the value of keystrokes for grouping in batteries LR

Similar Questions

• can I format the values aggregated within a group

  Hello everyone,
  
  Question: How can I format the values aggregated within a group.
  
  I created a group of - >
  <? for-each - group:current-group(); / PZN? >
  ...
  <? end for each group -? >
  
  Inside the group, I have grouped the VALUE->
  <? amount (current - group (/VALUE))? >
  
  Now I want to format the VALUE. I tried to apply a mask to format #, # 0.00 and tried to apply
  <? format - number:(sum(current-group()/PREIS));' 999G999D99'? > but either workes.
  
  full code:
  <? for-each - group:current-group(); / PZN? >
  <? format - number:(sum(current-group()/PREIS));' 999G999D99'? >
  <? end for each group -? >
  
  Andybody knows what I'm doing wrong?
  
  Thanks in advance!

  Sorry, I got them mixed up. This should work for you:
  
  or
  

  I'm not sure about your version and xslt function, but it seems that it does not recognize the xdoxslt:format_number so I guess that is not supported in the version 5.6.3.

  BR
  Magnus

• Defining the new path for the data files for restoring using the VALUE of NEWNAME FOR DATABASE

  Version: 11.2.0.3 Linux
  
  Today, I had to do a restore RMAN to a new server and I came across the post following RTO on the VALUE of NEWNAME FOR DATABASE
  
  ALTER database open resetlogs upgraded;         error to throw
  
  So, I thought to use it to indicate the new location of the data files to restore.
  
  That's what I did
  ===================
  
  Restore the control file and catalog items to backup using the command of CATALOGUE START WITH. Then I started the restoration

  $ rman target / cmdfile=restore.txt
  
  Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jul 26 04:40:41 2012
  
  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: SPIKEY (DBID=2576163333, not open)
  
  RMAN> run
  2>  {
  3>  SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey';
  4>  restore database  ;
  5>  }
  6>
  7>
  8>
  executing command: SET NEWNAME
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of set command at 07/26/2012 04:40:43
  RMAN-06970: NEWNAME '/fnup/hwrc/oradata/spikey' for database must include %f or %U format
  
  Recovery Manager complete.

  Don't know how it worked for Levi without %f or %U. So, I added %f
  

   $ vi restore.txt
   $ cat restore.txt
  run
   {
   SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey/%f';
   restore database  ;
   }
  
  
   $ rman target / cmdfile=restore.txt
  
  Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jul 26 04:45:45 2012
  
  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: SPIKEY (DBID=2576163333, not open)
  
  RMAN> run
  2>  {
  3>  SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey/%f';
  4>  restore database  ;
  5>  }
  6>
  7>
  8>
  executing command: SET NEWNAME
  
  Starting restore at 26-JUL-12
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=19 device type=DISK
  
  channel ORA_DISK_1: starting datafile backup set restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  channel ORA_DISK_1: restoring datafile 00001 to /fnup/hwrc/oradata/spikey/1
  channel ORA_DISK_1: restoring datafile 00002 to /fnup/hwrc/oradata/spikey/2
  channel ORA_DISK_1: restoring datafile 00003 to /fnup/hwrc/oradata/spikey/3
  channel ORA_DISK_1: restoring datafile 00004 to /fnup/hwrc/oradata/spikey/4
  channel ORA_DISK_1: restoring datafile 00005 to /fnup/hwrc/oradata/spikey/5
  channel ORA_DISK_1: restoring datafile 00006 to /fnup/hwrc/oradata/spikey/6
  channel ORA_DISK_1: restoring datafile 00007 to /fnup/hwrc/oradata/spikey/7
  channel ORA_DISK_1: restoring datafile 00008 to /fnup/hwrc/oradata/spikey/8
  channel ORA_DISK_1: restoring datafile 00009 to /fnup/hwrc/oradata/spikey/9
  channel ORA_DISK_1: reading from backup piece /u07/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk
  channel ORA_DISK_1: errors found reading piece handle=/u07/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk
  channel ORA_DISK_1: failover to piece handle=/u07/dump/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk tag=SPIKEY_FULL
  channel ORA_DISK_1: restored backup piece 1
  channel ORA_DISK_1: restore complete, elapsed time: 00:01:56
  Finished restore at 26-JUL-12
  
  Recovery Manager complete.

  As you can see, RMAN restore data files to the desired location. But the data file names ended up as

  1
  2
  3
  .
  .      
  .
  9

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -----------| Holy Cow |-----------------------------
  
  
  So I had to rename each file as below
  

  $ mv 1 /fnup/hwrc/oradata/spikey/system01.dbf
  $ mv 2 /fnup/hwrc/oradata/spikey/sysaux01.dbf
  $ mv 3 /fnup/hwrc/oradata/spikey/undotbs01.dbf

  I would have been better in execution of the order for each data below file

  SET NEWNAME FOR DATAFILE

  Now, I think, there is no advantage in using NEWNAME SET of DATABASE to. Only the disadvantages. I did anything wrong above?

