The Web Services API documentation?

Similar Questions

• Access to the Web Service API

  Hello

  I try to access a web page API in the APEX, but still get an error in the ACL.  I tried everything I can think of as well as the multitude of usual information "bits and pieces", which I found on the web.

  USER who needs access to the ACL and the fact that it is an https site makes a difference for settings?

  I can return data from SqlPlus without problem.

  FOR INFO.

  Oracle 11g

  APEX 5

  W2008.

  Pointers would be appreciated!

  Thank you

  Hi Samuistu,

  Samuistu wrote:

  Basically, what I want to do is to download data in a table to a Web site.  A good example of the type of data is here https://www.cryptopia.co.nz/api/GetCurrencies

  Is it possible to get this data into a table that contains the Id column headers, name, etc. of symbol.

  Assuming that you have a table as follows:

  create table crypt_currencies (
    id number,
    name varchar2(128),
    symbol varchar2(8),
    algorithm varchar2(128)
  );
  

  Finally with regard to the features to get the web service data and insert them in the table, for that you can do something like this:

  declare 
  
      l_response clob;
      l_values apex_json.t_values;
      l_data_count integer;
      l_crypt_curr_rec crypt_currencies%rowtype;
  
  begin 
  
      l_response := apex_web_service.make_rest_request (
                          p_url          => 'https://www.cryptopia.co.nz/api/GetCurrencies',
                          p_http_method  => 'GET',
                          p_wallet_path  => 'file:path/to/oracle/wallet',
                          p_wallet_pwd  => 'password' );
  
      apex_json.parse (
          p_values => l_values,
          p_source => l_response );
  
      if apex_json.get_boolean (
            p_values => l_values,
            p_path  => 'Success' ) then
          dbms_output.put_line('Success --> true');
      end if;
  
      dbms_output.put_line ( 'Data Members Count --> '||
                              apex_json.get_count (
                                  p_values => l_values,
                                  p_path  => 'Data' )
                            );
  
      l_data_count := apex_json.get_count (
                          p_values => l_values,
                          p_path  => 'Data' );
  
      for i in 1 .. l_data_count loop
  
          l_crypt_curr_rec := null;
  
          dbms_output.put_line ( 'Id --> '||
                              apex_json.get_number (
                                  p_values => l_values,
                                  p_path  => 'Data[%d].Id',
                                  p0      => i )
                              ||', '||
                              'Name --> '||
                              apex_json.get_varchar2 (
                                  p_values => l_values,
                                  p_path  => 'Data[%d].Name',
                                  p0      => i )
                              ||', '||
                              'Symbol --> '||
                              apex_json.get_varchar2 (
                                  p_values => l_values,
                                  p_path  => 'Data[%d].Symbol',
                                  p0      => i )
                              ||', '||
                              'Algorithm --> '||
                              apex_json.get_varchar2 (
                                  p_values => l_values,
                                  p_path  => 'Data[%d].Algorithm',
                                  p0      => i )
                            );
  
          l_crypt_curr_rec.id := apex_json.get_number (
                                    p_values => l_values,
                                    p_path  => 'Data[%d].Id',
                                    p0      => i );
  
          l_crypt_curr_rec.name := apex_json.get_varchar2 (
                                    p_values => l_values,
                                    p_path  => 'Data[%d].Name',
                                    p0      => i );
  
          l_crypt_curr_rec.symbol := apex_json.get_varchar2 (
                                    p_values => l_values,
                                    p_path  => 'Data[%d].Symbol',
                                    p0      => i );
  
          l_crypt_curr_rec.algorithm := apex_json.get_varchar2 (
                                    p_values => l_values,
                                    p_path  => 'Data[%d].Algorithm',
                                    p0      => i );
  
          insert into crypt_currencies
              values l_crypt_curr_rec;
  
      end loop;
  
  end;
  

  NOTE:

  • The code above is for purposes of example, if you use it make the necessary changes.
  • Dbms_output calls are given for the purpose of debugging. You can remove that in the actual code.

  I hope this helps!

