The use of storage

Similar Questions

• Is there a way to recover the use of storage for a specific org through the vCloud API RESTful vdc?

  
  Hello - I hope someone can tell me how to recover the amount of storage used against an assignment given to a specific VCC in the goal.  I use storage profiles in my environment and when I retrieve the details of an org vDC by AGAINST... api / / admin/vdc / < OID >, I think the result is a block with hrefs VdcstorageProfiles I can do more gets against for details on provisioned storage profiles.  However the results of these becomes later contain just a 'Limit' tag in the XML file that indicates the amount of the allowance, but still no details on usage.  The initial GET against the vDC shows its use against the allocation of memory and cpu, and I was looking to find a similar result for storage.

  Thank you!

  Nevermind, I just have this one resolved, everything necessary for the query / api /? type = adminOrgVdcStorageProfile & filter = vdcName is XXXX

• The use of storage local sata on Dell Optiplex 745

  I'm making Esxi update 3 using my local storage to store the VM images. I have esxi installation using boot usb according to the thread below:

  http://communities.VMware.com/message/1138818

  When I log in VI CLient, storage adapters, it shows the 2 port SATA IDE Controller (ICH8) with vmhba1 and vmhba33. But when I try to add a data store, it gives an empty list.

  In my BIOS, I put SATA to legacy and active chip virtualization, the player has a fat 32 partition. I copied the new oem.tgz in Hypervisor1.

  fdisk-l and esxcfg-vmhbadevs only list vmhba32 device which is my USB.

  I tried to find info on both devices in/proc/scsi/ata_piix and for both entries contain the following message:

  The driver does not yet support the proc fs
  vmkadapter:vmhba1

  Since then he has worked for some else with the same exact system, so it should work for me as well. What should I try next?

  I would try it with SATA Native mode.  In addition, make sure that you do not have built-in capabilities "RAID" activated - the Optiplex 745 has of an embedded controller "fake RAID", and those who do NOT work with ESX/ESXi.

  In addition, how are you on the attempt to add a data store?  You should go to Configuration-> storage and then adding using disk/LUN in the wizard.

• How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file.

  How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file. This means that the file is still in the iCloud and available to be downloaded to any device.

  In practice, I want to be able to scan and download through my documents located in my iCloud and once I didn't need them on my iOS device I would like 'load their return to the cloud' to my storage of the iOS device is not used.

  Thank you in advance to the community!

  Max

  The only way I found to do that once a file has been downloaded is to remove it and add it again through either from Finder on Mac or iCloud.com.

• What is the best way to manage the use of the XP processor and backup storage?

  I have a three year old computer, I use a lot of disk space and burn the DVD for backup storage. I am a heavy user of CPU too. How do you recommend that I improve it? Thank you

  * original title - my Windows XP storage... *.

  Hmmmmmm!

  "I use a lot of disk space" - remove all the files that you do not need, does not store things that you don't use often. Delete unwanted files, i.e. run diskcleanup for example.

  "burn the DVD for storage of backup" - If you have USB2 then consider getting an external USB2 hard drive. Its easy to set up as and when necessary and is easy to copy/backup information to.

  Indeed, consider laying a HD internal or (easier) a USB2 external hard drive for storage from day to day, not just a backup.

  "I am a heavy user of CPU too" - its sometimes possible to upgrade your processor one installed initially, but it will depend on your type/brand/model of PC. Sometimes possible, sometimes it isn't. But it is usually at best a stop gap.

  If you have any free ram slots, additional ram stick in (get the right type for your PC) that can help speed up actions for certain tasks. If you play games and you have a "graphics card", level it as well.

  Best of all, is to consider a replacement PC. If you are really short on HD and have a very slow motherboard or CPU, long term on a new PC is probably going to be the best.

  Not sure if this is the type of information you were after? If it is not coming back.

• Selection of the mSATA port w / 120GB SSD and HDD using Rapid Storage Technology

  For my XPS 8500, I try to understand how to better select the appropriate for my two readers ports: 1.standalone120GB SSD drive and player 2.a 1 TB HHD mSATA of w / 120GB SSD using Intel Rapid Storage Technology.  The standalone SSD should be on port 0 (SATA III) and put on port 1 HARD drive (SATA II), or would the using HHD Rapid Storage Technology better put on port 0, and put the standalone SSD on port 1?  Which of the two configurations of ports will get the best performance for startup, application loading and general use (no game)?  I intend to use the standalone SSD as boot drive and application drive while using the HHD to store data (especially the collection large photo).  As I understand it, the choice becomes one which the reader will work better (suffer the least) on the SATA II port.  I read that HARD drive using Rapid Storage Technology technology perform almost as although independent of SSD, but I do not know if the SATA II port speed limit either or both players so that no matter what port is selected (i.e. HARD drive using RST on port 0 would work as well as standalone SSD on port 1)?

  Thoughts or suggestions would be most appreciated.

  Hi DoctorDED,

  The mSATA SSD is usually used as a cache for a mechanical drive. With a 120 GB SSD as drive system, you do not have the reader mSATA as a cache, but I believe you can still use it for storage.

  You must install the SSD on port 0 and mechanical training on port 1.

• What is the use of the "Local storage folder" creating application in customer interface (HFM)?

  Hai! All the

  Can you please help me to know the use of "Local storage folder" in the HFM client.

  Difference between the two to create the application in web and client user interface.

