The use of AddressBookArguments to call contacts request to add a new contact

Similar Questions

• Help, please! Problem in the use of http to call the url?

  Hello

  I develop application for Blackberry 8830, which is the cdma device. I want to develop the application that uses the http protocol to call url and gets the response. To use http everything I read there about 5-6 ways. But the only one that fits my needs is direct TCP. But my service provider in India i.e. Auntie Indidcom says that there can be no adjustments to the AFN for CDMA phones. What should I do now. I don't really know if that's the only problem.  I have this thread

  Different ways to connect with Http.

  There are six ways mentioned below: -.

  1 blackberry Enterprise Server with Blackberry MDS - I have Blackberry Enterprise server, so this is not possible.

  2. blackberry Internet Service - for this, the Alliance with the RIM so still no thuought on this subject.

  3 order TCP - do not get the APN settings

  4 WiFi network - I'm not network Wi - Fi is also to the equation.

  5. WAP Gateway - not looked into this yet.

  The only way I thought direct TCP, but it requires settings APN, but the message that I received from the people of Auntie, it's that the APN settings is supported for GSM based phones and not for CDMA phones. So is it possible, if yes, then please let me know, its urgency.

  Here is the code that I use for the connection.

  HttpConnection httpConnection = null;
              DataInputStream dis = null;
              DataOutputStream dos = null;
              url = "http://mailonphone.com:8180/automaticlicensing/LicensingServlet?" +
                    "UserName=ilesh&Password=ilesh123&SiteCode=012345678901234567890&" +
                    "ScratchCard=05533978;deviceside=true";
              System.out.println("URL=>" + url);
              try
              {
                  httpConnection = (HttpConnection)Connector.open(url, Connector.READ_WRITE);
                  httpConnection.setRequestMethod(HttpConnection.POST);
                  InputStream istrm = httpConnection.openInputStream();
                  String resMsg = httpConnection.getResponseMessage();
                  System.out.println("REsponse Message=" + resMsg);
                  int length = (int)httpConnection.getLength();
                  String str;
                  if (length != -1)
                  {
                      byte servletData[] = new byte[length];
                      istrm.read(servletData);
                      str = new String(servletData);
                  }
                  else  // Length not available...
                  {
                      ByteArrayOutputStream bStrm = new ByteArrayOutputStream();
                      int ch;
                      while ((ch = istrm.read()) != -1)
                          bStrm.write(ch);
                      str = new String(bStrm.toByteArray());
                      bStrm.close();
                  }
                  System.out.println("Registeration Key=>"+str);
                  int in=str.indexOf("");
                  int en=str.indexOf("");
                  key=str.substring(in+6,en);
                  key=key.trim();
                  System.out.println("KEy="+key);
              }
              catch(Exception ex)
              {
                  System.out.println("Error while calling url");
                  key = "In catch while calling url";
                  //sendMenuItem.setText("Message not send");
              }
          }
  

  If there is a problem in the code then let me know also. I could not test this even on the MDS do not work on simulator emulator. Look into that, but if its related to another question please let me know.

  Thank you & best regards

  Sunil

  The exception it throws in wrestling, will give you an idea about the problem.  I suspect something is wrong with your data, for example, you have specified HttpConnection.POST, but you provide no post data, so I think that you really wanted to say HttpConnection.GET.

  WAP 2.0 does not work on the Simulator.

  I recommend that you get your code work using the Simulator (i.e. ";) deviceside = true') until you are exposed to problems trying to connect on a real device.

• The use of Icloud to synchronize contacts

  When you use icloud to sync contacts and calendar in Microsoft office outlook, you can edit a contact on my iPhone or ipad and it will automatically update in outlook on my laptop?

  Hey there, squill,.

  I understand that you have a few problems with iCloud and Outlook integration. I have an article with a few troubleshooting steps that may help you, and it is below:

  Get help using Outlook with iCloud for Windows - Apple Support

  https://support.Apple.com/en-us/HT204571

  Thank you for using communities Support from Apple. Have a good!

• Question about the use of SQLLDR to load a date column in a new format.

  Hello.
  
