After the use of trojan killer mycaptures files did not restore completely mainly the icons in the task bar and the status bar/windows vista
After run Trojan Killer to clean up my computer after infection the installation "captured files" did not restore my system properly, namely files connected to the bar of tasks IE icons missing also no staus bar
Hello
Method 1:
I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.
Method 2: Run SFC scan.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
http://support.Microsoft.com/kb/929135
Tags: Windows
Similar Questions
-
Original title: after the new installation of windows Vista it does not work.
After the new installation of windows Vista on my laptop Lenovo at startup, it displays "windows/System / *" file could not be found... I also tried to fix.
Hello
Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site
go to their website and look for a driver and software download section
Enter your model number for the last look drivers vista then download and install
If you continue to have problems with it contact lenovo
-
Hey, I'm Ryan.
I am running windows vista 32 bit and I get 2 files corrupted when I run SFC - they relate to the windows sidebar (sidebar.ini and store source file is also corrupted). I did a repair installation, and this always happens when I run the SFC.1 - is this going to cause any problems to my laptop if I leave it alone?2 could it be related to a virus?I'm sorry for the questions, but I'm confused as to how this happened... Any help would be appreciated.Thank you very much.1 NO.
2 NO.
This SFC message could be caused by the manufacturer of the computer adding gadgets to the sidebar before installation of Windows for you, or some other change to the sidebar gadgets
http://www.vistax64.com/general-discussion/219350-sfc-cannot-repair-sidebar-ini-hash-error.html.
-
Computer will not start after the installation of Windows Vista SP2
After downloding and installing Windows Vista SP2 on ACER laptop for my daughter, I can no longer start the computer. Initially registered startup C:\\Windows\System32\drivers\ecache.sys as corrupt file repair. Change BIOS to boot first from the optical drive and the departure of computer with Vista DVD in the drive, I accepted the option repair. No chance that the machine always fails to start and always displays the window "Statup repair." Auto repair is always unsuccessful. Repair suggestions will be appreciated. Thank you. Bob G.Support Microsoft still offers a FREE support for Vista SP2. Go to: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1 where they will help you.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Blur and expanded text and icons after the connection with Windows vista
I have windows vista and when I turn on the laptop, the text and icons on the Welcome screen are normal, but after registration on the text and icons become slightly enlarged and fuzzy. How can I get it back to normal?
Hello
There are a number of things to try:
try going to your graphic card manufacturers site or computer and are looking for the driver download section
Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista
then try to make the screen of solution of problems
http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution
Change the screen resolution
__________________________________________________________
or try a restore of the system before this happened
http://www.windowsvistauserguide.com/system_restore.htm
If necessary do in safe mode
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
-
After the release of windows vista service Pack 2 and flash 10 my system continues to blue screen
After the last update of windows vista service Pack 2 and flash 10 that my system continues to blue screen, the solution has advised windows that will fix it is to uninstall flash and reinstal, it dosent solution work any ideas? I tried to roll back to Flash 9 and it's less, but happens again... someone has any ideas?
First, uninstall Flash to make sure that's not the problem. If the problem persists and if the problem is related to the installation of Vista SP2 (as seems to be the case), then Support Microsoft offers free technical support for installation of Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1&sd=gn. They are experts on these issues and you should take advantage of the offer, although it is still free. I'm sure they will be able to help you. Minimize (but do not deny) the update of Flash and to focus on the installation of SP2 when you explain the problem.
I hope this helps. If this isn't the case, after return and we'll see what we can do.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I searched this forum and almost all resources on the net for days now nothing works. Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.
Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).
My system:
Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0
* My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.
Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue. I stress that I have not had any problems with this device before downloads. I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.
I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities. The problem is obviously the need for an updated driver. I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).
I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work. They won't recognise BT devices. I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.
http://www.Broadcom.com/support/Bluetooth/update.php
I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion. Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers. I guess that's what they are charged to do, they do not have to admit a problem of compatibility. This obviously the same link they would charge $60 to send. I explained that I need just a Bluetooth Driver from Dell to at least version 6.3. Needless to say, I will never buy another Dell product.
On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer). This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided. Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.
Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.
Thank you for your help.
Support FREE from Microsoft for SP2:
https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.
Microsoft free support for Vista SP2 at the link above.
See you soon.
Mick Murphy - Microsoft partner
-
Dell Vostro 1510 Audio has stopped working after the update of Windows Vista.
Nice day!
My computer (vostro 1510) began to revolt recently and I wonder if you could help me with this.
Basically, last week I was talking to my friend on Skype when suddenly my computer restarted due to the update of Windows (I have Windows Vista Business 32-bit). After he turned his back, I realized that there is no audio from the speakers. I tried using headphones but still - no sound.
Immediately, I went to the 'Sounds' menu and checked if my speakers were still 'active '. They have been.
Next thing I decided to do was to reinstall the Realtek audio driver, however, did not help or the other. Since then, I tried to reinstall several times but, unfortunately, everything remained the same.Then, I thought that maybe something was wrong with my hardware, however, audio spent ALL Dell diagnostics audio tests (so my hardware is very good, yes?). I also tried "System Restore" option and returned to the point before the update... Nothing has changed!
