The use of VixMntApi to create files
I'm interested in how / if I can create files in remote virtual disks using the VixMntApi? I am able to do with the virtual machine turned off, but when the virtual machine is turned on I get a file by user error when you open the VMDK files.
On page 50 of the «Virtual DiskAPI programming Guild...» 1.1 ", she says"If you can not open the basic read/write disk, create a child.
drive to the front and open it as read-write. »
The first question I have is this referring to disks premises/hosted, disk / managed remotely or both?
Second, assuming that it can be applied to remote disk management, what is the best way to create the disc of the child? I can't use the last VixDiskLib_CreateChild because the documentation says that it applies only to the hosted disc. I don't see the tasks in the VIM that seem relevant.
I assume here a VCB environment with shared storage.
TIA,
Rick
If you use VixMntapi to remove a snapshot engine, it would work - of course, you should be aware that you are writing, beyond the control of the guest OS, it's like taking the disk and insert it into another machine.
So, write down some complications:
If there is no storage / system in the comments files filter drivers, they will not be aware of these changes - so they can react to such changes (VSS, backup etc. software.). Another example, it is no longer A / V protection for these "off-line" Scripture or at least protection is different from that provided by the guest operating system.
If NTFS versions do not match, some versions of Windows will try to upgrade the new volume NTFS. This may or may not be what you want - even can apply to other file systems.
-Remy
Tags: VMware
Similar Questions
-
Hi all
What is the difference between the use of a backup Favorites file ".json" and a file of bookmarks ".html"? It seems that both of them do the same job. If this is the case, then why there are two options (.json and .html) to do the same job? If this isn't the case, then what is the reason for the availability of the two options and how are they different? Although I read the material, it didn't quite clear form me again. Please be so kind enough to elaborate on the question so that I can get a clear understanding of their good use (s).
Thank you very much in advance for your time and skillsHello
See questions/684284
-
Hi all
I'm building a site but I use external CSS and JS files FROother m host, but now I want to using files locally, how can I download the files CSS and JS on Sites Webcenter? and how I call that my model JS and CSS files?, or I have to download the files use UCM?
Best regards!
Hi Villamarin,
You can place the files in the /cs/ to your web application server forlder creating the usual img, js and css files, or you can also do it under your http server. AAU tools as TDSB Webcenter sites are not necessary to import static files are placed manually using ftp servers.
After that, reference them in your template as normally:
Kind regards
Enrique
-
The use of eventhandler to create on trusted reconcile
Hey guys,.
I try to use an event handler to create the user an event recon trust.
So, I wrote a post process event handler and personalized to my BulkEventResult method. the structure is as below
public BulkEventResult run (long processId, long eventId,
{BulkOrchestration bulkOrchestration)
HashMap < String, Serializable > [] bulkParams = bulkOrchestration
. getBulkParameters();
for (int i = 0; i < bulkParams.length; i ++) {}
Code update bulkParams [i] using bulkParams.put (field, value);
}
return new BulkEventResult();
}
When I print mybulkParams, it shows all my updates. But when the task is complete, it will not refresh changes. The user is created but only with the values that were pulled out of the resource, but not the changes that I made to bulkParams [i].
I saw the other posts and I think I'm doing the same thing mentioned in other posts, however, my changes get through. Am I missing something?
Thanks in advance for any helpIn the bulkEvent, you can use the following code to get the user being modified as well as the type of event:
>
String operation = .trim m:System.NET.SocketAddress.ToString () () () bulkOrchestration.getOperation;
String [] entityIds = bulkOrchestration.getTarget () .getAllEntityId ();
>Then later, as you have completed your entries, entityIds [ii] will give you the entityId which you can spend like the take.
