The visible part of a SINGLE line of overprinting?

Similar Questions

• How to change the background color of a single line

  Hi, OTN,.
  
  I use JDeveloper with ADF faces 11.1.1.2 in the view layer. My question is how to change the background color of a single line in af:table?.

  Hi idir Mitra
  You can use EL to bind column for example inlineStyle (#{row.id == null?' background-color: rgb (255,214,165);':'background-color:red'})})

  Cordially Abhilash.S

• convert the column values to a single line...

  I have to return the column values to a single line separated by commas.
  If the nulls in the column just ignore without a comma.
  Here is one for example. There are three values and two NULL values in the table
  

  SQL> select ID from temp_fa;
  ID
  -----
  
           1
           2
  
           3
  
           5
  
  6 rows selected.
  
  
  I am expecting an output as 1,2,3,5

  Help, please

  There is always more than one title in the Oracle world ;)
  You can use the TRIM, for example (same configuration as your example):

  hoek&XE>  create table t as select level col  from dual connect by level <= 6;
  
  Tabel is aangemaakt.
  
  hoek&XE> update t set col = null where col in (1,3,5);
  
  3 rijen zijn bijgewerkt.
  
  hoek&XE> select * from t;
  
         COL
  ----------
  
           2
  
           4
  
           6
  
  6 rijen zijn geselecteerd.
  
  hoek&XE> select ltrim(sys_connect_by_path(col, ','), ',') output
    2  from  ( select col
    3          ,      row_number() over (order by col) rn
    4          from   t
    5        )
    6  where connect_by_isleaf=1
    7  start with rn=1
    8  connect by rn = prior rn+1;
  
  OUTPUT
  -------------------------------------------------------------------------------------------------------------
  2,4,6,,,
  
  1 rij is geselecteerd.
  
  hoek&XE> select trim ( both ',' from sys_connect_by_path(col, ',')) output
    2  from  ( select col
    3          ,      row_number() over (order by col) rn
    4          from   t
    5        )
    6  where connect_by_isleaf=1
    7  start with rn=1
    8  connect by rn = prior rn+1;
  
  OUTPUT
  -------------------------------------------------------------------------------------------------------------
  2,4,6
  
  1 rij is geselecteerd.
  

• All the dimension values must be single line values

  I created a Simple hierarchy with the following levels:
  
  Category
  Subcategory
  Agenda
  
  The mapping of the hierarchy above is based on a table where the column list are as follows:
  
  ITEM_KEY
  NOM_ELEMENT
  BRAND_KEY
  BRAND_NAME
  CATEGORY_KEY
  CATEGORY_NAME
  SUBCATEGORY_KEY
  SUBCATEGORY_NAME
  
  
  Item_key is the primary key for this table and nom_element is also unique.
  
  When I maintain this dimension, the following error occurs:
  
  
  An error occurred on the server
  Class of error: failure of the Express
  Server error descriptions:
  INI: Error creating a generic Manager definition to < BuildProcess > TxsOqConnection::generic
  INI: XOQ-01600: OLAP DML error "all dimension values must be single line values." while executing DML 'SYS. AWXML! R11_COMPILE_ATTRIBUTES('ITEM.) DIMENSION') ', generic for TxsOqStdFormCommand::execute '.
  
  at oracle.olapi.data.source.DataProvider.callGeneric (unknown Source)
  at oracle.olapi.data.source.DataProvider.callGeneric (unknown Source)
  at oracle.olapi.data.source.DataProvider.executeBuild (unknown Source)
  to oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$ 1.construct (unknown Source)
  to oracle.olap.awm.ui.SwingWorker$ 2.run (unknown Source)
  at java.lang.Thread.run(Thread.java:595)

  The essential error is "all the dimension values must be unique row values", which means that the server tries to create a dimension of AW member containing a newline character. The error occurs under the SYS. AWXML! Procedure R11_COMPILE_ATTRIBUTES, which is where the attributes are indexed (i.e. transformed into dimension members). If my guess is that one of your attributes (likely mapped to a column _NAME) contains a new line.   The solution is to disable the indexing for that attribute.   In terms of AWM you must make sure the following boxes are not activated in the "Général" pane

• Create the views level attribute columns
  
• Index

• How to recover the visible part of a graph?

  Hello

  Is it possible to retrieve the data associated with the currently visible Graph/chart section when a user has zoomed to the trace.

  Concerning

  Chris

  Chris,

  When you use a chart, you can use the event structure to implement the event 'range of scale change. It is created once the user zooms in or out.

  The event allows you to access the new settings range (min/max value x for example) that allows you to create a 'extract dataset"corresponding exactly to the visible area of the chart.

  Shane is, I do not see a benefit of this except the user must limit the dataset before the Save to disk... BUT: what do you do if the user zooms in too?

  Norbert

• Join the various documents on a single line

  Hello
  
  How to unite into a single line a result with more than one record?
  
