I got a new monitor. It works fine when it is not plugged into my computer....

Similar Questions

• Satellite C660 - 10 d - Wifi don't work if the PC is not plugged into the mains

  Hello!

  My pc is not connected to the internet if is not plugged in the light.
  Can someone tell me what's in it?

  Thanks :)

  Hello

  What model mobile exact you have?

  You can improve management of power supply for the WLan settings!
  If that doesn't work, update the Wlan driver too!

• Fluid width works fine when exporting, but not on BusinessCatalyst

  Any suggestions?

  Thank you!

  Actually, what did was properly organize master pages (copy paste) and it worked.

  This tutorial helped to understand.

  New! Adobe Muse 2016 tutorial | Master Page tips - YouTube

• Toshiba Satellite A665D-S5175... wireless works fine on AC, but not on battery

  Satellite A665D-S5175... I loaded windows 8 preview... I was really in LOVE... Afterwards, I had to reformat back to the original "out of the box" due to windows 8 not to recognize seagate hard drive (even if the compatibility check does not list)... Since then my wireless internet works fine when on the current but will not work on battery... my battery works fine and wireless works fine on all my other wireless devices... can't help but to think it's some type option to power supply but I can't find it to save my life... Help! Toshiba wants to much $$ to ask me this? their staff... I don't HAVE a big $$$ LOL! Thanks to anyone who can shed some light on this...

  Hello

  Change the power setting on default battery for the wireless network adapter. Configure the wireless network adapter to use the maximum performance setting when Windows Vista or Windows 7 is configured to use the balanced power plan or the power saver Power plan. To do this, follow these steps:
  1. click on start
  2 type Power Options in the start search box, and then click Power Options in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. click on change settings for the plan under the management of the diet that is selected. For example, if the balance is selected, click on change settings under balanced plan.
  4. click on change advanced power settings.
  5. in the Power Options dialog box, expand wireless adapter settings, and then power saving Mode.
  6. in the list that appears next to a pile, click performance, and then click OK.
  For more information, see the link.
  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point
  http://support.Microsoft.com/kb/928152

• My daughter just got a new laptop... of course it is not a CD/DVD drive. On his previous laptop that she had Photoshop CS6 extended... loaded from a disk. So now, we try to know if she can download and use his 'KEY' of the disk?

  My daughter just got a new laptop... of course it is not a CD/DVD drive. On his previous laptop that she had Photoshop CS6 extended... loaded from a disk. So now, we try to know if she can download and use his 'KEY' of the disk?

  See download Creative Suite 6 applications

  Hope this helps

  Thank you

  Varun

• The problem that I have for a week, it is that my screen is fine when the laptop is plugged in but fades when it is not plugged in.

  I have a Samsung NC10 that I bought in 2008 and the problem I've had for a week, it is that my screen is fine when the laptop is plugged in but fades when not plugged in - it ' s like going to a brightly lit room, in a room where the lights are dimmed... What can I do to remedy this? My battery runs down? Can I us my laptop plugged it my battery die? I must admit that I left basically still my laptop plugged...

  Check the settings of the display under battery power and adjust accordingly - How to adjust the brightness of the screen under Windows XP.

• EPA 11, in an ongoing project (45 min. of material), expert opinion, active project Panel is empty!, if I Add Media to my project Panel files open but it is empty. This has happened with no cure 2 days ago. Yesterday it worked fine. Today is not w

  EPA 11, in an ongoing project (45 min. of material), expert opinion, active project Panel is empty!, if I Add Media to my project Panel files open but it is empty. This has happened with no cure 2 days ago. Yesterday it worked fine. Today, it does not work. I closed and then open the program several times now without success. Active project Panel is non-existent (empty so that I can"move my project.) Help, please!

  hankholmes

  What operating system is involved?

  If Windows 7, 8, 8.1, or 10, please remove the Adobe Premiere elements prefs file.