When I do updates in the majority, I store all the values that I intend to update as follows:
>
Vector of values -
The use of dbms_passthrough to create a view of the
Gurus,
Can I create a view in oracle to access data frm a MysqlDB using dbms_passthrough. I created a procedure to get the data from the remote system to oracle db using dbms_passthrough but I was wondering if this can be done by using a view
Published by: user10600431 on January 22, 2009 04:39
Published by: user10600431 on January 22, 2009 05:52user10600431 wrote:
Yes but I have as many functions and views on top of these tables, unless the function can be dynamic to fetch the result according to the charts.You can create a function with the SQL statement, or just the name of table MySql as a parameter. However, you will need to create 50 views. Something like:
CREATE OR REPLACE VIEW view-N-name AS SELECT list-of-attributes FROM TABLE(function_name('select-from-mysql-tableN')) /
SY.
-
Hello
Please forgive me if this has been discussed in this forum already. If so, please point me to this discussion.
What I'm trying to do, it's a data merge InDesign with a (CSV) file delimited by commas. I created the CSV file by using the command "SaveAs CSV" with Office Excel 2013. The problem I have is with records that contain multiple lines in the same area. After reviewing the merged InDesign document, I noticed that the results are inaccurate for the rest of this record. When it gets to the record following some fields are filled with the remaining records of the previous record.
I'm sorry if I'm not explaining this very well, but the results are strange and I hope others have similar results and can offer a solution.
Thank you
Greg
You can't have line breaks in a cell. The solution is to use a code for the break, and then run find/replace after the merger to change the code to break you.
-
After run Trojan Killer to clean up my computer after infection the installation "captured files" did not restore my system properly, namely files connected to the bar of tasks IE icons missing also no staus bar
Hello
Method 1:
I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.Method 2: Run SFC scan.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: Run system restore by keeping the computer in the boot.
Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting steps, follow step 7 link to return the computer to a Normal startup mode -
We have created services windows (log events in the event viewer) using VS6.0 and noticed that they were not reliable running on Windows 7 (and beyond). They stopped unexpectedly after startup and so on.
We have VS2005, 2010 for the development of Qt and never looked in services portage. We have to bought VS2015 and found that C++ Windows Service models have not been provided for VS 2010. We have inherited code which must remain C++ (c# conversion is not an option for us). Someone out there who has created a Service from Windows C++ for recent versions of OS? It installs with InstallUtil.exe as the most recent services c#?
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
The use of JNDI to create cnames in LDAP
Hi all
First of all, thank you for taking the time to read my post. As I am new to JNDI, I have a question about its integration with LDAP.
I'm writing a Java program that will add CNAME records to my LDAP container. I had some success because the cname is created, however the objectClass attribute is initialized badly and I struggle to change. Here is the code I have now with the attributes that are initialized:
DirContext ctx = new InitialDirContext(env);
ctx.createSubcontext("cn=test,ou=orgUnit,o=org");Attributes:
CN = test
= javaContainer objectClass
objectClass = Top
The correct attributes that I need the cname initialized with are as follows:
Attributes:
CN = test
= groupOfNames objectClass
objectClass = Top
ACL =...
DirXML-Associations =...
I had no problem adding the ACL and DirXML-Associationg attributes. However, I tried replacing the attribute objectClass existing with a command 'replace' using modifyAttributes without success. Does anyone have any ideas?
Thank you!Josh
Of course I tell me right once I confirmed the issue. For those who may encounter this problem in the future, here is my code:
DirContext ctx = new InitialDirContext (env);
Uploading attributes = new BasicAttributes (true);
Cname attribute = new BasicAttribute ("objectclass");
CNAME. Add ("Top");
CNAME. Add ("groupOfNames");
attrs.put (CNAME);
Result of context = ctx.createSubcontext ("cn = test, ou = orgUnit, o = org", uploading);
-
Effects mask ok in the preview but ignored when creating file
APE10: I applied a black and white mask to a part of the image. It works fine in the preview, but when I generate ("action"), as a .mpg file, the effect is ignored.
MPEGs are, unfortunately, a format that sometimes things do not place correctly on.