  That is to say:

  cod_prod     tax     tax_name     value
  1          1     tax1          5
  1          2     tax2          10
  1          3     tax3          8
  2          1     tax1          3
  2          2     tax2          6
  3          1     tax1          6
  4          1     tax1          7
  4          2     tax2          12
  4          3     tax3          6
  4          4     tax4          9

  Back to this:

  cod_prod     tax     tax_name     value     cod_prod     tax     tax_name     value          cod_prod     tax     tax_name     value     cod_prod     tax     tax_name     value
  1          1     tax1          5     1          2     tax2          10          1          3     tax3          8
  2          1     tax1          3     2          2     tax2          6
  3          1     tax1          6
  4          1     tax1          7     4          2     tax2          12          4          3     tax3          6     4          4     tax4          9

  -Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
  -OEL 2.6.32 - 100.0.19.el5

  Use 'pivot' which is available in oracle 11g

• Live the legends 'crushing' on a single line?

  Hello

  OK-I use the live caption feature and I placed a few lines of copy in the region of Descriptions of Photoshop files. When I choose this option in my configuration of legends and then run the living legends, all words crashing on one line?

  There is nothing weird about the follow-up and all the descriptions that was originally a fine line.

  Any thoughts there?

  Thank you!
  Babs

  Do not coil the live legend. It's simply the way they work.

  Convert the text caption.

  Bob

• Why does the race partly disappear when I line up outside?

  Hello

  I have a simple rectangle with a gradient, and a race of 1 point.  There are two strange things going that I can't understand: I can't change the weight of the race to 0,5, at least I have change the race to line up outside or inside.  The problem is that when I change the line to align to center align on outside or inside, appeas to race for pushing left and down the path to the large and completely disappears on the low left side.

  Any suggestions would be greatly appreciated.

  Thank you

  Paul

  1. what version do you use? Maybe CS5

  2. what type of document is it? Maybe a web document?

  3. If so, it may be the "Snap to grid of pixels" option turned on (he died in the transformation Panel)

• BitmapData.draw is not rendered content outside of the visible part of the canvas

  My application has a canvas with a bunch of items to this topic and who has a scroll bar to see the entire contents of it, i.e. the canvas has a height of 200px, but objects in extend beyond the 200px all the way to 400px. When I pass this canvas object to my BitmapData instance which I created with a height of 400px, the result is that I get a 400px image, but only the top 200px are actually rendered. If I move the scroll bar down and you call the draw, I get the background of the canvas, rendered 200px on half superior of the BitmapData.

  Is there a way to make all of the content of the object from the canvas and not only what is currently visible in the display window?

  Thank you

  Ruy

  It is internal, which means that it is not documented, but it should be in the rawChildren or you can access it via mx_internal.  I think that if you set the height = 400, called validateNow() and bitmapData.draw then it might work.

  You can also try setting scrollRect = null.

  FWIW, people often have a print view that connects to the same model of data.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• The most used only a single line of site Web page because of new gear at top

  I used the "Awesome" my homepage page. It was my most used sites 8 on the 2 rows of 4. After the last update, I see 4 websites because the train at the top of the page all moves down and no longer has room for 2 rows. Y at - it a setting or something I can change to get the two rows to show once again?

  This page has a complicated construction, but you can use the custom style rules to change. In particular, you can leave the miniature box grow to occupy the total space available and, if necessary or desired, to have a scroll bar.

  I have not worked entirely what rules of style make the most sense, and not sure I will have time during the day today.

  If you are interested in a complementary solution, it was mentioned several times on the forum: https://addons.mozilla.org/firefox/addon/new-tab-tools/

• How can I restrict the movement of a cursor caught in the visible part of a graph?

  When I take a cursor in a graph and getting too close to the edge left or right of the chart (in a movement of the x axis), the displayed graph pans to the right or to the left of the graphics window. Is there a setting to delete this or I have to programmatically delete? And if so, how? Wouldn't I need a filter event ' cursor move?

  -Franz

  Is

  Right click > Advanced > graphics Scroll cursors

  Unchecked?

  Ben

  

• Text single line with background Image field

  Hello

  I have the following requirement for a small number of topics on BasicEditField, but I couldn't find answers to my requirement, so post to the same

  My requirement

  1 must be the only editor of line text field with a width and a predefined height.

  2. If a background Image(For better look-rounded edge image like in Broswer)

  3. If the number of characters exceeds the single line, it has scroll horizontally right and from characters to scroll left with the appropriate property of the ellipse.

  4. in entering an Enter key (Center of select navigation Keys), it should call my method to perform an action.

  Enjoy a quick help on this

  Thanks in advance

  Q1. BasicEditField.NO_NEWLINE will stop people pressing enter and get a new line.

  Regarding your second question, I recommend that you check out the two videos on screens and area managers.