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  11.0

  and in the 11.0 folder is the Adobe Premiere elements Prefs file that you delete. If it does not, then delete the entire 11.0 the folder in which the Adobe Premiere elements Prefs file exists. Don't forget to work with folder Option show hidden files, folders and disks enabled so that you can see the full quoted path.

  What is the duration of your project, when the problem is? You have the same problem if you open a new project? Where are your stored source media, and do you get coloured poster of the Offline Media in the open project (in thumbnails active project or in the content of the timeline)?

  For any question or need clarification, please ask.

  Thank you.

  RTA

• Pop-up windows are working fine in IE but not in FireFox

  I'm sorry if some of you useful people are tired to see my questions, but...

  I have a page with thumbnails (which float right through altruistic Grandpa) and by clicking on each thumbnail opens a new window with a larger photo and text version. It works fine under IE - the window opens and closes as it should - but in FireFox, it creates a second browser window which must be closed manually in order to return to the index page.

  Any suggestions?

  http://acemon.com/features.html

  -Ace-

  Where you have this in your code:

  target = "_new">

  Remove the target = "_new".  You don't need this here because the popup script opens a new window.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Tween alpha works fine in preview, but not in the swf file

  I was wondering if anyone could offer some suggestions. I have a few words written in text mode static I made a graphic symbol. On the timeline, I used the motion tween and classic Tween to create change aplha from 0% to 100%.  I made sure that I have enoough to space on my calendar (10 images).

  Aplha interpolation works fine in preview, however when I export the swf file the aplha interpolation doesn't work anymore? I tried to break the text, flash of reboot, restart my computer and similar proposals for other items such as:

  I was able to fix this by checking the box 'use bitmap caching DURATION' in Blend in the properties panel for the MovieClip in question.

  I am currently using Flash CS5 on an imac. Would be grateful for any suggestions, that I do not understand how something that worked very well, has suddenly stopped working? Bug?

  Thanks in advance

  Stace

  Create a new fla and duplicate your efforts with your tween alpha of your text.  any problem?

• My mouse pointer moves in the opposite direction, I intend when I use the touchpad on my laptop. It works fine when I use my docking station and external mouse. How can I fix it?

  I'm using Windows Vista with a Sony Vaio laptop.  At the office, I have a docking station with keyboard and external mouse.  Everything works fine with this Setup.  But when I unplug the docking station and use the touchpad on the laptop, my mouse pointer moves in the opposite direction, that is my intention.  I move my finger and the pointer down.  I move to the right and the pointer goes left.  How can I fix?

  Go to start /Control Panel, and then double-click the icon '' mouse. '' When this window opens, select the tab "Touch Pad" at the top. There's a box near the bottom called "Touch sensitivity", click on that. Change the settings a little bit lower than what they are currently at.

• WD5000AADS 500 GB hard drive. Windows XP Device Manager says it is installed and working properly, but it does not appear in my computer. Help!

  The disc was an external USB disk, but the fitting broke so I took off the adapter and I try to use it via its native SATA connectors. The disc is spinning and the computer know when it starts in Windows XP. It says new hardware found and go through the installation process. Windows finishes the installation, and says that everything is good with the world. I look in Device Manager and it says "this device is working properly" when I click on the drive properties. THEN..................... I click on MY COMPUTER and viola! No. DRIVE shown where the WD5000AADS should be there. There is nothing except my C: drive and my CD - DVD players.

  There are a few important (to me) information on this drive and I need to do.  HELP Please!

  Thank you

  twoiron

  Hi twoiron,

  • You are able to access the other USB devices on the computer?

  See the link below and run the Fixit tool available, check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  If him above fails tool Fixit check if the player is detected in disk management and has a drive letter assigned.

  To open disk management

  (a) from the start menu, click Run.

  (b) in the Open box, type diskmgmt.msc, and then click OK.

  If the drive is detected in disk management and the drive letter is missing, then assign a drive letter to the drive and check if that helps.

