The values of date time values are not complete

Similar Questions

• The values are not displayed in the user interface

  Hello.
  
  I use jdev 11.1.1.5
  
  I need to refersh tha table
  
  I had created a TPTrialBal EO with corresponding VO. I had dragged and dropped it as an adf:table
  
  I had also created an adf:button named build., when I click on this button, some values are inserted into the TPTrialBal I need to show the value inserted in the user interface.,.
  How can I do this.,.
  
  could someone help me pls

  After update of data in the table add patialTrigger to the table component.
  You can do it by doing this. In the behavior section property table contains call partial property triggers here you
  adjustable from which component partial triggers this component, you can select your command button.

• Displaying an Enum value and the name of the element when the values are not sequential

  Hello

  I use Enum and controls indictators successfully with shared and modbus variables.

  For example:

  Name of the element Value

  Off:                0

  Start 1

  On                2

  Œuvres enum Setup, I don't need to look for a cheat sheet to convert the name of the element in its value, I see the name of the item in my order/indicator.

  My new variables, I'm currently managing look like this:

  Name of the element Value

  Code 0 x 201

  Beginning Code 0 x 202

  Code 0 x 001

  Any ideas how I can display the value and the name of the element on a façade. (for a control and indicator)

  For enumerations, it seems that the item values must go 0,1,2,3,4,5

  I found the solution:

  http://digital.NI.com/public.nsf/allkb/79BA4505AE8C755E86256FB2000140B0

  use a ring of text and deselect the sequential box

• Instead of trigger is running, but the values are not inserted into the view

  I created a view
  create or replace view as select e.department_id, e.last_name, d.department_name employee e, Department d where e.department_id = d.department_id;
  
  create or replace trigger trgg instead of inserting it on vns for each line
  declare
  The CNT number;
  Start
  Select count (*) in the cnt of employees where department_id =:new.department_id;
  If cnt = 0 then
  insert into employees (department_id, last_name) values(11,'nandu');
  end if;
  Select count (*) in the cnt of the Department where department_id =:new.department_id;
  If cnt > 0 then
  insert into dept (department_name) values('wrestling');
  end if;
  end;
  /
  This is the code required. .plz answer the right

  create or replace view
  vns as
  select e.department_id,e.last_name,d.department_name
  from employees e,departments d
  where e.department_id=d.department_id;
  
  create or replace trigger trgg
  instead of insert on vns
  for each row
  declare
  cnt number;
  begin
  select count(*) into cnt from employees where department_id=:new.department_id;
  if cnt=0 then
  --insert into employees(department_id,last_name) values(11,'nandu');
  insert into employees(employee_id,email,hire_date,job_id,department_id,last_name)
                 values(207,'[email protected]',sysdate,'AC_MGR',11,'nandu');   --- Values you have to choose!!
  end if;
  select count(*) into cnt from departments where department_id=:new.department_id;
  if cnt>0 then
  insert into departments(department_id, department_name) values(11, 'wrestling');  -- department_id is needed
  end if;
  end;
  /
  
  -- testing with existing dept id = 10
  
  insert into vns(department_id) values(10);
  
  SQL> select * from departments where department_id = 11;
  
  DEPARTMENT_ID DEPARTMENT_NAME                MANAGER_ID LOCATION_ID
  ------------- ------------------------------ ---------- -----------
             11 wrestling
  

  Requirement, you must be knowing well
  Show you how the trigger must be according to your point of view and logic inside the trigger or you recreate in order to avoid the required values in the trigger body.

  Thank you!

• Select only records where the column values are not all equal to zero

  Hi everyone, it seems so easy, but it has left me speechless on the research in a way that is clean, easy to achieve. I know when someone replies, I'm going to kick me. So, let's assume this is what I have:
  

