The use of Get - view instead of Get - VM for the advanced settings of a virtual computer

Similar Questions

• Get the content of the field "Annotation" of a virtual computer

  I can get the content of the field "Annotation" in the tab "Summary" of a virtual computer using the .notes property.

  Think the contents of the field as:

  First line

  Second line

  Fourth line

  Fifth line

  In this case, the .notes property returns a single string.

  Looking inside the string I get I see the contents of the first line, a HEX '0A' character, the content of the second line, another character HEX '0A' and so on.

  How can I get the content of each individual line?

  Concerning

  Marius

  One solution is to cut the string as = $b $a.Split([char]0x0a)

  Then read the lines simple as $b.item (n) beginning with index 0. $b.count returns the number of lines.

  André

• How to access the advanced settings of the BIOS?

  Hi I have a computer laptop sony vaio SVE14125CLB BIOS insydeH20 Rev 3.7

  When you get into the BIOS I have just a few options and I need to access the advanced settings I know they exist but are locked somehow. How can I access them?

  are there any special combination key?

  It's really a pain for not having access to something you have paid...

  Thank you

  Hello

  It is hidden so that changes cannot be made that could affect how it interacts with the computer and possibly cause a problem in the future. What type of problem are you having with your VAIO which requires to enter BIOS advanced settings? Thank you.

• How can I find TLS1.1, TLS1.0 and and TLS1.2 in the advanced settings

  So I'm turning on cups I can access a certain website but I can't find where they are in the advanced settings

  you have to scroll down on the settings tab / advanced internet Internet explore

• HPE-210y; trying to get into the advanced settings of the bios to change the setting of the fan

  Hello

  Model # HPE - 210Y

  Product # BK170AA-ABA

  BUILD with ID AINAv6PRA6

  CARD MOTHER-HRS880-ΜATX

  BIOS VERSION 5.09 22/01/10

  BASIC 08.00.15 VERSION

  I have a small problem when I start my computer it gives me an error: System fan has failed. Press F2

  Well my system fan works very well done any tests on old tried on slow corners fan connector

  another connector revved at full speed. I reset CMOS changes that the battery took all the memory, video card

  and everything cleaned with air. the usual steps.

  I asked around and technicians say the problem could be in the bios settings of fan cpu (quiet mode). Everyone says

  Press f1 or f10 to get into the bios Setup. go to the Advanced tab and scroll down. but for the life of me I can't find it. I know my computer if it is safe, but it's a pain to have to press f2, whenever the computer must restart

  If anyone can help pleaseeeeee

  Thank you

  Hello

  lonee37 wrote:

  Hello

  first of all thanks for the suggestion about the Nice program trying to core temp

  I replaced the temp of problem system always the same fan has not gone above 73 F

  so I guess I'll have to talk to HP to get it solved

  

  Thank you once again for youy help

  Thaose temperatures very well. Does not even begin to worry until you start to see time @140 degrees F.

  That's well below Tj Max.

  I used to use centigrade. If the temperature is close to that you certainly can't expect much better than this.

  Best regards
  ERICO

• Find the advanced settings of vm

  I need to see what avancΘs vm is on a set of virtual machines.  I have a file with a list of advanced format csv as below.  How can I apply these out parameters for a virtual machine?  by default, I think that most of them does not exist on the virtual machines until this only added, but I would like to take this list and the list that exist on a list of virtual machines.

  for example

  $vm = get - VM myvm | Get-advancedsetting (get all the advanced list settings)