  How to change drive letter assignments in Windows XP

  http://support.Microsoft.com/kb/307844

• my wifi is not working, and my troubleshooting does not start on my computer toshiba laptop? and he tells me that my bluetooth must be turned on?

  my laptop WiFi does not work and when I try to trouble shoot the problem he told me that my troubleshooting does not start and also, I get a message telling me that my Bluetooth is turned off?, but this problem all started when I tried to sing on the web and it keep going back to the sign in screen then I cleaned a lot and finally was a less able to get to my office on it but still no wifi and not able to start troubleshooting and still receive a Bluetooth message not on. ????? Help! Please, I beg you!

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the brand and model of the computer?

  2. what exactly happens when you try to connect to a WI - FI connection?

  3. you get any error message?

  4. are you able to connect to the Internet by cable?

  5 are. what store you referring?

  6. what operating system is installed on your computer?

  7. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  If this is a recent problem, then you can try a system restore to Normal mode or safe mode and see if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can see the following link.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows 7:

  For Windows 7: http://windows.microsoft.com/en-US/windows7/System-Restore-frequently-asked-questions

  For Windows Vista: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  Reference: Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please follow these recommended steps and post if you still experience the problem.

• my new speakers do not work even if its on and the model says it works fine. I get no sound form my computer.

  I use a HP deskyop computer. I also have Windows XP on it. I recently bought a pair of speakers and tried to use it on the computer, but it did not work. So I bought another game, something different, and again, it won't work. I even borrowed another pair, but in vain. I need to know if there is something wrong. What should I do? I can't hear ANYTHING from my computer and it's really annoying me right now.

  The following article might be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (Win XP / Vista / 7)

• My compaq presario v6000 screen is totally blank but works fine when connected to the external monitor

  Hello

  I have the above equipped with windows vista, I have a totally white screen and have tried to shine a bright light and I see nothing.

  the OS is vista

  any ideas on what is the problem?

  Thank you very much

  Hi totallybusted,

  Try conecting an external monitor to the video output of your laptop connector. If you can see the video when you turn it on the LCD screen has failed. It must be rplaced to return your laptop to a usable state.

• Cannot connect every android device on my Windows 8 machine via USB. Worked fine when I got Windows 7.

  Since my upgrade, I can access is no longer my Nexus 7 Tablet nor my EVO 4 G LTE phone on my computer via a USB cable. I searched the Internet far from help. So far, it seems that no one can connect via USB. Thanks a bunch of Microsoft.

  Hi DanWilson,
   
  Thanks for the post about Microsoft Community.
   
  It seems that you are not able to connect any devices android on your computer with Windows 8.
   
  I would like to collect some of you before we head to the troubleshooting steps.
   
  (1) are you getting any error message or error code when connecting android devices?
  (2) are your other devices Universal Serial Bus works well?
   
  I would ask you to please follow the troubleshooting methods listed below:
   
  Method 1: Run the hardware troubleshooting tool. Follow these steps:
  
   
  a. press the Windows key + W key on the keyboard.
  b. type Troubleshooting in the search box, and then press ENTER.
  c. click on hardware and sound.
  d. click Next to run and follow the steps to perform this troubleshooting.
   
  Method 2: Try to connect to another Universal Serial Bus port and check if it helps.
   
  Method 3:
   
  Uninstall and reinstall the USB controllers. Follow these steps:
  
   
  a. press Windows + R keyboard key.
  b. type devmgmt.msc , and then press ENTER.
  c. expand Bus USB controllers.
  d. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  e. restart the computer and reinstall the USB controllers.
   
  
  I recommend you to download and install the latest driver from the manufacturing site.
  
   
  Please go through the following links as reference:
  
   
  Install USB 3.0 and other USB devices:
   
  http://Windows.Microsoft.com/en-us/Windows-8/install-USB-3-USB-devices
   
  Why Windows is not find my device?
   
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device
   
  Why Windows is not find my device?
   
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device
  Please write back to us if the problem persists.