Try this: your video using computer/sharing/AVI with the wide output DV preset.
Open a new project, making sure to use the project settings for DV Wide. Add this new AVI to your timeline.
Your mask effect should then work correctly and your output should be perfect.
-
The use of view to create a list of values?
Hi, I try to use the view to create LOV, but I do not know name of the Table/view drop-down list, how do I find the list of reviews?
Thanks in advance,
KarmanKarman,
You can type directly, on behalf of the view instead of going through the search list. If you do not know the name of the view, you can open the SQL workshop in a new window or tab.
-David
-
The use of ResourceTemplates to create AnyCharts XML fails...
I created a resource model called "getChartData".
The GET (Media Resource Type) is defined as:
Select ' text/x-apex-html", xmlquery (content of return of f_getchartdata)
of the double
(getchartdata is a procedure spitting XML). If I run this from directly from the browser, it returns the XML structure.
(Also when I can replace this just query Select ' text/x-apex-html ', double f_getchartdata it works well).
Now, I want this output to the input of a chart by AnyChart. So I replace in the Source region of the map
"XMLFile = #HOST #apex_util.flash? p = & APP_ID.: & FLOW_PAGE_ID.: & APP_SESSION.:FLOW_FLASH_CHART5_R #REGION_ID #
with
XMLFile = http://localhost:7777/apex/getChartData (which should see the ResourceTemplate)
but alas, that doesn't seem to work.
Because I'm not sure if XMLCallDate is added as a parameter, I created another model with this setting: getChartData? XMLCallDate = {model}
All ideas, clues? Or is it--for one reason or another - never go to work?
(Because it is linked to the listener of the APEX and APEX itself I'll cross post - and do a cross-reference, so no matter where you post your answer, as long as you do ;-)))
APEX listener Forum thread: http://forums.oracle.com/forums/thread.jspa?messageID=9418611
TIA
Roel
Published by: Roel March 7, 2011 14:13Hi Roel,
It is true that AnyChart could add other parameters to the call.
In your case, XMLCallDate is a parameter AnyChart uses to make the unique calls so that they don't is cached by the browser.Just for your reference; If you look at htmldb_util.flash which has the possible settings too.
You are running and APEX of the listener itself? If not, try that in the charts in APEX do not work like default cross domain.
If you look in firebug demand which is send and the answer you get back, you should know a little more.
Hope that helps,
Dimitri
-http://dgielis.blogspot.com
-http://apex-evangelists.com -
Weird reading during the use of Stream.play ("mp3:file")
Hello!
I am trying to set up a selection side server for playback of mp3 files, if I fall into a weird behavior of the FMS.
I use the last FMS 4.0.2
Here's how I try to publish the stream (ActionScript on the server side):
var s = Stream.get ("boo");
If (s) {s.play ("mp3:rhcp", 0) ;}}
Client side, I try to play using NetStream.play ("boo"). However, the sound quality that I get is really weird. The sound goes slower and faster and stops for a split second. He can play properly for a few seconds, but that's all. Sounds like a problem of decoder for me, or a bitrate conversion problem.
When I play the stream with NetStream.play ("mp3:rhcp"), the reading goes well.
I tried several MP3s with different flow rates, but they all have the same problem.
It looks like a bug to me, so I'm expecting Adobe to comment on this one.
Hello
Please try the FMS 4.0.2
It is a little strange to see the problem, but I would like to know your settings on the client side. What player flash you use (although I doubt that it is a question that your reading of the original file is ok), and what is the length of the buffer that you used? There are known issues with the length of the buffer to 0. Can you try and change the length of the buffer in some other values and see if that helped to get the best quality?
Thank you!
-
The use IS or as creating?
Hi all
I'm new to stored procedures, please bare with me, even if the question is a dump, a.
My question is "inside the procedure sometimes I see code using IS and sometimes DID. Please tell me which is correct?