  I'm having a problem using SQLLDR which is really starting to annoy me. We are running Oracle 10.2.0.4 and I am trying to load the data into a flat file generated by Excel in using SQLLDR table. The problem I have is that the date in the flat file column is in the format: DD/MM/YYYY and the user wants the data to be in format: YYYYMM
  
  Here's a copy of my control file:
  
  DOWNLOAD THE DATA
  INFILE 'c:\temp\DESKTOP_DATA.txt '.
  ADD
  IN THE OPCTI TABLE. PERF_LEVEL
  FIELDS TERMINATED BY "" "
  trailing nullcols
  (CUSIP,
  DATE_AS_OF ' TO_DATE (: DATE_AS_OF, 'YYYYMM'). "
  ONE_MO_DELINQ_30_59,
  ONE_MO_DELINQ_60_PLUS,
  ONE_MO_BANKRUPT_RATE,
  ONE_MO_FORECLOSURE_RATE,
  ONE_MO_REO_RATE,
  ONE_MO_DELINQ_60_89,
  ONE_MO_PRIN_RECOVERY,
  ONE_MO_PRIN_LIQ,
  ONE_MO_COLLAT_BAL,
  CURRENT_CREDIT_SUPPORT,
  ONE_MO_CDR
  )
  
  And when I call SQLLDR, I get the following message:
  
  Sheet 1: Rejected - error on the OPTCI table. PERF_LEVEL, the DATE_AS_OF column.
  ORA-01858: a non-digit character was found here where was waiting for a digital
  
  Any idea on what I'm missing? When I started, it seemed to be quite simple.
  
  Thank you!

  so you want to take the character input, convert it to a date and then convert back to a different character format.

  Select to_char (to_date (12 November 09 ',' MM/DD/YY '), "YYYYMM") twice;

  200911

  Try something like that.

• Inspiron 660: How to open the CD/DVD drawer to add a new program, or watch a movie?

  Inspiron 660.  How can I open the drawer to insert a disk in order to add a new program or watch a movie?  I just bought the machine and find operating instructions very careless.  There is no mechanical button to open the drawer. I can't find any instructions on the use of this machine in Dell.  Windows 8 tells me to insert the disc.  But how?

  The button is right next to the plate... Had to look a little myself.

• Can I add a new trigger to the beginning rather than at the end of a blank publication widget?

  Hi guys,.

  I am creating a page of photo gallery using the widget a blank publication. I want to be able to add new content on a regular basis by adding new pictures to the top (beginning) of the gallery for my most recent photos indicate at the beginning of the gallery.

  Currently, the small + symbol to add another trigger doesn't add a new trigger to the right (bottom) of the trigger group, putting actually newly added content to the rear of the gallery rather than at the front. I am able to get to add a new trigger in the Group and have that trigger to be first in the group to display?

  The widget seems to display the same behavior of the command, so I'm pretty stuck on how to work around this problem. I tried to re - arrange triggers, which became incredibly heavy but everytime I want to add new photos in the Group and move older further down in the order of the gallery.

  Any help would be greatly appreciated with this, cheers, David.

  Hi David

  With composition, adding the image would be as well as the addition to use the most (+) sign which will add next to the previous content.

  At this stage, you would have to re - arrange the triggers or you can display them randomly if you want not to re - organize. Those are the only options.

  Thank you

  Sanjit

• Titles and effects in Windows Movie Maker transition are passed in the movie when you try to add a new video

  Cannot add a new item at the beginning of the video - Please HELP! __

  Hello

  I edited a video in WMM, registered, it's all good.

  now, I need to add a little extra clip at the beginning of the recorded movie. but when I have to add to the beginning (I just drag and drop it at the beginning), it seems to push all my effects of transitions and titles forwards in the film. If the titles that are supposed to before some clips are now pushed more in other clips or clips that appear later in the film!

  is there a way to avoid this problem?

  I appreciate any help!

  Thank you
  jump

  Hello

  I edited a video in WMM, registered, it's all good.

  now, I need to add a little extra clip at the beginning of the recorded movie. but when I have to add to the beginning (I just drag and drop it at the beginning), it seems to push all my effects of transitions and titles forwards in the film. If the titles that are supposed to before some clips are now pushed more in other clips or clips that appear later in the film!

  is there a way to avoid this problem?

  I appreciate any help!

  Thank you
  jump

  =====================================
  If publish you (save) project in the format of video .wmv
  in a folder on your drive hard drive... and then reimport the .wmv
  film of the file and drag it on the timeline (as a new project)...
  the items will be more separated and you can add
  your new clip at the beginning without disturbing anything.
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to get the contact details of the contact list to the use of the incoming call number?

  Hello

  I need callid, name, name of the company from the list of contacts to the use of the incoming number. If anyone has a solution please reply me as soon as possible.