  Martin;

  On the issue of the VALUE of NEWNAME FOR DATABASE, you must specify at least one of the first three of the following substitution variables to avoid collisions of names: %b f % U. see semantic entry for TO 'filename' for a description of the possible substitution variables.

  You use %f

  %b
  
  Specifies the filename without the fully qualified directory path. For example, the datafile name /oradata/prod/financial.dbf is transformed to financial.dbf. This variable enables you to preserve the names of the datafiles while you move them to different directory. During backup, it can be used for the creation of image copies. The variable cannot be used for OMF datafiles or backup sets.
  
  %f
  
  Specifies the absolute file number of the datafile for which the new name is generated. For example, if datafile 2 is duplicated, then %f generates the value 2.
  
  %U
  
  Specifies a system-generated unique filename. The name is in the following format: data-D-%d_id-%I_TS-%N_FNO-%f. The %d variable specifies the database name. For example, a possible name might be data-D-prod_id-22398754_TS-users_FNO-7.
  

  Source - E10643-01

  Backup and recovery reference

  http://docs.Oracle.com/CD/E14072_01/backup.112/e10643/rcmsynta2014.htm

  I see CKPT and I agree on that!

  Best regards

  mseberg

• What is the table/column name for group of segments data

  Hello!

  I'm looking at the specific table/columns that contain the values for the segments of people group by assignment. Well want to can someone tell me.

  Thank you.

  Jon

  Join the pay_people_groups with per_all_assignments_f with the people_group_id of the column

• Does not restore the values of form for the restoration of the tab

  Part of my Web site uses a large number of forms on a single page. On the page, you can filter items (each item has its own form) and modify them. One entry looks like this: [name] [select status] [other Select]. Other important things are that the document has an expiration date in 1981 (to apply a page always up to date) and that change the value in the select results in the triggering of an AJAX function.

  It works perfectly, except for one thing. When filtering State id 1, you get back a little of the element. Let's say that the result of the filter are input 5. Change entry #2 status, which triggered an AJAX function. It works very well, but here's the problem: when close the tab and re-opening with Restore tab, select values become disheveled.

  Due to the execution of a fresh copy of the page, the browser will get a new copy of the page. Entry #2 is now gone (I'll keep calling it that, even if she disappeared because of the filter). Now, here's the problem: Firefox is attempting to restore the value to select it. Entry of the status #3 now has the same status of entry #2, #4 a #3 status and so on.

  I managed to solve this problem on other browsers (Chrome, IE) with this little piece of jQuery:
  {$(document) .ready (function ()}
  {$("form[class^='startingformname']").each (function ()}
  This.Reset ();
  })
  });
  It works perfectly, except for Firefox, which seems to ignore the call to reset...

  As this text is quite long, I'll keep my short question: How do you keep Firefox restore the values of the form (preferably: keep them on the selected item in the HTML)? Now, the user always gets a new copy of the page, and Firefox is trying to restore the old values on this page, even though the HTML code has changed.

  I think your two choices is:

  (1) prevent Firefox from page caching, or
  
  (2) use a different event to trigger your reset function

  As I understand it, the function $(document) .ready jQuery () raises the event DOMContentLoaded (or equivalent, if not supported by the browser). If the tab is cached in its ' cache fast back-forward ", Firefox can not fire this event when the user returns to the tab, just like Firefox does not always raise the load event in such cases.

  Discover the event more described in the following article and see if you can use it to trigger your reset function in Firefox: https://developer.mozilla.org/docs/Using_Firefox_1.5_caching

  Who is?

• Is it possible to use the batch is script to retrieve the value window server political group?

  Y at - it a batch command that will allow me to recover the value of group policy in Windows server? Something like gpedit.msc did, but I want because of the command line I want to convert this value to format I want.

  Example: If I open gpedit.msc, then I go to Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Restore files and directories so I can get the value (administrators, backup operators) of this policy.

  All ways in the batch script can bring me to this path and capture value?

  Thanks, your help is very appreciated.

  Hello

  You could try to look at the list of Group Policy scripts or repost the question to the Scripting Guys or in Forum Windows Server forum.

  The guys from script

  Windows Server

• PS possible bug on Wondows? Value of the radius of the value 0.1 for filter | Sharpen | Smart Sharpen does not at all.

  Hello

  I'm running the PS latest version 2015.1.2 (subscription) - 20160113.r.355 x 64
  I installed it on a Windows 10 computer and on a MAC El Capitan (OS X 10.11).
  

  But there is a difference in what a certain sharpening setting does not work on the Win10 PC.
  

  I chose:
  Filter | Sharpen | Sharpness...
  