  Hello. The local storage folder is used as a default for the client windows to search for the file location. The windows client used to do a lot more that he made here at the RSA was more important, but now (for many years, in fact) there's really no need to do something special.

  Eric

• Cannot control the use of database storage

  Hello

  I've just updated the vCenter Server from 5.5U1 to 5.5U2b. In 'Health Service', there are new warning message:

  "Cannot control the use of database storage. See VMware KB 2078305 for more details".

  I use MS SQL 2008 R2 SP1 Express, which is supported by this version of vCenter. There are also a lot of free space on the disk of the server (63 GB free). Ko 2078305 does not explain this particular warning message and the data of events for task and retention policy are also defined.

  So, what should be the problem? What are the conditions to trigger this alert?

  Thank you

  David

  Thank you so much Jogits you are right, I used google and find the solution on the blog below

  I put in sql db permission:

  use master

  go

  grant VIEW SERVER STATE to [vpxuser]

  go

  GRANT VIEW ANY DEFINITION to [vpxuser]

  go

  and after

  Restart the Vcenter, and is now GREEN

  Setting the server vCenter 5.5 & #8217; database question s followed by its use in the health service. Salt * wet * bytes

• My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is installed and running on the SSD, with my old drive system currently used for storage a

  My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable.  The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop.  Can you tell me the best way to do it?  -Thank you

  If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• What plans are available for the use of the storage cloud at adobe. What is the authorized space if I free plan.

  What plans are available for the use of the storage cloud at adobe. What is the authorized space if I free plan.

  Thank you

  Agoutin

  Hi rajthkr,

  Acrobat.com offers free online storage for up to 5 GB of data (there are on the plans at this time to provide additional storage for a fee).

  Best,

  Sara

• Satellite Pro L670 Windows using MORE storage than the MAX I put pictures!

  I have a strange problem, at least it seems strange to me!

  After problems with my last laptop under Vista where space excessive was used by phantom memory, I immediately checked the set up on my new Pro L670 of Satellite running Win 7 64 bit. Pleasantly it was set by default at a MAX 10 GB setting that was very much like the HD 500 gb, however a few days later I found that a few GB of space went so checked again at the vssadmin to find he was using 12 GB even if max was still 10 GB!

  I ran a command to resize to the size to 10 GB max, which immediately reduced the used space up to about 8 GB, but a few days later he was back to 12 GB!

  How can this happen?

  Today, I checked in "System Protection" of the control panel that has been repoorting that only 4.5 GB used even if vssadmin list shadowstorage reported 12 GB! I have reduced the MAX space by using the slider in "System of Protection" to 6,99 GB and see if Windows supports any notice this time.

  Does anyone have a similar experience?

  Post edited by: scoobasteve

  Hey Buddy,

  Why is it a problem that 12 GB will be used for the protection of the system on 500 GB HARD drive?

• Boot Camp Windows 10 incorrect use of storage

  Hello

  I have a 2015 end MacBook Pro with 500g of ssd. I have 10 windows entirely running and allocated approximately 250 g for it. But when I go to the use of the storage in the settings, it shows that my C: drive is 698g. I also checked command prompt and records management, but it seems that everything is normal.  In addition, I also fixed the disc as well in mac and Windows operating system recovery mode, but it didn't work.

  Recently, I used camptune to increase the size of the partition boot camp in 100g, and I strongly suspect that this could be the problem, but I have not found a solution.

  Thank you

  Can you post the output of

  diskutil list

  Cs diskutil list

  and

  Windows Disk Manager.

  You may need chkdsk on the Windows side.

• I need 280 MB of storage on my iPhone. How can I increase the volume of storage of the iPhone?

  I need 280 MB of storage on my iPhone. The capacity is full. How can I increase the capacity of the phone?

  You cannot increase the capacity. You must remove things. Go to settings > general > storage & use iCloud > storage > storage management and see what about space.

• What is the limit of storage to the notes stored in iCloud?

  I have been using the Notes app for a while and have been loving him. Since any cloud storage service usually has a limit of free storage (Google Drive has a limit of 15 GB), I would like to know the limit of storage for the Notes saved in iCloud.

  Your iCloud free storage is 5 GB - for all the iCloud services you use handsets, Mail, documents, notes, iCloud, photo library,...  The free GB are not counted by app but by AppleID.

  Only the photo My Photo Stream and shared albums do not count against the 5 GB free, there are different limits. (iCloud: My Photo Stream and iCloud Photo Sharing limit)

  In addition, calendar entries, bookmarks, stay, contact:

  See this list: iCloud: limits for Contacts, calendars, reminders and bookmarks - Apple Support

• The document _ is on a volume that does not support the permanent version storage.  You will not be able to access older versions of this document once you close.

  I recently started getting this strange message, usually when a Pages document is closed:

  «The document _ is on a volume that does not support the permanent version storage.»  You can access older versions of this document once you close. »

  All my research (apple.com and on the internet) have not enabled all the information on this message.

  Hi Larry,

  The 'volume' is a hard disk, a partition on a hard drive or a storage as a USB device.

  OS X automatically saves your document frequent while you work on it. If the volume of the device / it records on a summer formatted to allow 'versioning', you will be able to use Time Machine to open previous versions of your document. If it has not been formatted like that, you get the message see you, and only the current version of the document will be saved.

  Kind regards

  Barry