  with mytable as (
  select 'Type 1' as itemtype, 'JAN' as monthname, 0 as theval from dual union all
  select 'Type 1' as itemtype, 'FEB' as monthname, 1 as theval from dual union all
  select 'Type 1' as itemtype, 'MAR' as monthname, 5 as theval from dual union all
  select 'Type 1' as itemtype, 'APR' as monthname, 1 as theval from dual union all
  select 'Type 1' as itemtype, 'MAY' as monthname, 4 as theval from dual union all
  select 'Type 1' as itemtype, 'JUL' as monthname, 0 as theval from dual union all
  select 'Type 1' as itemtype, 'AUG' as monthname, 0 as theval from dual union all
  select 'Type 1' as itemtype, 'SEP' as monthname, 1 as theval from dual union all
  select 'Type 1' as itemtype, 'OCT' as monthname, 7 as theval from dual union all
  select 'Type 1' as itemtype, 'NOV' as monthname, 1 as theval from dual union all
  select 'Type 1' as itemtype, 'DEC' as monthname, 2 as theval from dual union all
  
  select 'Type 2' as itemtype, 'JAN' as monthname, 0 as theval from dual union all
  select 'Type 2' as itemtype, 'FEB' as monthname, 0 as theval from dual union all
  select 'Type 2' as itemtype, 'MAR' as monthname, 0 as theval from dual union all
  select 'Type 2' as itemtype, 'APR' as monthname, 0 as theval from dual union all
  select 'Type 2' as itemtype, 'MAY' as monthname, 0 as theval from dual union all
  select 'Type 2' as itemtype, 'OCT' as monthname, 0 as theval from dual union all
  select 'Type 2' as itemtype, 'NOV' as monthname, 0 as theval from dual union all
  select 'Type 2' as itemtype, 'DEC' as monthname, 0 as theval from dual
  )
  select
    itemtype,
    sum (case monthname when 'JAN' then theval else 0 end) as JAN,
    sum (case monthname when 'FEB' then theval else 0 end) as FEB,
    sum (case monthname when 'MAR' then theval else 0 end) as MAR,
    sum (case monthname when 'APR' then theval else 0 end) as APR,
    sum (case monthname when 'MAY' then theval else 0 end) as MAY,
    sum (case monthname when 'JUN' then theval else 0 end) as JUN,
    sum (case monthname when 'JUL' then theval else 0 end) as JUL,
    sum (case monthname when 'AUG' then theval else 0 end) as AUG,
    sum (case monthname when 'SEP' then theval else 0 end) as SEP,
    sum (case monthname when 'OCT' then theval else 0 end) as OCT,
    sum (case monthname when 'NOV' then theval else 0 end) as NOV,
    sum (case monthname when 'DEC' then theval else 0 end) as DEC
  from mytable
  group by itemtype
  order by itemtype

  I need an external application around it or something which will select only 'Type 1'... that is, if all months are each equal to zero, do not include the record in the result set.
  
  In summary to get a total of zero is not an option, because I could have-15 and + 15 in different columns, in which case, the recording should be displayed.
  
  Something as simple as... 'not the case (oct = 0 and 0 nov and dec = 0...) at the end is all it seems to me necessary. I thought to add a case for each column clause, but that seems not very effective. Ideas?
  
  Thanks in advance!
  Mark
  
  Edit... I know not what follows will work using the MINUS operator, but my actual query is really huge, and I don't want to have to write it twice...
  {code}
  Select
  ItemType,
  sum (case monthname when "JAN" then Val else 0 end) such as JAN,.
  sum (case when monthname 'FEB', then Val 0 otherwise end) by Feb.
  sum (case when monthname 'MAR', then Val 0 otherwise end) like MARS,
  sum (case monthname when "APR" then Val else 0 end) as APR.
  sum (case when monthname 'MAY', then Val else 0 end) either.
  sum (case when monthname "JUN", then Val 0 otherwise end) as JUN.
  sum (case monthname when "JUL" then Val else 0 end) as JUL,.
  sum (case monthname when "AUG" then Val else 0 end) as AUG.
  sum (case monthname when "MS" then Val else 0 end) as MS.
  sum (case monthname when "OCTS" then Val else 0 end) OCT.
  sum (case monthname when "NOV" then Val else 0 end) as NOV.
  sum (case monthname when 'DEC' then Val else 0 end) as DEC
  FROM MyTable
  Group of itemtype
  
