The value of the tpinfo structure member

Similar Questions

• Cross and copy files to the new structure

  Hello people!

  I had a huge task I'd like to simplify with a bit of Applescript.

  Basically, I would like to move or copy a lot of files in a new folder structure.

  I have a few different folders with all 500-4000 jpg, see image below.

  First picture shows the old structure, 2nd picture show the new structure I would accomplish.

  

  I want to do is have a script to loop through and take the first 4 characters of the file name and create a folder with that name in the location of my choice.

  Then, create a new folder in the parent called JPEG folder and copy all of the files with the same name specific to this folder.

  So far, I've been able to automate the creation of folders and subfolders.

  any help is appreciated

  loc to choose a folder "choose the Parent folder location."

  Repeat with I from 1 to 3

  the value d to text - via -1 of 2 ("51" & I as text)

  Try

  tell application "Finder" to set targetFolder to create a new folder in loc with properties {name: "61" & j}

  tell application "Finder" to create a new folder to targetFolder with properties {name: "JPEG"}

  tell application "Finder" to create a new folder to targetFolder with properties {name: "PSD"}

       end try

  end Repeat

  Hello

  You could try the AppleScript script which is a simple bash script wrapper.

  It will allow you to choose the source directories and destination and then analyze the source for jpeg files tree and copy the jpeg file with name starting with excatly 4 digits IJKL to the correspondent-I000/IJKL directory in the destination. In the destination path directories are created as it should. For example, your screenshots, you can choose the folder '7000-8000' or its parent directory in the source directory and the "OBJECTS" folder as the destination directory.

  Any jpeg file which doesn't have a name starting with exactly 4 digits is ignored. Verbose output of the CP (1) and any errors will appear in the result pane / window (Apple Apple) Script Editor.

  --APPLESCRIPT
  set src to (choose folder with prompt "Choose source folder where source tree is rooted at")'s POSIX path
  set dst to (choose folder with prompt "Choose destination folder where destination tree is rooted at")'s POSIX path
  if dst starts with src then error "Source tree may not contain destination." number 8000
  set args to ""
  repeat with a in {src, dst}
      set args to args & a's quoted form & space
  end repeat
  
  do shell script "/bin/bash -s <<'EOF' - " & args & "
  SRC=${1%/}
  DST=${2%/}
  {
  export LC_CTYPE=UTF-8
  while IFS= read -r -d $'\\0' f
  do
      n=${f##*/}
      [[ $n =~ ^(([0-9])[0-9]{3})[^0-9] ]] || continue
      p=${BASH_REMATCH[1]}
      q=${BASH_REMATCH[2]}
     
      jpg=${DST}/-${q}000/${p}/JPEG
      psd=${DST}/-${q}000/${p}/PSD
      [[ -d $jpg ]] || mkdir -p \"$jpg\" || continue
      [[ -d $psd ]] || mkdir -p \"$psd\" || continue
     
      cp -v -pPR \"$f\" \"$jpg\"
  done < <(find \"$SRC\" -type f -iname '*.jpg' -print0)
  } 2>&1
  exit 0
  EOF"
  --END OF APPLESCRIPT
  

  Briefly tested under OS X 10.6.8 but no guarantee of any kind. Please make sure that you have a full backup of the original directories before running this kind of script.

  Good luck

  H

• Change the Directory Structure created in the MPZIP file

  I'm trying to normalize my projects of Multisim for inclusion in our documentation control system. As I build my project, I have a directory structure that I use. When I include the files in the project, the directory structure is known in the MPZIP file. However, the default value is decompress all the files in the external folder (name of the project). Suite to help,

  Hi Doug,.

  When you unpack the project, the default is to create a new folder and put it all together because it is unlikely that the new computer will have the same file structure as the computer on which this project of.  If you want Multisim to create the same structure as the original file, you can click in the cell under "excerpt from path" and select the old path, if the folder does not exist, Multisim will create a.  Unfortunately, you will need to do this for each item on the table.

• problem of data flow in the case structures (using a state machine)

  Good day everyone.

  I'm having a problem with the flow of data between the structures of the case.

  I try to use an example of a state machine for this simple problem. but when I try to send data of a box structure to change the State of the code. It will change not in the desirable output, instead, it offers the possibility that the exit options emul.

  could someone please point what I'm doing wrong here. Any kind of help would be very appreciated.

  With a quick glance at your photos a question you have is that you use not data flow. You write your status updated in local variables value. Your State should pass through the case structures are a single wire. Playback of your order "Enum", happened in the register shift on the right side of your loop probably get running and reading before any processing occurs within the structure of your business. That's why you're reading the old value of the State and not the update. or have a classic case of a race condition in your code.

