacturer of your hardware (Dell) to see what options they have to repair Windows.

  UTC/GMT is 20:35 on Saturday, May 26, 2012

• How to upgrade the virtual memory on my Dell Dimension 3000 running XP, now that I've upgraded to 2 GB RAM

  OK Hi everybody I have a Dell Dimension 3000 desktop pc / and I am running windows xp. in any case, I use to have 512 MB of ram but now I updated and I have 2 GB of ram. But before I updated I had in my performance, then the virtual memory settings and my custom settings it what should I change them for now to get me 2 GB of faster ram PLS HELP!
  * original title - PLS help me with my ram! *

  Set virtual memory to "System Managed size".