  Kind regards

  Kiran

• Problem running the report with the Web Service and BI Publisher

  Hello
  
  In fact, I'm trying to run a report of Bi Publisher via the Web Service.
  I use the following documents:
  -http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10416/bip_webservice_101331.htm
  -"How to integrate Oracle BI Publisher via Web Services in the form of Oracke.
  
  Everything works fine. But when I try to copy the file on the local computer is 0 length. I use the method of "getReportBytes".
  Here's the code I tried with:
  
  String userName = "Administrator";
  String password = "Administrator";
  
  System.out.println ("calling" + myPort.getEndpoint ());
  System.out.println (myPort.validateLogin (username, Password));
  
  ReportRequest repReq = new ReportRequest();
  RepRes ReportResponse = new ReportResponse();
  
  repReq.setAttributeFormat ("pdf");
  repReq.setAttributeLocale("en-US");
  repReq.setAttributeTemplate ("sales world");
  repReq.setReportAbsolutePath ("/ Sales Manager/World Sales/World Sales.xdo");
  
  repRes = myPort.runReport (repReq, userName, passWord);
  System.out.println (repRes.getReportContentType ());
  
  Byte [] binaryBytes = repRes.getReportBytes ();
  OutputStream out = new FileOutputStream ("D:
  out.pdf");
  out. Write (binaryBytes);
  out. Close();
  System.out.println ("success for performance report');
  
  Thanks in advance.

  Hello

  I assume you are using 10.1.3.4. Otherwise, my index is not relevant to you...

  There is a new parameter in the web service API to set the size of the segment. HéLas is by default not so, the behavior is as in versions (not size segment... the entire document at once). If you set the size of segment-1, you should get your document. So, try adding
  repRequest.setSizeOfDataChunkDownload(-1);

  concerning
  Rainer

• BlackBerry Web Services API 10.1.3 migration

  Hi, we have a few developed internal tools that use old BES Web Services (5.0.3 / 6.2) to perform a device admin now measures via custom web pages and we will need to update these to use the new (10.1.3) web services API to perform the management of BlackBerry devices.

  Someone there done this before and don't know no easy upgrade path? Is a complete rewrite of all of our code that refers to the API, or is it an easy to follow upgrade path?

  Thank you

  John

  Hi John,.

  This should be confirmed without any code changes, BWS was written for forwards and even some backward compatibility. Just make sure you keep the version of BWS used to create the application in the METADATA of your app, in this way, the server can better understand the calls.

  If you want to add new features added to the 10.1, then you will need to re - generate proxy files, but even then your code should not continue to operate many changes.

• several images capture and read their path to send the byte array to the web service

  Hello

  Have a problem when the image capture, the requirement is to open the camera and capture multiple images, and once done it should send the array of bytes to the web service, wrote the class with reader and Video Control of the code and then using the saved file to store image API, but when the user capture multiple images it replaces previous if I keep the path to say dynamic by using the date and time then how I just know what images are recently captured and their path, one time I know that the path of recently captured using new fileconnection images can read the image byte array.

  Hi Nishant,

  find the attached code. In this demo, you will find:

  (1) the use of the listner log file system

  (2) how to move data from one folder to another.

  (3) how to read file system byteArray.

• Another possibility to communicate with the web service other than the SOAPS in Adobe Reader

  Hi team

  It is another alternative method to communicate with the web service other than the SOAPS using Java script in Adobe Reader.

  Thank you

  Bala

  Yes, you can use FDF/XFDF to send data to the server and report information in the document. Take a look at the Doc.submitForm () method using the FDF/XFDF parameter: DC-Acrobat SDK Documentation - Doc.submitForm () you'll need fields for send/receive form data, but these can be hidden.

• Problem of DH handshake with the web service using ColdFusion 7 and 8 after java update 8

  ColdFusion 7 and 8 are provided with a variant of JRE1.6.

  I have a script that has consumed a web service for years with success.  Last week, the web service provider updated their version of Apache and Java on the server java 1.8 (or java-8).