  From there everything works OK on the Mac.
  But on the PC, a framework does not at all and it is if I set the RADIUS to 0.1.
  All other values respond normally, while the 0.1 parameter is simply dead (respond well on MAC).

  I (re) installed PS in Norwegian and English (International), but the problem is persistent.
  This could be a bug in the version of PS window?

  
  Concerning

  
  Erik Aaseth

  Norway

  Solved!

  When you enable more "accurate" for sharpness (under the gear wheel), the value 0.1 works too!
  But w / just "use Legacy" checked (by default), there is not admissible.

  

• To access the values of checkbox for the treatment

  OK, this topic has probably been beaten to death here, but I can't find relevant discussions or sort of do what I do work. Basically I have a report with a list of entries that can be added to a table. This table can be found be a "join table" which allows for a many-to-many join with the primary keys of the installation of two related tables in a primary key composed for the junction table.
  
  I have this process in the page that is supposed to make the appropriate insertion:
  

  -- insert or update assignment requests
  -- loop through the rows and do an insert for each selected row
  BEGIN
   FOR i in 1..apex_application.g_f01.count LOOP
    -- do an insert based on the selected rows
    insert into itil_svc_aud_join (service_id, audience_id, consumer, can_order)
    values(:P52_SVC_ID, apex_application.g_f01(i), apex_application.g_f02(i), apex_application.g_f03(i));
   END LOOP;
  END;

  : P52_SVC_ID is a popup LOV that saves its state value, g_f01 is a checkbox in the first column of the table, g_f02 and g_f03 are additional columns that I create in the report running through functions apex_item.checkbox.
  
  To this, the insert very well, it is simply not put in the values that the user could have selected the second and third boxes.
  
  Here's my query to create the report.
  

  select 
  apex_item.checkbox(1, b.audience_id) chk,  
   b.name audience, b.comments,
   apex_item.checkbox(2,0) cons_chk,
   apex_item.checkbox(3,0) order_chk
  from  itil_svc_audience b
  where  b.active = 'Y'
  and b.audience_id not in 
   (select audience_id from itil_svc_aud_join 
    where service_id = :P52_SVC_ID)

  As you can see from this that the second and third boxes are not an actual table columns, I just need them out there to get the change in status of the user during execution. Do a query of the join table is not an option because the records do not exist right now in this table.
  
  In any case, the point is that my insert do not enter values of the tables g_f02 and g_f03 application and forward them correctly. It's driving me crazy. Do I have to check the State of the people before you run the insert operation? I think I've done this before, but for the life of me can not find out how to get these values in the table. Any help?
  
  Earl

  Hi Earl

  I am happy that it works, although I'm not 100% convinced that your changes would work in all cases. Make sure you give him a good beating and test all possibilities. In addition, with 3 separate DML instructions I guess you should consider blocking update records.

  Shunt

• How to get the values of coordinates for a rotated rectangle / polygon?

  For a rotated rectangle or polygon (no rotation) coordinate values that I can extract are the visibleBounds or geometricBounds. But I want to access the exact coordinate values for the summits of the image.

  

  There in AppleScript:

  Tell application "Adobe InDesign CC 2014"

  mypathpoints the full path of the channel 1 of the selection value

  -Returns {{1.533492951824, 4.286597905696}, {3.125, 7.11}, {5.486507048176, 6.353402094304}, {4.026786834026, 3.150338420818}}

  tell the end

  So js you get the first path of the rectangle and then get entirePath, which returns a list of x, y coordinates of the four corners.

• Calculation of the value of ready for a custom time period

  Hello

  article (*) and some other sites describe how to calculate the percentage value of the ready time for the periods of time given (in real time, (day, week, month and year).

  States KB:

  There is a shortcut, you can use the following formulas for the intervals to update chart by default to get the loan % CPU:

  • Real-time: value of summons processor / 200
  • Last day: value of summons UC / 3000
  • Last week: value of summons UC / 18000
  • Last month: value of summons UC / 72000
  • Last year: value of UC summons / 864000

  But it is also possible to obtain the divisor for a custom time period?

  for example if I choose the period of 14.10.2013 - 14.10.2013 08:00 - 10.00. The period is 2 hours. But what is the divisor and how to calculate it for other periods?

  Any help would be greatly appreciated,

  Chris

  (*) VMware KB: conversion between the summation of values CPU and CPU ready %

  It depends on what adjustments to custom value data.

  for example. If the custom vale was spent time maintaining real so in your example it is 2 hours and then he gets back in the daily data, it would be in 5 min data points.

  same goes if my custom value went for 2 days, it will be so in the past set of data of the week etc. It does not display some of them in every week and then some in every day.

  BTW, the numbers you cited have an extra 0 on the end of each

  See you soon

• change the value of timeout for politics

  Hi people Idm.
  
  Can configure us a value of different expiration time on areas of policies protecting different applications?
  