  As a general rule, a field is laid out (i.e. tells his manager what size he needs and then this rectangle is placed), then painted.  Exhibitor is managed by managers and put sublayout on the page for the fields.  The more important than sublayout and put thing in page do is specify the scope (width and height) they need, which fiddles and managers to make using the measure.

  Once all fields was laid out, then the visible parts of each field are painted using paint.  I've never used subpaint.

  I hope this helps.

• How to set up single-line message headers?

  Previously, in the message display area, I had configured Thunderbird so that a message appears that the subject of the message in the message header section just above the body of the message. But I just upgraded to to 38.1.0 and now I have in reserve, [address], in the header box, although I've seen-> headers-> Normal (Compact) set.

  Please tell us how to get back to the option just to display the subject line. Real estate vertical display is much too precious to not having the capacity of the old view of a single line.

  Thank you
  [email protected]

  Install this add on.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/compactheader/?src=HP-DL-featured

  The normal headers view removes the routing information only. It has nothing to do with what you are trying to accomplish.

• I would like to organize my toolbars to fit on a single line

  I have so many toolbars, some are really short and I wish I could move them if the courts fit on a single line.

  You are welcome.

  Please click the button of resolved next to the answer that solved your problem of Firefox support, when you are connected.

• All dimension values must be single line values

  Hi all
  
  I have a dimension long_description attribute mapped to a column of text that contains a character "/ n". When I try to load dimension I get following error.
  
  
  An error occurred on the server
  Class of error: failure of the Express
  Server error descriptions:
  INI: error creating a generic Manager definition to < BuildProcess > TxsOqConnection::generic
  INI: XOQ-01600: OLAP DML error "ORA-34052: all the dimension values must be single line values." while executing DML 'SYS. AWXML! R11_COMPILE_ATTRIBUTES('TEST.) DIMENSION') ', generic for TxsOqStdFormCommand::execute '.
  
  If I delete the mapping between my column of text in the description attribute long size loads very well.
  
  It was happening because my text column contains several lines? text seems valid for reporting purposes (I mean having several lines)
  
  Thank you
  Dietsch.

  Analytic workspace dimensions do not support dimension members that contain new lines. This assumption is so integrated in language OLAP DML that it is difficult to see how it could ever be changed. Therefore, you cannot map a level (or hierarchy) key to a column that contains values to the new lines. But in your case you map an attribute, not a level key, so the error message is confusing. The problem is that your long description attribute is "indexed", which means that it is implemented using a DIMENSION and a RELATIONSHIP rather than a VARIABLE. To illustrate, I created a dimension named TEST with two levels, A and B, and one attribute, LONG_DESCRIPTION. The page of an attribute in AWM has two check boxes 'Create columns in views level attribute' and 'Index' that control how the attribute is being implemented.

  This is what is created in the AW if both are false.

  ->listnames like '%TEST%LONG%'
     1 VARIABLE
     ---------------------
     TEST_LONG_DESCRIPTION
  

  This is what is created if "Index" is checked.

  ->listnames like '%TEST%LONG%'
     1 DIMENSION                    1 VARIABLE
     ----------------------------   ----------------------------
     TEST_LONG_DESCRIPTION_INDEX    TEST_LONG_DESCRIPTION_STORED
  
     1 RELATION
     ----------------------------
     TEST_LONG_DESCRIPTION
  

  And here's what you get if you check "create columns for the level attribute of views."

  ->listnames like 'TEST%LONG%'
     2 DIMENSIONs                     3 VARIABLEs
     ------------------------------   ------------------------------
     TEST_A_LONG_DESCRIPTION_INDEX    TEST_A_LONG_DESCRIPTION_STORED
     TEST_B_LONG_DESCRIPTION_INDEX    TEST_B_LONG_DESCRIPTION_STORED
                                      TEST_LONG_DESCRIPTION
  
     6 RELATIONs
     ------------------------------
     TEST_A_LONG_DESCRIPTION
     TEST_A_LONG_DESCRIPTION_HIER_U
     TEST_A_LONG_DESCRIPTION_UNIQUE
     TEST_B_LONG_DESCRIPTION
     TEST_B_LONG_DESCRIPTION_HIER_U
     TEST_B_LONG_DESCRIPTION_UNIQUE
  

  The thing to note is that if you check one of these boxes, then your attribute is implemented by using a dimension of AW and AW relationship. This gives a good performance, but imposes the limitation that your attribute values cannot contain newlines. The obvious solution is to uncheck both boxes so that your attribute is implemented as a VARIABLE. If you absolutely have indexed attributes, so I guess you can use the SQL REPLACE function to change the new lines in escaped to the mapping layer

  GLOBAL > select REPLACE('a
    2  b', '
    3  ',
    4  '\n')
    5* from dual
  /
  
  REPL
  ----
  a\nb
  
  GLOBAL > select REPLACE('a\nb', '\n','
    2  ')
    3* from dual
  /
  
  REP
  ---
  a
  b
  

  You must convert the escape sequence in a new line endangered.