  I could no longer consume the web service once the web service provider updated to Apache and Java and would be the following error DH keypair every time that I try to consume the service:

  -----------------

  AxisFault

  faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException

  faultSubcode:

  faultString: javax.net.ssl.SSLException: java.lang.RuntimeException: could not generate keypairs DH

  faultActor:

  faultNode:

  faultDetail:

  {}http://xml.apache.org/axis/} stackTrace:javax .net .ssl .SSLException: java.lang.RuntimeException: could not generate keypairs DH

  at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:190)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1591)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1554)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1537)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1130)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1107)

  at org.apache.axis.components.net.JSSESocketFactory.create(JSSESocketFactory.java:186)

  to org.apache.axis.transport.http.HTTPSender.getSocket (HTT... ''

  -----------------

  I asked the service provider web, why it would stop working and how we can solve this problem.  They suggested that upgrade to the latest version of Java on my server running ColdFusion.  I did some research and found the problem to be with the amount of memory allocated to the variable containing the encryption key.

  The big problem is when I tried to update java on this particular server (Windows Server 2003), the installation has returned a messaged stating that he could not run on the older operating system and I need to update my OS to install java.

  Does anyone have a workaround in ColdFusion 7 or 8 that you can establish the DH handshake using Java 1.6 on your local server while consuming a web service on a server using Java 1.8?

  Hi, frank000000,

  I know that we had a serious problem with any Java 7 after update 25.  They are off a lot of network permissions and other things, for safety, that used to be available in versions prior to the update 25.  But it's while we were in CF Server 9.

  Since we switched to CF Server 10 (making sure that we got the CF Installer provided with Java 8), we had very few issues related to Java.

  It seems strange to me that the upgrade to 1.8 host while your server is 1.6 would cause problems.  It could very well be something else.  I would like to ask the host for documentation describing exactly how/why their 1.8 may cause interference with your 1.6.

  HTH,

  ^_^

• How to get out of scheduled using web service api report

  Hello

  By using the api service report I can run the report query and get the result and save it in a file. But as I'm under the report directly I don't see report running history in BIP UI. (Or there is a way to do what I don't know.)

  So I create a task report and the request for a change it and then call using the api planning service and it works properly gives me a return identification work and I see the history for a job at the BIP UI.

  But I can't find a api that gives me the result of this work.

  All of the suggestions.

  I use eclipse, cfx to generate stubs, and it's a simple java program with access to the web service

  Obtained, he works as below.

  1. Call scheduleReport on SchedulerService to schedule a report and get the scheduled_job_id.
  2. Call getAllScheduledReportHistory on SchedulerService using scheduled_job_id to get the work history that includes the work of the child created by the Scheduler for above child_job_id scheduled_job_id.
  3. Call getScheduledJobInfo on SchedulerService using child_job_id to check whether the job has finished if it is wait for a while, then try again until the work is either successful or failed. The api returns object JobDetails
  4. If the job is successful then check if xmlDataIsAviable for the above job details. If Yes, then call getXMLData on SchedulerService using child_job_id which gives a byte array, write this array of bytes on the disk using the java.io library
  5. Call getScheduledReportOutputInfo on SchedulerService using child_job_id for the information of reportOutput, which is a list of cases
     more than one output format is specified in the report definition to the bi pub. Scan the list for the output_id for the data to the desired output format.
  6. Call getDocumentData on SchedulerService using the output_id above, which gives an array of bytes of report data, and save it using the java.io library

  If you want to avoid voting in step 3 you can configure a httpserver in bi publiher, which is basically a servlet url of a Web application deployed on a server

  Select	Server Name	URL	Default	Delete
  	BiPubReportsWebApp	http://hostname:PortName/webappnameWebApp/servleturi

  and when planning the report in step 1, you can specify these options in the ScheduleRequest element

  scheduleRequest.setNotificationServer (notificationHttpServerName) / /notificationHttpServerName = BiPubReportsWebApp

  scheduleRequest.setNotifyHttpWhenFailed (true);

  scheduleRequest.setNotifyHttpWhenSkipped (true);

  scheduleRequest.setNotifyHttpWhenSuccess (true);

  scheduleRequest.setNotifyHttpWhenWarning (true);

