the video creator dazzle digital works for the xbox too?

Similar Questions

• Prefetch is just a feature for Windows programs, or work for 3rd party too?

  My understanding of Prefetch is that it monitors the use of programs and try to anticipate when they could be used and so loaded them in memory, ready to go.

  It is just a feature for Windows programs, or work for 3rd party too?

  For example, I use OpenOffice and the first time I open it, it takes several seconds to open. If I close and open the program via a session then always opens almost instantly (about two or three seconds) so it must be in RAM somewhere. Yet every day the initial aperture is slow.

  Is - not what Prefetch is supposed to address?

  Hi Mooly,

  You can read the following article and check:

  What is the prefetch folder?

  If you are concerned about the start time, you can consult the following link:

  Optimize Windows Vista for better performance

  Hope this information is useful.

• Embedded video html will not work for mobile

  Hello

  I have a video embessed successfully on my desktop site, but I can't make it work for mobile:

  You can see here on the desktop: MTV ART HOUSE MOSCOW

  I put the same code in the mobile version, I didn't change the width and height, can someone please help me solve this problem?

  < video controls = "orders" preload = 'auto' width = '1010' height = "581" autoplay = "autoplay" >

  < src = "assets/source trailer.mp4' type =" video/mp4">"

  < / video >

  For mobile I changed it to:

  < video controls = "orders" preload = "auto" width = "290" height = "171" autoplay = "autoplay" >

  < src = "assets/source trailer.mp4' type =" video/mp4">"

  < / video >

  Hello

  Please try to enter the code below in the phone layout. (I've marked the change in bold)

  ".. /Assets/trailer.MP4' type = "video/mp4" >

  Muse create a phone available in a new folder named like 'Phone' as there is no active folder we need to correct the path of the directory in the phone layout. I corrected that in your code.

  Concerning

  Vivek

• How can I get my Centon Pro to work for my xbox

  I tried to plug my CENTON dataStickPro into my xbox today and it didn't work it said

  ---------------------------------------------------------------------------------------------------------------------------

  Cannot configure

  Your device has failed the test of data loss and cannot be configured. Please use a different device.

  For other storage options, visit www.xbox.com/storage.

  ---------------------------------------------------------------------------------------------------------------------------
  It would really help if I could get answers soon...
  THANKS - COD3

  Hello

  I suggest you to see the steps in the following link.
  

  Error: "can't configure" occurs when the configuration of USB storage on a Xbox 360 http://support.Microsoft.com/kb/981976

  NOTE: The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  If the problem persists, contact the Xbox Forums at the following link:

  http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx

  Hope the information is useful.

• I need help for an email, that it must be swiched or something because I can't get my account to work for my xbox

  is there anyone who can get is parental to work or move E-mail or something plese help

  Hello

  ·          Are you referring to the XBOX live account?

  ·          What happens when you try to connect?

  ·          You receive an error message?

  See the following article:

  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

• my windows photo gallery will play is no longer my videos (they have been there for 2 years and always worked before, now when I try to play them just the photo gallery)

  my windows photo gallery will play is no longer my videos (they have been there for 2 years and always worked before, now when I try to play them just the photo gallery)

  Maybe some type of update caused a compatibility issue.
  Doing a system restore to an hour before the beginning of the question could
  be worth a try:

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• The AV Digital adapters stop working for no reason

  I'm on my 3rd adapter in more than a year, they work for about 5-6 months and then one day I plug it to watch a movie and I get a message this device may not work properly, and that of all, no more signals no matter what I do. I have to go and buy a new one.

  You may want something like that

  http://www.Apple.com/shop/product/MD098AM/A/Apple-Digital-AV-adapter

• I get the error message "a license is required to play the selected song or video. However, a license for this file is not found, has expired or has been altered"while trying to play a downloaded song

  Original title: Media Player

  Yesterday, I downloaded a song.  Now my Windows Media Player will not play anything.

