Error occurred during the attempt to eject the DVD RW. Eject a door opens, but the tray will not come out.

Similar Questions

• my door on the cpu does not open when I press the button and the tray will not come out if I can put my cd. That is what it is?

  my door opens to a cd in. what's up?

  Hello

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Occasional exception error occurs during the execution of a COM object.

  I am running Coldfusion 8 and search of addresses through the Mailroom Satori software database architect.
  
  6 times out of 10 the address returned, but other attempts to achieve what follows:
  
  An exception occurred when executing a COM method
  
  The cause of this exception was: AutomationException: 0 x 80040400 - Unknown exception in SearchAddress. in MRTKUKLib.MRTKUKPostCode.1
  
  I reinstalled the software architect and ensured that the COM objects are registered. I am puzzled, how it can work frequently, but then sometimes fail. I'm running a high volume website, this could be a problem?

  Possible.

  It could also be choking on something in the data that you send to the COM object. I would surround the code that calls the COM object with an error handler that automatically sends you the address information that you send to the mailroom architect when he chokes. See if you notice any model. Could be a number sign in the address or an apostrophe wandering? or maybe even a few non-ASCII text?

• Hello! I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure. What can I do?

  Hello!

  I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure.

  What can I do?

  Save the relevant keys, then search your registry at HKCU\Software\Adobe\Director\12\Script

  If this does not help, save the entire branch and try to delete it

• I get an error occurred during the attempt to access the service

  I get. An error occurred during the attempt to access the service

  Hey Joe,

  Please update your Adobe Acrobat Reader CD player.

  You can also use export PDF files web service: https://cloud.acrobat.com/exportpdf

  Kind regards

  Rahul

• I am trying to convert a pdf to Word and continue to receive an error message "year error occurred during the attempt to access the service.  Any suggestions?

  I am trying to convert a pdf to Word and continue to receive an error message "year error occurred during the attempt to access the service.  Any suggestions?

  Hey lee,

  Are you still facing this problem?

  Have you tried accessing the service by using the browser: http://cloud.acrobat.com/exportpdf

  Kind regards
  Rahul

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.

  Following error message encountered when installing SSO64 bits on Windows Server 2008 R2 Standard 64-bit edition.

  Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.
  [12:40:34 of Info] List MessageBox with text: Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC. Return code: 1

  I tried to reinstall VC ++ 2005 SP1 Redistributable, but it did not work.

  I tried to rename a folder for vc ++ in the winsxs folder, but without permission to do so.

  Here's the Setup log:

  = Recording started: 01/03/2012-12:40:11 Build type: SHIP UNICODE 5.00.7600.00 appeal process: C:\Users\SA_KPN~1\AppData\Local\EBZ28334.tmp\Setup.exe =.
  MSI (c) (C0:58) [12:40:11:525]: Resetting cached policy values
  MSI (c) (C0:58) [12:40:11:525]: value of strategy Machine 'Debug' is 0
  MSI (c) (C0:58) [12:40:11:525]: * RunEngine:
  Product: SSO x64\SSO64\SSO64.msi
  Action:
  Command line:
  MSI (c) (C0:58) [12:40:11:525]: Client and UI is none or basic: full installation running on the server.
  MSI (c) (C0:58) [12:40:11:525]: grabbed execution mutex.
  MSI (c) (C0:58) [12:40:11:525]: Cloaking enabled.
  MSI (c) (C0:58) [12:40:11:525]: attempt of activation of all disabled privileges before calling install on server
  MSI (c) (C0:58) [12:40:11:525]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C AC:3) [12:40:11:525]: running the installation inside the multi-package transaction \SSO x64\SSO64\SSO64.msi
  MSI (s) (C AC:3) [12:40:11:525]: grabbed execution mutex.
  MSI (s) (AC:64) [12:40:11:525]: Resetting cached policy values
  MSI (s) (AC:64) [12:40:11:525]: value of strategy Machine 'Debug' is 0
  MSI (s) (AC:64) [12:40:11:525]: * RunEngine:
  Product: SSO x64\SSO64\SSO64.msi
  Action:
  Command line:
  MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (AC:64) [12:40:11:540]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 1
  MSI (s) (AC:64) [12:40:11:540]: SRSetRestorePoint is ignored for this transaction.
  MSI (s) (AC:64) [12:40:11:540]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement: 0
  MSI (s) (AC:64) [12:40:11:540]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3:2
  MSI (s) (AC:64) [12:40:11:571]: file will have the applied safety of OpCode.
  MSI (s) (AC:64) [12:40:11:587]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> 'SSO x64\SSO64\SSO64.msi' against the software restriction policy
  MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi has a digital signature
  MSI (s) (AC:64) [12:40:21:603]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi is allowed to run at the level of authorization 'unlimited '.
  MSI (s) (AC:64) [12:40:21:603]: dialogue of end not activated
  MSI (s) (AC:64) [12:40:21:603]: original ==> SSO x64\SSO64\SSO64.msi packing
  MSI (s) (AC:64) [12:40:21:603]: we're running out of ==> C:\Windows\Installer\1ebf5f91.msi package
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: replacements of compatibility mode properties found.
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (AC:64) [12:40:21:619]: MSCOREE already loaded, using the loaded copy
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'TransformsSecure' is 1
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisablePatch' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'AllowLockdownPatch' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableLUAPatching' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableFlyWeightPatching' is 0
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (AC:64) [12:40:21:619]: transformations are not secure.
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is ' C:\Users\acc\AppData\Local\Setup(030112 124011) .log.
  MSI (s) (AC:64) [12:40:21:619]: command line: ADDLOCAL = froot, server, SSOMMC, Admin, Pwdsync INSTALLDIR = c: Files\Enterprise Single Sign - dans\ FILESINUSEERROR = CURRENTDIRECTORY=C:\Users\acc\AppData\Local\EBZ28334.tmp CLIENTUILEVEL = 3 MSICLIENTUSESEXTERNALUI = 1 CLIENTPROCESSID = 3776
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding PackageCode property. Its value is '{824AA89B-CCCC-4D40-A6D3-71DF21FEE110} '.
  MSI (s) (AC:64) [12:40:21:619]: Product Code passed to Engine.Initialize: "
  MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties before transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
  MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties after transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
  MSI (s) (AC:64) [12:40:21:619]: unregistered product: first start installation
  MSI (s) (AC:64) [12:40:21:619]: product {F89B22BC-2768-4237-B300-5CFA52D9AC84} is not supported.
  MSI (s) (AC:64) [12:40:21:619]: MSI_LUA: invites of credentials not required, the user is an administrator
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding ProductState property. Its value is '-1'. '.
  MSI (s) (AC:64) [12:40:21:619]: entering CMsiConfigurationManager::SetLastUsedSource.
  MSI (s) (AC:64) [12:40:21:634]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (AC:64) [12:40:21:634]: adding new sources is allowed.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding PackagecodeChanging property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: Package name extracted from package path: 'SSO64.msi '.
  MSI (s) (AC:64) [12:40:21:634]: package be registered: "SSO64.msi."
  MSI (s) (AC:64) [12:40:21:634]: Note: 2 1: 2262: AdminProperties 3:-2147287038
  MSI (s) (AC:64) [12:40:21:634]: Machine policy value 'DisableMsi' is 1
  MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'AlwaysInstallElevated' is 0
  MSI (s) (AC:64) [12:40:21:634]: "AlwaysInstallElevated" user policy value is 0
  MSI (s) (AC:64) [12:40:21:634]: product installation will be high because the user is admin, and the product is to be installed by computer.
  MSI (s) (AC:64) [12:40:21:634]: the product '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' is running with elevated privileges: product is affected.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding ADDLOCAL property. Its value is "froot, server, Admin, SSOMMC, Pwdsync.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding INSTALLDIR property. Its value is "C:\Program Files\Common Files\Enterprise Single sign-dans\ '."
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is 'C:\Users\acc\AppData\Local\EBZ28334.tmp '.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '3'.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MSICLIENTUSESEXTERNALUI property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is "3776".
  MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
  MSI (s) (AC:64) [12:40:21:634]: MANAGER of REBOOT: disabled by the property MSIRESTARTMANAGERCONTROL. Windows Installer uses the built-in functionality of FilesInUse.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: TRANSFORMS property is now:
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Favorites
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Network shortcuts
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Documents
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Printer shortcuts
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Recent
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\SendTo
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Templates
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\ProgramData
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Local
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Pictures
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu\Programs\Administrative C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start of Directors
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start start\program
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Desktop
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
  MSI (s) (AC:64) [12:40:21:650]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding USERNAME property. Its value is 'KPN '.
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is 'KPN '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\Windows\Installer\1ebf5f91.msi '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is "SSO x64\SSO64\SSO64.msi.