  So when the work is done bi publisher will make a post to you request httpservlet with jobid, reporturl, jobstatus, so you can use this jobid (which corresponds to the id of child labour) to perform steps 4 and following

  Another thing to note is step 6 gives the byte array return which may be huge in big reports and you can go outofmemeory in this case

  (1) request to the server to save the xml data and output on the server and returns the path where these files have been saved by using downloadXMLData and downloadDocumentData to the SchedulerService, and then tokensize the string to get the last piece

  (2) call downloadReportDataChunk of the report (in a loop) service to get the data for the xml data and the document into segments giving him the name of the file in step 1, a start index and chunksize

  While (offset! = - 1) {}

  LOG.debug ("Getting chunck number :->" + counter + "index :->" + beginIdx);

  ReportDataChunk reportDataChunk = getReportDataChunks (tmpFileNameOnServer, beginIdx, util.chunkSize);

  data = reportDataChunk.getReportDataChunk ();

  output. Write (Data);

  beginIdx = beginIdx + util.chunkSize;

  offset = reportDataChunk.getReportDataOffset ();

  counter ++;

  }

  public ReportDataChunk (String starts, int beginIdx, int size) getReportDataChunks survey com.oracle.xmlns.oxp.service.v2.reportservice.OperationFailedException_Exception,

  {com Oracle.xmlns.OXP.service.v2.ReportService.AccessDeniedException_Exception}

  ReportDataChunk reportDataChunk is getReportServicePort () .downloadReportDataChunk (starts, beginIdx, size, getUsername(), getPassword());.

  Return reportDataChunk;

  }

  Note: when you schedule a report using schedulereport pub bi api back you a job id but matching so that it creates a Collard work with a different id that does the job and this childjobid is given when using the method of notification httpserver.

• How to access the web service from Oracle?

  Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
  
  I'm making a call to a web service through a procedure/function...
  
  I tried to use
  

  CREATE OR REPLACE PROCEDURE Call_Rest_Webservice
  
   AS
  
    t_Http_Req Utl_Http.Req;
  
    t_Http_Resp Utl_Http.Resp;
  
    t_Request_Body VARCHAR2(30000);
  
    t_Respond VARCHAR2(30000);
  
    t_Start_Pos INTEGER := 1;
  
    t_Output VARCHAR2(2000);
  
  BEGIN
  
    /*Construct the information you want to send to the webservice.
    
    Normally this would be in a xml structure. But for a REST-
    
    webservice this is not mandatory. The webservice i needed to
    
    call excepts plain test.*/
  
    t_Request_Body := 'the data you want to send to the webservice';
  
    /*Telling Oracle where the webservice can be found, what kind of request is made
    
    and the version of the HTTP*/
  
    t_Http_Req := Utl_Http.Begin_Request('**webservice address**',
                                         'GET',
                                         'HTTP/1.1');
  
    /*In my case the webservice used authentication with a username an password
    
    that was provided to me. You can skip this line if it's a public webservice.*/
  
    --Utl_Http.Set_Authentication(t_Http_Req, 'username', 'password');
  
    /*Describe in the request-header what kind of data is send*/
  
    Utl_Http.Set_Header(t_Http_Req, 'Content-Type', 'text/xml charset=UTF-8');
  
    /*Describe in the request-header the lengt of the data*/
  
    Utl_Http.Set_Header(t_Http_Req, 'Content-Length', Length(t_Request_Body));
  
    /*Put the data in de body of the request*/
  
    Utl_Http.Write_Text(t_Http_Req, t_Request_Body);
  
    /*make the actual request to the webservice en catch the responce in a
    
    variable*/
  
    t_Http_Resp := Utl_Http.Get_Response(t_Http_Req);
  
    /*Read the body of the response, so you can find out if the information was
    
      received ok by the webservice.
    