  ConfigurationParameter,

  isolation.tools.autoInstall.disable,

  insulation. Tools.Copy.Disable,

  insulation. Tools.dnd.Disable,

  isolation.tools.setGUIOptions.enable,

  insulation. Tools.Paste.Disable,

  isolation.tools.diskShrink.disable,

  isolation.tools.diskWiper.disable,

  isolation.tools.hgfsServerSet.disable,

  scsiX:Y.mode,

  vmci0. Unrestricted,

  logging,

  insulation. Monitor.Control.Disable,

  insulation. Tools.ghi.AutoLogon.Disable,

  insulation. BIOS. BBS. Disable,

  isolation.tools.getCreds.disable,

  insulation. Tools.GHI.launchMenu.change,

  isolation.tools.memSchedFakeSampleStats.disable,

  isolation.Tools.ghi.protocolhandler.info.Disable,

  isolation.ghi.host.shellAction.disable,

  isolation.tools.dispTopoRequest.disable,

  isolation.tools.trashFolderState.disable,

  insulation. Tools.ghi.trayicon.Disable,

  insulation. Tools.Unity.Disable,

  isolation.tools.unityInterlockOperation.disable,

  insulation. Tools.Unity.Taskbar.Disable,

  isolation.tools.unityActive.disable,

  isolation.tools.unity.windowContents.disable,

  insulation. Tools.Unity.push.Update.Disable,

  isolation.tools.vmxDnDVersionGet.disable,

  isolation.tools.guestDnDVersionSet.disable,

  isolation.tools.vixMessage.disable,

  floppyX.present,

  ideX:Y.present,

  parallelX.present,

  serialX.present,

  USB. Now,

  RemoteDisplay.maxConnections,

  RemoteDisplay.maxConnections,

  log.keepOld,

  log.rotateSize,

  tools.setInfo.sizeLimit,

  insulation. Device.connectable.Disable,

  insulation. Device.Edit.Disable,

  tools.guestlib.enableHostInfo,

  ethernetn. Filtern.Name = FilterName,

  vmsafe.agentAddress,

  vmsafe.agentPort,

  VMsafe.Enable,

  RemoteDisplay.vnc.enabled,

  $list = get-view - viewtype virtualmachine-property "config. ExtraConfig', 'name ' | Select name, @{n = "AdvOpt"; e = {$_.config.}} ExtraConfig}}

  Then, you will get a collection of objects as

  $liste [0]

  Name                                                                  AdvOpt

  ----                                                                  ------

  VM_NAME {nvram, virtualHW.productCompatibility...

  $liste [0]. AdvOpt and you can see all these options for vm

  You can simply look through the 'key' advopt property to see if something is inside or not

• Is it possible for HA / VMotion to migrate a virtual computer when the fiber of SAN connectivity is lost / Cup?

  Use: Version ESX 4 / vCenter4

  I have a cluster with ESX 4 nodes running HA. I want to know if it is possible for vmotion to migrate a virtual computer if the host on which it lives has a loss of fiber optic connectivity to SAN/back-end storage. I can get VMotion to work when I go unplug the Ethernet cable to the back of the esx host, but when I unplug the fiber connections that will freeze the virtual machine and no migration will happen. Is it possible to do this with VMotion HA? I also tried to use aggressive DRS to see if when I unplug the fiber it lose connectivity and a loss of memory or cpu and migrate... so not happened... the vm always reports to vCenter that memory and cpu have not changed... then DRS don't not kick to migrate the virtual machine.

  Thank you.

  There is no such thing for HA. HA only fires when there is a host or a network isolation fails. DRS also does not realize this. However, there are a lot of events that can trigger an action such as "maintenance mode". don't know if there is a for the failures of way, just check it out. It is described in the following pdf document: http://www.vmware.com/pdf/vsphere4/r40_u1/vsp_40_u1_admin_guide.pdf

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• Increase the disk space on a virtual computer which was extracted

  I have my computer running virtual Windows 7 checked. I then checked back in the VM. I need to increase disk space on drive C (the winSxS directory seems to never stop growing). But there is a snapshot on the disc 'View Local Mode of instantaneous anchorage'. What are the consequences of the removal of the snapshot myself in order to increase the size of the disk? Throw this out of sync between my laptop and the virtual computer and require all of ~ 30 GB to download again?

  Hello
  If a replication extracted from a desktop computer, a snapshot of the local desktop is created and then the changes are replicated with the data center.
  If you delete the snapshot, you ensure that you validate the changes.  This force probably allows you to download all of the Office during the next Check-Out operation.

  Best regards

  Patricio Cerda

• a paging file alert is on start up. I put the advanced settings. restart and the same alert happens. tried to adjust the EMR, that he won't let occurring

  virtual memory will not be set. I've tried everything. I also tried lighting the EMR but the ide ata / atapi does not work according to the instructions. Help

  Hi John abney,.

  Thank you for visiting Microsoft Answers.

  To change the size of virtual memory, follow these steps.
  1. Click Start, select Control Panel and click on system and Maintenance.
  2. click on system.
  3. in the left pane, click Advanced system settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. on the Advanced tab, under performance, click settings.
  5. click the Advanced tab, and then under virtual memory, click on change.
  6. clear him automatically manages the size of pagefile for all drives check box.
  7. under drive [Volume name], click the drive that contains the paging file that you want to change. Click Custom size, type a new size in megabytes in the initial size (MB) or maximum size (MB) box, click on set and then click OK 3 times.

  You can consult the following link: http://windows.microsoft.com/en-US/windows-vista/Change-the-size-of-virtual-memory

  Swati K - Microsoft support technician

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My XP laptop has crashed, now get alerts for purchase advanced, is it a scam?

  I was told to get a module to fix the purchase price of problem 79.50 advanced is it a scam? He said that it is from Microsoft.

  Hi VanNessaMcGuire,

  What is the exact message that you receive?