  less
  
  Select
  ItemType,
  Jan, Feb, mar, Apr, may, June, July, August, Sept, oct, nov, dec
  de)
  Select
  ItemType,
  sum (case monthname when "JAN" then Val else 0 end) such as JAN,.
  sum (case when monthname 'FEB', then Val 0 otherwise end) by Feb.
  sum (case when monthname 'MAR', then Val 0 otherwise end) like MARS,
  sum (case monthname when "APR" then Val else 0 end) as APR.
  sum (case when monthname 'MAY', then Val else 0 end) either.
  sum (case when monthname "JUN", then Val 0 otherwise end) as JUN.
  sum (case monthname when "JUL" then Val else 0 end) as JUL,.
  sum (case monthname when "AUG" then Val else 0 end) as AUG.
  sum (case monthname when "MS" then Val else 0 end) as MS.
  sum (case monthname when "OCTS" then Val else 0 end) OCT.
  sum (case monthname when "NOV" then Val else 0 end) as NOV.
  sum (case monthname when 'DEC' then Val else 0 end) as DEC
  FROM MyTable
  Group of itemtype
  )
  where (oct = 0 & nov = 0 and dec = 0 and jan = 0 and 0 = Feb and mar = 0
  apr = 0 and may = 0 and = 0 jun and Jul = 0 and aug = 0 and Ms = 0
  )
  order of itemtype
  {code}
  
  Change again... OK, I guess that I am answering my own question here, but I think that by using a WITH to write the main request once clause and then selecting * twice using the MINUS operator between where the second query is where (oct = 0, etc.) is what I need. If anyone has better suggestions, please let me know! Here's the logic of nickname for what I come up with to date...
  
  {code}
  WITH mainquery as (select all)
  Select * from mainquery
  less
  Select * from mainquery where (oct = 0, nov = 0, etc...)
  {code}
  
  Thanks again!
  Mark
  
  Published by: user455268 on March 1, 2012 19:13
  
  Published by: user455268 on March 1, 2012 19:16

  Hello

  You can do it with a HAVING clause:

  select
    itemtype,
    sum (case monthname when 'JAN' then theval else 0 end) as JAN,
    sum (case monthname when 'FEB' then theval else 0 end) as FEB,
    sum (case monthname when 'MAR' then theval else 0 end) as MAR,
    sum (case monthname when 'APR' then theval else 0 end) as APR,
    sum (case monthname when 'MAY' then theval else 0 end) as MAY,
    sum (case monthname when 'JUN' then theval else 0 end) as JUN,
    sum (case monthname when 'JUL' then theval else 0 end) as JUL,
    sum (case monthname when 'AUG' then theval else 0 end) as AUG,
    sum (case monthname when 'SEP' then theval else 0 end) as SEP,
    sum (case monthname when 'OCT' then theval else 0 end) as OCT,
    sum (case monthname when 'NOV' then theval else 0 end) as NOV,
    sum (case monthname when 'DEC' then theval else 0 end) as DEC
  from mytable
  group by itemtype
  HAVING      MIN (theval)     != 0
  OR      MAX (theval)     != 0
  order by itemtype
  ;
  

  If the values are all 0, then the MIN and MAX will be 0.
  If the MIN or MAX is not 0, the values are all 0.

  This assumes that the combination (itemtype, monthname) is unique, because it is in your sample data.
  If this is not the case, start with a subquery that GROUPs BY itemtype, monthname, so that when you get to the main request, this combination will be unique.

• Structure of the case: selector values are not unique

  Get the error: case Structure: selector values are not unique...

  With the help of producer-consumer architecture w / SW-events and comms of queue.  DevSuite - LV2014

  My loop of consumers use a typedef for case selection control.  The typedef is an enum and the names of text for each value.  All my files are in quotes and there are no duplicates in the typedef or structure of the case.

  Help

  JF

  Jeff.F wrote:

  Get the error: case Structure: selector values are not unique...

  With the help of producer-consumer architecture w / SW-events and comms of queue.  DevSuite - LV2014

  My loop of consumers use a typedef for case selection control.  The typedef is an enum and the names of text for each value.  All my files are in quotes and there are no duplicates in the typedef or structure of the case.

  Help

  JF

  I don't know what you're doing exactly what I think. Do not write text in quotes for values box. Wire the enum in the switch case, right-click on the structure of the case and select "add a case for each value.

  It might be a little different because I'm teliing memory.

  Ben64

• iDRAC error on PowerEdge R720 (SWC0700: iDRAC is not ready.) The configuration values are not available.

  My PowerEdge R720 started with iDRAC Initialization Error as topic above.