  I get the same room whenever I try to start each song in my library:

  Media usage rights acquisition

  wmasf.MusicNet.com

  A license is required to play the selected song or video.  However, a license for this file is not found, has expired or has been altered.  To obtain a license for this content, please visit the website or open the software application in which the file was uploaded originally.  You need to connect or buy the song or the video.

  I ran several diagnostic, and remedial programs, but nothing worked to get media player to work (without getting this popup Media Player and stop).

  It seems to be a kind of malware that has damaged something in my windows media player.  When I put "wmasf.musicnet.com" in the address line on explore, I get only the same message as the pop-up.

  Anyone know how I can fix the media player and get rid of this problem?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooters in Windows Media Player and check if it helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Open the troubleshooter in the Windows Media Player library:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:

  Try to reset the management of digital rights (DRM) and check if it helps.

  Follow the steps to reset the DRM:

  1. first of all, check that the hidden files and folders option is enabled.
  To do this, follow these steps:

  a. start Windows Explorer. To do this, click Start, type userinit.exe in the Search box and press ENTER.

  b. click on organize, and then click folder and Search Options.

  c. click on the view tab.

  d. click Advanced settings.

  e. under hidden files and folders, click Show files and folders, clear the Hide protected operating system files (recommended) box and then click OK.

  2. Locate the DRM folder on the computer.
  In general, the DRM folder is located in the following location.
  Note In these paths, drive represents the drive on which Windows is installed.
  Windows 7 or Windows Vista.

  a. Windows 7 or Windows Vista versions x 86-based
  drive: \ProgramData\Microsoft\Windows\DRM

  b. Windows 7 or Windows Vista versions x 64-based
  drive: \ProgramData\Microsoft\Windows\DRM

  3 Rename the file DRM DRMbackup.

  a. right click on the DRM folder and then click Rename.

  b. type DRMbackup, and then press ENTER.

  c. close Windows Explorer.

  Warning: You must contact any third-party stores where you purchased music to reset the licenses for that music. If you copied CDs for protected Windows Media Audio files, the CD must be copied again.

  For more information, see the following Microsoft article.

  The Player Windows Media DRM: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-DRM-frequently-asked-questions

  Hope the information is useful.

• I've updated the plug ins and it worked for 3 hours. What now?

  I was unable to watch the videos on my laptop. I have windows. I clicked on update my plugins and it worked for 3 hours. I even disconnected and then when I restarted the "keep your firefox healthy" right page went up and update plugins is still 'twirling '. Help

  in general only versions out-of-date Flash need to be activated, please install the update through https://www.mozilla.org/plugincheck/

  If you have problems with this, try the offline installers offered by adobe to https://www.adobe.com/products/flashplayer/distribution3.html instead (for firefox download & install the exe windows for "browser plugin").

• Code 80070241 in Windows update and "Windows cannot verify the digital signature for this file" when you try to run any program.

  Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.

  I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »

  After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).

  The restoration went well, restarted, but the problem persists.

  Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.

  The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.

  The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.

  It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.

  On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.

  The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.

  Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.

  However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.

  ***************************************************

  Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?

  Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.

  This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.

  So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.

  Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.

  * shrug *.

  Computers.

• 0xc0000428 error - "Windows cannot verify the digital signature for this file."

  Original title: 0xc0000428 error

  I'm using Windows Vista and I already had the problem, "the Windows Boot Configuration data file is missing required information" which I have rebuilt the bcd for. Now it won't let me not restart due to the error 0xc0000428, stating "Windows cannot verify the digital signature for this file. How to do this?

  Hi Rajisace,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  ·         Please provide us with the file information in the error message.

  Method 1: Try to start the computer using the last good known Configuration and check if you can successfully start.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: I will suggest you to do material clean boot and check to see if you encounter the same problem.

