Impossible to activate the web services photosmart7515

Similar Questions

• OfficeJet 6500 a Plus: impossible to activate the Web services; roadblocks at all stages

  This printer is connected to my network by Ethernet. I want to activate Web services, so I can use ePrint.

  When I try to enable Web services from the printer control panel, I said that I might need to enter a proxy address. I'm not running a proxy server, but it is not possible around this prompt.

  There are posts on this Board indicating that Web services can be activated with a Wi - Fi connection. I unplugged the Ethernet cable and wireless enabled, but I was always invited address proxy information when I tried to activate the Web services. I disabled wireless and returned to Ethernet.

  A response to another post suggested updating the firmware to bypass the proxy server error. HP recommendation is to do it from the control panel of the printer. In the Panel menu control, firmware upgrade is the title of the Web services, which I can't because of the mistake of the proxy. So I downloaded the firmware and tried to install the update from my computer. The update found my printer on the network, but it is gray, saying 'Not applicable', under the State. I couldn't select it.

  In another post, someone suggested THAT DNS has been configured. I saw, through Server Web shipped by the printer, there is no configured DNS server (the printer is configured for manual IPv4). So via the integrated Web server, I tried to enter addresses (my domain controller, OpenDNS, Google) DNS server. With each of them, the SAP replied: "an error has occurred. (ipv4Page-400). Click 'OK' to go back. "There is no place to enter the DNS settings on the printer control panel.

  Web services require a Wi - Fi connection?

  Why the printer think there need a proxy address?

  The firmware update will solve the proxy error?

  I have to update the firmware, if the update statement indicates does not apply?

  What is another method for updating the firmware out of the control panel or from my computer?

  How to enter the DNS of the EWS information without getting an error?

  Jeffrey Pike

  Groton public library

  Charles:

  Thank you for taking the time to provide a complete response to my questions.

  I finally got the Web services enabled on the printer. What I had to do was enter the DNS settings in SAP to bypass the prompt for proxy information. Step I missed yesterday, when I got page not found error in the SAP, was that I had to do the secure version of the SAP ("https", not "http"), and then the EWS would accept my DNS entries. Once this is done, I went to the printer and could enable Web services without having to provide proxy information.

  The printer is now registered to hpconnect.com, and I can start letting my library to print patterns on my wireless network, that was my goal all along.

  Thanks again for your help.

  Jeffrey Pike

  Groton public library

• Impossible to activate the web services

  I have a recently purchased B110 (22/01) and it installed easily and connected to the network easily, but I can't activate web services, it comes up with "Error server connection" nothing else, I also tried to update the firmware for the printer but it comes up with same message

  

  Try these steps and check whether or not printer connects to Web Services:

  (1) turn off the wireless radio

  (2) perform to restore network defaults in the menu of the printer

  (3) turn off the printer and unplug the power cable to the rear. Wait 5 min

  (4) plug the power cable and turn on the printer

  (5) run the Wireless Setup Wizard in the printer menu.

  (6) check if you are able to print and scan

  (7) ' delete Web Services"from the menu of the printer and wait for 2 minutes

  (8) "activate Web Services" in the menu and waiting.

  This should display a page automatically.

• OfficeJet Pro 8740: Impossible to activate the web services

  I can't activate my new printer (Officejet 8740) web services.  I looked through several web pages without success.  It doesn't seem to be an option on the Billboard related to web services.  ePrint, Apps, etc., are all disabled. There are no visible icons.  What to do next?

  Hey @Ricktm56,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the activation of Web Services on your Officejet 8740 e-all-in-one printer. I can help you with that.

  To start, we need to change the setting of the printer from Commercial to consumer settings. To do this, I'll send you some directions in a private message. If you check your Inbox forum you should see a message private to me shortly.

  After resetting, please let me know if you still have problems with the activation of web services after doing the above. If you are able to install web services, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Photosmart 7525: Impossible to activate the web services

  I have a HP Photosmart 7525 and I was once able to scan to e-mail. Now it always tells me that it cannot connect to web services. I tried to troubleshoot including disabling web services and now I can not re - enable web services. Help, please!

  Hello

  Download and install the latest firmware for your printer, it is essential to maintain a Web Services connection:

  It can be installed from any Windows on the following link:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5286642/swItemId/OJ-113641-5

  Kind regards

  Shlomi

• How can I activate the web service on 8600

  How can I activate the web service on 8600

  How can I activate the web service on hp 8600

• I can't activate the web services, printer asking proxy address, ISP says no proxy

  I want to print from the ipad, iphone etc. with wireless turned on and connected. Try to activate the printer asking proxy that my ISP says that there is no proxy, web services, help with what I can do. I bought it only so that I can print from my ipad, the retailer does not know how to put in place, help please if you can

  There is another option to put in a custom DNS server. The integrated Web server for this model may be slightly different, but the following steps apply for all HP printers.