  SWC0700: iDRAC is not ready. The configuration values are not available.

  Noise of FAN after pressing F1 to continue. Please what can I do? It's my edge transport server and it is now off to find out what needs to be done. Please notify.

  Been,

  Network administrator,

  ExecuJet Aviation Nigeria.

  Hello, I'll email you to ask for the serial number. Thanks Marco

• In the column of table when the values are grater that maximum linear axis it does not show the bar

  Hi guys,.

  In the column of table when the values are grater than there maximum linear axis it does not show the Bar.But I want to display the bar up to the maximum limit of the axis is linear without changing the limit max.

  Consider following the example:

  The values are 80 90 200 300

  and here is the result:

  Left: when I don't put maximum property of linear axis.

  Right: when I put in maximum property of linear axis to 200.

  

  Law 4th bar is not visible because the value of this bar is 300 which is excedding maxium. But I want the 4th bar to appear identical to 3 bar.

  How can I do this?

  Thanks in advance.

  Then you should change the value of Y to the maximum value.

  Another option, you should consider is changing the Render item column to reflect that the value is greater than the specified maximum value.

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• After deactivation of elements using Javascript, the values are missing when the...

  .. .page is submitted.
  
  Friends,
  
  I have my page apex in the attribute of the HTML Body with some Javascript functions I wrote to determine the following:
  
  < pre > onLoad = "RadioGroupEnableDisable ('P213_COMPLETED', true); disableStartEndDate(); "< / pre >
  
  
  These disable a group of radio buttons and two text fields and work as expected, the values in the controls, I can't change the values and the values are changed properly when I navigate to the next record.
  
  However
  
  When I try to edit a field that allow entry and try to save the changes when the page is submitted, I have an error message stating that the required fields are null (these are the same fields that I disabled).
  
  Is this expected behavior? or I'm doing something very wrong?
  
  Any help will be very appreciated!

  Hello

  Disabled items are not submitted. It's standard HTML.
  What is your problem

  BR, Jari

• Applications show that up to date, but they are not the current versions

  I'm doing OSX 10.8.5 deployable image.

  Office CC tells us that applications are up to date, but they are not.
  I tried to uninstall and reinstall applications, only that she either go to a previous version (the original version of CC) evem and Office CC always said that it is up-to-date.

  I also tried using CC Cleaner and reinstall with the same results.

  I also noticed that CC Cleaner does not seem to remove completely all files from adobe.  In fact, applications of ADVANCED and a few others still remained in the applications folder.

  Can you give me any advice?

  Hi bretts,.

  Please see the steps mentioned in the article: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

  Kind regards

  Romit Sinha

• Can not get the title and date/time to appear on the photo to develop, or a library

  I must have done it when I was trying to do some other keyboard shortcut and got hurt - and now I can not understand how to get rid of. But a few weeks ago I did something and now the file name, date/time and size image appear in white text on the top left of any photo I have in develop it or library screens:

  

  So you can see "_MG_0955.CR2" and other details in the clouds. Does anyone know how to get rid of it? I can't find anything in one of the menus. I'm on Lightroom 4.3 for Mac OSX Mountain Lion.

  Thank you!

  Ltter that I you keyboard through the Loupe View Info (even in the develop Module).

  You set what you want to see by pressing cmd + J - and select the parameters for Info 1 and Info2.

  Letter I cycles this way: 1 - Info 2 - no overlay Info.

• Search and replace values in the text field before the values are stored in DB

  Hello
  There is a question - answer and text box text field - in my application. Problem is, some of the answers are stored with the apostrophes to the DB and I have a problem while recovering in the DB. I need to replace the single quotes 1 with 2 apostrophes. The values are stored in the DB when you click on the submit button.
  
  So, I'm using the following javascript code:
  italics
  < script type = "text/javascript" >
  function test().
  {
  var str = "& P2_S1.";
  document. Write (Escape (STR));
  }
  < /script >
  italics
  I need to call this javascript function, when the user clicks on the button submit, but BEFORE the values are stored in the DB. How can I get this done?
  
  Please let me know.

  Hi Suzi,

  Just use

  begin
  update test set S1=replace(:P2_S1, '''', '''''') where name=:APP_USER;
  end;
  

  as you did in your SELECT statement.

  But I shake also why you want to do? Where do you have problems with the apostrophe?