  I have code below

  void ApplicationUI::onCallUpdatedd(const bb::system::phone::Call &call)
  {
      CallState::Type state = call.callState();
      //qDebug() << "call updated: callId=" << call.callId() << " callState="
      //  << state;
      if (state == bb::system::phone::CallState::Connecting
              || state == bb::system::phone::CallState::Connecting) {
          qDebug() << "call connecting";
      } else if (state == bb::system::phone::CallState::Connected) {
          qDebug() << "call connected";
      } else if (state == bb::system::phone::CallState::Failed) {
          qDebug() << "call Failed";
      } else if (state == bb::system::phone::CallState::Disconnected) {
          qDebug() << "call Disconnected";
      } else if (state == bb::system::phone::CallState::Incoming) {
          qDebug() << "call Incoming";
      } else {
          qDebug() << "Invalid";
      }
  }
  

  then, how I got the calling detail like number, name, company ect... call id?

• You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  What does this message mean? I get when I click on the icon to evaluate files on another of our computers. "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  The other computer has not been configured to allow remote access to this folder from your account.  You'll want to go to this other computer, right click on the folder that is shared and go to properties, then set the appropriate security settings to allow access.

• What is the use of RAS calling card?

  What is the use of RAS calling card? And how do I uninstall?

  Hello coco Amaravadi,

  Given that the problem is related to the RAS asynchronous card, it would be better suited on the TechNet support forum. I suggest you post your question on the following link.

  http://social.technet.Microsoft.com/forums/en/categories/

• BlackBerry Z10 well defined, I can't get the phone to ring and vibrate as the default value for all calls. I can put individual contacts, but I want to ring and vibrate for all.

  Although the value, I can not phone ring and vibrate as the default value for all calls. I can put individual to vibrate and ring contacts and it works but I want as the default for all incoming calls. Any help would be appreciated, thanks

  Sorry, I found the answer in the manual

  "Change your ringtone, sounds or alerts.

  GoTo settings\notifications to the bottom of the screen select application\phone

  You can activate vibrate out there, put the ringer default etc.

• COMPUTER is not available. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  Original title: cannot add homegroup printer

  Cannot add printer homegroup.  I tried everything I can think of without success.  I have laptop which is part of my home group who can't create a link to a printer attached to another computer.  The search for the printer does nothing.  When I try to add manually, when I click on the computer that hosts the printer, I get the following:

  "[Computer SCIENCE] is not available.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The specified network provider name is invalid.

  The problem seems to exist in the computer on which I am trying to add the printer, not the host, as I was able to add another computer to the host without problem.

  Help would be appreciated.

  Thank you.

  Hi Ryan,

  Thanks for the quick response.

  I suggest to change firewall security settings, or disable the security software on the system and try to access the location.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  For more information, you can visit the link below where the client came the similar problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/955717b7-9ea3-424C-9b3a-719520f1b043

  Hope this information is useful.

• I have questions on the use of the commercial license... Which forum should I use to get answers or how I can get in direct contact with adobe?

  I have questions on the use of the commercial license... Which forum should I use to get answers or how I can get in direct contact with adobe?

  I have my answers! The chat feature did not work well... But I had contact, so everything is good now!

  Thanks again!

• I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  Note: I'm able to get two phones to ring with an incoming call, but the 5s consist not out. Whenever I dial a number, it says call failed.

  Do not dial a number. Try to choose a contact in the contacts App and tapping on telephone button.

  That said, I don't think that outgoing calls work on continuity since another iPhone. given that the iphone is designed to make calls through its own service.

  Document to support that you just did not mention calls from a secondary iPhone at all, it points to Mac, iPad and iPod touch, which leads me to believe that it won't work.

  It runs from devices such as iPads and Macs, who have no other way to place a cell call.

• not able to install the driver mx NIDAQ (for the use of USB-6008) in my laptop, NIDAQ902f0? any solution...

  I am not able to install driver of mx NIDAQ (for the use of USB-6008) in my laptop,... well NIDAQ902f0 want to give any suggestion...

  Following message comes when I run the Setup... (installation program downloaded from the website OR..)

  Runtime error:

  This application has requested to terminate in an unusual way.

  Please contact the application support is more information.

  Title of the dialog box is "Microsoft Visual C++ runtime library"

  Is the same when NIDAQmx 7.5 is tried to install from the CD that came with the USB-6008.

  Double post