  ..............................

  ................................

  Property (S): GPTSupport = 1
  Property (S): OLEAdvtSupport = 1
  Property (S): ShellAdvtSupport = 1
  Property (S): MsiAMD64 = 6
  Property (S): Msix64 = 6
  Property (S): Intel = 6
  Property (S): PhysicalMemory = 3840
  Property (S): VirtualMemory = 4312
  Property (S): AdminUser = 1
  Property (S): MsiTrueAdminUser = 1
  Property (S): LogonUser = acc
  Property (S): UserSID = S-1-5-21-1305377269-4159824490-449157577-297538
  Property (S): UserLanguageID = 1033
  Property (S): ComputerName = W1613
  Property (S): SystemLanguageID = 1033
  Property (S): ScreenX = 1024
  Property (S): ScreenY = 768
  Property (S): CaptionHeight = 19
  Property (S): BorderTop = 1
  Property (S): BorderSide = 1
  Property (S): TextHeight = 16
  Property (S): TextInternalLeading = 3
  Property (S): ColorBits = 32
  Property (S): TTCSupport = 1
  Property (S): Time = 12:40:37
  Property (S): Date = 01/03/2012
  Property (S): MsiNetAssemblySupport = 2.0.50727.4927
  Property (S): MsiWin32AssemblySupport = 6.1.7600.16385
  Property (S): RedirectedDllSupport = 2
  Property (S): MsiRunningElevated = 1
  Property (S): The privilege = 1
  Property (S): Name of USER = KPN
  Property (S): COMPANYNAME = KPN
  Property (S): basis of DATA = C:\Windows\Installer\1ebf5f91.msi
  Property (S): OriginalDatabase = SSO x64\SSO64\SSO64.msi
  Property (S): UILevel = 2
  Property (S): MsiUISourceResOnly = 1
  Property (S): Preselected = 1
  Property (S): ACTION = INSTALL
  Property (S): AccountAuthenticatedUsers = authenticated users
  Property (S): AccountCreatorOwner = CREATOR OWNER
  Property (S): AccountPowerUsers = power users
  Property (S): AccountUsers = Users
  Property (S): ROOTDRIVE = D:\
  Property (S): CostingComplete = 1
  Property (S): OutOfDiskSpace = 0
  Property (S): OutOfNoRbDiskSpace = 0
  Property (S): PrimaryVolumeSpaceAvailable = 0
  Property (S): PrimaryVolumeSpaceRequired = 0
  Property (S): PrimaryVolumeSpaceRemaining = 0
  Property (S): INSTALLLEVEL = 1
  Property (S): Complus_XML_Data =

  Property (S): SOURCEDIR = SSO x64\SSO64\
  Property (S): SourcedirProduct = {F89B22BC-2768-4237-B300-5CFA52D9AC84}
  Property (S): ProductToBeRegistered = 1
  MSI (s) (AC:64) [12:40:37:260]: Note: 1: 1708
  MSI (s) (AC:64) [12:40:37:260]: product: Microsoft Enterprise Single Sign-On - the Installation operation failed.