  1. right click on my computer-> properties

  2 Hardware tab Device Manager->

  3. right click on the sound card, video card and NIC, one by one, then click on turn off

  4 restart the computer.  If the problem is resolved, you can then enable the devices one by one to find the exact mechanism causing the problem

  After you find the device that is causing the problem you can solve by installing the latest driver or replacement of the unit.

  I will also propose you to check if the boot priority is set on hard drive and check if you experience the same problem.

  Method 3: Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

  Hope this information is useful.

• Dell PowerEdge T110 II add on the video graphics card that works

  The system configuration:
  Dell PowerEdge T110 II
  BIOS 2.8.0
  RAM 2x8GB

  For many reasons (for example feeding bus PCI), it is difficult to install a Dell PowerEdge T110 II graphics card.  The ATI Radeon HD 5450 is a good choice for the Dell PowerEdge T110 II because if its (approximately 10W) low energy consumption.

  After trying several HD 5450 (listed below), a graphics card that works is a "VisionTek Radeon HD 5450 - graphics card - Radeon HD 5450 - 2 GB memory DDR3 - PCI Express 2.1 x 16'.

  Edit: Thanks to paikat for the following references, (see his assignment for the links, where to buy)...
  VisionTek manufacturer: 900356
  Reference Dell: A6173020

  This card works when the monitor is connected to the VGA/D-SUB/DB15 connector. I wasn't looking to connect to HDMI or DVI connectors.

  After you install this graphics card, passed the BIOS Setup:
  Integrated Devices > integrated video controller: enabled

  by saying:
  Integrated Devices > integrated video controller: Standard

  and allowed to move from "Standard" to "Distributed" so it now says:
  Integrated Devices > integrated video controller: distributed

  Note: Install the card with the monitor connected to the integrated video port / edge, change the BIOS to Distributed settings, restart the computer and then connect the monitor to the Discrete / distributed / video port to Add on.

  Here are the identifiers on the "VisionTek Radeon HD 5450 - graphics card - Radeon HD 5450 - 2 GB memory DDR3 - PCI Express 2.1 x 16'

  54502GBPC
  VT 5450 PCIe 2GB V/D/H
  VT-400746PC
  PCB #R81KLD-PJ3Z
  R71KLD
  R81KLD
  Version: 1.0
  G0850000-0351L002739CZA-0087
  SH6 94V-0
  E248779

  Here are some pictures of the 5450 VT from DELL:

  

  

  Other video cards that have been tested and work well in T110 II are:

  * XFX Radeon HD 5450 1 GB GDDR3 VGA/DVI/HDMI Low Profile PCI-Express graphics AMD card HD545XZQH2; HD-545 X-ZQH2
  Note there is another version of this card is ONXFX1PLS2 who has not tested.

  * EX-PX610GT-video JATON GeForce GT 610 2 GB 128 - Bit DDR3 PCI Express 2.0 x 16 HDCP ready low profile ready card video

  * Reference DELL SOUND H545H1G Radeon HD 5450 (Cedar) 1 GB memory DDR3 64 bit PCI Express 2.1 x 16

  I hope this can help others avoid the frustration when you try to install a video card in a Dell PowerEdge T110 II.

  SR2002

  I have read this thread and seen the suggestion of VisionTek, it also works with the card mother E3-1230V2?

  My guess is the Dell PowerEdge T110 II uses the same motherboard for various configurations of CPU, but this is only a guess.

  SR2002

  Also, are there better options eventually with the support of 12 DDR5 and directx?

  None that I know, but I've only tried a few cards. Please let us know if you find cards better than the VisionTek 900356

  SR2002

  I saw a thread suggesting ASUS GTX650-E-2GD5, someone at - he of the inputs on this card?

  I tried a GeForce GT 610 2 GB and it did not work.  Check the use of the GTX650-E-2GD5 (DPT) power and make sure that it is less than 25 watts (see below)

  Quick notes:

  1. the location of PCIe x 16 is actually a "full-size x 8 slot" (also known as an x 16 slot / x 8) and the video card needs to work in this type of accommodation.

