the value of the Boolean attribute to "uncertain" by a rule in Word

Similar Questions

• To access the Boolean attributes in JDBCConnectionPoolParams in wl9.2

  Hi all
  
  I have problem with getting JDBCConnectionPoolParams with WLST Boolean attributes.
  I can list the attributes with ls():
  
  WLS: / lab_domain/domainConfig/JDBCSystemResources/ORA_RU94C3/JDBCResource/ORA_RU94C3/JDBCConnectionPoolParams/ORA_RU94C3 > ls ("")
  
  r - 1 CapacityIncrement
  -r - ConnectionCreationRetryFrequencySeconds 0
  -r - 10 ConnectionReserveTimeoutSeconds
  -r - fake CredentialMappingEnabled
  -r - true RemoveInfectedConnections
  -r - 10 SecondsToTrustAnIdlePoolConnection
  .
  .
  .
  -r - x isSet Boolean: String (propertyName)
  -r - x unSet empty: String (propertyName)
  
  I am able to get no Boolean attributes like
  / JDBCSystemResources/ORA_RU94C3/JDBCResource/ORA_RU94C3/JDBCConnectionPoolParams/ORA_RU94C3 > cmo.getSecondsToTrustAnIdlePoolConnection (print)
  
  10
  
  but when I try to get for example RemoveInfectedConnections in the same way I get this error
  WLS: / lab_domain/domainConfig/JDBCSystemResources/ORA_RU94C3/JDBCResource/ORA_RU94C3/JDBCConnectionPoolParams/ORA_RU94C3 > cmo.getRemoveInfectedConnections (print)
  Traceback (innermost last):
  Folder "system <>", line 1, in?
  AttributeError: getRemoveInfectedConnections
  
  
  I tried all the means that are in the manual... Any ideas?
  
  Thank you in advance for help.

  A Boolean attribute has an 'is' instead of 'get '.

  cmo.isRemoveInfectedConnections)

  You can also use get ('RemovedInfectedConnections')

• The element of Interaction of the user does not correct my Boolean attribute value

  Hello

  I'm just starting using the element of User Interaction. In my workflow, I set several attributes - some string and a Boolean value. I have a script task that makes treatment and eventually set these attributes. I then a piece of User Interaction that has these characteristics than external contributions. The Interaction of the user unit shows the correct values to strings, but the Boolean value is always shown as wrong - regardless of what I put the attribute in the script task immediately preceding.

  I'm confused. I plugged everything in the binding in the same way, but it does not seem to reflect the State of the attribute. I can switch the Boolean value in the Interaction of the user and the attribute is replaced as expected.

  Thank you

  Edit: I have reproduced this issue with a very simple affair. Make a new workflow and put only a part of the Interaction of the user in it. In the UI element, create an external of entry as a Boolean attribute of the workflow. Default font to True/Yes. When you run the workflow, the user interface element shows the value as a no.?

  Hello

  Looks like a bug in the client Java vRO (but works in vSphere client to Web). I am able to reproduce it in my environment, on the two vRO 6.x and 7.0.

  I'll open a PR in order to track and remedy in the future vRO releases.

  BTW, I vaguely remember there is a reported similar problem long time for vCO 4.x. It seems that the problem has reappeared again in silence

• void / vi based on the Boolean value

  Hello

  I have a main vi and I want to call a subvi based on a Boolean value, that is when the Boolean entry gets the true value, the sub - vi must run, otherwise it shouldn't.

  To do this, I added the Boolean control component connector of the sub - vi and I added a while loop in the sub - vi, which has 'continue if true' condition. I also made this point prescribed to the subvi.

  However, I noticed that even if the Boolean value false maintains execution of the sub - vi.

  Can you get it someone please let me know what the problem with this approach?

  Thank you

  Despres

  Put the Subvi code (or the Subvi set) inside the true case of a case structure and wire your boolean to that.  I prefer the second option.

  

  

• How to determine the Boolean value selected in a mouse down event pane?

