The Windows Installer Service is not accessible

I try to install Trend Internet Security from a disc. The process gets so far but stops when the message "service The Windows install could not be accessed. This can occur if you are running Windows in safe mode or the installation program is not installed correctly "can you help me?

http://eSupport.trendmicro.com/default.aspx

Problem with the Trend Micro software, contact them directly at the link above.

See you soon. Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • The Windows Installer service could not access while trying to install Skype

    They advised me to contact my support staff to verify that Windows Installer service is properly registered.  I don't know which is referenced support staff.  Help, please.

    Hello

    Follow this article troubleshooting methods to resolve the problem.

    Problems installing and uninstalling programs on Windows computers

    See also: error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible"

  • Error "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. »

    Crazy became Windows Installer

    have windows Xp Sp 3 and when I want to uninstall or install a program error message appears saying that "the Windows Installer Service could not be accessed. This can occur if you run Windows in Mode safe mode or if Windows Installer is not installed properly. Contact your support team. "and I are not in safe mode when I try to install or uninstall programs.  I checked for a virus and found that none please help because I want to uninstall some programs to free up disk space.

    Original title: Windows Installer Service could not be accessed error during installation or uninstall a program

    Hi, Honorine,.

    Follow the steps listed in the following article:

    Error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible.

    See also:

    Problems installing and uninstalling programs on Windows computers

  • I get the error message, the Windows Installer Service could not be found, is there a solution?

    I get an error message, the Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly.  Is there any solution for this?  Also I can't find service.msi.  Make sure you typed the name correctly and then try again.  Any help I can get for this will be appreiated.  System restore not working anymore.  Carolyn Stallings

    Always, always, first specify what operating system you are using before you begin to explain the problem.

    Try this tutorial. It works for Vista and Win 7.

    http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

  • try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

    try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

    Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • The Windows Installer Service could not be accessed

    Original title: I get this message: when you try to install a software like Microsoft Plus! for Windows XP or Microsoft Office 2003, Microsoft Windows XP, you may receive the following error message:

    I can't update my programs or even my anti virus...   I get the following message...

    The Windows Installer Service could not be accessed.
    This can occur if you are running Windows in safe
    mode, or if Windows Installer is not correctly
    installed. Contact your support team.
     
    How do I change to run in safe mode Windows... is it still a good thing to do?

    Hello

    Please follow the links below and check the issue:

    Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003:

    http://support.Microsoft.com/kb/315346#method3

    To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ )

    How to back up and restore the registry in Windows

    For reference:

    Error message "the Windows Installer service is not be available" when you try to install Office

    http://support.Microsoft.com/kb/324516

    To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ )

    How to back up and restore the registry in Windows

    I hope this helps.

  • My Windows Installer does not work. Msg I get: the Windows Installer Service could not be accessed.

    Can't install or uninstall I get this msg.  The Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly. Contact your support team. HELP please.

    Hello Monica and DuaneWolfe,.
     

    Thanks for posting in the Microsoft Community. I understand that the Windows Installer does not work on the computer windows vista. I also noticed that there is another thread of yours, with the same question, and the thread was answered by Yaqub K August 30, 2012.
    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    I suggest you to consult the help article mentioned in this thread and let us know the status of the issue.


    Please avoid creating threads in duplicate on the same issue. You can reply to this thread if you need help and I'll be more than happy to help you.
  • The Windows Installer Service could not be accessed. Vista Home Premium

    I can't install new programs, updates or software (for printer), without having this error:

    "The Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly. »

    I tried without success that all suggested here, including the download of Windows Installer 4.5, which gave a message that it does not apply to my computer.  I have Vista 32 bit Home Premium.

    Having the same problem I have tried most of the above steps, then decided to down load http://download.bleepingcomputer.com/win-services/vista/msiserver.reg and installed according to the instructions and Bingo, I managed to down load the file ' Kies from Samsung.

    Thanks for the help

    Pzem

  • Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

    OP: Install problems Windows

    I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

    Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

    1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

    I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

    I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

  • I try to install or uninstall programs, but a message appears and says "the Windows Installer service is not to be accessible" GOLD that the system administrator has set policies to prevent this installation

    Several times I tried to install itunes but a message pops up saying

    • Windows install is not properly installed and

    I also try to uninstall programs and whenever it says the system administrator has set policies to prevent this installation, but I've changed my settings so that I can be the administrator

    • the windows service install could not be accessed
    Hello
     
    You may encounter this error message when the Windows Installer files on the system are missing or damaged.
    You can resolve the error by using the methods mentioned below:
     
    Method 1: Start the Windows Installer service
     
    a. Click Start, type "Services.msc" and press {ENTER}
    b. double-click Windows Installer
    c. the value of the Windows Installer Manual startup type
    d. Click Start to start the service. Note the error message, if any.
    e. click OK.
     
    Method 2: Unsubscribe and re - register the Windows Installer
     
    a. Click Start, click Run, type "MSIEXEC /Unregister." and then click OK. Even if you do it right, it may seem that nothing is happening.
    b. Click Start, run, type "MSIEXEC/REGSERVER" and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass.
    After you run this command, the operation is complete.
    c. try your application based on Windows Installer again.
     
    Method 3: Scan SFC
     
    Perform a scan of the SFC to check if this is related to the missing or corrupt file system.
     
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • I can't download anything, because error "the Windows Installer Service is not to be accessible"

    Windows Installer service could not be accessed. This can occur if you are running windows in safe mode or if windows Installer is not installed properly. Contact your support team.

