The use of hard disks > 2.2 to XP

Similar Questions

• Using the service 'Release hard disk': some pictures of stay in "Update the Photos to reissue", even if I publish it

  Hello

  First of all please excuse my bad English. [I am french :-)]

  I have 2 different problems with pictures in smart albums used in a service of "Publish on hard drive" [Publication of the Service of hard disk] :

  -some of them stay in the section "Updating the Photos to republish" ['Changed to republish photos'] even when I publish it. The published photo is created and saved on my hard drive, but the picture goes to the section "Published photos" [published Photos by] for a second and then go back to the section "update the Photos to republish. To move back then in 'Published Photo', I need to use the "mark as up to date" [mark as updated] option in the right click menu.

  d ' other hand, some ot them (maybe the same) are still stuck in the section 'photos Publised' even if I do some changes (adding keyword, change some options of development...).

  Can I have some help please?

  Fabien.

  I had the same problem and I found the solution here: Lightroom CC 2015, error Publishing Services

  -Terje

• Can Qosmio G50 - 11R - I use two hard disks?

  On the Qosmio G50 - 11R

  Anyone know if it is possible to install two hard drives in this laptop?

  As far as I know, you can only use one HARD disk in the Qosimo G50 - 11R.

  But you can check this, if you remove the second HARD drive cover (it's the only screw) and there may be a second HARD drive connector or not, so I think.

• Satellite A300-1ND - can I use SATA2 HARD disk?

  Hello.
  Is there a place to upgrade A300-1NDs SATA HDD hard drive SATA2? I know that SATA2 is faster and is backward compatible with SATA, but do not know if the laptop would be able to use the full speed of SATA2.

  THX all

  Hello

  As Akuma has already said the s normal HARD disk with 5400 or 7200 RPM are not due the old interface SATA1.
  The speed of your drive you can check yourself with HD Tune for example. I think that your HARD drive will not reach the 150 Mbps.  ;)

  The new SATA2 interface is compatible with SATA1 controllers, but it won't bring a performance gain.
  Only the new generation of SSD also called HARD disk s can use fast SATA2 interface but these drives are more expensive than normal HDD s.

  Good bye

• How to check the type of hard disk of the windows operating system?

  on linux, we can find the hdd for example of name setail

  Type a - ide

  SDA - ACHI or sata or sas

  a way to find the type of hard disk in the windows operating system? as linux

  any command or something

  In Windows 7, you can get a lot of details by selecting Start, all programs, accessories, System Tools, system information, components, storage disks. It was very similar to Windows XP, but for all information users tend to use Everest or Belarc Advisor for additional information not available. Everest has been best Bellarc advice but they ceased to offer tan updated free version. However, the 2.20 version is always available from third-party sites.
  http://www.Softpedia.com/get/system/system-info/Everest-Home-Edition.shtml

• Windows Boot Manager, I want to change the Configuration of hard disk

  I have a computer with two former 500 GB Hard Drives.  The "Legacy" operating system is installed on the first physical hard disk in the system and Windows 7 is installed on the second physical hard disk, they are the identical WD drives.  I bought a new Seagate Barracuda 1000 GB drive, I want to use in place of the mark.

  So currently I have:

  SATA-0, score 0: Legacy 500 GB OS

  SATA-5, score 0: 500 GB Windows 7

  With the new player, I want to:

  SATA-0, score 0: Legacy 500 GB OS

  SATA-0, Partition 1: 500 GB Windows 7

  I have disk imaging software, able to copy both disks to the new partitions on the new disk.  What I want to know is how can ensure me that I continue to get the start menu to see the two operating systems.

  Of course, I will still have the old hard disks available, and I can always put them in.  It's just that the cloning process takes a long time, and I would like to have my procedure in advance.  The first time I have start the system with the 1 TB drive, it will not be a disk of 500 Go SATA-5, score 0: in the computer.  I don't know which files must be modified to search for Windows 7 in the new location.

  I shouldn't need to do a reinstall of windows.  I think I found the answer to what I was looking elsewhere.

  I remember that two years ago, when I set up the Dual boot system, I followed these instructions:

  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  When I did, I had a dual boot menu:

  -Old Version of Windows

  -Windows 7 Professional

  Of course I meant "Windows XP" rather than "earlier Version of Windows.  I searched and found that a tool exists to modify this menu.  I don't remember what they called the tool when I presented this request.  I was pretty sure that the tool would allow me to have the change of start menu where he sought the installation of Windows7.