  I have a lot of Boolean controls and indicators in my VI and I would determine what boolean is selected (left click) on a mouse down event pane.  Can I do this without having to specify each of the Boolean in the case of event configuration?

  Thank you.

  Jim

  If you get a ref to your Boolean all they have properties that define it location and size. Compare the location click with the limits of each boolean and where

  Left< click=""><>

  AND

  Back to top< click=""><>

  you have found the Boolean value that ended the click.

  It may be easier to use the Boolean refs table to create a dynamic event and then use the ref returned by the mouse down to get the label of the Boolean value that has been clicked.

  Have fun

  Ben

• How the Boolean value off the coast in the system bell auto College after 5 seconds?

  How the Boolean value off the coast in the system bell auto College after 5 seconds?... and also the Bell has to ring only the days... Please help me

  basically take the time, times of beginning and end, including the days of the weeks...

• How to add a transient attribute of a table values in the new attribute group wise transient that is to say wise customer?

  Mr President.

  How to add a transient attribute of a table values in the new attribute group wise transient that is to say wise customer?

  as below

  

  Concerning

  Hello world

  for an overview in the following form

  

  This is the sql query that reach this format

  SELECT c.name customer_name,
          p.name product_name,
          sl.sal_qty,
          sl.unit_sal_price,
          sl.sal_qty*sl.unit_sal_price AS salesvalue,
          CASE
            WHEN ROW_NUMBER () OVER (partition by c.cust_id order by p.prod_id desc,sl.sal_id desc) = 1 THEN
                SUM (sl.sal_qty*sl.unit_sal_price) OVER (PARTITION BY c.cust_id)
          END totals
  FROM customer c INNER JOIN sales s ON s.cust_id = c.cust_id
  INNER JOIN salesline sl ON sl.sal_id = s.sal_id
  INNER JOIN product p ON p.prod_id = sl.prod_id
  ORDER BY c.cust_id,p.prod_id,sl.sal_id
  

  Cheers and enjoy

  Respect of

• How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

  How to navigate to the next page based on the value returned by the method call inside the action attribute of the command key.

  I use JDeveloper 12.1.2.0.0

  < af:button id = "tt_b2".

  rendered = "#{attrs.nextRendered} '"

  partialSubmit = 'true '.

  action = "#{attrs.backingBean.nextAction} '"

  Text = "next".

  Disabled = "#{attrs.nextDisabled}" / >

  private static final String NEXT_NAVIGATION_ACTION = "controllerContext.currentViewPort.taskFlowContext.trainModel.getNext";

  public String nextAction() {}

  If (validate()) {}

  updateModel();

  Return NEXT_NAVIGATION_ACTION;

  }

  Returns a null value.

  }

  Use case is made for model train, which is being implemented based on this blog: http://javacollectibles.blogspot.co.UK/2014/10/ADF-train-template.html

  We define a generic action following in the model, but the action must be called under certain conditions, based on the question of whether all validation controls had been passed on no.

  You can do this in two ways:

  1 returnValue = (String) ADFUtils.invokeEL("#{controllerContext.currentViewPort.taskFlowContext.trainModel.getNext}");

  return returnValue;

  2.

  public String getNextTrainStop() {}

  String nextStopAction = null;

  ControllerContext controllerContext = ControllerContext.getInstance ();

  ViewPortContext currentViewPortCtx = controllerContext.getCurrentViewPort ();

  TaskFlowContext taskFlowCtx = currentViewPortCtx.getTaskFlowContext ();

  TaskFlowTrainModel taskFlowTrainModel = taskFlowCtx.getTaskFlowTrainModel ();

  TaskFlowTrainStopModel currentStop = taskFlowTrainModel.getCurrentStop ();

  Terminus of TaskFlowTrainStopModel = taskFlowTrainModel.getNextStop (currentStop);

  nextStopAction = nextStop.getOutcome ();

  _logger.fine ("train, next stop:"+ nextStopAction ");

  Return nextStopAction;

  }

• Save the value of a Boolean variable

  How can I save the value of a Boolean variable, so that when I open the file, it can be with the parameters in which I left?