  MSI (s) (AC:64) [12:40:37:275]: Windows Installer installed the product. Product name: Microsoft Enterprise Single Sign-On. Product version: 6.0.0245.0. Product language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.

  MSI (s) (AC:64) [12:40:37:275]: see clean files/packages, if there
  MSI (s) (AC:64) [12:40:37:275]: MainEngineThread returned 1603
  MSI (s) (C AC:3) [12:40:37:275]: sequence number number for this installation system restore.
  = Logging stopped: 01/03/2012 12:40:37 =.
  MSI (s) (C AC:3) [12:40:37:275]: strategy user 'DisableRollback' is 0
  MSI (s) (C AC:3) [12:40:37:275]: policy value 'DisableRollback' Machine is 0
  MSI (s) (C AC:3) [12:40:37:275]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C AC:3) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (C AC:3) [12:40:37:275]: restoration of the environment variables
  MSI (s) (C AC:3) [12:40:37:275]: object to destroy RemoteAPI.
  MSI (s) (C AC:3) [12:40:37:275]: end of thread Custom Action Manager.
  MSI (c) (C0:58) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (c) (C0:58) [12:40:37:275]: MainEngineThread returned 1603
  = Recording stopped: 01/03/2012 12:40:37 =.

  Hello Philippe Gupta.

  Since the question you posted is on a Windows Server 2008-based computer, the question would be better suited on the TechNet support forum. Then I suggest you to post the question on the following link.

  http://social.technet.Microsoft.com/forums/en-us/newThread

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• Windows Vista cannot install Itunes. An error occurred during the installation of assembly HRESULT:0 x...

  * Title *.
  An error occurred during the installation of assembly ' Policy.8.0.Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32-policy", publicKeyToken = "1fc8b3b9a1e18e3b" processorarchitecture = "x 86". See Help and Support for more information. HRESULT:0 x...

  I tried everything that you guys mentioned here http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/windows-7-unable-to-install-itunes-an-error/1099136a-03df-4da4-966c-5a4e56b8f202?page=1&tab=AllReplies&tm=1318189137621 but I do not have file of the registry size limit.

  I also tried these solutions http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/an-error-occurred-during-intstallation-of-assembley/7a2c7cfd-1e0f-40c4-bf96-896134ecda51?tm=1318188952925, but I still have an error during the installation of Microsoft Visual C++ 2008 Redistributable Package (x 86). Error is:

  Error 1935

  "Microsoft.VC80.ATL.type ="win32".version ="8.0.50727.4053".

  "publicToken ="1fc8b3b9a1e18e3b.processorArchitecture ="amd64" '. I tried with Microsoft .NET Framework, but it does not work eather.

  I try 2 days to install itunes without success...

  Any help, please?

  Run the SFC/scannow using the Administrative Mode command prompt

  Attempt to open the CBS log

  Open Run - type the following and press OK

  %windir%\Logs\CBS

  Look for entries stating can not repair and note the file name

  If it does not repeat the steps listed in my previous post to open the CBS log in Notepad

  Startup Repair - analyzes your installation of Windows Vista for issues and fixes

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

• Error: An error occurred during the installation of the Assembly HRESULT: 0 x 80070002 during installation of iTunes 9.2.1

  Original title: iTunes error. Help, please? I'm desperate... (I posted this on Yahoo Answers, too, but I have received no help, so I go here)

  Hello

  I am trying to install iTunes 9.2.1 (for Vista 64-bit) on my laptop Vista x 64 bit. Whenever I have try and download it, however, it gives me this error: "an error occurred during the installation of assembly" Microsoft.VC80.CRT, version = "8.0.50727.4053", type = * win32 ", publicKeyToken ="1fc8b3b9a1e18e3b"," processorArchitecture ="x 86". See Help and Support for more information. ' HRESULT: 0 X 80070002.