  The message your description is very similar to what you would get with a fake software security also known as "scareware".  It is a program that appears to be beneficial from a security perspective, but provides little or no security, generates erroneous or misleading alerts, or trying to attract users to participate in fraudulent transactions.

  Please read the following article for more details:

  http://www.Microsoft.com/security/PC-security/antivirus-rogue.aspx

  I suggest strongly through the steps in this article to protect you from fake security software.

  I hope this helps!

• 'Use Open CL' box is grayed out in Preferences > performance > advanced settings

  I confirmed;

  GL = 4.1 version

  The two OS & Photoshop are running 64-bit

  Color documents is defined in RGB; tested on the background layer on.jpg

  My graphics card is ATI Radeon HD 5770 & sure enough I have the latest update installed.

  Help, please...

  Whenever I have install Windows 10 on my work station after finishing install that opengl will be grayed out our if I look in my Photoshop preferences advanced GPU performance setting.   Everything I do is re-install the device driver Nvidia Quadro 4000.  Once I do that if I look at my setting Photoshop preferences advanced GPU performance not only is not grayed out is to check as I took when it was available as an option.  I use 10 window on the fast track, windows setup is a weekly event on my system. I do not uninstall the drivers that perhaps the Nividia Installer. I just used the default installation setting.

  I don't have to uninstall Spacedesk a codec display virtual device driber abd fastpictureviewer and re-install them using whenever I have install and then get an overview of the next windows...

• Cannot expand the hard drive of a virtual computer that is a linked clone.

  I have a virtual machine that is a linked another clone.

  I did a lot of development and changes to the linked clone, and now ran out of disk space.

  Now I want to extend the drive, but I get this error:

  "Disks of virtual machines that are linked clones cannot be extended.

  So I then try to extend the drive of the virtual machine that he was cloned from:

  "Disks of VMS with snapshots cannot be extended. You must delete the snapshots or use VMWare vcenter converter. »

  What can I do? If I remove the snapshots of the original machine, do not lose the 'link' to the linked clone? What he suggested that I use the "VMWare vcenter converter" for?

  Does anyone have a solution?

  Kind regards

  James

  Create a complete clone of the virtual machine in the current state. Which can be extended.

• Pass the 3.5 to 4 virtual computer

  Can anyone suggest an effective method for 3.5-4 VM?

  Vcenter v2.5.0 with ESX 3.5 on a Windows 2003 server, I am able to "Take inventory", but when I try to add another ESX 4.0 host, I get the error "Validation does not apply this time. Also I am not able to create a new virtual machine and use the existing hard drive hard file.

  The CPU, network and storage of data are the same.

  I can export the virtual machine to the virtual server Center 3.5 on the server for vSphere 4.0, but this requires rewriting the same data store, which is a huge waste of time when I'm remaining on the same data store. Can anyone suggest a procedure to follow for 3.5-4 VM? Thanks,-Jeff

  Your best approach would be to use VMware Converter.  Your problem is that you have vCenter 2.5, and who cannot manage the 4.0 host.

• Movement of data warehouses from the local storage to SAN virtual computer

  Hello

  I have a few VMs that must be moved on our SAN, they are on an ESX 3.5 stand-alone server.

  It seems that the best way to proceed would be to:

  1. turn off the VMs system.

  2. copy and paste all of their files on the SAN data store configuration.

  3. right click on the vmx files, add them to the ESX cluster.

  4. create a new ID when asked.

  5. turn on them and let it run.

  Am I missing tips here? In this way, I still have the original VMs back if something breaks down - they will have a new ID created and if all goes wrong, I can just stop them and the power on the 'old'.

  Any help/advice appreciated as (as always) here are important to keep servers to work correctly!

  rudybrewster wrote:

  Thnaks for the answers, I'll flat some points a bit.

  The reason why I want to do with a copy/paste is to keep the original files intact, if I vMotion them, I won't have the originals are I'm going?

  Stand alone ESX server is a different model, etc. to the cluster, so I don't think I can add in?

  Bascially, I need to be 100% sure that I can get these servers if something happens on copy - and I have thin, that my method is what?

  Yes, when you svMotion them, you can move them.

  You can add any model of a server to a cluster. What might not work is vMotion one guest from one host to another if the CPU do not match.

  If you want to keep the original files, copy them.

  AWo

• Need to access the advanced settings.

  I downloaded a program called Clownfish. Unpon opening Skype an allow / deny access screen appears. I would need to allow manually Skype to use this program but were unable to find advanced on the 8.1 settings app and have become very frustrated and irritated. Please help me.

  The latest version of standard desktop:

  http://www.Skype.com/en/download-Skype/Skype-for-Windows/downloading/