      Go to the documentation of the webservice for what kind of responce you
    
      should expect. In my case it was:
    
      <responce>
    
        <status>ok</status>
    
      </responce>
    
    */
  
    Utl_Http.Read_Text(t_Http_Resp, t_Respond);
  
    /*Some closing?1 Releasing some memory, i think....*/
  
    Utl_Http.End_Response(t_Http_Resp);
  
  END;

  But it's me ORA-29272: HTTP request failed
  ORA-06512: at "SYS." UTL_HTTP", line 1029
  ORA-12545: Connect failed because target host or object does not exist
  
  But I can connect to the web server by going on * webservice address * through my browser.
  
  Is there an ACL must be open in order to have this capacity? I asked my s/n, but she asked me that I will need to give its name to username/password / ip in order to open an ACL...
  However there is no name to username/password required during a tour of the web service...
  
  Any help would be much appreciated...
  
  Thank you
  
  Published by: 986006 on March 4, 2013 08:38

  Y.L wrote:

  This is because the database could not connect to the specified server. Bad host name or IP address specified. Inability to resolve the hostname to an IP address. Firewall blocking. Etc.

  The host name, I put here can be visit through my browser. I think that it is not question of the host server... So, it could be a firewall on my side of the database which must be opened in order to visit the host?

  The "web browser" (your PL/SQL using UTL_HTTP code) code is running on the Oracle database server. He needs the same type of network access that has your browser on your PC. (firewalls open, authentication of the proxy if necessary, etc.).

  On 11g. Not on 10g.

  I saw the code example you post from the link you provided... those who only works on 11 g?
  If we can work on 10g, which package or what are the steps I need to follow in order to have that works on me?

  The code I posted works on both versions. My comment was regards the ACLs. No ACLs exist on 10g. If you only need to execute privs on the affected packages (e.g., UTL_HTTP, etc.).

  ACL were introduced with 11g - 11g, you also need the ADMINISTRATOR to create an ACL for you which will allow access to the UTL_HTTP network so now.

• air application connects to the web service although swf don't

  Hey there,

  I will try and be brief. We built a kiosk application in flash builder a pure as3 project. When we went to convert it into an air application all seems fine except for two issues. one is that we cannot use the Security.allowDomain("*"); Tagus. not much we comment on this possibility, but when we do we cannot connect to the web service that we use. Here is the error msg that we get:

  URL http://api.macys.com/v2/catalog/product?prodid=559529 & prodid = 586262 & prodid = 442702 & prodid = 5 39030 & prodid = 444331 & prodid = 593389 & prodid = 102435 & prodid = 519743 & prodid = 357571 & prodid = 128285 & prodid = 407708 & prodid = 209799 & prodid = 417917 & prodid = 498705 & prodid = 131858 & prodid = 597478 & prodid = 142166 & prodid = 470687 & prodid = 584020 & prodid = 167015 & prodid = 75190 & prodid = 432111 & prodid = 481224 & prodid = 549755 & prodid = 483429 & prodid = 414178 & prodid = 596422 & prodid = 385591 & prodid = 226280 & d = 142163 prodi

  ioErrorHandler: errorProductId: WebApplicationException

  ioErrorHandler: currentTarget: Error #2032: error in workflow. URL: http://api.macys.com/v2/catalog/product?prodid=559529 & prodid = 586262 & prodid = 442702 & prodid = 5 39030 & prodid = 444331 & prodid = 593389 & prodid = 102435 & prodid = 519743 & prodid = 357571 & prodid = 128285 & prodid = 407708 & prodid = 209799 & prodid = 417917 & prodid = 498705 & prodid = 131858 & prodid = 597478 & prodid = 142166 & prodid = 470687 & prodid = 584020 & prodid = 167015 & prodid = 75190 & prodid = 432111 & prodid = 481224 & prodid = 549755 & prodid =. 483429 & prodid = 414178 & prodid = 596422 & prodid = 385591 & prodid = 226280 & d = 142163 prodi

  Here is the error of charles:

  < error >

  < > 103 errorCode < / errorCode >

  types of arguments < message > Incorrect or combination < / message >

  < errorDetail > WebApplicationException() < / errorDetail >

  false < success > < / success >

  < / error >

  now, if we run just the swf file it connects very well. the only reason I need this app to be in a wrapper of the air is so that I can remove the print dialog box. otherwise, I'd create just an exe file.

  any ideas would be great!