  Here is a picture:

  http://i37.Tinypic.com/144brrp.jpg

  I tried to solve it using various methods like using 7 - zip, download Microsoft Visual c ++ 2005, etc., but they do not seem to work... I don't have iTunes on my PC yet, just setting up because the facility retains default. Can someone help me please? I'm desperate...

  Here are the links that I tried to do my iTunes to work:

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/thread/beeceb19-69cc-4044-94F0-591feec04626/

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/c1359ee5-e18d-4512-8BFF-890936db2810

  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/f4dd5033-9bcb-4788-B100-5e98bd80f6bf

  Hello myducks,

  To answer your question about the SFC command, follow these steps:

  First of all, we run System File Checker to see if you have a corrupt file system.

  Click Start
  Open an elevated command prompt.

  To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  At the command prompt, type the following command and press ENTER:

  SFC/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Then restart your system.

  Please see the article (KB) knowledge base if you find corrupted files:
  Article 929833 - how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  If you were able to successfully run the SFC, then run chkdsk:
  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  In this forum, we are unable to connect to your computer remotely to help solve your problem. However, if you feel you need more support, you may want to open a business of pension paid with Microsoft. I will include the support options below, so you can choose yourself.

  http://support.Microsoft.com/default.aspx?scid=fh;en-us; CNTACTMS

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Try to update via iTunes.

  See you soon,.

  GB

• Why do I get the message 'a network error occurred during the processing of your order'?  I was able to print an album without problem about a month ago

  I am trying to print a photo book, but get the message "a network error occurred during the processing of your order.  Please check your network connection and try again.  I had no problem with the printing of a book about a month ago.

  Start in Safe Mode, Mac OS x: Safe Mode bootand try to order from there.

  Don't forget to check out the book before ordering this Apple; Get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Apple Support. Save the PDF to be compared with the printed version when coming out.

  

• Full backup impossible. An error occurred during the creation of the backup folder.

  Having had a HARD drive failure and have replaced I have now bought a WD 3 to WD My Book for Mac. Plug and put in place to save. However will not achieve, and gives this error message

  Full backup impossible. An error occurred during the creation of the backup folder.

  Does anyone else have this problem?

  Paul

  How the drive is formatted?

• After download, ' an error occurred during the preparation of the installation.

  Ok.  I'm not very good with computers, so I'm going to do my best here:

  I downloaded El Capitan last night, did the installation and rebooted.  The questions endless gray on the screen.  Relaunched in LANDAU several times; Install still 'stuck' 31 minutes downloading - every time.  Restarted in safe mode; install 'stuck' 24 minutes - every time.  I did the safe mode--> reinstalling OS X, which then made me download 'additional components' and then restarted automatically.  That put me right back to get 'stuck' to 24 minutes Setup.

  I could then go back to my previous OS X 10.7.5 then in safe mode (I don't remember how).  I have so found the OS X 10.11 El Capitan install file in my applications folder, tried running the installer again and got "an error occurred during the preparation of the installation.  Try to run the installation again. "I tried several times over with no different results.  I checked the date in the terminal; It is correct.  So I deleted the application (ten hours later!). Re-uploaded El Capitan on the App Store on the day the next day and just tried to run the installation program and still get "an error occurred during the preparation of the installation.  Try to run the installation again. »

  I do not have a "clean"... installation I didn't really know what it was before all these questions.  All my stuff is backed up via Time Machine on an external hard drive that...

  Any advice would be so appreciated.  I am at a loss at this point.

  Thank you!

  So, everything was OK, two days ago? On Lion OS?

  Of course, there was a hiccup during the installation. you said "makes installation and restarted."

  During the installation (Setup in the applications folder), it restarts after installation, it installs effectively while restarting. So I guess the installation never finished, maybe because you the restarted.

  This means that your operating system 'old' is always on it, but not completely healthy because of the "accidents" caused by ElCapitan failure install.

  So I propose:

  Connect your Time Machine disk (when not connected), start in the RecoveryPartition Time Machine restore, choose a date before that you tried to install ElCapitan, let him finish completely, it restarts automatically (I think). Then you are back where you started.