  What you want to do is to collect the IP address of the printer, you can do this by pressing the icon on the screen wireless and you will have to go to display settings after. Take this ip address and put it in the address bar of your web browser as a Web page. From there, go to the tab network along the top of this page, then you should have an option of ipv4 on the left side under wireless (or wired) If you are using ethernet. Here, you can set a manual IP address and a DNS Server Manual. Configure the DNS server to manual and put as a main 8.8.8.8 and 8.8.4.4 as secondary.

  These measures will have the printer through the servers DNS googles, which does not seem to solve this problem, most of the time. The main cause is that your ISP DNS servers may not have servers of web services in their system, so when it goes to connect it times out and gives you the message from proxy.

• OfficeJet 7310 all-in-One: activate the Web Services and printing of Tablet

  I can't find a way to enable Web Services on my 7310 all-in-One.  It is connected by wire to my internet router, and I use the built-in print server.  ePrint online information, says this printer is supported.  When I go into the ePrintCenter registration page, or when I go into the app on my Android tablet, it won't give me an option to manually enter the printer and can't find the printer on my home network.  All this suggests that I should update the firmware of the print server, but I can't find a way to do it.  Any help would be welcome.

  Ok. I found my own solution, but the documentation is really bad.

  The answer is: If you select document, it gives you the choice of the printer on the wireless network, even when not compatible eprint. But who knows? I would have thought to implement a printer first.

• Impossible to activate the audio service with error message: "cannot start the Audio window Service.Some features will be unavailable.

  Original title: how to get audio in my system that failed for an unknown reason

  Hello... In my audio system does not... If I try to open the "manage audio devices" option in the Control Panel it opens a dialog box with the content next-' this computer cannot play audio because the Windows Audio Service is not enabled. " You want to enable the Windows Audio Service? " for which I clicked 'Yes' ." Then it displays a dialog box that contains the text next-"Could not start the window Audio Service.Some features will be unavailable".
  What is the problem and what should I do now?
  -Thanks in advance

  Hi Thennisha,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?
  2. What is the brand and model of the computer?

  Please follow the steps in the link below and check off the question:

  No sound in Windows:
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Impossible to activate the services web ePrint for Color LaserJet M551

  Hello

  I read all the posts in this forum about the web services enabling ePrint to the question and tried all suggestions with no luck.

  Here's the situation:

  1. The printer works fine on place. I can print without problem.
  2. The printer is connected.
  3. All my router ports are open for outbound connections, including UDP.
  4. Communication using log in my router I can see that the printer can resolve DNS names using either my ISP DNS server or the suggested 8.8.8.8 and 8.8.4.4. Using nslookup shows ' registration-pro - site1print.houston.hp.com "Decides to 15.240.60.111 and" registration-pro - site2print.houston.hp.com "Decides to 15.201.224.79.
     This indicates that the printer can indeed resolve the addresses. Newspapers also Awakenings that the printer communicates with the servers (connection is established and data transferred) via https (probably the web service), but always after a few minutes the clearance process is to expire.
  5. I tried this allowing the procedure since a few days my believe that the recording servers should have worked some time during this period.
  6. I'm frustrated
  7. .. .even more frustrated
  8. what I am doing wrong?
  9. Help, please!

  trying to install eprint for my new M551dn Color LaserJet and it fails with the

  Who out there having the same problem I had. HP could not help me I restore to factory settings and reconfigured everything and all of a sudden the printer managed to enable web services and print the print code.

  Good luck to you face the same problem!

  / MrQQ

• problem connecting to the web services server

  I tried to download the latest updates of software/firmware for my all-in-one HP Photosmart Prem C310a.

  I can't get updates or activate Web Services because it still gives me the error message "problem connect to the web services server.

  I tried everything in the section of the Web of HPs site including connection via WPS - unsucessfully problems.

  I understand that you have found impossible to connect to the server error message on your printer. I would first disconnect the router and the printer for about 1 minute. I would plug the router first then the printer. I would then try to enable web services. If not successful, and you get the same error message. I'd follow these steps.

  1 obtain the IP address of your printer
  a. This can be done by pressing the icon on the printer wireless.
  2. Enter the printer's IP address in a browser.
  3. Select the tab network at the top of the page.
  4. on the left, select network.
  5. Select Network (IP) address
  6. select manual DNS server
  a. manual Preferred DNS should read 8.8.8.8
  b. alternate DNS server should read. 8.8.4.4
  7. Select apply you could get a fair warning select OK.

• Impossible to activate the sound function

  My hp630 not allow its service after this how can I enable

  Hi Salihi,

  What exactly happens when you try to activate the audio service?

   

  Method 1:

  You can use the troubleshooter below.

  A convenience store is an automated tool that can find and automatically fix problems with your PC. Audio troubleshooting can diagnose and troubleshoot equipment and playback of sounds common.

  Method 2:

  Update the drivers for sound card on the Web site of the manufacturer and check if it works:

  Note: If you use the 32-bit operating system, download and install the 32-bit drivers. If you use the 64-bit operating system, download and install the 64-bit drivers.

  Reference:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please post with the State of the question.

• Impossible to activate the update lightroom5 to lightroom6

  Hello

  There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.

  And when I ask to generate I have the not not request.

  So how do?

  Thanks for your reply.

  

  We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:

  • https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!