  For example; domain01 /... politics has a session timeout inactive miunte 15 and political doomain02 /... should have a timeout of idle session of 6 hours.
  
  I don't think that we can, wanted to check if anyone had ever fallen on this requirement?
  
  Thank you!

  You are right, that we cannot set different deadlines for different areas.

  Because waiting times are at a level webgate you can always configure 1 webgate for 1 domain and differentiate the timeouts.

  Hope this helps,
  Sagar

• What is the value of threshold for db_cache

  My RAM is 2 GB and the SGA size is 800 MB. I have configured my DB_CACHE_SIZE = 350 MB. My question is, in this scenario, what will my DB_CACHE threshold?

  I'm just beginner ORACLE DBA so please explain in brief.

  Thanks awaiting response.

  Hello

  Seems that you speak of here:DBWR Checkpoints (per second)

  You can check the analytical parameters (undefined, in my view, it is internal algorithm (LRU) decide that)

  I found a link you can check it out, it can help you to understand & #8220; County of Touch & #8221; for the buffer Cache. IN ORACLE ENVIRONMENT...

• By pulling the values of Variables for my Table of facts

  Hi all
  
  The Load_Date of my fact table is currently, current_timestamp-1, the data are a day old when it's loaded. I want to get that date to a variable, because if I need to raise with an earlier date like 20 or 30 days before the current date, I don't want to touch the map instead, change the variable and run the package. Please advise on how to do this?
  
  Thanks for your time and your help.

  Do not you have correctly, but you can create a variable of refreshment with query like select sysdate-20 of: double. And then, you can use the variable everywhere.
  Thank you

• The value of encryption for HttpsURLConnection?

  Is there a way to define what ciphers (and protocols) a HttpsURLConnection must use?
  
  We have a very old client code that uses the a custom socket class to communicate (via HTTP) to a server, we were looking to scratch that old code replaces the Java URLConnection class, however; the user can set the SSL/TLS encryption (and protocols) that allows to connect to the server, we use essentially the (...) SSLSocket.setEnabledCipherSuite of the to do. Watching the HttpsURLConnection class there doesn't seem to be such a method and I don't see a mechanism readily available to do this.
  
  Thanks in advance

  You can do this via the system properties. See the page of network properties related to the guide to the features - Networking. You can also provide your own SSLSocketFactory that changes these settings for sockets, it creates: see the Javadoc for HttpsURLConnection.

  Why do you need to change the cipher suites?

• How can I pass the value of one for two binding settings

  Hi all
  I have a search query
  
  Select Distinct CONSOLIDATION_SUMMARY_ID, CREATION_DATE CREATED_BY BATCH_ID, PROCESS_FLAG, ERROR_MESSAGE, CUSTOMER_ID, BILLING_FREQUENCY
  CONSOLIDATION_LEVEL, SOLD_TO_ORG_ID, SHIP_TO_ORG_ID, TRANSACTIONAL_CURR_CODE, INVOICE_TO_ORG_ID, PRICE_LIST_ID
  ORIG_SYS_DOCUMENT_REF, INVENTORY_ITEM_ID, ORGANIZATION_ID, ORDERED_ITEM, ORDERED_QUANTITY, UNIT_LIST_PRICE
  UNIT_SEELING_PRICE, ORDER_QUANTITY_UOM, ORDER_NUMBER, ORDER_DATE, INVOICE_NUMBER, INVOICE_DATE
  FEE_CALCULATION_WORKSHEET_PDF, TRADE_DETAILS_PDF, INVOICE_REPORT_PDF, PRICING_ATTRIBUTE_CONTEXT
  PRICING_ATTRIBUTE, PRICING_ATTR_VALUE_FROM
  of xxcurrnx.xxcur_trade_consol_summary XXSTR
  WHERE XXSTR. BATCH_ID = NVL (: 1, XXSTR.) BATCH_ID)
  and XXSTR. CUSTOMER_ID = nvl (: 2, XXSTR.) CUSTOMER_ID)
  
  But I need to pass only one value to this query: throw the code below
  
  public void passTocusttrxn (String vcustid)
  {
  System.out.println ("trxn vo customer id:" + vcustid);
  
  XxcurtradeconsummaryVOImpl vOrdnumb = getXxcurtradeconsummaryVO1 ();
  vOrdnumb.setWhereClauseParam(0,vcustid);
  vOrdnumb.setWhereClauseParam(1,null);
  vOrdnumb.executeQuery ();
  
  System.out.println ("the query that is run after is:" + vOrdnumb.getQuery ());
  }
  
  But it throws the exception below.
  java.sql.SQLException: parameter IN or OUT to missing index: 1
  
  could you please tell me how can I achieve this.
  
  Thank you

  Hello

  I hope that the problem solved, pls, close it.

  Regads
  Meher Irk