  Today, I found the name of the tool, it is called BCDEDIT. EXE.  It allows you to safely edit the menu file, and startup locations resemble the old file boot.ini of Windows NT days.  Here's what the tool then generates on the command line.

  Windows Boot Manager
  --------------------
  identifier {bootmgr}
  Device partition = D:
  Description Windows Boot Manager
  settings regional en-US
  inherit {globalsettings}
  default {current}
  RESUMEOBJECT {a68ca6ef-27a1-11e3-bc5b-844b6ef301be}
  displayorder {ntldr}
  {current}
  toolsdisplayorder {memdiag}
  timeout 8 / / used to be '30'

  Windows Legacy operating system loader
  ------------------------
  identifier {ntldr}
  Device partition = D:
  path \ntldr
  Description Windows XP / / used to be "Earlier Version of Windows"

  Windows boot loader
  -------------------
  identifier {current}
  Device partition = C:
  path \Windows\system32\winload.exe
  Description of Windows 7
  settings regional en-US
  inherit {bootloadersettings}
  recoverysequence {a68ca6f1-27a1-11e3-bc5b-844b6ef301be}
  recoveryenabled Yes
  OSDEVICE partition = C:
  SystemRoot \Windows
  RESUMEOBJECT {a68ca6ef-27a1-11e3-bc5b-844b6ef301be}
  NX OptIn

  I have foound good information about this tool on:

  http://www.nextofwindows.com/

• I have home premium Windows 7 with activation key. I replaced everything at the time of hard disk. I'm not able to activate Home premium Windows 7 please guide me

  I have home premium Windows 7 with activation key. I replaced everything at the time of hard disk. I am not able to install or upgrade Home premium Windows 7

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How to specify the file of virtual hard disk when you create a new virtual machine using virtual hard disk on the data store?

  I'm new to PowerCLI and find quite simple, but in the documentation I read, I don't see how to use a virtual hard drive, existing on a data store when you create a new virtual machine.

  Is this simple registration on the virtual hard disk, or did I miss something?

  My current create VM is the following statement:

  New-VM

  -Name $TargetHostName -host $TargetVMCenterHost -data store $TargetVMCenterDatastore DiskMB - 20000 -MemoryMB $TargetHostMemoryMB -NumCPU $TargetHostCPUs -ID $TargetHostOS -CD -Description $TargetHostName

  Didn't notice this before, but I think that vSphere will use a backslash instead of a slash in the paths.

• Tecra S1: It is possible to upgrade the 80 GB HARD disk

  It is possible to upgrade the hard drive on my Tecra S1 on a 80 GB HDD +. If Yes, what is the maximum size and can recommend a disk.

  I found some info, and it seems that you can only use a 30/40 and 60 GB HARD drive.
  I guess that the 80 GB HARD drive will not be recognized by the BIOS correctly.

• Satellite A300-247 cannot find the folder of HARD disk recovery

  Hello
  I tried to reinstall my Vista home premium on my Satellite A300-247. I have buit - in the OS. I did it axactly according to manual (reboot - F8 - repair your computer-...) When I clicked on Toshiba HDD recovery system recovery tools wrote me this:

  "the recovery of the operating system is impossible
  File recovery HARD drive on the second disc of the first hard drive not found.
  There is no environment recovery valid HARD drive on this computer. "

  I would like to ask what do I do reistall my OS. I have no disk with OS and backup disc creation tool does not work.
  Y at - it an option to get my OS on DVD from Microsoft or Toshiba?
  If I use this tool to reinstall the OS, I will loss all the information on the D drive (Vista is on the C drive)

  Thanks for the reply

  Hello

  Seems that drive HARD recovery does not work.
  Perhaps something has changed on the recovery of HARD drive partition or recovery files has been deleted

  Usually it s always advisable to create a recovery disk in a first time. This should be done at the beginning and this recovery disk is always useful if something would go wrong with drive recovery HARD or with HARD drive

  Now, you can't get the phone because you don t have this drive and the HARD drive does not work

  What to do?
  Well, I think that you would need new control disc.
  You can do so here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Satellite A300 - how to use two hard disks?

  My Satellite A300 came with two 200 GB hard drives (drives C and D). What is the best way to use the D drive? Now I have nothing about it. If drive C fills the computer automatically switches the D drive?

  A basic question, I know, but the manual provides no information on this subject.

  Hey Dearborn,

  > If drive C fills the computer automatically switches the D drive?
  No, D: drive will not be filled automatically.
  When installing the program, you will be asked which drive they will be installed. So you can choose between C: and D: drive.