  Thank you

  OK, found the problem!

  When we built the as3 project and we implement web service calls, we used post from get we caused problems. We have been connecting to a service of qa so that may have something to do with it. In all cases, we have changed the headers in the air application to get and it seems to work fine. Why would he works in the SWF and not the air who knows, but there are go!

  Thank you

  Jorge

• How to display a PNG image according to the response from the Web Service?

  Hello

  I use the web service XML from Weather.com to get the current temperature, temperature 'feels' and the current condition icon number.  Their service provides many (> 20 I think) which represents the current status of PNG files.  How do I install my script AS3 do basically if... then Else instructions based on the returned value icon?  For example, if the value of icon = 20, then view 20. png on stage?  I need match the value of correct PNG icon and then put that PNG (as a clip?) on stage for a predefined timeline section.

  Thank you

  SID

  Hello

  I also used this API, and I only use cases or conditions in order to retrieve the values and turn them into a file name.

  If you do not use all the available conditions and turning them into an icon, then Yes, you need to do a switch condition.

  But if you want to use them all, them you can simply get the condition number and add the '.png' and call the corresponding file directly. Here you can do a test, just in case the condition / icon does not exist (e.g. system failure any)

  uicondition.source = String (resultXML.cc.icon) + ".png";

  The UILoader is an excellent component for this sort of thing. You can accomplish the same thing with a MovieClip and load an image. It is lighter.

  But then again if you want to resize you would code all methods for that.

  I hope this helps.

• How long the ORACLE would continue to support the Web Service 1.0

  Hello
  
  As mentioned in the subject, ORACLE has not yet communicate on this point. If possible, we would really appriciate to know this, because it will be an important for our planning of dev argument.
  
  Thank you very much in advance.
  
  Fang

  Fang,

  For now, there's no intend to belittle the existing API. We have a huge customer base that has built integrations using the basic API v1.0. The API v2.0 adds to the overall functionality of the Web Services interface and works in conjunction with the v1.0, you can create integrations that contain wsdl v1.0 and v2.0 files.

  Jaya

• How can I fnd my claim code and the reprint of the web services information sheet

  Hi, I have a HP Deskjet 3520 and try to put in place the eprint.  I read the suggestions on the forum and the FAQ but I can't locate the web services information sheet I need to reprint for claim code.

  Could not find anything under Printer Control Panel either. Please advise!

  Thank you!!

  Hi Chris88,

  Welcome to the HP Support forums.  I appreciate that you try to configure the ePrint on your Deskjet 3520 printer feature.

  If you have the inkjet printer Deskjet 3520 with a C8994 product number this printer does not have the ePrint service.  The Deskjet 3520 printer only has USB connection and ePrint to function the printer must have an independent internet connection through a wireless or a wired ethernet network.  I've included the specifications of the printer for your reference.

  If you have the e-all-in-one printer Deskjet 3520 then we obtain the claim code.  You can request the information sheet of web services from the front panel of the printer, and there the claim code printed in blue. Instructions on how to get it can be found in the section titled "to print a document using ePrint' in your on page 15 user's guide.  Please follow the instructions in step 1.

  HP Deskjet 3520 inkjet printer specifications

  User's Guide e-All-in-One Series HP Deskjet 3520

• Impossible to activate the web services photosmart7515

  On the web services on my printer I get

  e-mail connection error

  ePrint connection error

  Web services connection error

  What can I do?

  Hi Catjoy36,

  Thanks for the reply.  It seems that we have to take steps more.  Follow the steps below, and once you complete the steps, then you can follow the steps above.

  1. go in the front panel of your printer.

  2. Select the icon wireless on your printer.

  3. Select settings.

  4. highlight and select restore default network settings.

  5. click OK to restore default values.

  6. now, select Wireless and go through the wireless configuration wizard.

  Let me know how it goes.

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!