  2. video card power (TDP) is a limiting factor. Technical guide Dell says "the system supports a maximum power of 25 W for all four cards PCIe.»  and said Dell owner's manual "ATTENTION: to ensure correct cooling, not more than two cards of four extension may have more than 15 W power consumption (maximum 25 W each), not to mention the integrated storage controller card."

  3 install the card with the monitor connected to the integrated video port / edge, change the built-in BIOS devices > on-board video controller 'Activated' / 'Standard' to 'Distributed', restart the computer and then connect the monitor to the Discrete / distributed / video port to Add on.

• Status: 0xc0000428 Windows cannot verify the digital signature for this file.

  This is the message that appears:

  Windows Boot Manager
  A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source.
  If you have a Windows installation disc, insert the disc and restart your computer. Click 'Repair your computer' and choose a recovery tool.
  Otherwise, to start windows, so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Startup Options, then select last known good. If you understand why the digital signature cannot be verified and want to start Windows without this file, temporarily disable driver signature enforcement.

  status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file.

  * So what the hell is happening? Sorry, but am getting very frustrated by that. I noticed that windows creates a file called windows.old. Avoid the old windows, it's an empty hard disk, and it was an installation of full version. NOT an upgrade. As to why my product key does not work... not even me angry by publishing what I've seen elsewhere in these forums. I DO not pay another $200 for a different product key. This one should work. I just opened this "thing" to do the installation. So if this key was stolen, it was stolen that microsoft has packaged discs.

  Can I safely delete this file called windows.old (assuming that I can always go back to windows 7)? Do you think this has nothing to do with the problem? Or should I do what ppl do upgrades mean that they have to do... Reinstall win 7?
  * He let me use F8 for advanced options to disable the driver signature.

  Thank you! Got the product key problem is resolved. I saw on another post, you stated

  
  "The start menu with EasyBCD by NeoSmart Technologies edition should solve your problem, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new window manager.

  http://NeoSmart.NET/DL.php?id=1   "

  Now that address my other question as much as me have allowed difficulty delivers windows boot is seen? I see that windows 7 is a file boot.ini as previous versions of windows. I would like to see the "command-line" some win 7 has instead of boot.ini file uses. I suspect something may be there that causes the driver signature error... and tried the 'bootrec' methods above doesn't solve anything for me.

  Thanks a lot for your help in this matter. (Once I get the verify signature driver disabled it goes straight in win 7 and win 7 works fine.) It just will not be disabled whenever I start my pc. I always have to fight to get the window that gives me the ability to disable.)

• Windows cannot verify the digital signature for the drivers required for this device

  I get this error from a specialized device that uses a usb/network card connection built-in.  It is with windows 7 Home premium.  Now I know that the source of the driver.  It is the latest driver and labeled for use with Vista.  I need to override this security check, so I can use this equipment.  It is an integral part with me a living. It is likely absolutrly nothing wrong with the driver.  I downloaded from many sites without modification.  This equipment worked well under Vista.

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I found the answer by looking for other sites, it's probably here somewhere as well.  Restart the computer.  During restart, press "F8".  Select Disable Driver Signature Enforcement in the start menu.  This fixed the problem of driver in my case.

• Whith USB Device error: "Windows cannot verify the digital signature for the drivers required for this device...". (Code 52) »

  Original title: open usb drivers problem

  My Dell laptop stops working with USB storage drivers. The removable driver icon is displayed in the devices window and printers with a yellow triangle around!
  I've tried different USB drivers and the problem persists. I tried troubleshooting, and it does not help.
  In the Properties window, I get the following message:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  I don't remember making any hardware/software changes and do not know how to solve the problem.

  You are welcome.

  Something seems not quite right so contact the store can be a good idea.

  Back to the initial problem as I understand it, is that when you insert an external drive, you get the error 'code 52?