  In general there are no rules the use of two hard disks. You can do what you want.
  In my opinion the best is if you install all the programs on C: drive (first HARD drive) and save your private files such as photos, videos, documents, etc. on drive D: (second HARD drive). Its advantage is that if you need to reinstall Windows at all times, these files on the second HARD drive will not be deleted. ;)

• Start of the external (USB) HARD disk Windows

  Dear apple supports,

  I have install Windows 10 external HARD disk and connect with my Mac by USB. When I select the system startup on boot disk is windows 10. I got a message "you cannot change the diskette on the selected disk. The bless tool was unable to put the current startup disk. »

  How can I start windows from disk external HARD on my Mac (MacBook Pro (retina, 13-inch, early 2015), OS X EL Capitan v10.11.1)

  There are two ways to install Windows on your MacBook Pro. You can use the Boot Camp Assistant, located here details: http://www.apple.com/support/bootcamp/ or you can use a virtual machine, Parallels, Fusion or VirtualBox. Details are found on their respective sites.

• To move the library continues to be the library system hard disk

  Hello everyone,

  I would like someone to help me with this question. I've migrated the pictures opening. My library as subject of 70,000 photos.

  Everything went well. I imported the photos keeping referenced masters to na DHM (external hard drive). But, as I wanted to access all my library in the devices of ohters (Iphone and Ipad) that I bought the 1 TB Icloud.

  I noticed that I had 2 thousand pictures consolidated and referenced 68,000.  Then only 2,000 photos are ok to download.

  And there is the first question. It takes too long to download and photos do not appear on devices! Is this normal?

  Here's what I thought:

  I move my library to an another DHM (os Journeling) and consolidate all the photos. Then I will download them all to the ICLOUD. And this way, I'll have all the pictures in all devices.

  But my concern is the following.

  I tried this.

  I copied the actual library to na DHM and deleted in the MBP and open PICTURES. I expected that PHOTOS recognized the library the library even only in a different location. BUT ISN'T. Photos 'think of it as a new library and not the photo of system library.

  Is it possible to move the library and continuing to be photography libray system?

  Help me please.

  Thanks in advance

  Antunes Duarte (greetings from Portugal)

  Is it possible to move the library and continuing to be photography libray system?

  You can set the photo library of the system in Photos > Preferences.

  Double click on the library on your external drive to open pictures. When the Photos is running, open the Photos > Preferences > General.

  Click on the button 'Use as Photo Library system'.

  

  If this button is gray, fine - the library is already the photo library of the system and you can activate iCloud photo library for her.

  If you want to use the library with iCloud, the disk must be formatted correctly.  You can use a hard drive with iCloud photo library, if the file system is Mac OS extended (journaled).

• How to change the application installed HARD disk?

  My PC following setting:

  C: is for Window XP OS

  D: is installed application

  because the disc is not enough space and need to buy a new SATA III HARD disk after formatting under drive Z:

  I copy everything in D: z: readers and I would exchange the disks for the following parameter:

  D: old drive will become Z: drive for backup

  Z: old disk will become D: drive for installed application, because many applications and installed adjustment use the D: drive for application, so I'd like to preserve the D: drive for application, but I get no idea on how to swap the disks.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  This article describes how to change the drive letters on drives:

  "How to change drive letter assignments in Windows XP"
    <>http://support.Microsoft.com/kb/307844 >

  HTH,
  JW

• When you use your hard disk defragmentation process starts but seems stuck and won't end evn after several hours. How I can remidy this?

  When you use "Defragment your hard drive" the process starts but seems stuck and won't end evn after several hours.  How I can remidy this? I was already able to defragment successfully.

  Hello

  How do you know that never, it ends when there is no GUI on Vista for Defrag?

  in vista, the defragmentation process works silently in the background

  Unfortunately in vista it does not provide a GUI to show progress as it did in xp

  to do this, you'll need 3rd party defrag programs

  read the comments on these FREE below defragmentation programs and choose the one that you prefer to use

  http://www.SnapFiles.com/get/adiskdefrag.html

  Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

  http://www.SnapFiles.com/get/UltraDefrag.html

  UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option

  http://www.SnapFiles.com/get/puranfree.html

  Puran Defrag is a Disk Defragmenter easy to use which offers start defragmentation, automatic defragmentation, intelligent directory optimization, background (low priority) operation and optimization of free space. Other features include integrated planning, automatic reboot or shutdown after defragmentation and integration with Windows Explorer to defragment individual files from the context menu. The free version is identical in functionality to the standard version (shareware), but it is limited to a private, non commercial use

  http://www.SnapFiles.com/get/iobitsmartdefrag.html

  Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.