The approach IS:
* create or replace PROCEDURE update_count_proc (p_txn_id IN varchar2, p_file_name OUT VARCHAR2). *
* IS *.
* v_file_name varchar (500); *
Approach:
* create or replace PROCEDURE update_count_proc (p_txn_id IN varchar2, p_file_name OUT VARCHAR2). *
* ACE *.
* v_file_name varchar (500); *
Thanks in advnace.they are both correct, but some people (like me) tend to use what seems correct in English. for example
... do an action AS follows...
... this object IS defined as...In terms of oracle, who would be... for example
(stored - procedure create is the action)
CREATE OR REPLACE PROCEDURE xxx AS
(procedure inside the package - defined, untreated)
PROCEDURE xxx IS
-
The use of div to create columns
Hello
I created (or attempt) to create a page with three colum with the div tag It seems OK except when I add content (or delete) to the div in right and left it mesess upward.
Here is the link to the page
http://www.dealfindit.com/productadpc.php?ProductID=211959635
As soon as there is no content in the right Division moves the Center div. What is the best way to create a correct page of three columns with div I can't use the table that I use for the content div. Center repeat region
Here is the code:
css code ========= #headlines{ float: left; width: 15%; border-right: 1px solid #cccccc; border-bottom: 1px solid #cccccc; } #headlines2{ float: right; width: 15%; border-left: 1px solid #cccccc; border-bottom: 1px solid #cccccc; } #headlines{ margin: 0px; padding: 2px 0px 2px 2px; /*font-size: 80%;*/ } #headlines2{ margin: 0px; padding: 2px 2px 2px 0px; /*font-size: 80%;*/ }
First and foremost -.
Styles of club with the same ID together as follows:
#headlines{ float: left; width: 15%; border-right: 1px solid #cccccc; border-bottom: 1px solid #cccccc;
margin: 0px; padding: 2px 0px 2px 2px; /*font-size: 80%;*/
}#headlines2{ float: right; width: 15%; border-left: 1px solid #cccccc; border-bottom: 1px solid #cccccc;
margin: 0px; padding: 2px 2px 2px 0px; /*font-size: 80%;*/
}
then add a style for your average main content div too... something like:
#mainContent {}
Width: 68%;
margin-left: 16%;
margin-right: 16%;
}Since each div left and right is 15%, I added 1% on either side to give some space (16%) and the width of 68% mainContent DIV (with additional 1% margins and padding already defined and all you may need to cut a little more... say 67 or 66%).
and in html, you can have:
Left content side comes heremain central section comes hereSo, even if it stretches not no content in the left and right divs, the central section and should in place.
Kind regards
Vinay
Maybe you are looking for
-
Win2K NAT would be from 1650 to a PIX 515 - does not
Hello : I have a working VPN config on my 515 (6.2.2) and can tunnel from one host with a valid external IP without any problem. But, with a NAT would be customer, nothing seems to work. I use RADIUS to authenticate after using a password for the gro
-
Custom not pulling field TrackwheelClick
Hey all,. I have a custom field that extends to the field. I want to know when we click on the control, so I outweigh the trackwheelClick method. However, when I use the debugger, the trackwheelClick method is never triggered. What Miss me? Thank y
-
Can I switch from a German Win 7 Home to win 7 Prof?
I bought my laptop in Austria and the bone House of win 7 is in German. At Christmas, I got a Win 7 Professional English upgrade DVD. Before diving and upgrade I wanted to see if this is possible without any problems. Thanks for any help.
-
Search in the start menu displays old emails from my Hotmail account. I find it tiresome and very secure as anyone who uses my computer can read my emails. I guess my computer is somehow related to my Windows Live account. I did a search for these e
-
Block based on the stored procedure cannot modify Default_where clause
Hi allI tried to create a block based on the stored procedure that it works very well with the result set for the refcursor. But if I need to add filters on the block using where clause in the palette of goods orusing the property block set in where