• limitation of the same structure add cases

  Hello

  Can I know any excretion have the same structure add event .bcase if I use more than 50 events in strucute even.

  I posted on the forums about the recording of the change in value on multiple controls here and here.

  There is no real problem having lots of event, but it takes a lot of time for each of them create then because I'm lazy, I'm trying to find ways to accelerate my LabVIEW programming - if you have a lot of events that do the same thing, so you can save time by having a single piece of code manage events.

• Property at the time of the balance and the formula of Member - dimension account

  Hello

  We have a member account including the Balance of time as 'Average' property and she member formula. When I pulled Q1 or CDA data in the report, is to show the average value of TB. But my requirement is to show the calculated value of the formula be insteaded of value avearge TB for this member of the account.

  Please let me know how I can accomplish this requirement

  Thanks in advance for your help.

  in the interface of planning go into the beam and pass the value of the average flow

• Question about the formula of Member and BegBalance

  I have a requirement where I need to calculate the value of '' suffering '' and need to save it somewhere so that I can use it to display on the dataforms.
  
  The logic of the last value Due must be--
  
  Suffering = year previous year Total + current (Jan: Prior month)
  
  I was planning to write a formula for this member. Can I use substitution variables, as title, etc. PriorMonth in the form of Member to achieve this?
  
  In addition, since we do not use BegBalance Member for purposes like the display on the dataform etc. can I use for this requirement where I can write the formula of the BegBalance member and give it an alias name 'Suffering' I can use to show on the dataforms. Is this possible?
  
  Please let me know. All entries are appreciated.
  ~ Hervé

  Hello
  Perhaps it should look like this:
  & priorYr-> YearTotal+@sum(jan:&currMonth);
  / * No need to specify the current year as it would be fixed in pov, column or page. If necessary, replace the sum with @sumrange(&currYr,jan:&currMonth) * /.

  See you soon,.
  Alp

• the table structure

  How to copy the table structure in oracle without constraints?

  Some constraints are copied in whole;

  create table w (order_type varchar2(1));
  insert into w values ('N');
  insert into w values ('C');
  insert into w values ('D');
  insert into w values ('X');
  
  alter table w add constraint pk_w primary key (order_type);
  
  create table t (x number, order_type varchar2(1) constraint t_fk references w (order_type) );
  
  insert into t values (1, 'X');
  
  commit;
  
  create table t2 as (select * from t where rownum < 1);
  
    1  select table_name, constraint_name from all_constraints
    2* where table_name in ('T', 'T2')
  SQL>
  SQL> /
  
  TABLE_NAME                     CONSTRAINT_NAME
  ------------------------------ ------------------------------
  T                              T_FK
  

• Keep the folder structure for AVCHD (.mts) video

  Hi all

  Can someone confirm if or not the PP CS4 and AE CS4 requires the AVCHD folder structure to be left in tact?

  I just found this http://blogs.Adobe.com/davtechtable/2008/09/intro_to_cs4_and_new_avchd_edi.html

  Who says...

  ... Make sure you leave the structure of folders. Drag it to the new folder as an exact copy. This will ensure that you will have everything you need. Importer for PremierePro (also used by AfterEffects & still) uses folders and files to help identify the parameters and types of files without tape.

  ... so clearly, it is better to do, but it is actually necessary?

  I have not bought the CS 4 software yet, but I intend to, however, this can be a problem, as I have more than 6 months with a value of sequences, most without the folder structure. It was too embarrassing trying to maintain and also the files in an organized way. I tried various video editing software demonstrations, and all those I tried (including the Premiere Elements) worked fine with just the files .mts, without the extra stuff.

  I also used AE and PP trial versions, but these do not seem to support .mts at all. After reading the various threads on the topic but, I concluded that it was just a missing feature in trial versions.

  Thank you very much

  Eugene

  What I do (with XDCAM-EX images) is a structure of directories like this:

  Customer A / B of the project / Stick 1 /BPAV

  Customer A / B of the project / Stick 2 /BPAV

  ...

  ...

  Customer B / project / Stick 1 /BPAV

  ...

  etc.

• How to export all the photos of Photos with the folder structure

  Topic says it all...

  I found tons of posts on how to export pictures from Photos, but clearly an important feature is missing. How to export one or more folders, subfolders, and albums to the breast?

  I need on a regular basis (read: scripted) to export all my photos for use on another platform. But I need to keep my organized all files as they are in the pictures.

  Anyone know of a script that can do this? Opening could [R.I.P].

  Thanks 1million in adv.