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins

• I need to know the file current date/time number stamp and the version of "spoolsv.exe" in Vista Home Premium 32-bit with SP2.

  I need to know the file current date/time number stamp and the version of "spoolsv.exe" in Vista Home Premium 32-bit with SP2. My spooler file got corrupted and I need to know what that the stamp of date/time on the latest version of the file: spoolsv.exe. I did a search on my hard drive and found 8 copies of the file with 7 different dates. I need to know which copy in my file C:\windows\system32\. I suspect that the problem was caused by some kind of malware. I think that some of the different versions on my machine of the initial installation of the Vista, SP1 and SP2. 3 copies that would explain. I tried all the suggestions in this forum and several others. I tried sfc/scannow and it simply replaces the corrupted file by another. I understand how works this file and a simple copy will do the trick if I knew that the file to use. I know that I don't want to go back to the first version of 2006.  BTW... my symptoms are all my printers have disappeared, and when I try to 'add a new printer' I get an error message saying that my spooler service does not work. When I opened my services window it shows that indeed, he is arrested, but I will not start because the description column contains only the code garbled machine indicating that the file is corrupted, or it may contain a virus. I had been using F-Prot until this virus got by and now I use AVG. I scanned my machine with several cleaning packages and it is is more infected, but I worry that from this corrupt file grow something. I know that the problem is not with my printers or drivers, because everyone on my home network can print on all of my printers. None of the people I know are on Vista 32 bit. They are all running System 7 or XP. I have XP, except that a few years ago I suffered from the "Syndrome of Pepsi" on my laptop and when I bought a new HP, it came with Vista.

  Version 6.0.6002.18294

  Day 17/08/2010

  Duration 14:11

  Duration may vary in different time zones.

• Treo 755 p and Windows - HotSync jumps calendar and Agenda - "Conduit DateCond.dll: no link found for the Creator ID 'date'." Conduit did not run. »

  I've owned a 755 p for almost a year now. For much of this time, my hotsyncs were jumping the Calendar/Contacts and calendar apps. These two work very well on the Palm Desktop and on the Treo itself. I checked the unit and the palm Desktop for corrupt files. There are not. When I was with Palm Desktop 4 (before 6 is available for XP), the lines were always listed as disabled. I could help and do a hotsync, but no data has been synchronized and would return to being disabled. If I tried to set it as enabled by default, the Hotsync application would break! So, I've lived with this absurd situation for 6 months now. Finally, I tried upgrading to Palm Desktop 6.2 and had no problem, but the problem persists. HotSync on the desktop PC simply ignores these lines entirely, even if it does not display error messages after a sync. The lines are listed as enabled.

  I made a full backup and then uninstalled Palm Desktop 6.2 completely. Restarted and re-installed Palm Desktop 6.2 and tried to sync again. The problem persists.

  My next step (and where I am now) would allow to debug and documented in the Hotsync application logging. Once I did, I discovered the specific problem, which apparently is entirely hidden from the end user. Here are the specific journal entries:

  Led DateCond.dll: No association is found for the Creator ID "date." Conduit does not run.

  Led DateCond.dll: No association is found for the Creator ID "SNLT". Conduit does not run.

  Led AddrCond.dll: No association is found for the Creator ID 'addr '. Conduit does not run.

  Led AddrCond.dll: No association is found for the Creator ID "PAdd". Conduit does not run.

  I was not able to find something on the Internet about these errors. Nothing on the Palm site, nothing in these forums. I checked the database files are indeed on the handheld and have good creator ID. I don't understand how a complete re-installation of software still leaves it with a kind of missing association. But clearly there is something that lack prevents Hotsync to understand exactly what it is supposed to do here.

  I can't just wipe my machine and start over. I have a lot of contacts and calendar on the device entries that are not on my PC and vice versa. Find and fix all those differences manually would be months of work with my limited free time. So if anyone has any suggestions on how to solve this problem, please let me know. And no, I'm not going to waste time calling support Palm. I gave up on the phone with Palm years ago support.

  It's part of the problem. You might want to hard reset the device, and then rename the folder to BACKUP on the PC. (CProgram Files/Palm or Palmone / * Hotsync username * / Backup.) Change to the old files then synchronize with your existing username.

  Message relates to: None