  I created the variable to the top of the frame:

  var audio:Boolean = true;
  

  And I added the conditions for the buttons:

  if(audio == true) {
      Sound.play();
    }
  

  But whenever I open the application preferences is reset to true, wanted to leave with this preference be saved in the case of boolean, true (enabled) or false (disabled).

  can someone help me? Please, I beg you.

  Thanks in advance!

  A sharedObject is always appropriate for a local application. The only reason to use anything else would be size of storage needs.

• Getting the value of a Boolean value defined in the pageFlowScope...

  I have a link on one of my feeds defined task as a java.lang.Boolean with a value type of #{pageFlowScope.isAdmin}.  For the test, in my PageDefFile, I have the parameter defined as: < parameter id = "isAdmin" value = "false" / >

  In my managed bean, I'm trying to access the value of the "isAdmin" binding as follows:

  Boolean isAdmin = (Boolean) flowScope.get ("isAdmin");

  
  

  This gives me a caused by: java.lang.ClassCastException: java.lang.String cannot be cast java.lang.Boolean when I try to run the action.

  What I'm doing wrong here?  I know it's something stupid, but it's just one of those days... Thank you!

  write as

  to get the value in use of pageflowscope below

  ADFContext adfCtx = ADFContext.getCurrent();

      Map pageScope = adfCtx.getPageFlowScope();

   String appScopeValue=  (String)pageScope.get("vinay");

  Read more: http://www.techartifact.com/blogs/2012/10/setting-the-value-in-different-scope-in-adf-in-programmatic-way.html#ixzz30ISmbA9S

  to try to channel Boolean value as

  Boolean value = Boolean.parseBoolean (strBoolean);

• vCO WebView error - parameter value is not defined in the list of the Webview attribute

  Hello

  I tried to create a simple web view for Orchestrator (5.5.1 1617127), who will present a link to launch a single workflow. I followed the instructions in the Guide of VMware and the VCO Team Blog, but both find themselves with similar errors, which seem to have a common root: it seems that the display of web pages can not read the attributes.

  On the web page, I'll see something similar to the following:

  WebView - an exception has occurred.

  Reason: WorkflowLink component error: value of the parameter "attribute" (alias "workflow") ("createVM") is not defined in the list of the Webview attribute

  You may continue by restarting the session.

  In the server.log, I see the following: -.

  11:46:04.717 2014-10-02 + 0100 [http-bio-xxx.xxx.xxx.xxx-8281-exec-2] {} [WebviewExceptionPage] Exception Webview INFO - message:

  org.apache.hivemind.ApplicationRuntimeException: component error WorkflowLink: "attribute" parameter value (alias "workflow") ("createVM") is not defined in the list of the Webview attribute

  The createVM attribute is set in the correct web view as an attribute with a Type of Workflow and value to create simple virtual machine. I get a similar error any attribute type I try to get out of the workflow (the example of getVirtualMachineList does not create an error on the page, but is not fill the window and creates a similar message appears in the log).

  Can someone give me directions on what to watch next? I can't find anyone else with this error, which makes me think it might be something specific to this medium, but I can't work on what it could be.

  Thanks in advance,

  Ben

  I had the time this by restarting the service after each new attribute has been added, which was far from perfect, but looking around the forums, I have seen that WebViews were being obsolete, so I'll have to look at alternatives in any case.

• change the value of the location attribute in db jca file with the configuration file

  Hello

  How can I change the value of attribute of 'place' in the jca adapter db file by using the configuration level if possible?

  I have the database map file where the first two lines are:

  < name of the adapter-config = "getParty" = 'Database adapter' adapter wsdlLocation = "getParty.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/DB/CRP1"UIConnectionName ="crp1_apps"adapterRef =" "/ >

  ...

  I need to replace the configuration file

  EIS/DB/CRP1

  with

  EIS/DB/DEV

  but this isn't the case. I think that I am not referencing correctly but I don't know how he is correct, that I couldn't find examples for composites and wsdl content, JCA file.

  Please share the idea.

  Thank you

  Anatoliy

  Anatolly salvation,

  You can assign a new value to the property of JCA by using either the Ombudsman as BPEL.