  Björn

  Photos can export using the subfolder structure to give you the files corresponding to moments

  a user has provided a script for this for albums - Albums export records - Script of Jacques Rioux

  and old toad has planned that the script compiled as an app - http://www.oldtoadstutorials.net/No.P01.html

  LN

• How to import photos from iPhoto to the Photos without losing the date structure

  Hey there,

  Today, I realized that not all my photos to the Macintosh iPhotos Photos last year. At this point, I'm missing about 700 photos.

  Is it possible to merge the iPhoto to the existing photo library library while keeping the structure of date? I tried just to drag some photos but they then imported as if they were taken today.

  If possible, I want to keep the date structure so that all the photos that were taken at the same time will remain together.

  Export images from iPhoto to the Finder, and then import them to Photos.

  File-> edit

  This trick of the user

  https://discussions.Apple.com/docs/doc-4921

  a details of the options in the export dialog.

  Ignore the file date.

  There are two types of metadata involved considering the jpeg or other image file.

  One is the data file. That's what shows the Finder. That tells you nothing about the content of the file, just the file itself.

  The problem with the metadata file is that it is easy to change the file is moved from one place to another or exported, by electronic mail, downloaded, etc.

  Photographs have also obtained the Exif and IPTC metadata. The date and time that your camera broken that the photo is saved in the Exif metadata. Without worrying if that said the date of the file, this is the actual time recorded by the camera.

  Applications of photo like iPhoto, Aperture, Lightroom, Picasa, Photoshop etc. get their date and time of the Exif metadata.

  When you export from iPhoto to the new Finder file is created containing your Photo (and its Exif). The file date is reported - exactly - the date of export.

  However, does not change the Date of the Photo.

  The problem is that the Finder doesn't work with Exif.

  Thus, your photo has the correct date and the file does, but these are different things. To perform a sort on the date of the Photo, you will need to use a photo app.

• Google Drive not visible in the tree structure Diadem Navigator

  Hello!

  In our company, we use Google Apps. Google Reader is a handy tool to use to ensure the instant backup of your files. However, my problem is I don't think Google Reader in the Navigator tree structure, at least not systematically. There were occasions where the drive was visible, but now I can't find. The reader has no doubt exists and is accessible in Windows Explorer. Anyone know what could be the problem and how to fix it (except avoid Google Drive as working space)?

  Hi Brad,

  Thanks for your suggestion, it worked very well worked.

  But before I tried to add a new drive, I've been playing with different modes in the browser tab. I discovered in the mode 'Data bank' with 'My computer' as source (or root), the directory structure has no problem to display Google Reader - works fine.

  High til' today, I didn't know there are two display modes available, I've always been using the mode "data search". In the mode "Data search" Google Reader does not appear when you try to navigate to the local C drive. In the 'data' finder Google Reader mode is only available when add you it as a drive in Windows Explorer.

  So long story short, if you want to have easy access without problem to your Google Reader in DIAdem, add it as a drive in Windows Explorer.

• DAQ Assistant no recorded data during the case structure is false

  I try to turn it on turn off heater using intermittent relay module (some time and some free time). The program attached that do very well. Except that I also want to record the temperature of the radiator using materials DAQ Assistant and it records all the data when the case structure is false. I mean, when the relay is off. I tried to use the vi for the acquisition of data in the structure of the case. However, aparently it is not possible to call the module analog input even twice in the same program. All solutions? Thanks in advance.

  
  

• compare files with the same structure of channel / rename channel(-groups)

  Hello

  I have several groups ch with many channels in the file of each measure.

  Now, I need to display/compare Channels 2 or more files of measures in a chart. (channel 'speed1' to the file 'measurement1' vs 'speed1' to the file 'GCA2' channel)

  So I import 2 files in the browser und have the same structure of string twice. To distinguish between the channels of the two files I want to rename the channels by script and add the file name of the channel-group name.

  Is this a common way to compare measurement data in files with the same channel names and structures?

  In the affirmative. How can I make a script?

  Thank you very much in advance!

  Ski

  Hi Ski-Fahrer,

  each channel has a name of the institution.

  Data.Root.ChannelGroups ("Name" or Index). Channels (Index or "Name"). Name

  You can assign a new name like this:... Name = "NouvNom".

  I don't think it is necessary to rename the channels. If you do not forget the files. If you want to rename something I only rename the ChannelGroups by adding a date or a serial number.

  Kind regards

  Philipp K.

  AE | NOR-Germany

• Structure of the event in the event structure

  Is it possible that I can have a structure of the event, which is in another structure of the event? When I run the code, I can't use other buttons. (See chart for details)

  

  Do not put the event structures in the structures of the event! There is never any reason to do so.

  Redefine architecture your code in a correct state machine.

  (By default, events lock the façade until the event ends and if you raise the event internal or external, first of all, the other event can never fire because the current event can never accomplish or is inaccessible by data stream.)