    Troubleshoot Windows install

    2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

    http://support.Microsoft.com/kb/2438651

    Substitute:

    Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

    1. in the menu 'Start', click on ' execute:.»

    2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

    3. in the menu 'Start', click 'run '.

    4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

    If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

    For more information, visit the below mentioned link:

    http://support.Microsoft.com/kb/290301

    ------------------------

    Click Start Orb, in the box, type search: Regedit.

    Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

    Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  • "The Windows Installer Service could not be accessed. This can happen if Windows install is not properly installed. Contact your support team. »

    I use Vista 64 Ultimate.

    The last item I have installed is iTunes 8. I managed to install, but a few hours later the error pops up.

    I can download is nothing more.
    I can't install anything.

    When I go into computer management and try manually a start, I get this:
    "Windows cannot start the Windows Installer service on Local computer.       "Error 216: 0xd8.

    I can't update anything.

    As I said earlier, when I try to download anything, it looks like it is downloading but no files appear in fact where they should be.

    Please help, I have ALL my work on this computer and I didn't save anything. :(

    Hi VVinter

    Thank you for using the Microsoft Answers Forums!

    We can try a few steps listed below and check.

    Step 1:

    Run an on-line analysis of your PC of malicious software:

    If you want to scan your computer for malware and potentially unwanted on a Web site, please use the Windows Live OneCare safety scanner.

    You can also run Anti-Malware on your computer. Follow the steps in this link:

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

    Step 2: Windows Service install

    To check if the Windows Installer service is set to Disable, follow these steps:

    1. Click Start, click run, type services.msc in the Open text box, and then click OK.
    2. In the list of Services (Local) , right-click Windows Installer, and then click Properties.
    3. If the drop-down list Startup type is set to the value off, select the Manual option in the drop-down list Startup type , Start the service and then click OK.
    4. Click the file menu, and then click exit.

    You can also try to download the latest Windows Installer and install it:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    Note: Uninstall one already present in your system to-> program and features in the control panel.

    Hope this information was useful.

    Let me know if it worked.

    All the best!

    Thank you and best regards,

    R uma - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error 1719: The Windows Installer Service could not be accessed

    Original title: Please help, almost nothing works: video, audio, internet, most of the programs.

    It is a long story and it arrived a bit at random so I have no idea where to start, but I'm going. While trying to install autodesk software, I received the message: Error 1719. Install the WIndows service could not be accessed. This can happen if windows install is not properly installed. Contact your support team. I didn't know what to do so I rebooted and that's where the trouble started. I'm unable to play any audio or video. I am unable to connect to the internet as there is no connection available, but I'd just been connecting to my wireless home network earlier. I am unable to do a system restore because I got the message: System Restore is not working properly on this system. A volume shadow copy Service component has encountered an unexpected error. See the log even application for more information. (0 x 80042302). I think that this problem may have to do with a corrupt registry or some proxy problems or something. I tried to reinstall drivers, but I'm unable to access my cd drive to launch the backup drive drivers provided by microsoft. Please help me, I dual boot ubuntu is how I can access the internet. It must be a software problem if I have my other OS works perfectly. NEEED HELP SO BADLY. THANKS in advance.

    Hi cweb512,

    ·        You have opened a session in normal mode?

    To check that we will follow the tests below:

    (1) you see the mode without fail at the ends of the screen?

    (2) otherwise, and then check the status:

    a. click on start

    (b) in the search box, type msconfig

    c. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    d. under the general tab, make sure a Normal startup is checked.

    e. If not click the option and restart the computer

    Check the status of the Volume shadow copy service and the Windows service install in the services window. Use the following steps to check:

    a. Click Start and type services.msc in the search box

    b. search for services

    c. make sure that the startup type is automatic. Steps to set the auto services

    d. right-click on the service

    e. If the service is stopped and then starts the service

    f. Select Properties

    g and in startup type, select automatic

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

    1,2,4 and 5 do not work

    for some reason any when I tried to do the method 3 and go into services, it won't let me change the settings...

    Make sure that you do not take to remote procedure (RPC) Locator call *.
    Right click on the remote procedure call (RPC) > Properties. Can change you it now?

    t-4-2

    I have the same problem, even though this post is very old. and no, it won't work

  • Error Msg When trying to download the free program office: "the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

    Please see the msg of error under the title above.

    Office:

    http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

    Office newsgroups

    http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

    Discussions of general issues of the Office.

    They will help you with your office questions when repost you in the Office discussion groups above.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • Shared STM vs variable

    From what I saw on the forum so far, it seems to me that, compared to a shared variable, STM is better with different data and larger size data type. The only thing that makes the slightly better shared variable that the STM is to be a little more si

  • OfficeJet j145 all-in-One black print quality deteriorates

    When printing of plain black text (ie. text in a Word document) deteriorates print quality.  Black text seems to be more than a dark shade of grey/purple.  If the printer does not receive heavy use I have never had to change the printheads.  I ran a

  • C2960 with RADIUS

    Hello, everyone! I have a problem with the dynamic assignment of VLANS. The Setup is actually the following: RADIUS host - Switch - Server I have no problem with authentication, messages without any problems. The thing is that the switch does not see

  • 10 items crashing on launch

    I get this error message:Signature of the problem:Problem event name: BEXApplication name: PhotoshopElementsEditor.exeApplication version: 10.0.0.0Application timestamp: 4e5e8736Fault Module name: WinTab32.DLL_unloadedFault Module Version: 0.0.0.0Tim

  • whenever I update indesign, the software goes back to the french version and I lose all the keyboard shortcuts...

    whenever I update indesign, the software goes back to the french version and I lose all the keyboard shortcuts...