  Pick click entitled value option and add the right attribute to the property JCA jca.db.DataSourceName.

  In BPEL will zoom click the invoke for the DB adapter, go to the Properties tab and add the right attribute to the property JCA jca.db.DataSourceName.

  (edit)

  If you want to use a configuration file to set the value, I suggest a BPEL property, the value can be replaced by using a configuration file and can be assigned to the JCA property using ora: getPreference ("prefName as string");

  When you use a mediator does not have a preference, and you can use a placeholder that you change when you compile the SCA composite. With ANT in combination with hudson, you can easily replace the value (hard) by the environment.

  See you soon,.

  Robert van Molken

  Specialist of the integration of Oracle

  Post edited by: robertvm

• How to remove the value of the XML attribute in the Indesign file with javascript

  Hi all

  How to remove the value of the XML attribute in the Indesign file.

  

  What error is this?

  in any case try this as well (one another),

  var myDoc = app.activeDocument;
  attrDelete(myDoc);
  function attrDelete(elm)
  {
      for (var i = 0; i < elm.xmlElements.length; i++)
      {
          try{
              for(j=0; j
  Vandy
  		   

• Update values dynamically in an attribute of the user who is the search field

  Hi all
  
  Can I have a pre process handler to update the values in the search field on my userpage to create? I have two user attributes: one is the default organization and the other is a country created by the user attribute. These two are lookup fields. I want to update the field of research by checking what is selected in the search field organization. Is this possible in IOM?
  
  Not sure if the process pre event handler is the way to go, but that's what I want to achieve. Can anyone guide me regarding the same?
  
  Thank you
  $id

  OK, here's my shot at a walkthrough... Let me know if I missed any steps.

  1. from your original post, you use two search boxes. I'm using a basic VM test, so I need to create two. I went with the city and State (I know they are OOB, but this is just an example).
  -Created Lookup.Custom.City and Lookup.Custom.State samples:
  Lookup.Custom.City
  Code key-Decode
  Miami-Florida
  Orlando-Florida
  New Orleans and Louisiana

  Lookup.Custom.State
  Code key-Decode
  Florida-Florida
  Lousiana-Louisiana

  -Creation of custom attributes UDF: Advanced-> user-> Actions Configuration-> the attributes of the user (LOV)
  -City Office and the State Office

  2 use weblogicExportMetadata.sh to export /metadata/iam-features-requestactions/model-data/CreateUserDataSet.xml

  3. change the CreateUserDataSet.xml to add:

  4. use weblogicImportMetadata.sh to import CreateUserDataSet.xml

  5 run. / PurgeCache ALL (same directory)

  6. go on request - create user (this example is for the provision of the basic application)

  7. If everything went well, when you select State, say Florida, then when you click on the search for the city, you will see Orlando and Miami. If you toggle the State of Louisiana, you will need to click on search again on the city and New Orleans should be the one that is displayed.

• How do I format based on the value of the @status attribute?

  Example: I use the @status attribute to indicate that a step in a procedure is new or a paragraph in a new concept.

  For review purposes, I want to format new text in Green - Green preference the highlight, but the green text will do.

  Example: I use the @status attribute to indicate that a step in a procedure has been deleted or that a paragraph in a concept has been removed.

  For review purposes, I want to format new text as a bar.

  Is this possible? If Yes, where can I configure the formatting in attribute values?

  Thanks in advance.

  Marsha

  Hi Marsha,

  If you want the formatting to be "locked in", which is led by ESD, then advice from Lynne is the way to go. If instead, there would be enough temporarily color the items you want as a substitute format, you can use the AXCM plugin:

  http://www.weststreetconsulting.com/WSC_AXCM.htm

  This plugin can do any character coloring, bar, etc., based on attribute values and other markup. Colouring is applied as an alternative format and removed easily by a refresh of the ESD. The characteristics of color were mainly intended for purposes of conditional text, but it would work in this case too.

  AXCM is totally free. Warning... I am owner of West Street Consulting and this plugin.

  Russ