In addition, as far as I know, all the audio settings in Windows (checked in Registry Editor) are OK.
What should I do now? My last hope is to completely reinstall the system, however, I decided to contact you first.
Thanks in advance!
Solved the problem by reinstalling the operating system.
Thank you!
-
After the recent update Windows Vista (Japanese OS) Firewall/Malware WARNING
Hi, I am faced with a new type of problem since the recent update of Windows. In fact I've been using computer for a long time and on computer there's always Norton Internet security (previous Anti Virus) also, I had Malwarebyte s anti-malware installed and did not get the message "security WARNING Windows turn on the firewall and malware". When I tried to click OK, it won't because I'm already using Norton and Malwarebyte s.
This message is very annoying, I want to turn it off, but I can't.
Would you please let me know the steps how can I disable it?
Thank you.
Hi Ari,
This could be a temporary problem, please run live on your Norton Internet Security Update, until you get the message "No updates available", and then restart the computer. If the problem persists, run Norton Reinstall tool by www.norton.com/nrnr to reinstall Norton Internet Security and let us know if this helps.
Thank you
Charlie
Norton support
-
In addition, Windows Update does not work.
Hello
Thanks for posting your question in the Microsoft community.
I understand that you are unable to install the Service pack 2 when you encounter the error 0x8000ffff.
I suggest you check out the link and follow the steps.
0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update
http://support.Microsoft.com/kb/946414
Let us know if you face difficulties.
-
I have two Toshiba laptops, and both died after the installation of Windows Vista SP2
I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.
Any help will be appreciated. I really need help.
Thank you.Well, try this:
- If the power is off.
- Start the laptop and keep press F8
- then select restore.
And? :)
-
HP G4 1303 at THE: the screen is blur after the installation of Windows Vista
Hello
Recently, I uninstalled windows 7 ultimate and installed Windows Vista (32 bit) , because my laptop was /hangig of blocking in Windows 7.Now my laptop runs smoothly, but when I play the vedios on my system through Windows media player / K-Lite player, the vedios fading little. The same problem that goes on when I watch Youtube vedios or photos even... This was not happening on my previous windows... I installed all the drivers in my Device Manager shows no warning...
The adopter of my screen is AMD RADEON HD 6480 G and sound have been updated...
kindly tell me what I need to do
Hello:
In the Device Manager in the category graphics cards is the AMD RADEON HD 6480 listed G graphic card, or is that just an adapter VGA Standard listed there.
If there is an adapter VGA Standard listed there that means you need to install the graphics driver AMD for Windows Vista.
If the graphics card Radeon HD is listed under the category of display device manager cards, then the only suggestion I can offer would be to download and install the latest version of Adobe Flash Player and see if that helps any.
-
I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:
Winload.exe
Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.
I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?
Thank you
Ryan
Hello
Do a clean install of XP with the XP disk provided by Dell, if you.
http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm
If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.
They should do this for a small fee.
You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
Vista installation was able to destroy this option of relocation:
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP
See you soon.
-
I have a Toshiba Qosmio G35-AV600 originally shipped with Windows XP. I did a clean install of Vista, which resulted in my remote no longer works. It runs on my laptop. But the contoller stopped working in Media Center window. And it does not turn off the computer. So basically so that Vista runs the remote is useless. I hope that someone a lot smarter than me can help you. I looked on the forums of computer manufacturers and known issues advice with no luck. I have visited many sites looking for a solution. Someone has an idea? This problem is fixable?
Check again - Device Manager this time select the option for "Show hidden devices'in view in the menu bar."
It can show the unit.
Other than that, you might be better off trying forums for Toshiba http://forums.computers.toshiba-europe.com/forums/index.jspa
-
How to restore missing zip folder after the upgrade to windows vista home premium 32-bit 7
restore the zip folder
Hello
How to disable Windows Explorer folder in Windows 7 Zip folder view, see option 2
http://www.SevenForums.com/tutorials/13619-zip-folders-enable-disable-Windows-Explorer-view.html==================================
If you need more features/functions an excellent 3rd party utility is 7-Zip - free
7-zip - free
http://www.7-zip.org/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
Install Firefox on the official Mozilla site installs Yandex side of it.
If I download the installer of this site, it installs Yandex.ru s * next to it. The thing is not on my PC, I found a thousand of searches on Google about removing it and I did it, but something is wrong with my Firefox browser now and to resolve this
-
How can I mark my post as SOLVED?
I posted a question and you have solved the problem myself. How it mark as resolved so that others don't waste time, you answer? Seems that some instructions Basic FAQ or help for this forum would be useful
-
Error code: 80070424 when you try to use Microsoft Update
I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp
-
my hp 1317 all in one printer print in black and white, what should I do?
I have problems with my hp 1317 printer. She no longer print in black and white. Any suggestions Thank you
-
Cannot install tax software because of the mistake of database on Vista.
2203.database error: C:\Windows\Installer\23cef3.ipi.I get this error message when I try to install the Turbo tax or software applications & H R Block tax software. "Error 2203.Database: C:\Windows\Installer\23cef3.ipi." Cannot open the database file